Database Develop

SOLVED: Lost HTC Homescreen plugin

Hi folks
Last night my HTC TyTN II ran out of power. When I had recharged it and started the device up again, I had lost the HTC Homescreen plugin. I've been unsuccessfull in getting it back, even after rebooting the device. The plugin is no longer listed under the Today settings screen either
Has anyone else experienced this and most importantly how can I get this back?
Thanks for your interest

khals said:
Hi folks
Last night my HTC TyTN II ran out of power. When I had recharged it and started the device up again, I had lost the HTC Homescreen plugin. I've been unsuccessfull in getting it back, even after rebooting the device. The plugin is no longer listed under the Today settings screen either
Has anyone else experienced this and most importantly how can I get this back?
Thanks for your interest
Click to expand...
Click to collapse
you may try the usual paths: hard-reset, and if not, install the cab again. it is floating around, you should find it.
did you try any of these?

I would only do a hard reset as a last result, and if then, maybe even just go for a different ROM.
Do you know where to find this .cab file? I found something in these forums but it seems to be related to the Hermes phones
Thanks again

Wohoo!! I finally got it back
In case someone else gets the same problem, I used "!!!FIXED HTC Kaiser 6 button Home Plugin by schen" found at:
http://forum.xda-developers.com/showthread.php?t=316107

Eternal Pie Wheel....

I have upgraded my Tytn II with the WM6.1 rom from the HTC site.
Since then I've noticed a couple of hours after a soft reset the pie wheel indicating busy pops up every 5-10 sec. As far as I can tell there is nothing I have installed that should require it to be thinking.
The phone then behaves very sluggishly till I soft reset again.
I thought it was maybe activesync.
I downloaded "MemMaid" so I could see what might be going on and terminate activesync.
Still no joy.
Anyone else able to suggest anything for me to try?

Is your phone a tilt?

Do you have Spb Pocket Plus Installed?
Just wondering if you have Spb pocket plus installed? If so, the problem may very well be just that – Spb Pocket Plus. Change your settings. I think you navigate there by going to Start - Settings - System - Spb Pocket Plus. Under that, you will find the relevant setting(s) to change. Once there, disable the "Refresh icons in today plug-in-when storage card is inserted", under the advanced options. I think this may be causing your headaches. – SOFT RESET AFTER MAKING CHANGES and hopefully, the hourglass will be gone. I used this program once a few months back and the same thing happened to me. My fix was uninstalling the app, but that may not be an option for you.
~Gwen
P.S. Report back here and let me know if this works or not.
P.S.S. Also, try uninstalling those programs you mentioned before you had the issue, ONE BY ONE, followed by soft resets after each one and see if any of those may be the culprit.

Touchscreen unresponsiveness - BRICK?

Okay, so to those of us who have problems with screen ignoring/being very slow with screen taps and/or buttons, read on.
I flashed ROMeOS ROM and started having problems where I would tap on something, and it would ignore it. I would keep tapping and tapping, but nothing happened. Sometimes, even hardware buttons were ignored, about 40% of the clicks. I never had that problem with Dutty's Diamond ROM or WM6 ROMs. Issue seems to be related to latest 6.1 builds... or so it seemed at the time.
After pulling out half of my hair, reflashing all kinds of ROMs, reflashing to latest HardSPL, etc etc... I almost threw my kaiser at the wall.
First I thought it's TouchFLO, then I thought that it's the latest 6.1 ROMs.. then I thought it's related to 3.56 HardSPL.. well eliminating those factors one by one DID NOT fix the problem. Right now I went 100% to stock ROM (one it came with) and AT&T's original SPL. I started having sound problems (w/e radio I tried did not work) so I flashed Hyperdragon Wm6.1 ROM.
About 90% of the problem is phone ignoring ANY kind of touchscreen taps/drags.
About 10% of the time its the hardware buttons that have the problem - for example I push "call" (or any other softkey) button, and nothing happens, while touchscreen could be working fine at that time. In about 10 seconds, hardware buttons would start working again.
Some information that was gathered from this thread and personal research:
It looks like problem is NOT related to the following:
- POWER. Connecting phone to AC power does not solve the problem. Subjectively, it may improve it a little.
- BLUETOOTH/WIFI. Problem persists with EVERYTHING disabled and phone being in Airplane mode.
- PARTICULAR 6.1 ROM. I had this problem on ANY 6.1 ROM I tested (and I tested all the way from AT&T almost-official WM6.1).. maybe that's why they didn't release it?
- OPERA browser. Some people never had Opera and they still have this problem (please confirm this!).
- SPB/WISBAR interface software. Although having Wisbar stuff does make it a lot worse for me.. and I still have the problem without SPB or WISBAR installed.
- S2U2 screen lock. Still had the problem w/o S2U2 installed.
- iGo 2006 or iGo 8. Many users with this problem never used iGo.
Problem MAY be related to the following (needs more research, please help):
- Original SPL versus HARDSPL 3.XX
- WM6.0 versus WM6.1 (I don't think I had any problems running original AT&T 6.0 ROM, but I did have sound (radio) problems, so had to flash 6.1). Several users report that WM6.0 is immune to this problem.
- A combination of running WM6.1 with latest HardSPL?
- Custom ROM VS Original ROM. Perhaps problem is in the tweaks to the registry.
- Simple things like overtime connection weakening in touchscreen connection to the mainboard. Whoever can open a Kaiser could try to replug/clean it and report back to us.
- Radio version. Should be easy to test, just need to reflash all kinds of older radios and see if problem persists.
Please make sure that you test your phone with some touchscreen intensive games/software a lot for AT LEAST 3-4 days. I had it happen several times where it would be fine after reflash for about a day or so, and then it would come back in full force.
BRICK?
In my case, running HTC WM6.0 ROM with HTC SPL DID NOT fix the problem, I can even say it made it worse. Touchscreen would respond to about 10% of the screen taps. Tap pressure doesn't make any difference.
Also, running AT&T stock shipped ROM with stock shipped radio and SPL did not fix it. I guess at this point, nothing will. Waiting for replacement tilt.
Hope nobody else will get it as bad as I did. All I can say is... make those relfashes count.

Hmm isn't Touch Flo one of the cool things with the Kaiser??? How do you navigate in programs now it's disabeled?

DarkDvr said:
Okay, so to those of us who have problems with screen ignoring/being very slow with screen taps - I think I've found a fix. Here's a little background:
I flashed ROMeOS ROM and started having problems where I would tap on something, and it would ignore it. I would keep tapping and tapping, but nothing happened. Sometimes, even hardware buttons were ignored, about 40% of the clicks. I never had that problem with Dutty's Diamond ROM or WM6 ROMs. Issue seems to be related only to latest 6.1 builds.
After pulling out half of my hair, reflashing all kinds of ROMs, reflashing to latest HardSPL, etc etc... I almost threw my kaiser at the wall.
So if you have similar problems - try using Shnaps' Advanced Config to disable the TouchFLO altogether.
Another thing that I've used is PocketMechanic to clean up the notification queue. After fresh install of HypreDragon (latest as of Aug 5), I had 46 duplicate notifications. Removing those seemed to ease the problem, but NOT fix it. Disabling TouchFLO seemed to finally fix it.
I hope this helps somebody. I'll update this thread if I keep having this problem..
Click to expand...
Click to collapse
Thanks for the head's up! I'll definately try that tomorrow (danish time).

Foxhunter123 said:
Hmm isn't Touch Flo one of the cool things with the Kaiser??? How do you navigate in programs now it's disabeled?
Click to expand...
Click to collapse
Never really caled for it, I use my hardware buttons (D-pad) to scroll, I find TouchFLO to be too unreliable... maybe it's just me, but nothing beats a hardware button which you actually "PUSH".

spip72 said:
Thanks for the head's up! I'll definately try that tomorrow (danish time).
Click to expand...
Click to collapse
Do you have the same problem?

Hello,
First off thak you for the post. Ive got two identical Tilts both with the exact same radio/boot/roms. One has this issue and the other doesnt. I will be disabling it on the one havong the issue and report back! Thanks much!!!

I was also having this problem. my biggest complaint was my keyboard was all over the place. Sometimes it wouldnt see key strokes at all, other times one key hit would register as 3 or 4.
Sent a few test messages and This seems to have helped.
THANK YOU!!!
My Kaiser was getting close to being flashed back to a WM6 rom or quite possibly embedded in a wall.

where do you find cab for touchflo? I was looking for that but could not find it.

tamkhanh said:
where do you find cab for touchflo? I was looking for that but could not find it.
Click to expand...
Click to collapse
seek and you shall find.
It's all over the place.

Try playing around with the TouchFLO sensitivity options in KaiserTweak
i upgraded to official 6.1 about two weeks ago...
i recently started having the "missed taps" problem...
i have a feeling that KaiserTweak has something to do with the issue...if memory serves, i don't remember experiencing the issue BEFORE i played with the "TouchFLO->Sensitivity" and "TouchFLO->Finger Pressure" options...i just launched KaiserTweak right now and its showing those values as set to defaults where as i could've sworn i changed them to the advised settings a day or two ago approximately when i started experiencing the issue...just a point to clarify, i was only playing around for no particular reason and my taps were not problematic before
i've just changed them to the advised settings and did a soft reset to see if these are the kind of settings that are forgotten after a soft reset...but they stuck...so i'm gonna observe this for a couple of days with the advised settings effective and see if they have reverted to defaults on first sight of the issue...i'll report back here if that happens because that would be a pretty strong correlation...almost enough to prove cause and effect

Well, problem is, last time I've used KaiserTweak was like a year ago, so my touchscreen problems cannot be linked to KaiserTweak. I don't even have it on my tilt.
Also, it's definitelly not a touchscreen itself, since this problem is application-dependent. Once again, S2U2 and Opera are immune to this problem. Windows' build-in apps (file explorer, bottom bar, etc) all suffer from it.

I've noticed this too, but I've found a slightly longer tap seems to make things reliable for me.. Instead of a quick 'jab' if I sort of touch it, it seems to be better.
and keyboard too I've noticed.. I mostly notice it with the hard keys rather than the keyboard, but I don't use the keyboard a lot.
I'll try looking for duplicate notifications, what else will do that besides MemMaid? I might reinstall it, it was handy. I previously found phoneAlarm would grow notifications over time, I suppose I need to watch for that anyway.

khaytsus said:
I've noticed this too, but I've found a slightly longer tap seems to make things reliable for me.. Instead of a quick 'jab' if I sort of touch it, it seems to be better.
Click to expand...
Click to collapse
True, if I keep pushing on the screen button, in about 5 seconds it will be clicked. But that's ridiculous, i gotta say.
I'll try looking for duplicate notifications, what else will do that besides MemMaid?
Click to expand...
Click to collapse
I use PocketMechanic - good stuff. Has lots of useful functions, including notification queue cleanup and analysis.

Just had another "seizure" - touchscreen would not respond AT ALL for several minutes. No matter what or how I tap - complete ignore.
After couple of minutes it started working again.
Interesting that S2U2 worked fine. Seems that windows just chooses to ignore touchscreen input.

I'm forced to return to WM6.0 ROM...
Please, anybody look into this.. phone is becoming to be unusable - I can't even enter a phone number.

DarkDvr said:
Do you have the same problem?
Click to expand...
Click to collapse
Yeah it's really bad here. I've tried all sorts of tricks, including:
Re-install 6.1
Re-install 6.1 with the recent radio update found on the e-club
Install SPL 3.56
Disable HTC today screen
Kaisertweaks - tweaks on and off
Disable radio completely (seems to help, but makes the device useless)
Disable activesync
Disable quickgps
For now, I've done 2 things that seems to help:
- Disable the HTC task manager - improves the responsiveness
- Kill the MSTLI.EXE process - improves on the number of freezes
But I still experience freezes, and it's really getting to me. I need a responsive device, not this c****

ASCIIker said:
i upgraded to official 6.1 about two weeks ago...
i recently started having the "missed taps" problem...
i have a feeling that KaiserTweak has something to do with the issue...if memory serves, i don't remember experiencing the issue BEFORE i played with the "TouchFLO->Sensitivity" and "TouchFLO->Finger Pressure" options...i just launched KaiserTweak right now and its showing those values as set to defaults where as i could've sworn i changed them to the advised settings a day or two ago approximately when i started experiencing the issue...just a point to clarify, i was only playing around for no particular reason and my taps were not problematic before
i've just changed them to the advised settings and did a soft reset to see if these are the kind of settings that are forgotten after a soft reset...but they stuck...so i'm gonna observe this for a couple of days with the advised settings effective and see if they have reverted to defaults on first sight of the issue...i'll report back here if that happens because that would be a pretty strong correlation...almost enough to prove cause and effect
Click to expand...
Click to collapse
My device is currently without kaisertweaks, and I still have the freezing issues.

DarkDvr said:
Well, problem is, last time I've used KaiserTweak was like a year ago, so my touchscreen problems cannot be linked to KaiserTweak. I don't even have it on my tilt.
Also, it's definitelly not a touchscreen itself, since this problem is application-dependent. Once again, S2U2 and Opera are immune to this problem. Windows' build-in apps (file explorer, bottom bar, etc) all suffer from it.
Click to expand...
Click to collapse
I concur, it is application specific. I tried to run the "Task manager" from Fdcsoft to see if it was related to a process eating up all the CPU. But the problem doesn't occur while the application is focused.

DarkDvr said:
Never really caled for it, I use my hardware buttons (D-pad) to scroll, I find TouchFLO to be too unreliable... maybe it's just me, but nothing beats a hardware button which you actually "PUSH".
Click to expand...
Click to collapse
TouchFlo is way too unreliable to me too.

DarkDvr said:
True, if I keep pushing on the screen button, in about 5 seconds it will be clicked. But that's ridiculous, i gotta say.
I use PocketMechanic - good stuff. Has lots of useful functions, including notification queue cleanup and analysis.
Click to expand...
Click to collapse
Oh wow, not a LONG PRESS, literally a 'touch' vs a 'tap'. What you describe would be seriously annoying.
Thanks for the suggestion, I'll look at it

TouchFLO 3D

I have a telus CDMA Touch Diamond.
I have has for 3 weeks and the TouchFLO 3D interface multiple times does not load.
I have gone into the Today screen and unchecked the TouchFLO 3D, soft reset and then re-check and reset again. It still will not open.
I have even removed battery to see if that will resolve it
What would cause this issue?
As usual, the 3rd party support at HTC advises to hard reset, is this the only advise they can provide, oh, and they are suprised that this has never happened, I called 2 week ago with same issue.
I really do not want to hard reset every 2 weeks, this is not a resolution.
Any suggestion, I am really pi$#ed right now.
Please any suggestions to solve this issue, throwing out the windows seems to be an option right now!!!

on my diamond, when having a custom theme installed, deleting all *_manila files from the windows dir seems to be the best way to go back to the original theme (which still is in the rom). I had a similar problem yesterday, when i failed at manually editing one of the manila-files to add another tab-page (for a calendar).

Xperia Boot problems?

Hi guys, I have had my Xperia a few days now, it's a Vodafone that I hae flashed the Generic UK software to (without HardSPL) it seems to work ok but I am having a few problems. First of all, whether or not the phone will boot is hit and miss, it will get to the today screen and lock up as soon as the clock on the today screen loads. Hitting the reset switch under the cover will reboot it and it will generally boot fine, usually on every second boot.
Another problem I have is that Shell32.exe crashes a lot as does explorer.exe Shell32.exe seems to crash when installing and uninstalling applications, it does not always happen but it's happened a few times so far and is becoming irritating.
I am going to reinstall the firmware image and leave it a day or two without installing any apps to see if the problem is resolved. If anyone has any posible ideas I would appreciate it. Thanks.
Edit: I have renamed thread to remove the reference to boot problem with memory card inserted because after having removed the memory card the problem still persists so I gues it's unrelated.

Shell32.exe error
I also am having issue with shell32.exe crashing, the problem is repeatable everytime I go into the today screen options, as soon as I exit, regardles of which panel I went in from, shell32,exe crashes and I have to reboot the phone. Sometimes the only way to do so is to remove the battery. Any changes that I have made in the today screen do show up after the reboot. This is really annoying me now as shell32.exe is an important system process. Any thoughts, or shall I just hard reset.

R2AA
I'd make sure you're updated to the GENERIC UK R2AA ROM, if you're already on it, get a new copy of it from here, reformat your mem card and flash the phone again.
I seem to be OK now and not getting the shell32.exe crash anymore. Still having various other problems with it stopping responding (barely anything installed, and nothing really running) but not much more I can do, just learning to deal with it because i can't do with the stress of worrying about it. It's Windows, so expect it to suck.

i was on my R1A, had this problem, Hard reset it and the problem still exist...
Upgraded to the official R2AA10 and guess what? the problem is still there....
What is it that actually causing this problem? im planning on selling my X1 because this problem is so irritating....

Strange
mr_sheen said:
i was on my R1A, had this problem, Hard reset it and the problem still exist...
Upgraded to the official R2AA10 and guess what? the problem is still there....
What is it that actually causing this problem? im planning on selling my X1 because this problem is so irritating....
Click to expand...
Click to collapse
Strangely, I stoppped having this problem a long time ago. I ran on R2A and R3A for a long time without any trouble now, I think it was due to a common program we were having installed because I use different programs than I used to and I havn't seen it happen since I last posted about having the problem.
Stick with a fresh install and see how it goes, install your apps slowly until it doesn't happen anymore.
I can't remember the exact programs I used to use but I have a feeling it was related to homescreen plugins or some such.
Let me know what programs you use maybe we can find a common denominator.

alias_neo said:
Strangely, I stoppped having this problem a long time ago. I ran on R2A and R3A for a long time without any trouble now, I think it was due to a common program we were having installed because I use different programs than I used to and I havn't seen it happen since I last posted about having the problem.
Stick with a fresh install and see how it goes, install your apps slowly until it doesn't happen anymore.
I can't remember the exact programs I used to use but I have a feeling it was related to homescreen plugins or some such.
Let me know what programs you use maybe we can find a common denominator.
Click to expand...
Click to collapse
Okay, so after hard reset, i always install my program again one by one...
Strangely, the error always happen the FIRST time i install any program that uses today plugin...at first i thought it was SPB Wireless, then after another hard reset i installed Beejive, and the same error occurs...
Now mine is a little bit stable, mainly because i dont touch the today setting anymore....i (forcefully, despite the error ) installed Pocket digital clock, SPB Pocket Plus, and SPB wireless....
Its been fine for the last 2 days...without touching any of the today settings...
What is it that actually causing the problem? so strange....

mr_sheen said:
Okay, so after hard reset, i always install my program again one by one...
Strangely, the error always happen the FIRST time i install any program that uses today plugin...at first i thought it was SPB Wireless, then after another hard reset i installed Beejive, and the same error occurs...
Now mine is a little bit stable, mainly because i dont touch the today setting anymore....i (forcefully, despite the error ) installed Pocket digital clock, SPB Pocket Plus, and SPB wireless....
Its been fine for the last 2 days...without touching any of the today settings...
What is it that actually causing the problem? so strange....
Click to expand...
Click to collapse
Well, I never used SPB wireless when i had that problem, but i did use Beejive, Vito Sound Explorer (has a today plugin) HomeScreen++ and Wisbar Advance Desktop (saw a few crashes with this). Saw the problems a lot back then.
When I only ran Homescreen++ I never saw the problem.
I am running 6.5 now so i can't test it for you I'm afraid to find the exact problem, but I'd certainly keep hold of your Xperia because it's definately just caused by a 3rd party app/plugin.

alias_neo said:
Well, I never used SPB wireless when i had that problem, but i did use Beejive, Vito Sound Explorer (has a today plugin) HomeScreen++ and Wisbar Advance Desktop (saw a few crashes with this). Saw the problems a lot back then.
When I only ran Homescreen++ I never saw the problem.
I am running 6.5 now so i can't test it for you I'm afraid to find the exact problem, but I'd certainly keep hold of your Xperia because it's definately just caused by a 3rd party app/plugin.
Click to expand...
Click to collapse
the weird thing is, i ran all my program above for about 4 months on my R1A and no problem occurred....everything was good.
Then i tried to install SPB phone suite, but the installation stopped at 3/4 because the software wasnt signed or something like that (strange, i got it from SPB site), and it just left me some today plugin but withoun any name...it was blank....my today plugin order was in a mess too...i soft reset, it was okay....but i soft reset it again later that day and thats when the problem happened...
I found it strange that it still happens after hard reset and even after Rom change...especially to ANY program that uses today plugin....weird...

Try using R2A_10 or later, I never had any problems from then on, I'm running gtrabs R3A/6.5 atm, although it hasa bunch oof problemsof its own.

alias_neo said:
Try using R2A_10 or later, I never had any problems from then on, I'm running gtrabs R3A/6.5 atm, although it hasa bunch oof problemsof its own.
Click to expand...
Click to collapse
im using the official R2A10 at the moment....the problem still exist the first time i put all my software back....
But it seems stable now for the last 2 days...if the problem occurs again, i'll post it up here,,,

Re: PARANOIDANDROID 3.00 | Only Rom on Android capable of Hybrid mode 02/11
Edit: XDA freak out

decalex said:
ya, that's not gonna happen, BUT, xposed framework mod works on TW based ROMs, and u could always go that route if u want per app DPI. I'm a big fan of PA's implementation though. Xposed works great but a little more tedious.
Click to expand...
Click to collapse
How did this got here?

Lmao, I have noo idea.