I am having problems switching from keyboard input to either letter or block recogniser. having changed the settings throught the input, it just reverts back to keyboard as soon as I exit - anyone any ideas?
Did you install any additional SIP ? (like HTC Keyboard + Keypad maybe)
The only thing I have done since receiving the Kaiser if flashed it with the HTC Rom and installed the Kaiser Tweaks.
Related
I have an European version of the Kaiser/TyTnII which I loaded Remote Desktop for WM6. I connect to my VPN using this after entering through SonicWall using Sonic's Pocket GVC. When connected I find that I can't use certain keyboard keys (both screen and thumboard) and others I can only use in Caps mode. Has anyone heard of this issue?
Thanks.
I had a similar problem some time ago. I was pretty clear to me that it had something to do with the keyboard mappings which weren't identical on the Kaiser and my computer(keyboard). I have no idea if there is a better solution out there, but this is how I fixed it:
Solution: Add support for a second keyboard mapping to your OS
Go to 'Control Panel'
Go to 'Regional and Language Options'
Go to the second tab 'languages' and click on 'details'
Choose 'Add'
Add 'English (United States)' and click 'Ok'
Close the opened windows.
In the taksbar you should see now a blue button with 2 letters in it. These letters represent the keyboard mapping you are using. By clicking on it you can change the keyboard layout.
Next time when you connect via Remote Desktop with your Kaiser, use your Kaiser to change the keyboard layout by clicking on the button and altering the keyboard layout. When you're finished, just click on it again and change your keyboard layout back to the original.
Hope this helps!
Thanks, i will give that a try.
VPN to SonicWall ?
I also have a European version of the Kaiser/TyTnII with WM6 Prof and I want to connect to a SonicWall TZ170. I tried Sonicwall's Pocket GVC but I could not install in on wm6 (not supported).
Could you give me more details about how you made the vpn connection the Sonicwall?
Thanks
VPN to SonicWall
I have the same problem with my HTC Touch Diamond (WM 6.1).
I can't find a VPN client. The one I tried only works with Windows CE Pocket PC 2003.
Anyone has found a solution to the problem?
Thanks
I was wondering if anyone has the same problem as I do. I am using ROM 1.34.8831.1 WWE and my word completion and word correction does not work.
I have tried START/SETTINGS/INPUT/WORD COMPLETION. but it changes nothing.
Comments or suggestions please..
Thanks
I encountered the same problem (I prefer the standard MS keyboard). I tried registry tweaks but must have missed something because still didn't work.
Then I installed KaiserTweak and in there disabled XT9 support and since then everything works great.
But again, that's for the default keyboard, it did work without tweaking on the diamond keyboards.
Keyboard
dutch64 said:
I encountered the same problem (I prefer the standard MS keyboard). I tried registry tweaks but must have missed something because still didn't work.
Then I installed KaiserTweak and in there disabled XT9 support and since then everything works great.
But again, that's for the default keyboard, it did work without tweaking on the diamond keyboards.
Click to expand...
Click to collapse
I am using the MS keyboard. I will try your other suggestion. Thx
update your ancient rom.
billybobjones said:
update your ancient rom.
Click to expand...
Click to collapse
I am now using a modern ROM and it still does not work... any other suggestions
word completion with block recognizer
Hi
HTC in Australia) support clearly advise that word completion will not work on Touch Diamond when using block recognizer.
Is there anybody out there that can add this feature to the Touch Diamond - even if it is not available on other input methods?
Word completion does work for block recognizer, do as dutch64 mentioned.
Strange...i have exactly the oposite problem
i don't like word completion feature, and so i try all ways to disable it (from settings menu and from Advanc. conf. tool), but i only get it 100% disabled when i use Panosha ROMs ...
Hi all,
just got my topaz and flashed a cooked ROM (wm 6.5 LP EVO V-ITA to be precise).
i really need to enable block-letter recognising, after years practising i cannot live without...
afer some search, i have tried editing this
For letter recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
For block recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429691-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
but apparently is not working
can somebody pls help me?
thks
GG
gnarolibero said:
Hi all,
just got my topaz and flashed a cooked ROM (wm 6.5 LP EVO V-ITA to be precise).
i really need to enable block-letter recognising, after years practising i cannot live without...
afer some search, i have tried editing this
For letter recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
For block recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429691-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
but apparently is not working
can somebody pls help me?
thks
GG
Click to expand...
Click to collapse
I have a cab (thanks to !Aman!). You can get block recog.cab from my Topaz File Mirror.
thks but is not working...
anybody knows the proper registry tweak?
thanks in advance
gg
"]!Aman![/URL]). You can get block recog.cab from my Topaz File Mirror.[/QUOTE]
gnarolibero said:
thks but is not working...
anybody knows the proper registry tweak?
thanks in advance
gg
Click to expand...
Click to collapse
strange it works for me on WM 6.1
what ROM are you using it for?
BeeGee_Tokyo said:
strange it works for me on WM 6.1
what ROM are you using it for?
Click to expand...
Click to collapse
I'm trying to get the Block recognizer too.
It seems to me that Microsoft blocked it in WM 6.5
EzInput 2.1 doesnt support old SIP methods like block recongniser, thats why it doesnt work for you guys.
!Aman! said:
EzInput 2.1 doesn't support old SIP methods like block recognizer, that's why it doesn't work for you guys.
Click to expand...
Click to collapse
Hey Aman, but at Microsoft WebPage, they talk about the input methods for WM 6.5 and Block/Letter Recognize are there !!!!!!!
I though that the nes versions of cooked ROM's would be able to have then too.
Finally working BR and LR
Originally Posted by NothingBetterToDo
So sorry for keeping you guys waiting. The following are the steps I took based on my memory.
To enable the Letter Recognizer SIP, set this to 1:
HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSipInputMethod
"Default"="1" – Enabled
To enable the Block Recognizer SIP, set this to 1:
HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\IsSipInputMethod
"Default"="1" – Enabled
You will notice that this will not make the SIP appear, for example, in your SMS application. However, it should appear in the pulldown menu at Start->Settings->Personal->Input. Now, if you try to set the Letter Recognizer as default, thinking that it will appear in SMS application, it doesn't. For some reason, it will always default back to the Touch Input (or EzInput) SIP.
So, the next step is to make the Letter Recognizer SIP the default. To do that, check the value at
HKEY_CURRENT_USER\ControlPanel\Sip\DefaultIm
It should be "0654897B-B359-473F-B28B-D85CF601C57F" (for Touch Input SIP). Replace that with
"42429690-AE04-11D0-A4F8-00AA00A749B9" (for Letter Recognizer SIP).
WARNING -- very very important to make sure the above is entered correctly. According to some posts elsewhere, a non existent SIP can crash your device. You might want to confirm if you have the Letter Recognizer SIP by searching for the msim.dll file. If it exists, I suppose it is probably safe.
After soft reset (power on/off device), you should now see the Letter Recognizer in your SMS application. However, you will also notice it doesn't work properly. For eg, the Capital Letter (left panel) doesn't work, there is this irritating word suggestions thing that keep popping up, it is quite slow and quite inaccurate, the Help doesn't work well.
To resolve these problems, set the following to 1:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ezsip\IsOtherSip
Do a soft reset and the problems should disappear and you have a good Letter Recognizer to work with (even with fingernail), save for the following problems:
a. Sometimes response may not be very good. Can be quite slow especially if you are entering letters like "i", "r". Maybe this is because of the screen sensitivity.
b. If you click on the little triangle and want to switch to the Touch Input SIP, you can. But the problem is that you can't switch back to the Letter Recognizer anymore unless you do a soft reset. I guess this is OK if you use Letter Recognizer exclusively, but if you want the Chinese Handwriting feature in Touch Input (which is pretty good IMO), then it is not good.
Sorry for the long post. Thought it is better to also share my observations. I am a newbie with registry thing, so I prefer to do step by step and hence many soft resets. If you are gungho enough, just do the steps in bold followed by a soft reset. Hope it works for all you guys.
Note -- if you don't feel safe doing the registry changes, an alternative is to use the Touch Input SIP but set the waiting time to the shortest possible which will reduce the delay. But it is still very irritating to use IMHO.
Cheers
Just to remember all that the solution I described at the previous post is not mine and was Originally Posted by NothingBetterToDo. So, many thnaks to him for the great solution !!!!!!
Info for the ones that doesnt have en version
Hi
Info to all of you with other language then english.
The file msim.dll are country specific, in sweden its called msimsw.dll so i guess you will be able to find your version if you search the registry for msmi and then you will find a msmiXX.dll that is the correct one for your country.
I hade to add the info for {42429690-AE04-11D0-A4F8-00AA00A749B9} and {42429691-ae04-11d0-a4f8-00aa00a749b9} because it was missing info so it's not enought to only change the IsSipInputMethod to 1.
I have attached the files i used, but plz realise that this one is for swedish a version. You can edit the files with notepad to adress the localized .dll file for your country.
After this to be able to use the input methods i did what nicksalgado said and change
HKEY_CURRENT_USER\ControlPanel\Sip\DefaultIm
to {42429691-ae04-11d0-a4f8-00aa00a749b9} to use Block recognizer as default im
/SebulbaSe
Hi
I have the "RUU_Topaz_S_HTC_SPA_2.16.412.1_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship", and has the same problem that you describe. I use the HTC Pure from AT&T, and in the original AT&T ROM the Block Recognizer work it just fine. Is there a way to captura a cab to use to solve this problem from the original AT&T Rom?? Regards
OK The tweak worked for me. Now I have got rid of that annoying keyboard. Anyway I would like to have the option of choosing the keyboard in a drop down list like before the rom update. Now the block recognizer is the one and only input method.
yulbeast said:
OK The tweak worked for me. Now I have got rid of that annoying keyboard. Anyway I would like to have the option of choosing the keyboard in a drop down list like before the rom update. Now the block recognizer is the one and only input method.
Click to expand...
Click to collapse
Use this app to choose your SIP.
Activation of the Letter/Block Recognizer cookbook
Hi all
thanks, it works perfectly on my Topaz.
How to desactivate properly and completely block recognizer (register and so on) of my Topaz now, because I want tu use the SPB Back Up of my Topaz on my Touch2..and I am sure I will Have some problems with this change..?
Thanks
It's not a good idea to use a full backup file from one device to a different one.
Hello,
I have the Freedom Universal Keyboard and on my previous device, HTC Tytn with WM5 I used a bluetooth keyboard remapped with AEKMapper for my Czech layout. Everything worked just fine, even when I didn't install the drivers from manufacturer and used the ones in WM5.
Now, on the HD2, I could pair it right away and it worked in its original layout quite well(even though I couldn't use shift to select a text going over multiple lines, just on the line of the cursor, and AltGr didn't work at all).
I installed AEKMap in its newest version (1.3, free) and loaded my own layout that I used back on the Tytn. BUT as soon as I hit Load Now to load the layout, all the keys that are somehow remapped stopped working. Now I could just type the letters that I didn't mention in the layout script at all. So useless for me. After unloading the layout in AEKMap everything works back in the English layout.
I need my layout, because without it, all the special characters (?!,.-= etc.) are in different places and since I have Czech layout on my home keyboard, it's confusing PLUS my school notes look sucky and they're difficult to learn without diacritics like carons and acutes.
PLEASE help me. As we speak more and more of my school notes are being written improperly...
EDIT: solved, just selecting a SIP keyboard other than the HTC one enabled the remapped characters. Did not enable the hotkeys like Alt+stuff for special characters or Win+stuff to launch programs.
Hello! I am finally a new happy owner of a Galaxy Note!
Its not perfect, I think the Dell Streak was easier to use (very hard to hold it in left hand and NOT press Power, Volume Up/Down buttons).
Anyway - I have much more serious problem:
Any outgoing SMS message in hebrew, is seen as question marks by the recipient (even using another Android phone as well).
Only clue that I have is, when I finish typing the message and click on Send, I get Warning (Attention) as follows: "Message may be corrupted on recipient device. Change input mode to automatic"
I am not sure what this mean?
My other problem, is that no other keyboard (like Anysoftkeyboard, or Swype), seem to allow language swapping using the Spacebar - which I found very comfortable (and swype not supporting hebrew at all) - so I must find a way to incorporate Hebrew into the Samsung Keyboard please.
Another potential issue, is that I feel the Stylus might not be functioning correctlly - it requires more pressure than I am used to, with my Dell Latitude XT2, which I use to write all lectures and practice at uni - perhaps something is wrong with my pen? or is it right that I have to apply what I would define as "moderate" pressure for it to even register on the Note taker?
ok, I solved my own problem for SMS:
When in Messaging center, click Menu, then Settings and go to Input Mode - change it to Automatic.
Hope it helps others who search for this dumb default setting on GSM alphabet (why??)
Still having the problem with Hebrew for the Samsung keyboard to switch using Spacebar
how did u get the hebrew keyboard to work, as when i try to type in hebrew the keys are not displayed correctly
hykhleif said:
how did u get the hebrew keyboard to work, as when i try to type in hebrew the keys are not displayed correctly
Click to expand...
Click to collapse
I am using AnySoftKeyboard, with added Hebrew keyboard addon.
It works fine, keys are displayed correctly out of the box Samsung ROM.
that is so weird because I have also used anysoftkeyboard and the Hebrew addon but the characters are not displayed correctly at all.
Although I have the Arabic rom installed which has RTL support
very weird
hmm, mine does not have Arabic option.
Is there any chance the distributor in your country decided on his own to make Hebrew intentionally not work on their ROM? (unlikely, but not unimaginable...)
Your alternative is to reflash the ROM to one Euro version.
Go settings-->Application-->All-->Messaging-->Clear Data
Hope this helps.
I need to add Portuguese language to the Note II T889. I know the Note II N7100 has it on it. How can this be done? Anyone? There has to be a way to import the Portuguese Language if the N7100 has it on it??!!??