Hey guys ive been trying and trying for months almost on getting my phone CID unlocked so i can install wm6. Ive followed the directions many many times. Heres what ive done.
Downgraded to Buttons rom.
enabled the cab file on the wizard
ran the lokiwiz program
But now when i run it i get this error when CID unlocking it :
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
I tried to go ahead anyways because it said CID unlocked so i upgraded to Tmobiles rom and then tried to flash to a WM6 rom but it sticks at 99%
I have no idea why I cant CID unlock this device..
Guys i REALLY want to put the HTC Touch rom on this babe and I REALLY need your help if theres anything im missing or should do please post away i love this phone and this forum has helped me alot so far I know you guys can do it again.
keep up the great work!
- eddy
First flash to Button's ROM again until you get a working OS.
Then re-download lokiwiz and EXTRACT WITH PATH INFO. Make sure you see "Utils" folder after extraction.
Then install EnableRAPI.cab and unlock again, then it will be fine. However note that there should not be any error message shown both in Wizard and lokiwiz during unlock.
what version of lokiwiz do i use ?
0.2b (0.3 does not have CID unlock function)
Related
can some one help me
I would like to update the rom of my k-jam to this one
K-JAM_WWE_216901_2169101_020710_ship.exe
mi k-jam is italian I think that I should use LokiWiz to upgrade to that rom
after at least 10 try alwais with tge same ERROR [294]: INVALID VENDOR ID
I'm here to ask to some kindfull forum user a step to step howto for rom upgrade
thank
Fixed
I only modify the path in the given bat file given with LokiWiz
I'm upgrading now I hope all will work
How?
Could you be more specific on what you did... I have the same problem with the Dutch T-mobile Rom. I did a CID unlock with Lokiwiz but this didn't fix the problem. PLease help me...
Sounds like you have to do the SIM unlock too..... use the 'U' option.
When I upgraded my ROM I done the following.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
Hope this helps
Hy guys...i have a problem, my device stucked in bootloader mode..can someone help me? please, IPL 2.18, SPL 2.18
soft reset
i tried to install another rom, but on 98% stucked...can i put wm6?
come on... help yourself, have you cid unlocked? what was the error message?...
so, i tried now to install a wm5 version, and on PC it's showing 99% and i'm still waiting about 1h, and on phone 98%
i repeat
bbobeckyj said:
have you cid unlocked? what was the error message?...
Click to expand...
Click to collapse
i read "how to cid unlock" but it is written there to copy a file on ppc memory, but i can't enter on it, only in bootloader mode
ok, you need to flash the rom that the device came with ( o2, cingular, vodaphone, tmo etc) then cid unlock
i understood that..but i don't know what rom do i need, because i have brought at second hand, from a guy, and it was in french, and i tried to install in english, but stucked on 98%
you'll have to try each french rom until one works
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
i can only see 2 french roms on the wiki, both are qtek, is that what your wizard is branded as?
also try the 'button rom' and then cid unlock
it's past my bedtime now, i'll check this in the morning. but short of holding your hand and giving a button by button tutorial, you know everything there is to know
yes it is qtek...thank you very much, i will see what i can do..i will let you know about the results
i can't download the files, because was deleted
it worked..thanks, without cid unlock, but thank you anyway for you time
now, you must cid unlock before flashing another rom
i tried to do that, and when i want to downgrade to button's 1.05 ROM it's getting stucked on 98%
now..i've made it again...i have wm5 on it..i made cid unlock, but my problem is that every time i try to install wm6 on it, it appears to me wm5...why? with each version
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
http://forum.xda-developers.com/showthread.php?t=306501
JoelC said:
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
Click to expand...
Click to collapse
which are the steps? please give it to me a link...i wrote in the first post the ipl and spl
you can type, so you must be able to read, yes?
we've both given you the link more than once AND it is in my signature in all of my posts. what more can you want?
Hi to all.
Mi Mteor have SPL2.05 and is application unlocked now.
The instructions says that i have to get hardSPL-1.40 in order to can CID-UNLOCK the device. Where i donwload it?
When i run the AUTO_Unlock_v3a.bat , the device no reboot in bootloader mode. Only get a blank screen.
Please, help me.
Yhanks. Sorry for mi bad english.
just read wiki and other posts here... it is still explained here...
you have to enter the bootloader a nother way.. because when using the normal cid unlock file you use a herm enterbl.exe ...
but i prefer to use sspl and not to supercid the device...
I read it. Perhaps i donĀ“t understand everything, because english is not my primary language.
I see the are two metods to unlock the sim and CID. Supercid or SSPL.
I want to unlock the sim and update the rom.
Thanks a lot.
for simunlock just look into the threads in the past here... (pages on bottom of forum) ... theres somewhere explained how...
maybe i have also entered some infos in wiki...
for updating rom the easiest way is to app unlock the phone (to launch unsigned apps -> wiki) and then copy the sspl files to phones root...
a *.lnk file a exe file and a rom file...
launch the lnk file and then start the update you want!! ...
with the sspl method your phone is for one! start and only for that one! supercided! so that means you can install any rom ... no matter what provider is the rom from..
also you can flash than cooked roms... with no cid inside... (like my german rom...)
but remember ... when flashing because what ever not work, and you cant boot the phone up to relaunch the files... you have a problem when you don't own a, in your case so far i can see, a Vodafon Shipped Rom for Breeze...
innocent here in forum has the problem... vodafon gives no shipped rom out...
maybe you can ask them from different sides .... my vodafon partner here in austria (a1) did not offer the breeze... so i can't ask them... (i work in the co company...)
steve
I have a T-Mobile G4 Wizard. First I did a hard reset on my phone then I used the Offical T-Mobile Update utility. I downloaded SoftSPL uncompressed it. I put the nk.nbf fill in to the directory of SoftSPL. Next i ran SoftSPL. It when thought the cycle. (Tex was on screen then it went white.) I loaded BlackDiamond_3[1].1_Touch to phone. It completed and phone restarted. I set the phone up. Nothing changed on phone. It is still the same as T-Moble shipped WM5.
Am I missing somthing or am I doing somthing wrong? I dont understand why this isn't working.
Plz Help.
cid unlock your phone, you'll find tools enough here
crazy_man699 said:
I have a T-Mobile G4 Wizard. First I did a hard reset on my phone then I used the Offical T-Mobile Update utility. I downloaded SoftSPL uncompressed it. I put the nk.nbf fill in to the directory of SoftSPL. Next i ran SoftSPL. It when thought the cycle. (Tex was on screen then it went white.) I loaded BlackDiamond_3[1].1_Touch to phone. It completed and phone restarted. I set the phone up. Nothing changed on phone. It is still the same as T-Moble shipped WM5.
Am I missing somthing or am I doing somthing wrong? I dont understand why this isn't working.
Plz Help.
Click to expand...
Click to collapse
worstenbrood
G4 device cannot be CID unlocked,but it can be tricked into being CID unlocked temporarily by flashing the patched IPL/SPL (Bootloaders),however,it always remains CID unlocked.
crazy_man699
Perhaps you are not doing the procedure correctly,read the guide again and do it correctly,you might be missing some step,or it might be that it requires to be manually copy and paste 'EnableRapi' in the phone and execute it.
If at all it doesn't work,you can might try to do HardSPL.
CID Unlocked and Still not working!
Now I used HardSPL-G4 to Cid Unlock my phone. I check it using the wizard service tool and it is unlocked. I tried installing BlackDiamond_3[1].1_Touch to phone again but got an error so I used the RUU MUN utility. Everthing appeared to be working. The progress bar went to 100% and wizard restarted but. Nothing Changed again. Its still the origianl T-Mobile rom. I am very confused on what i am doing wrong.
Am I missing somthing or am I doing somthing wrong? I dont understand why this isn't working.
Plz Help.
crazy_man699 said:
Now I used HardSPL-G4 to Cid Unlock my phone. I check it using the wizard service tool and it is unlocked. I tried installing BlackDiamond_3[1].1_Touch to phone again but got an error so I used the RUU MUN utility. Everthing appeared to be working. The progress bar went to 100% and wizard restarted but. Nothing Changed again. Its still the origianl T-Mobile rom. I am very confused on what i am doing wrong.
Am I missing somthing or am I doing somthing wrong? I dont understand why this isn't working.
Plz Help.
Click to expand...
Click to collapse
Are you sure its a G4 device,coz WST tool can never confirm a G4 device to be CID unlocked,A G4 device can never be CID unlocked.
ok,run the WST tool and click the 'Device Info' button,post the report it generates here now,it'll confirm that DOC chip version of the phone with IPL/SPL,ok
true, forgot that, it was the qtek prophet g4 that you could unlock, for the wizard i had to flash 3 roms before flashing a cooked rom, there is some good tutorial here somewhere
does a G3 Cingular 8125 wizard need to be unlocked if i want to put the official at&t wm6 rom on it?
and could somebody explain how u would go about doing that, i've looked at all the guides, im still lost. thanks!
greatunclebob said:
does a G3 Cingular 8125 wizard need to be unlocked if i want to put the official at&t wm6 rom on it?
and could somebody explain how u would go about doing that, i've looked at all the guides, im still lost. thanks!
Click to expand...
Click to collapse
Yes a G3 8125 Needs to be unlocked and you'll find all the guides on the forum there are no better guides than those coz they are written by professionals. TC
step 1 download this file rar password is - scousemartin
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
step 2 - flash the button love rom inside the rar file you just downloaded
step 3- run lokiwiz to unlock your device. Once that is done you can flash any rom, you can flash the at&t rom or the xda o2 rom i have included in the rar file ( the o2 rom was put in there as it was for my own use)
If you flash any official rom ,you will need to CID unlock it with lokiwiz ,the next time you try to flash it, as the official roms will CID lock the device again.
scousemartin said:
If you flash any official rom ,you will need to CID unlock it with lokiwiz ,the next time you try to flash it, as the official roms will CID lock the device again.
Click to expand...
Click to collapse
NOT TRUE! Once a device is CID unlocked it remains like that permanently!
Unlock tools write "11111111" to the CID location while RUUs never touch it. Only with WST you can write any CID value to the area again.
still no luck, ive disabled the windows firewall like one of the guides on here said, i had an active sync connection as guest, i downloaded that rar file and ran the button rom, and still i get the error 260. after i start the rom it crashes active sync i hear the disconnect sound, then the phone turns off and i have to do the recovery thing. i havent seen any weird colors either, i've heard ppl get a three color screen or something. but mine just turns on and i have to take the battery out and try all over again
Mods! plz check this out.
problem solved, i never realized that i still had my storage card in the phone, after i took it out everything went smooth