Related
Hi,
this is an great Site, with good info about the the BA.
but i dont find the right info to switch the language of the phone.
first of all the info give by the getdevice.txt its:
PH20B 0 B GER R T-MOB101 1.06.01 0 1 1.06.115 1.00.00 00.00
it's a very old settings.. right?
with one tuturial i have tried to upgrade to another similar version, also from the T-mobile, but it dont works. the xda3nbftool.exe gives-me a "head error"..
How can you find some info to switch the language and also do an update to the rom and radio version?
with one best radio version what wiil happen? i will get a better sound of the phone?
there any way to turn on the highvoice?
thanks, and sorry if my first post its too long
Regards
READ HERE ......
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
hi,
thanks, i have update this i-mate PDA2k (ExtRom version: 1.40.176) , but it hangs ups some times, and when i do the restart this dont comes up..
always when i restart, i have to do a hard reset. how can i solve this problem?
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
Seems to have appeared as the FINAL offical release from t-mobile for uk users.
I've not tried it yet but the number does seem to suggest it is a slightly lower version than the Dutch one
EDIT MDAIIIUser
Added to wiki
no surprises
build of 2003se identical to Dutch rom previously released:
version 4.21.1088 (build 15159.2.6.4)
Extended rom just hasth changed regional settings (english UK default)
Added to wiki
Still a lot of echo.
Can't pair my Motorola HS820, BA sees the HS820, but error on connecting.
Anyone a fix for the echo and for the BT problem?
Use 1.40 before, was less a problem compaired to 1.42
Please help.
Regards,
Max
Report Back - T-Mobile Rom.. One week or so on..
Hi All,
Wanted to feedback my impressions of the new 1.42 T-Mobile UK Spec Rom..
Well, it's been interesting.. I now have (or have had) most of the faults that everyone else is experiencing.. I never used to get them at all with the i-mate 1.40 Rom or the NL 1.42 T-Mobile Rom.. I have listed the bugs below..
1 - One Hard-reset when inserted into GPS Car holder
2 - Several occasions where I've "lost" the Storage Card (when serching for it on the device AND through Active Sync)
3 - Interesting situation where I've started TomTom5 and I've suddenly had to go through the set-up process again only to be told that there's no maps (Can only attribute this to an occasion where the Storage Card is not seen by the PPC - See above).. Solved by remove Programs, soft-reset then re-install off SD Card.. (quite annoying as I was lost at the time!)
4 - Occasional failure for BT Headset being recognised on an in-coming call (I use the Logi-Tech Pro).. Solved by Soft-reset..
5 - Sometimes, after soft-reset, get a low performance from the Device.. ie, after soft-reset and switching to phone where it takes a few seconds to "build" the phone screen..
Strange but as I mentioned above, I don't recall getting these bugs on the 1.42 NL Rom or the i-mate 1.40 Rom.. I might try a hard re-set on Monday then re-install my tomTom, etc to see if it carries on.. If it does, I MIGHT switch back to the either :shock:
That's it really.. I have had the early T-Mobile 1.06, the i-mate 1.40, T-Mobile NL 1.42 and T-Mobile GB 1.42 and finally the WM5 Roms and from what I've seen, I place them in this order of preference..
1 - i-Mate 1.40
2 - T-Mobile NL 1.42
3 - T-Mobile GB 1.42
4 - WM5
5 - T-Mobile GB 1.06
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
dazed and confused
sorry if I'm being simple but ....
I though this was the last offical rom
http://www.iris-global.com/t_mobile_download/download_manager_mda_com.html
MA_TMUK_11300_128_11200_SHIP.exe
Rather than
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
How did you maanage to find the link?
What is the diference between the builds - How can I find a change log?
What is the BA / MA?
:?:
See here:
http://forum.xda-developers.com/viewtopic.php?t=31360
No difference in UK and NL Rom..?
[email protected] said:
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
Click to expand...
Click to collapse
Hi Max,
The Rom is exactly the same and the only difference is the changes in the extROM that makes it either UK or NL Spec (ie, MMS settings, etc)
Hi Starfish - Perhaps you need to look at this for the answers to your other questions:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Oh, and BA is "Blue Angel" and MA is the "Magician" HTC Names for the devices..
Sorry I did'nt read close enough Magican vs Blue angel
starfish_001 said:
Sorry I did'nt read close enough Magican vs Blue angel
Click to expand...
Click to collapse
That's ok.. We all have to start somewhere.. 8)
Now, I'm not too sure how far advanced you are in Upgrading, etc but before you do, please remember the following that I put on another post on here..
MrPhilly said:
General Tips to you (and others)..
If you do want to update or upgrade then make sure you read everything through first.. Make sure you're happy in doing it.. Perhaps use the search function to read through others comments.. I would also recommend reading others comments about trying to downgrade from WM5 to WM2003SE to see what others have encountered
You will not believe the amount of people who end up posting questions when they've not followed the instructions from Wiki that I've pasted for you here..
Finally, if you are stuck, use the search command and describe your problem in the Keywords section, select Blue Angel from the Category and read through the posts relating to it before posting questions..
Hope this helps..?
Cheers!
Click to expand...
Click to collapse
How can I upgrade to a stable rom
I have tried the TMobile NL and UK version both give the Country ID eror with the extra numbers 17-17-38-38-38
How can I safely upgrade to the 1.42 version (I have read the Getting Started With The Blue Angel) .
Is that the way to go?
"I get the password error on the xda3nbftool for the nbf segment"
I would like to get rid of all the phonesound failure and systemhangs with TomTom5.10
My Qtek9090
PH20B 0 B
WWE E
DANGA001
1.40.00 0 0
1.40.556
1.13.00 13.00
Upgraded to this from the last O2 update (my BA is an O2 Xda IIs), and while for the most part it works fine, now if the device turns the screen off for power-save while out and about, the GPRS connection drops. I know the hardware is capable of keeping the GPRS connection alive in such a situation because, well, it didn't drop it under the previous two O2 ROMs I ran.
Anyone else had this problem, or know a fix? Hopefully it's something simple that I've overlooked...
I'm getting better Bluetooth support with this (whether through actual improvements in the stack or through sheer dumb luck), so I'd prefer not to downgrade if I can avoid it.
Upgrade for NON OEM/Carrier Blue Angel
I have an unlocked OEM i-mate PDA2K. Because of this I am unable to install the T-Mobile upgrade to 1.42.
Is there a way to get around this?
I tried using the MaUpgradeUt_noID.exe, but I was unsuccessful.
Any ideas on how to upgrade a non-T-mobile branded blue angel?
Thanks
problems upgrading a non-t-mobile branded PD2K
BELOW IS THE SCREENSHOT OF THE ERROR
Did you make sure you had the MAUpdate file in the same directory as the actual upgrade had been uncompressed into? Since it's missing the RUU.DLL file that is part of that package.
Basically, get the files out of the real upgrade, then copy the MAUpdate into that directory, then run it instead.
I can not unzip or unpackaged the shipped OS
When I double click on the file, it runs the file, when you right-click and select extract, it gives you an error.
How do you unpackage the ship package?
Me, I used WinZip, I think it was.
Can not unrar or unzip setup files from exe package
the instructions states:
Unrar or unzip all files in exe or rar into a new folder. I get an error when I do that.
I also noticed that the instructions states:
First Method (Quick/Easy) (TYPE II), but there is another method Second Method (Slower/Harder) (TYPE I)
I am going to give that a try
O2 XDA IIs
Hi from Greece,
A friend bring me to Greece from Singapore one O2 XDA IIs but it has a old versions:
rom 1.31.00 wwe
rom date: 12/13/04
radio v:1.02.00
protocol version: 1337.32
ExtROM version: 1.31.920 wwe
sorry but I'm newbie here, can you tell me what (and where can i find) I must download in order to update to the latest versions.
I allready download the latest version from O2.UK for O2-XDA IIS but I do not want to lock my device to any network and that's the reason who asked you and I do not install this I allready download.
I allready see http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades but I don t now what I must download.
thk u
i need the TMobile_PL_MDAIII_WWE_12200_183_10602_SHIP rom...help?
almost impossible to find it, it is very old rom
Nothing is impossible
TMobile_PL_MDAIII_WWE_12200_183_10602_SHIP - I think this is the one:
http://www.zshare.net/download/220675884b91fb/
and PLEASE - give more meaningful names for the threads.
jakubd said:
/*snip/*
give more meaningful names for the threads.
Click to expand...
Click to collapse
hehe sry for that i was histerical at the moment
btw jes i know it's an old rom, but im 100% shure it's a tmob003...
but not shure if its a pl or nl,so in about 2 min i'm gona find out
sry for my bad english...and many tnx from croatia
edit:
it look's like (didnt run th device info) PH20B 0 B ENG G T-MOB003 1.06.00 0 0 1.06.118 1.00.00 00.00(i' have the 1.06.00 rom...and i'm preaty sure that the radio was a 1.00.00)
it simply lost its rom(wtf??) and it has a id lock on it( so no tmobile uk roms and simular stuf...
well i'm gona try youre rom now...hope i finaly found what i'm looking for
rom update error...it starts to flash but spits out a error?how can i fix that?
You have to be more precise. Rom you asked it made for Polish edition of MDA3 (for Era GSM network; ROM is in english). It won't flash without "a bit of fight" on any other device (because of CID check - for this ROM I think it should be T-MOB009). I don't know which country had T-MOB003, but it wasn't Poland/Era GSM.
Please tell us, what would like to get, we will try to help you.
If you just want to know how to get rid of CID-check problem, read wiki. There is information how to modify ROM file to your hardware CID and also you can find upgrade tool that skips CID check.
t-mob003 is nl..99% sure...
PH20B 0 B ENG G T-MOB003 1.06.00 0 0 1.06.118 1.00.00 00.00
this shuld be mine?!?i tried to remove the cid...nothin hapend
its t-mobile.nl btw but youre ms_ work'ed thou
only missing a radio
Can;t you just use official shipped upgrade for Tmobile NL? it's really new (as for WM2003).
From Wiki: T-Mobile NL; WWE; T-MOB003; 1.42.00; 1.42.119; 1.13.00;
You have even the best (for me) radio 1.13 (newest is 1.15, but I had some doubts about this one).
Link here: http://www.zshare.net/download/22756005f8e7c9/
Consider also upgrading to WM5.
radio error...help? im on the end of my lat
What where and how can you see "radio error"?
Can you see version number next to R letter while booting? if not, use wiki and install one of available radio's update.
1.06.00 eng....
What where and how can you see "radio error"?
Click to expand...
Click to collapse
after 7% of flashing...stops, and some error 120: radio flash problem...
all radios i'we tied didnt work...i found some i think 13 or 9 mb radios(lol) and not 4mb...they did work but cant find them again?!
T-Mobile NL WWE T-MOB003 1.42.00 1.42.115 1.13.00
anyone??
error 114: radio rom update error?!
help pliz
why does BaUpgradeUt recognize my roms but the no id dosent??
ROM version: 1.06.00 ENG
ROM date: 08/05/04
Radio version: 1.00.00
Protocol version: 1337.30
ExtROM version 1.06.117 WWE (anyone know what the WWE means?)
Bluetooth: BT-PPC/PE Version 1.0.0 Build 1900
this is/was my original rom!
Step after step:
1. Error 120 (according to google) means country error - CID lock seems to work, and yout device just seems NOT to be T-Mobile NL; WWE; T-MOB003
2. For error 114 just use wiki and try to go through procedure desctibed there http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade and report results.
3. To load ROM to your device that isn't made for it, just use MaUpgradeUt_noID.ZIP (http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade)
4. "why does BaUpgradeUt recognize my roms but the no id dosent??" - this I really don't uderstand. Both version can read the same rom files if this is what you ask. They just ned to be in the same folder as the exectuable.
1. look i'm not a noob...
2. i cant run the device info on my pda...wont start?!
3. i get the radio error after 7% of flashing
4."why does BaUpgradeUt recognize my roms but the no id dosent??" i can read or? sinply the no id dosent recognize my roms...
5. i even tryed to modify the roms via dos...
help???
1. We'll see ;P
2. You mean GetDeviceData.exe? Have you read http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted Or you mean that device is dead and that's why you cannot start anything? Please, be precise.
3. This we know, but it doesn't bring any new info. We need error codes, anything.
4. "does not recognize rom" - but you mean nk.nbf files, or the device itself?
5. You mean you tried to modify device data in nk.nbf in command line (this is not DOS, btw) using the data you don't have (as I understand from 2)
SO: Please be precise and explain again now, what is the problem, step after step.
1. hehe you got a point there
2. yes i have red everithing! i can start cab-s...can run the unlock progi...but the device info not(and some other progs)...i can upload any ms-s!!!thats interesting!
3. i only get the 114 error 4 the rom...after 7%...so it starts...(on the pda is only the bootloader text) and no % are counted...my ges is that it only tests the rom...?! for the nk...after a while at 0% ist spits an error: canot upload ce flash rom...and so on...an the standard "do it again" message...(big help)
4. when i uload wit the no id another ms...i can see my ce flash vers...an the ms i want to upload...after that i have the ce flash and the ms...so that works fine?!
5. yes but i didnt say its dos...i sayd in the dos and not cmp im studiing computer sience thatfor i'm not a nob...and the answer is yes i tryed to modify the device info, language and operator...but had no sucses...atlest i dont know if i hited the ride info...canot upload over the maupdate...and the no id doesent recognise the roms(hehe now thats funny isn it?) =)
edit: a big sry on my english...its realy not my 1. language...my 2nd 2 its my 3rd...and i was typing damn quick...so sry 4 the problems...and a big tnx 4 the interest in solving my problem(didnt thank you 4 that)
poland mda iii rom anyone?
Still trying to understand what you wrote in the #18th post [approaching to end of point 2 ]
In the meanwhile link to polish rom you have... in post #3.
Hi folks,
i tried the upgrade like in "HTC_Blueangel_WM6_Wizzard" is discriped,
but after a hardreset i can't start my device or get in debugger screen!
I only see the boot screen with "R 1.10.00" displayed.
Any help would be welcome!
My device
Modell: PH20B1
CPU: Intel PXA263 400 MHz
RAM: 128 MB
Flash: 32 MB
ROM: 1.31.01 GER 12/13/04
Radio: 1.10.00
Protocoll: 133.7.391
ExtROM: 1.12.169 WWE
iso
i also experience this problem. can any one help us?
iso0815 said:
Hi folks,
i tried the upgrade like in "HTC_Blueangel_WM6_Wizzard" is discriped,
but after a hardreset i can't start my device or get in debugger screen!
I only see the boot screen with "R 1.10.00" displayed.
Any help would be welcome!
My device
Modell: PH20B1
CPU: Intel PXA263 400 MHz
RAM: 128 MB
Flash: 32 MB
ROM: 1.31.01 GER 12/13/04
Radio: 1.10.00
Protocoll: 133.7.391
ExtROM: 1.12.169 WWE
iso
Click to expand...
Click to collapse
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.]
I hope this will help to resolve the problem
Take Care
ENJOY
Old Bootloder?
Software Solutions said:
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
Click to expand...
Click to collapse
THX for your hint, but this is what doesn't would work!
When i press the two buttons, like you descriped and it is shown in wiki, no meue is shown?!
Maybe Bootloader of my BA is not the newest? = R 1.10.00
Could you tell me how i can update it?
iso
iso0815 said:
THX for your hint, but this is what doesn't would work!
When i press the two buttons, like you descriped and it is shown in wiki, no meue is shown?!
Maybe Bootloader of my BA is not the newest? = R 1.10.00
Could you tell me how i can update it?
iso
Click to expand...
Click to collapse
The bootloader is included in the ROM that you flash onto the device so that is not the issue. You must press the two buttons and hold them until the menu appears. It may take several attempts to succeed. The R that you are referring to represents Radio and has absolutely nothing to do with anything other than GSM operations.
Kasush said:
The bootloader is included in the ROM that you flash onto the device so that is not the issue. You must press the two buttons and hold them until the menu appears. It may take several attempts to succeed. The R that you are referring to represents Radio and has absolutely nothing to do with anything other than GSM operations.
Click to expand...
Click to collapse
okay... thanks for you info, but...
if R 1.10.00 is not the version of Bootloader i got no other on screen.
I pressed the record and media button while reset and after.
I pressed the buttons similar and step by step.
I pressed the buttons after battery reconneced.
I wait after reset without pressing buttons... nothing more happens then a screen with stipes an "R 1.10.00" is displayed in right bottom.
Buttons were working fine while i used WM2003 SE on the device, so i think bottons are not the problem... but where is the bug?
I am getting crazy... ???!
Maybe i should use a other rom?
Or try to use mtty? (see above)
iso
Added:
I used mtty like discriped in http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP but after Reset no difference... :-(
So, in the three stripes screen you only see R 1.01.00 and no G xxxx.xx nor D x.xx.xx.xxx ?
Maybe that means that you have no OS installed. Have you tried reflashing the ROM ?
Also, which ROM and program are you using to flash ?
JP
i dont know about R G and D terminologies...
but we think "R 1.10.00" stands for your RADIO Version... not the ROM.
and since you're not showing the "G xxx.xx" and "D x.xx.xx.xxx"...
i second JP... it's a bad ROM Flashing...
try to flash back the old rom and retry the upgrade.
Used tools..
THX for helping me...
I only used the tools of "HELMI_BA_WM6_R0_Public" archiv FLASH.
GetDeviceData.exe
MaUpgradeUt_noID.exe
RUU.conf
RUU.dll
EnterBL.exe
nk.nbf -> wm6-rom
and i have installed MS-Activesync 4.5.
I flashed the original o2-rom back and it works. WM2003 SE booting.
Than i flashed the HELMI_BA_WM6 and it was completed with 100%, no errors, but then after hardreset the same screen with stripes an R 1.10.00
Any more ideas?
iso
Same for me.
Any solutions?
Maybe this is helpful for you
bj_b4
Guys i think i have a similar problem.
I flashed my BA many times and it worked, back and forth WM5 to WM6 and so forth, until on Fri. I had accidentaly moved files and then deleted them from the windows dir. When I flashed the then WM6 to downgrade to WM5, it worked. When I used DOC resize tool to format my storage (didn't know about th mentined method) as usual (this worked many times before) & flashed to to WM6 then it got stuck at the 4 colors.
I tried what is wrote here and I am stuck at the white screen. nothing happening. It's been like that for an hour now. If i soft reset it, and try again it's the same nothing has changed.
any ideas?
Hi folks.
I've got some troubles with my Kaiser.
I bought it in belgium, it means, english langage. WWE Edition
I founded a french ROM on Orange Website, and in French( like me ! )
But during the flash, it failed at 16%. I waited several hours but no movement.
I tried everything, restore, hard spl again, original wwe rom, nothing works.
Bootloader stays at 0% and nothing happens.
What can I do. Please . I'm desperate.
when I power up, pda shows me : KAIS130
SPL-3.28.0000
CPLD-8
bb_ed68 said:
Hi folks.
I've got some troubles with my Kaiser.
I bought it in belgium, it means, english langage. WWE Edition
I founded a french ROM on Orange Website, and in French( like me ! )
But during the flash, it failed at 16%. I waited several hours but no movement.
I tried everything, restore, hard spl again, original wwe rom, nothing works.
Bootloader stays at 0% and nothing happens.
What can I do. Please . I'm desperate.
when I power up, pda shows me : KAIS130
SPL-3.28.0000
CPLD-8
Click to expand...
Click to collapse
Get the original Carrier ROM (The English WWE on that was on it before) from the wiki and Flash it.
Then read this guide before you flash anything else.
Oh, And no need to swear
Edit:
Because I'm feeling kind, The Wiki page is here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
You probably want one of the two HTC WWE Roms that start with the version 3.28.
Ta
Dave
Thanx for this fast answer!
I'm going to try this, as I got possibility to download this rom.
Not swearing... just exteriorize my anger because i'm beginner and I managed this manipulation with my brother's phone, but not with mine...
I did it !!!
Finally recovered my phone.
Thx again Daveshaw...