AT&T Blue Mmode settings - Tilt, TyTN II, MDA Vario III General

Hello all,
I just got my Tilt unlocked and seem to be running into a few issues. I setup the WAP settings according to this http://forums.wireless.att.com/cng/...thread.id=38077&view=by_date_ascending&page=1
I am get web access in apps like Windows Live, but internet explorer gives me an error that it can't find the page. I ran the disable proxy application built in the att rom and now i get to "connecting..." "locating..." then I get an error message that says "the page cannot be displayed or the downloaded because the connection was lost. check the connection and try again later."
Before I ran the disable proxy I would get a 0x80088000 error msg in pocket internet explorer...
Google maps does not seem to want to download data either...
Full signal and connection works fine on my blackjack... (3G)
Ideas?

I noticed in my old blackjack that inside IE theres an option to chose connection settings. My tilt does not have this?
Any work arounds? SHould I flash to the HTC firmware?

had the same problem...ignored all the settings info and just entered in proxy for the apn and everything worked fine...try it out. ridiculous that the best settings were no settings!!

Related

How to use internet access with T-zones instead of Total internet? (US T-mobile)

I have been searching thru the forum and i can't find any specific information about it
i use windows live messenger, email , and browse with Opera...I do use live search and google map too and i am with the 19.99 total internet plan now..
Just want to see if it is possible to save the 13 bucks coz i don't need hotspot at all....
I have seen posts that about changing proxy and get the internet with PIE to work but it doesn't mention about other programs like tomtom google map live search and i don't want to change it to the T-zones without confirming this.
Could anyone help please?
i'm in the same boat as you, the 5.99 works on my dash, so i'm expecting it to work on the tilt, but i just cant get it to work...now when i open up PIE, it goes from connnecting, to loading to opening, and just stays there and then gives me error #502... so if you figure it out, def let me know, thanks
omar
Same here, I have posted a thread about it already but no replies, Here. Do let me know it thr is any, n i'll do the same.
I can confirm t-zone plan works fine with google map, push mail to exchange servers, browsing using IE, and regular smtp/pop email. The weather update progam on the today screen does not work. On the other hand, SBSH Pocket Weather does work (I let it update throughout the day). NTP time server service also does not work (using CityTime).
1. add new modem connection -- cellular line (gprs, 3g);
2. access point name -- wap.voicestream.com
3. leave password blank
4. proxy settings check "this network connects to internet";
5. check "use proxy server"
6. proxy server: 216.155.165.50
7. advanced: change http port from 80 to 8080
Under network management, set Internet Connection to the account just created above. Leave private network as "My Work Network".
Soft-reset.
If you have trouble with POP accounts, edit each POP account and change connection away from "My ISP" to the t-mobile account.
Cheers
Okay i have tested this setting for T zones and i am trying to add a few details on it.
1st. Windows Live and Windows Live Messenger does not work =/ I guess it is because it doesn't support proxy connection. I am wondering if anyone can somehow mod it or change the proxy settings of these two programs with registry or other means so i can actually use it?
2nd. PIE works right away with the setting, but Opera won't. Later i add the proxy server in the Opera setting then it works like a miracle too=)
3rd. Some other IM site such as communicationtube.net does support the login of msn using T zones...Kind of a substitute even tho the stock messenger works much better.
4th. for 13 bucks/month the only different is probably only on Windows Live and Windows Live messenger....or if someone can actually provide a mod version of these two programs or a tweak that changes their settings. T zones works perfect for kaiser...
I can confirm that GMM works with the method listed in the link below with the $5.99 T-Mobile Web plan and WM5. But "My Location" does not, may be my phone (Cingular 3125) http://www.ehow.com/how_2245457_tmobile-shadow-any-windows-mobile.html

[Solved] Att Tilt won't Sync with e-mail

OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
xcom923 said:
OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
Click to expand...
Click to collapse
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
dwny said:
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
Click to expand...
Click to collapse
I'm sorry I thought I was providing enough info. I used the network config ROM that was built in to most of the windows 6.1 ROMs but I also used the "default" settings from att. (I ment defauld because that is what att shipps)
But if you want more info here is my network settings
When I first hit "connection settings" I have in bold "MY ISP" and "My Work Network"
if you go to manage "MY ISP" it has the config for att's isp. here are the settings:
Access Point Name: isp.cingular
UserName: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
Under the "Advance" tab I have 3 choices for each drop-down menu they are "My ISP" (which is selected for the top "programs automatically connect to the internet"), "MEdia Net", and "My Work Network" (which is selected for "programs that automatically connect to a private network)
the "MEdia Net" settings are as follows (and I have switched between using ISP and MEdia net in the drop down menu for internet and get the same problem)
Access Point Name:wap.cingular
User Name: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
I hope that is enough info like I said earlier my roms is currently DCS v1.7 and I'm running radio 1.64 as a side not it doesn't seem like my GPS is working correctly since it hasn't found a lock in 5min. But I think I've found the thread to help me with that. Again I'm having trouble with only syncing my e-mail althouth internet works just fine
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
ChumleyEX said:
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
Click to expand...
Click to collapse
that's actually the first time I heard something about proxy settings. Where is that cab just in case (I'm willing to try anything)
I didn't use that cab but I did try Cingular PDA MediaNet MMS Settingsv2.cab
it should be attached.
EDIT
I know what solved my problem, paying a past due bill.
Problem Solved
OK, one piece of info that I didn't realize was important was that I am on the unlimited MEdia Net plan (which uses WAP.CINGULAR.COM) and the PDA plan, which is way more expensive uses ISP.CINGULAR.COM apparently I needed to change any network that was WAP and change it to ISP to get my pda to use things that I guess are usually covered in the PDA Data plan.
Thanks for your help everyone and I hope this can be used for someone else as well. long story short.....
media net=wap.cingular
pda plan=isp.cingular

US Version w/AT&T Please Help

Info:
- HTC Diamond US Version 3G/Quadband
- AT&T Sim card w/ active data plan
Problem:
- Cannot connect to internet. Exchange server does not sync.
When I try to go to say google within Opera or IE it does not connect. Opera gives me this red screen saying unable to access network.
I am however able to use the phone and send/receive text messages.
Troubleshooting:
- Called HTC, no help
- Called AT&T, don't support the phone, no help
- Best Buy sells the phone so I went in there, no help.
- Went to an AT&T store, no help
- Search function within this forum didnt reveal anything.
- I did take my SIM and try it in another HTC Diamond and same thing. So I am ruling out the phone being the problem.
Note: this SIM card works like a charm in my Samsung Blackjack2 and my Jailbroken iPhone.
PLEASE somebody help me!!!
I am pretty tech savvy and have been searching the net for 2 days.
If you need more info, please ask. Could be a data connection settings that i need to manual input?
~ Phillip
Help us out. What are your internet settings? Did you run the setup wizard for AT&T?
I inserted the SIM, followed instructions, set it up to autmatically detect AT&T settings.
I sets up the connection as Media Net which i believe is right.
I actually just had my first advance. I was able to get internet by removing the proxy server from the Media Net connection.
So internet is solved. Just trying to figure out how to sync with my exchange. Which i have done with other phone a dozen times with no problems (so i know my user name, pass, domain and stuff are accurate)
What else do you need to know.
Every setting
I read this in another thread:
I tried the connection wizard and couldn't get online. I deleted the connection and manually setup a connection called Cingular GPRS:
Cellular Line (GPRS, 3G)
wap.cingular
User: [email protected]
PW: CINGULAR1
That's it. No domain or advanced server settings.
that enabled internet for me. not able to sync my exchange server still. small chance it could be something small i am doing wrong.
Where can I locate "edit account setup"???
taken from this -
For e-mail, you have to edit the "Advanced Server Settings" under "Edit Account Setup". There is a drop down box "Network Connection." I believe it defaults to "The Internet" which never works for me. You can either change it to Media Net or a custom connection if you make your own.
YouTube doesn't work with the Media Net connection because of the proxy. You can either disable the proxy in the Media Net connection or create a new connection that has the proxy disabled. I usually do option 2 and create a "No Proxy" connection that is identical to Media Net except no proxy. (I like to leave the Media Net w/Proxy just in case I need to access some AT&T thing.) I then set all apps to use the "No Proxy" connection (mail, MMS, etc)
Problem Solved.
Solution:
Once you insert the SIM and follow the setup. NOTE: the setup provided for Media Net is not correct. Follow my steps in post #5 by deleting the Media net and making your own.
Once this is done, then you will have access to the internet. Then you can setup your email exchange.
If you setup your email exchange first, it will not work. Follow steps in Post #5 then go back and erase your mail account. Start a new account and bingo.
Hope this helps some newbies like me.
~ Phillip

Use AIRTEL LIVE on DIAMOND in INDIA

Hey guys,
I used diamond then shifted to Omnia and now back on Diamond.
Diamond was never able to use airtel live and the customer care people used to say that the service is not available to any Windows Mobile Device and i need to buy Mobile Office to use net on my cell. Bull S***..!!
Then i went to Omnia and it was able to run Airtel Live. Damn.. Whats wrong with Diamond then.
For some reasons i shifted back to Diamond and searched day and night to find out the solution. Here it is:-
1. Activate Airtel Live by sending the following SMS to 121: MASALA ACTIVE.
2. The service takes atleast 3-4 hours to get active. Restart the phone and resume configuring.
3. Tap Start -> Settings.
4. Select Connections Tab and tap Connections.
5. Select Advanced Tab, tap Select Networks button to bring up Network Management.
6. Under "Programs that automatically connect to the Internet should connect using:" drop down, tap the New button.
7. In the General Tab, type the name of the settings as Airtel Live
8. Select Modem tab, tap New...
9. Type the name of connection as Airtel Live, select the modem as Cellular Line (GPRS) and tap Next.
10. Type Access Point Name as airtelfun.com and tap next.
11. Leave username, password and domain blank and tap finish.
12. Select Proxy Settings tab. Tap "This network connects to the Internet". This should enable the next check box option.
13. Tap "This network uses a proxy server to connect to the Internet".
14. Type the proxy server as: 100.1.200.99 and then tap Advanced...
15. Tap HTTP, leave the server as 100.1.200.99 and change the port to 8080
16. Similarly tap WAP, Secure WAP and Socks, type the server as 100.1.200.99 but leave the port to defaults. These are optional settings.
17. Tap OK to close the Advanced proxy setup screen.
18. Tap OK to close the New connection screen.
19. The network management screen should now list the new connection you have created in the drop-down. Tap OK to close this screen
20. Tap OK to close the connection screen.
And its done. Use IE or Opera and have fun.
Njoi..!!
do leave a "Thanks" if it works out.
I did all the steps and after them there's the Edge icon on the signal bar when some application try to connect to internet...but i still any application is not able to access the internet. When I open the site in IE i get "Request not authorized to access WAP gateway". Also its not that I don't have WAP access on my Airtel connection, the same SIM is able to access WAP sites through nokia's default browser in my older nokia 6600
NOP still works? i thought it was stopped sometime back. Will try it out.
umm..any idea whats the downloading/browsing charges?
btw..i'm in bombay
Mafioso said:
I did all the steps and after them there's the Edge icon on the signal bar when some application try to connect to internet...but i still any application is not able to access the internet. When I open the site in IE i get "Request not authorized to access WAP gateway". Also its not that I don't have WAP access on my Airtel connection, the same SIM is able to access WAP sites through nokia's default browser in my older nokia 6600
Click to expand...
Click to collapse
i used to use NOP to browse net on my laptop.
airtel tried to act smart, it blocked many browsers so that only few browsers can access the web. on my laptop, i changed the user agent and worked like a charm
hmm...for mobile...i used opera mini
fazalali110 said:
i used to use NOP to browse net on my laptop.
airtel tried to act smart, it blocked many browsers so that only few browsers can access the web. on my laptop, i changed the user agent and worked like a charm
hmm...for mobile...i used opera mini
Click to expand...
Click to collapse
I think NOP has subscription charges as 100/month...
cool. its working. another reason to luv my diamond
gmail problem now !
Blackberry connect, on htc pp300 running onWM 6.1, used to freeze the mobile frequently. After making these changes, there are no more hangs
Now gmail connection has stopped working. I get an error "error synchronizing". I tried both POP3 and IMAP connections. Any suggestions on how to fix the problem.

HTC Weather and Proxy Authentication

I've searched the forums and I can't seem to find a solution to the fact that I can't download weather data while synced at work behind a proxy server. I'm able to connect to the Internet from IE and Opera with the correct Proxy information set in my Connection settings tab.
From my home wi-fi or home activesync, I connect fine, because there's no proxy required. Because I don't have a data plan, and I can't get the weather to update through my proxy at work, I'm limited to updates while I'm home.
Has anyone found a solution to this proxy authentication problem? Thanks!
The problem can be related with "Proxy manager". Try to disable proxy, it's in "Tools" section of "Programs".
ghoch said:
The problem can be related with "Proxy manager". Try to disable proxy, it's in "Tools" section of "Programs".
Click to expand...
Click to collapse
Thanks for the advice. Unfortunately, EnergyROM doesn't have a "Proxy manager" folder under "Tools". I did, however, have the cabs for remove and restore hidden proxy. I tested after each install, but had no luck, although all my other Internet apps still connected fine.
The specific error I receive is:
Connection Error
There was a connection error while attempting to download weather data. Retry?
Click to expand...
Click to collapse
May be your proxy server is banned by weather data provider
It is more likely that the provider is blocked by my corporate proxy. Where do I determine the url used for the weather feed so I can test from my PC?
Edit:
OK. If found the url. It is http://weather.not2advanced.com/htcweather/forecastdata.php?ac=XDADevs&locCode=%25ls&version= 1&device=innovation and I'm able to access it just fine from my desktop to which I'm synced. That puts the problem back to the application, in my opinion.
I suspect it could be related to the information located in the [Sep-14-08] HTC Weather Proxy Patch thread that with this fix, but there have be no updates for for TF3D or sense editions. I'm wondering if no one else is having the problem?
So... nobody else has encountered this issue?
Try AccuWeather.com service.
http://www.htc-touch-info.com/en/weather/
Thank you for you response. But I'm confused. How does changing the location of the server change anything if the weather application can't get out to it in the first place? Here's what I mean. While synced with my PC, I can open the above url in pocket IE and see the resulting xml data. This would mean my phone can resolve and receive data from the url through my corporate firewall, yet the manila weather still receives the 'Connection Error' when using the same address. To me, this suggests that the weather application isn't using the proxy settings specified in 'Settings->Connections->Connections->Edit my proxy server'.
Maybe I'm wrong. if so, perhaps you could explain it to me so I can understand.
Thanks again!
Roger
same here!
Same here, im using the same rom as u and Im having the exact same problem and its driving me nuts cus i really like this rom...but i like the weather updates 2!
If u get a solution pm me plz!
Cheers
no solution till now?
i have the same problem with my HTC TD2, Opera or iexlore are going fine through the proxy settings as i'm connectet via USB at work.
but all other applications don't (wheather update, GPS Tracks, Geocaching,...)
on Android systems there is a solution called TransProxy but not for WM6.5
Udo
There is a program called ProxyCap that has a decent version for Windows Mobile - http://www.proxycap.com/download.html
It's only a 14-day trial though =( But seems to be quite powerful. You could possibly also use it as a rule-based firewall, by forcing a certain port range or exe to use a proxy server that doesn't actually exist
It works well for me, when testing a SOCKS connection to Tor, but it only supports SOCKS4/5 and HTTPS (not standard HTTP) so now I have to install Secure HTTP support on my SQUID server! I haven't touched that thing for months!

Categories

Resources