I have G4 Wizard and i followed these steps http://forum.xda-developers.com/showthread.php?t=310831 only instead of soft SPL i done hard SPL. Iwanted to install XDA Mobile 6 ROM but when i want to install it my device restarts to bootloader mode and my update utility then cant find the device. Please help me.
[FIXED]
Related
hello, everybody, i just upgraded my O2 XDA MINI S with AKU 3.2, it stopped at 99%.
Now, my phone cannot start up, cannot connect with PC at all.
Please do help. thank you very much
you must install a rom with bootloader 1.x eg.(buttons 1.05 rom)first then a rom with bootloader 2.x eg.(molski 30mb rom) then you can install a AKU3.2 rom.
this solved my 99% hang and i am 99% sure it will solve it for you. please reply if it works.
could you please tell me how to install a rom with bootloader 1.x eg.(buttons 1.05 rom)?
my phone cannot connect with the PC at the moment.
Many thanks for your help
if you waited to long during the hang and the battery drained then i think you might have a brick if not soft reset and install buttons rom
it it is in bootloader mode then the rom installer will connect to the device
thank you very much, where i can find a 'buttons rom'. Really sorry to trouble you, i am not familar with upgrading at all.
my phone cannot start, after reset, it shows IPL and SPL, then reset itself again and again.
What i can do if it can not connect with my PC?
liuyin430 said:
my phone cannot start, after reset, it shows IPL and SPL, then reset itself again and again.
What i can do if it can not connect with my PC?
Click to expand...
Click to collapse
Before anyone can REALLY help you you need to post a little more info.
What IPL/SPL Versions are currently on your device.
Do you know if you have a G3 or G4 flashchip?
IPL/SPL 1.05
G3
the problem is it cannot boot at all.
thanks every body.
Hi,
I tried flashing my rom using the shell tool today and it did not work. So I tried a hard reset and now its stuck in the first screen where its a blue background and it says
IPL 2.25
SPL 2.25
GSM 02.25.11
os 10.2.0.8
I was able to get past the RGB screen but now I have no idea what to do.
I tried flashing it to the WM6 if that helps anything and it was on the official cingular rom before
Why are you using the Shell Tool when you have a G3 (based on the IPL / SPL that you posted)? Just CID unlock your device and save yourself a ton of headaches.
http://forum.xda-developers.com/showthread.php?t=298613
And yes it helps to know you are flashing WM6, but which one?
I was trying to flash it to PDAMobiz_Wizard_WM6_G3_AmazingRom_V.1.1_by_Hong.exe
I got my machine back to the 225 rom but I just cant seem to get the instructions on flashing it to work as I cant flash to button, wizard love, or tmobile and therefore cant get it to flash properly.
just throw it in bootloader mode (press soft reset with the stylus and then quickly hold the camera button.) When you get there just connect the wizard to the usb port and flash with the latest official rom. It really should work
I did. my problem is trying to get it to WM6. I have tried the official rules by the doctor, but I cant unlock it and I cant downgrade the rom. I cant install the tmobile rom as well. It seems every rom I try to install does not work.its driving me crazy.
Why can't you unlock it? Dr. P's unlocking instructions with Lokiwz are pretty straightforward and easy to do -- if you follow them step by step. There's no reason why you shouldn't be able to unlock it.
PLUS -- once you're unlocked, you can flash to ANY ROM -- ANY TIME. No need to downgrade and re-unlock every time you want to flash a newer, better ROM.
I followed the instructions. But they did not work for me. I cant goto either of the roms suggested and I cant unlock my phone. it just doesnt work for me.
ecomajor said:
I followed the instructions. But they did not work for me. I cant goto either of the roms suggested and I cant unlock my phone. it just doesnt work for me.
Click to expand...
Click to collapse
You can't even downgrade to button's rom? What's the error you're getting. Give us some info we can help you further with!
ecomajor said:
I followed the instructions. But they did not work for me. I cant goto either of the roms suggested and I cant unlock my phone. it just doesnt work for me.
Click to expand...
Click to collapse
I hate to say this, but if you did follow the instructions it would work. You really can't skip steps.
--M
The error I am getting downgrading to button is
error 260 - update error
I get this with all roms. I have restarted my pc numerous times and done other things to try to get it to work but alas nothing helps.
ecomajor said:
The error I am getting downgrading to button is
error 260 - update error
I get this with all roms. I have restarted my pc numerous times and done other things to try to get it to work but alas nothing helps.
Click to expand...
Click to collapse
17 ERROR [248~260] : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
--M
@ecomajor
The solution for your problem might be in this thread.
http://forum.xda-developers.com/showthread.php?t=276963
Give it a shot
One last thought --
If you can't downgrade to Buttons' 1.05 ROM to unlock, maybe you could downgrade to the original Cingular-shipped ROM, which is v1.08.
I've uploaded it to Rapidshare for you if you want to try it.
http://rapidshare.com/files/23672884/RUU_Wizard_1081101_10811103_10910_Cingular_WWE_Ship.zip
--------------------------------------------------------------------------------
Hi everyone
I failed to upgrade my Trinity Radio or to WM 6 also at the same time i cannot install any hard Spl
i get an error 270 or 260
i tried soft reset first.
but nothing seems to work
ROM version : 1.23.405.2
Rom date : 3/11/2007
Radio Version : 1.38.00.11
the bootloader menu shows the following:
TRIN100
IPL-0.5
TRIN100
SPL-1.07.0000
update1: when i try flashing it get 1% and stop and it goes back to the tri color screen with no change in the spl version.
Thanks
Best way to upgrade is to put your device manually in bootloader :
http://wiki.xda-developers.com/index.php?pagename=Trinity_Resets
Then install hard SPL (personnaly i prefer Des' Crash-Proof SPL)
And after you will be able to install a Rom Wm6.1 of your choice !
To flash your device, prefer to put your device manually in bootloader...you will have less error message !
Hope this will help
hi try it but get error 270 all the time.
image is corrupted.
you should try to re-download the ROM you are trying to flash. If you still receive this error, refer to this thread . You basically have 2 options: 1) run SSPL manually from your phone, then run the RUU from the computer to flash the ROM or SPL you want.. or 2) flash using SD card flash method
http://trinityguides.info/index.php?option=com_content&task=view&id=43&Itemid=67
Please take a look here:http://www.trinityguides.info/index.php
Bye
hi how can i charge the battery?
hi how can you charge the battery as i can only get the phone in boot only ????????? help me as i need the phone back on as i need tomtom.
thank you
Thank you all
Hi like to say thank you all for your help,
got the phone working now:d
Good to know. Thx for giving feed back. Enjoy your device then ...
I have a big problem. My SPV m700 was unlocked and working. I tried to change the rom and at 75 % I got an error. When I started the phone the scrren was blank. I have hard reset it. My spl version is 1.7.000 or something. I thinik is the original one. I wasen't able to put any other spl version. I get stuck at 1 %. The first time I have managed to change the spl was when the phone was working. Now is a brick. I still can enter in the tricolor screen. Is there any hope? Can someone help me? Thx a lot
HTC Trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/20284524...12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
http://rapidshare.com/files/203126613/1.56.70.11.exe
Hello forum,
I have a problem with some kind of internal protection of Windows Mobile when I try to upgrade my SPL.
Following happened:
I started ROMUpdateUtility.exe, but when it tried to install a new SPL version, the Active Sync connection was aborted with error 246.
How can I fix this? Maybe manually starting in bootloader mode before Hard SPL upgrade? However, ROMUpdateUtility doesn't recommend that and my PC crashes in this case.
PS:
I have already read this thread: http://forum.xda-developers.com/showthread.php?t=351395
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
go to olinex hard spl section and write about your problem maby they can help u
Onlinex hard spl section?
I must be blind. Where is that?
matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here
matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.
Tried both checked and unchecked and dont work
I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS
Great!!! I will remember that one too.