Is there a way to wake the phone from its sleep mode without opening up the keyboard? That's the only way I can figure out.
Thanks!
A quick press of the power button on the side will wake it up.
This is written in the instruction manual.
You should have read that before using the phone.
reaffect power button
is-it possible to use another button instead of the power button in order to power on/off the screen?
Yes - if you disable the setting that stops all the other buttons from waking the device up (to avoid answering calls and making calls etc when its in your pocket).
man that power button is hard to push though. am i the only one who has trouble finding it by touch alone? i was thinking of carving out an indentation in the casing to help my thumb 'find' it, but thought better of it....
demione said:
man that power button is hard to push though. am i the only one who has trouble finding it by touch alone? i was thinking of carving out an indentation in the casing to help my thumb 'find' it, but thought better of it....
Click to expand...
Click to collapse
what i do is set the keys to lock when the phone is locked then use s2u to serve as the lock. I havent accidently called anyone yet so i think its the quickest way to resolve the issue not to mention i like the way it makes my phone look
demione said:
man that power button is hard to push though. am i the only one who has trouble finding it by touch alone? i was thinking of carving out an indentation in the casing to help my thumb 'find' it, but thought better of it....
Click to expand...
Click to collapse
I saw someone did a simple mod to make it easier to find. Dont remember where i saw it. if it find it'll post a link.
but what they did was bought a little "nub" from a craft store and glued it to the power button to make it stick out more so it was easier to find. It looked pretty good and probably did help in this situation. I've thought about doing the same.
That said, I essentially did what Neva said in the last post. I use S2U2 (Slide2Unlock2) to lock the phone. And I set my phone to be "awakened" by any key press. And S2U2 is config'd to always run on wakeup. So I can't make a phone call by accident. it works great.
You can set the phone to awaken on any key press by setting here:
Settings | System | Key Lock | Do not lock buttons
Here's the link to the Power Button mod...
http://forum.xda-developers.com/showthread.php?t=344967&highlight=power+button
Amazing what you can find if you search the forum.
Related
This one's got me stumped, I may just be overlooking a simple answer but it hasn't happened previously on my Magician or Vario before.
I carry my Vario III around in a large coat pocket for most of the time. I have a lot of appointments and calls which activate the screen when they occur. I then have the problem when fishing around for the device that a) I answer the call from touching the screen, b) End the call from touching the screen, c) Open a load of different apps where the appointments have made the screen go live and the movement in the pocket has brushed the screen.
All I want to do is use only the hardware buttons ie. Answer, End, Power button. Where can I find the settings for this? The "key settings" menu or "buttons" doesn't cover it so where is it? It's driving me mad!
Hold down the 'red' phone button to lock all but 'Power' and 'Unlock' soft key.
You can still answer a call as normal when it comes in with the with the 'green' phone key.
Thanks. I know about the standard lock, but then you're into multi key press territory to unlock it. I just wondered if someone knew of a way (or program) that once the screen was off it stayed off until the answer, reject or power button was pressed and then in the case of the power button the device returns to "normal".
I'm not sure if your idea would be very viable. The screen has to come on so that you can see who's calling!
Pretty pointless to reject a call when you don't know who it is.
I understand what you are trying to get at but wouidn't you still have the problem of not being able to use any other functions within a call like looking up a Contact or checking your Calendar. Hitting the Power button during a call to get back to normal use would be a bit 'hit n miss'.
Thanks for the reply. I agree it's not ideal and I guess if it was something everyone wanted someone would have brought a .CAB out for it. That my Q answered in any case. Thanks again.
Try searching the forum for 'S2U2'. It might be what you're looking for.
That should cover it just fine. Thanks for the pointer.
Nice one helterskelter
Didn't think he would want to open it to answer a call thats all as he seems to have big fingers and hit everything but 'Answer'
No, sorry, just my dark humour...
Hope you are sorted.
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
How exactly do you keep pressing the power button till your finger hurts?
Vulpix said:
How exactly do you keep pressing the power button till your finger hurts?
Click to expand...
Click to collapse
hit it once does not hurt but every time it go to sleep and I have to hit the button to wake it up. that is when it hurts.
let say I set it to go to sleep every 40 sec. how many time does it go to sleep in an hours? at least couple times.
foxnews said:
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
Click to expand...
Click to collapse
I've found that the pressure required on the Power Button can depend on the particular Diamond. I've owned two US Diamonds and the first had a difficult Power Button while the second was much easier. Either way, another option to turn it on is to pull out the stylus a short distance - this will wake the Diamond as well. As far as using the center of the D-Pad - I've no idea . . .
wpsantennas said:
I've found that the pressure required on the Power Button can depend on the particular Diamond. I've owned two US Diamonds and the first had a difficult Power Button while the second was much easier. Either way, another option to turn it on is to pull out the stylus a short distance - this will wake the Diamond as well. As far as using the center of the D-Pad - I've no idea . . .
Click to expand...
Click to collapse
even though using the stylus is less painful but it takes more steps: get finger nail in the gap, pull it out, then push it back in. if you do these steps many time over an hour, it would be tidious task.
On my diamond responsivity of the power button depends strongly on where I'm pressing it. You can try to press it different ways and find out where you get most tactile feedback of the micro-switch. I have the impression that for me it is when I'm pressing from behind, more on the left of it.
You guys are insanely lazy...
Vulpix said:
You guys are insanely lazy...
Click to expand...
Click to collapse
lol i have to concur
I think that would be a very good feature for the phone. I am sure most of us would use it.
C'MON XDA EXPERTS, help us on this one...
foxnews said:
My finger hurts since I have to press the power button (small and flat) too many times a day to wake the diamond from sleep. you can argue that I can set the phone not to sleep but sleep is a must to save battery. using all keys to wake it up can cause any keys to be easily hit by accident, which drains battery fast too. Power button is meant to be used rarely, like the PC reset button.
is there a better way to wake up the diamond? is it possible to configure ONLY the OK (center) button to do this? like the iphone, you just press the OK button. it is big and does not hurt as much?
Click to expand...
Click to collapse
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
Yes, but other keys such as volumn, home, back, answer and end key are also unlocked. Anyway, there are all hardware keys available to press opening the phone in additon to the default on/off button. I am now using this option.
ya but they will complain that all the buttons are unlocked. that method is just TOO easy.
edit: OMG i was right. and too slow. hahaha
maybe next time the phone can get u a beer or work for you...man...
Surely this is the Answer..?
OK, the way I see solving this is to have the phone wait longer before auto-locking.
To sort this, go to the following..
Start\Settings\System\Power\Advanced..
Go to 2nd option - It's a tick Box labelled "Turn off Device if not used for.." and adjust it to suit..
This is found in the manual..?
Cheers,
Phil.
pointless response to a pointless thread...
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
well, it´s maybe less a matter of laziness than of speed, my last phone was a slider ... slide, it wakes up, slide, it goes to sleep - superquick
with the diamond it takes one step more:
I use the option "do not lock buttons" in combination with S2U2, most often I press the ok button and slide to unlock
to put the phone to sleep, I press the power button or use gyrator: I just have to turn the phone face down, than the screen goes off (with S2U2 locking)
hm, maybe I should have bought the diamond pro, but diamond is sexier
gtpete said:
start>settings>system> Key Lock .. then set to "Do Not lock buttons".
then all you need to do is press the centre button to wake the diamond!!
EASY
Click to expand...
Click to collapse
all hardware buttons wake the diamond then. at least on mine
And how do you turn it off without the power button?
hgrimberg said:
And how do you turn it off without the power button?
Click to expand...
Click to collapse
http://wmpoweruser.com/?p=982
OMG!!!
What a baby, hurting finger....c'mon!!
Power button switches screen on, same button switches screen off. Job done.
Have you ever hit your finger with a hammer and your nail goes black....That hurts!!!
I have searched, but I have been unable to find a solution to my problem.
During my searches, I have discovered that many people, like myself, often struggle finding and pressing the power button to turn on and off the screen/phone.
I current use S2U2, which is a great piece of software, and even better since it is free. I use S2U2 to wake my phone up. I have set my settings to not lock the phone when device is off so to unlock/wake my phone I simply press any of the hardware buttons, and I see the S2U2 screen.
However, turning the screen off/putting it in standby is more of a hassle since I have to try and track down the tiny power button. I have downloaded and tried several free remapping programs but none of them allow me to remap a hardware button to standby/lock the phone. Generally, they only allow me to remap a hardware button to a program or setting other than standby/lock.
I would like to know if there was a way to remap a button to put the phone in standby.
I use BlackMe , more info on the website...
You could also try putting some "puffy" paint on the power button. It's that 3D paint people put on shirts etc. that bulges up when it dries. It makes a nice little bead to hit rather than trying to press the little power button.
The Reaper said:
I use BlackMe , more info on the website...
Click to expand...
Click to collapse
Does this program put the Tilt into SLEEP/STANDBY or just blank the screen. The author does not make this clear.
it just blanks the screen. I will keep up with this thread though, I have always wanted my PTT button to be my power button.....
yeah, me too. I am surprised that there isn't a solution yet....
I've always hated the hard to find power button as well. The PTT button is so easy to find and press, yet I've never, ever, not once accidentally pressed it. Why can't the power button be as raised up as the PTT one? I've seriously considered taking my phone apart and machining a replacement power button that stuck out farther. I'd probably make it out of aluminum to make it look cool, too.
But I'd be plenty happy in the mean time with remapping my PTT button to be a power button...
Yeah, I don't even need all the power button powers... I know the power button is used to do other things other than turn the screen on and off... I just want to use another button to turn the screen on and off and suspend the phone...
SPB Mobile Shell allows you to toggle the screen, suspend and many other options. I don't know if I would purchase the program just for it's button enhancing ability though.
Correction SPB Pocket Plus not SPB Mobile Shell
You could also check out AE Software at http://ae.inc.ru/
I dont know if this is kind of what you guys want, but heres my 2 cents. Go here to this thread http://forum.xda-developers.com/showthread.php?t=431328&page=4 and download Dave Shaw's awesome remake of psShutXP in post #34 (its the newest version)
Install to your MAIN DEVICE cuz thats where these shortcuts point to, then pick one of the 2 shortcuts I provided and just drop them in your main \Windows folder.
Hold down PTT button
Long_PTT
Quick push of PTT button
Short_PTT
Now, you can either just quickly push the PTT button or hold it down (depending on which shortcut you chose) and xdaShutdown will pop up giving you the option to RESTART,SLEEP/SCREEN OFF, or COMPLETELY SHUTDOWN your phone.
So essentially now, the PTT is your new power button. To put in standby mode just 2 button pushes is required. 1 push on the PTT button, then another tap on the Sleep button.
But if your really lazy and just want to be able to push PTT button once to put it in Standby/Sleep mode, then all you would do is find out the command to put the phone in standby mode (sorry I dont know it), then open notepad on your desktop, then type the command something like, this is ONLY AN EXAMPLE (42#"\Program Files\xdaShutdown\xdaShutdown.exe"), then save the file as either Short_PTT.lnk or Long_PTT.lnk and then drop the file into your \Windows folder.
But what about one push on the PTT button to wake it up out of standby? (without setting it so that all buttons wake it...)
Wow, I am an idiot. Haha. I never thought about the "wake up" part. Cuz once in Standby, the PTT button would then be non responsive so it then wouldnt work for waking the device. That is a tuff one, I have no idea how to specify what button(s) are locked/unlocked when in standby.
No way, you're not an idiot! I (and others I'm sure) totally appreciate your input. I just happened to have thought this over many, many times. I very well may have to go buy a bottle of that "puffy" paint stuff... sure would beat a full disassembly of the device to make a new, pronounced button!
I'm hoping I haven't misread the problem here, but if it is what I think it is, then you can do it with just S2U2.
I have my TyTnII set up as follows:
No button lock
S2U2 set to lock when backlight turns off
Backlight to turn off in 1 minute
In Setting/Buttons, assign "Button 4 (hold)" to S2U2
So I use it in a similar manner to the original poster. I "wake" it with a press of any hardware button (and obviously unlock it with a slide on the screen)
I lock/stand-by it by pressing and holding the OK button (it goes into standby after 1 min of being locked)
Hope that makes sense and is what you are after.
(nb am not 100% sure that the ability to set an app to run on the holding of a button is standard - I might only have that functionality dues to having SPB PocketPlus installed - am sure someone will let me know!)
Yes! this is what I was going for... I didn't even think about using your solution. Thanks!!!!
Does anyone have a problem with the hardware buttons not waking the phone up? I have my key lock setting not to lock buttons, but most of the time, my phone does not wake up when I press any of the hard keys. However, when I use the jog dial, the phone will wake up, but none of the other buttons will work.
i'm not sure if this answers you question, but usually i push my home button to wake up my phone then slide the screen to unlock it, just like how i do with my iphone previously, no settings is done with my phone
Yeah, same, I always unlock my SGS with the Home-button..
Oh. Did not know that. I don't have the phone yet. Was just reading some people's thoughts about the phone and they were annoyed about the Power button being used to wake the phone. Guess, I should've researched it some more. lol. Thanks for the info.
Either way, I think I figured it out on how to enable/disable the other buttons waking up the phone if I wanted to in that thread I posted. Should be able to wake it up using the other buttons as well instead of being limited to the power button and the home button. Just gotta have root and edit the keyboard layout then push back.
the menu and back keys are capacitative keys, not really ideal for waking with if the phone is carried in your pocket or something
Hi
I like my nexus 6 but I don't know how much crack they had smoked by the time they had to decide where to place the buttons.
The buttons are not only all beside each other so you're always pressing the wrong ones, but they are dead center of the side of the phone so every time I pick it up I lock it by pressing the power accidentally. It also does not help that this phone looks the same upright as it does upside down, so you never even know which side to expect the buttons on.
Anyway. Is there a hack/app that would let me change the behavior of the power button? I want to change the phone to lock/standby on a double power button click. I wouldn't even mind a double click to wake! I do not want a double tap to lock. I don't want to rely on tapping on my screen.
Thanks for any help. I've tried popping the power button off my case which is great, but I hate relying on the phone to timeout before going to sleep. I'm not looking for a solution like that.
rizz2pro said:
Hi
I like my nexus 6 but I don't know how much crack they had smoked by the time they had to decide where to place the buttons.
The buttons are not only all beside each other so you're always pressing the wrong ones, but they are dead center of the side of the phone so every time I pick it up I lock it by pressing the power accidentally. It also does not help that this phone looks the same upright as it does upside down, so you never even know which side to expect the buttons on.
Anyway. Is there a hack/app that would let me change the behavior of the power button? I want to change the phone to lock/standby on a double power button click. I wouldn't even mind a double click to wake! I do not want a double tap to lock. I don't want to rely on tapping on my screen.
Thanks for any help. I've tried popping the power button off my case which is great, but I hate relying on the phone to timeout before going to sleep. I'm not looking for a solution like that.
Click to expand...
Click to collapse
With alternative launchers (eg Nova) you can assign gestures to homescreen or swipe up on dock icons...
In addition to using a different launchers, you could use something like Screen off and Lock which allows you to replace Google Now in your navring (swipe up from your navigation bar) to be a screen off option.
Neither are exactly what you are looking for, but it is the closest you will get without root and/or a custom ROM. With that you have more options, there are double tap navbar and statusbar to sleep options available. I would imagine Xposed would have some options as well.
Hey guys sorry for the late reply.
I actually do use the nova launcher and its pretty sweet. The issue is not to add more gestures to sleep the screen. The issue is that the power button is so easy to click by mistake. I was hoping for a double tap the power to lock or something to prevent it from locking so easily. I usually press it once by mistake when picking it up..but I doubt I will accidentally pick it up and click it twice consecutively...and if I do, well im sure it wont happen too often.
I have root I am willing to try just about anything so if someone knows of a custom rom that could offer this then that would be sweet. I saw someone mentioned it above. Interested!
Thanks again for all your help
Try Invisible Lock Widget. Works a treat every time. I've used it for years and not once has it not responded.