Hey everybody! This is my first post on the xda-developers forums and I thought I'd make it a useful one. I attached the first WinMo6 application I made for my Tilt. It's a program which locks your keypad with the standard PIN prompt and quits. It's use? Lock your phone and set it to standby with two keys and no stylus.
Reason I wrote it? The second day I got the Tilt I found that the concept of being unable to lock the phone without the stylus confused and infuriated me.
Here's how you use it:
1. Download the .Zip file to your computer.
2. Extract the contents and copy the contained .Exe to your phone
3. Use jgermuga's PTT remap instructions found here:
http://forum.xda-developers.com/showpost.php?p=1577293&postcount=12
4. For the \HKLM\Software\Microsoft\Shell\Keys\40C7 key set the (Default) value to "\Path\To\KeyLock.exe" (Obviously replace \Path\To\ with the appropriate path, mine was "\Temp\")
5. Also add a string called ResetCmd with the same value.
I used "MobileRegistryEditor" to edit the registry on my Tilt. Also included in the .Zip is the source code in case you want to compile from source, audit the code, or just don't trust me. Compile it yourself if you wish.
With the above steps you can have a simple method to lock and standby your phone: Hold down the PTT talk button for just about 1 second then quickly tap your power button. As soon as the application begins launching your phone is already being locked so you do not have to wait for it to display anything other than the spinning "please wait" wheel. Power it off right away.
This has made my life significantly easier, and I hope it helps yours!
Enjoy
-Anthony
Hmmm, doesn't seem to be working to well for me.
I orginally had setup up the 40C7 to open my "File Manager" (which worked fine)
SO I reset the value to "\Program Files\KeyLock.exe" where I had placed the file.
I ran the program.. it asked me if it was ok to run I told it yes... Scratched my head for a minute wondering what happened.. Went back to the post realized I missed step 5 "5. Also add a string called ResetCmd with the same value."
So I created a new string ResetCmd with the Value "\Program Files\KeyLock.exe" restarted the phone.. when I press the button now the loading thing comes up and the screen seems like it either flashes or flickers.. and nothing happens..
Than tried reseting the phone by pressing the little button at the bottom, after it booted up still no luck.
Let me know your thoughts... ( I used mobile registry editor as well )
What language is this programmed in, I'll just get the software from my work and see if I can play with it a bit...
OH and FYI running AT&T's Stock loaded Windows Mobile 6 Professional.
or you can download devicelock1.2, and map it to one of your hardware buttons. pretty much uses the built in device lock, but it makes it available so you can map it to a button, thus no need to use stylus to lock.
no need to unzip, just drag the file into your phone and install.
NguyenHuu said:
or you can download devicelock1.2, and map it to one of your hardware buttons.
Click to expand...
Click to collapse
Where would I get this?
^ i updated my post, its attached now.
Ty, I ended up searching the forums for it and found it. I'll give it shot and post back in a few.
Thanks Device Lock 1.2 Works Like a Champ. TYVM for your help sir.
Hmm whats the deal with the beeping noise right before it initates the locking?
(I take it back, I like the beeping noise..)
Whats the deal with if you have it on EASY unlock. and Black Screen
When you hold down PPT to have it lock... then after it the screen goes black you press ppt again... Your easy lock is than disabled?
(I should probably post this in the Device Lock 1.2 orignal thread http://forum.xda-developers.com/showthread.php?t=305402&highlight=device+lock)
I'm honestly unsure why it would not lock your device although I did set up a numeric PIN for my device which it prompts me to enter. Try running the .exe from the Program Files directory if you're still interested. If it doesn't lock your phone then I'm unsure why.
DuMnUt101 said:
Hmmm, doesn't seem to be working to well for me.
I orginally had setup up the 40C7 to open my "File Manager" (which worked fine)
SO I reset the value to "\Program Files\KeyLock.exe" where I had placed the file.
I ran the program.. it asked me if it was ok to run I told it yes... Scratched my head for a minute wondering what happened.. Went back to the post realized I missed step 5 "5. Also add a string called ResetCmd with the same value."
So I created a new string ResetCmd with the Value "\Program Files\KeyLock.exe" restarted the phone.. when I press the button now the loading thing comes up and the screen seems like it either flashes or flickers.. and nothing happens..
Than tried reseting the phone by pressing the little button at the bottom, after it booted up still no luck.
Let me know your thoughts... ( I used mobile registry editor as well )
What language is this programmed in, I'll just get the software from my work and see if I can play with it a bit...
OH and FYI running AT&T's Stock loaded Windows Mobile 6 Professional.
Click to expand...
Click to collapse
Yea I had tried that too. But the Device Lock 1.2 seemed to have solved my problem. Thanks though.
Hi:
Sorry if this is a dumb question. When you use DeviceLock, do you still have to press the power button to wake up screen before unlocking? I hate that power button, it is too hard for me to find sometimes lol.
Thanks!
cincy1020 said:
Hi:
Sorry if this is a dumb question. When you use DeviceLock, do you still have to press the power button to wake up screen before unlocking? I hate that power button, it is too hard for me to find sometimes lol.
Thanks!
Click to expand...
Click to collapse
when you use device lock, it will lock your phone and dim it, not turn off the screen. so you do not need to press the power button to wake it up before unlocking.
there are options in the settings that will let you turn off the screen when you lock, but i dont think that is what you want. leave that setting unchecked.
Related
I am trying to modify the registry (do not wnat the SIM contacts to show). Well strangely anought if I modify it I see the effect right away even without restarting. But once I restart (Power Down & Power up, or soft reset) the reg change reverts to the original setting. I know this was a problem on some smartphones you needed to modify some kind of registry setting to get it stick, but that also meant that your Device ID (for TOMTOM e.g.) would change as well... Anyone ??
Sure that you did power-down and -up?
What you describe sounds like a soft-reset; the changes won't stick.
Do your change, save it , power down by hold in the on/off button. That will stick.
1- Change the reg key
2- Close ALL open programs
3- Power down (normally; NOT holding button for long time)
4- Wait at least one minute!!!
5- Power up, and reset after at least 20 sec pause...
Changes should stick then...
I'm not sure why it is, but changing the registry not to show sim contacts sets itself back to its original setting after a reset. I've changed other registry settings and they all stuck. If you notice, in the contacts-->menu-->options you have the option to show contacts only which hides the sim contacts but as soon as you reset your phone they come back there too. Apparently HTC thinks it's important to always see your sim contacts and not have the option to hide them or something.
Moaske said:
1- Change the reg key
2- Close ALL open programs
3- Power down (normally; NOT holding button for long time)
4- Wait at least one minute!!!
5- Power up, and reset after at least 20 sec pause...
Changes should stick then...
Click to expand...
Click to collapse
Moaske!
Thanx but it still does not stick. Funny is though that when I do change the reg key the effect is immediate, on my old Vario II I needed to reset before the change was active, and on the TyTn II the change is effective right away, because after changing I looked in my contacts and al the SIM contacts are gone. But after a reset (following your instruction) the reg key is back to 1.
OK I just changed another reg key (the one that controls the dialer skin) and that one sticks... I think xeno1 is right HTC seem to think that We always want to see our SIM contacts!?
Anyone with a solution ??
I've got an idea, but not quite sure how to impliment it, but it should be pretty easy. If you've noticed, you don't have to do a soft reset after you do a registry settings change, the effects are immediate. Anyone know how to put a file in the startup folder that will just do the registry settings change on boot up?
xeno1 said:
I've got an idea, but not quite sure how to impliment it, but it should be pretty easy. If you've noticed, you don't have to do a soft reset after you do a registry settings change, the effects are immediate. Anyone know how to put a file in the startup folder that will just do the registry settings change on boot up?
Click to expand...
Click to collapse
Ehm...maybe this may be to easily thought up, but exporting a reg key from your reg editor, and placing that file in the startup folder, would that work?
Moaske said:
Ehm...maybe this may be to easily thought up, but exporting a reg key from your reg editor, and placing that file in the startup folder, would that work?
Click to expand...
Click to collapse
I tried that and as soon as my phone reboots the registry editor opens as if it's importing that key and then shuts back down again but when I open up the reg editor again it's back to 1. I've also tried just going to the reg file in file explorer and clicking on it and still it won't let it change that one key. This is starting to make me really wonder why that key is so important that they need to lock it like that.
Im glad im not the only one with this problem.. guess ill wait for a fix.
waiting for a fix as well...
I have a fix, thanks to NuShrike over at MoDaCo.
xeno1 said:
I have a fix, thanks to NuShrike over at MoDaCo.
Click to expand...
Click to collapse
tested, and working. Thanks
Excellent, worked like a charm...Thank you
This will drive me crazy. I have had the button above the volume mapped to Voice Command ever since I can remember. Now for the Tilt, it is mapped to Push to talk which I will never, ever use and the button mapping does not allow you to reassign it. Does anyone know if this is possible with any of the button manager programs? Do I need to flash the Kaiser ROM for this?
Also, the 8125 had a feature where you held this button down and it would swap the sound over to vibrate. If anyone knows how to get this working on the Kaiser, I highly recommend it. Beats having to pull the phone out of the holster/case to silence it, especially in a meeting.
Search for the answer.... It is here.
tried searching on push to talk. searching on buttons brings back a ton of results, none of which are specific to this particular problem. any suggestions on where to search and for what term or phrase?
Update, I found one... over in the hermes forum. This would be a good addition to the cab list sticky now that more folks are getting the AT&T ROM.
http://forum.xda-developers.com/showthread.php?t=279585&highlight=push+to+talk+map
I'll update after I have tried it on the Tilt
PTTFix work fine per the tread reference above but even though it allows you to assign a program to press and hold, there is no program "per se" to enact the vibrate setting. I do see this option on the HTC Home Screen though so maybe it is possible to create a shortcut in the Program Files directory and call it indirectly. I'll try this later when I have some time, but if anyone else gets to it first, please do share. TIA
this will do it for you.
I was never a fan of PTT anyway... Thanks for the CAB Tim. Works like a charm. For those curious, the option to select Vibra switch will be found under Settings > Buttons. Remap Button 6 to Vibra (Switch).
Spoke too soon. The PTTFix cab showed the buttons under the setting window, but after setting them, it still brought up the PTT screen. I though perhaps it needed a soft reset, and after doing so the ability to remap the PTT button disappeared.
isdereks, did you try this on the Tilt or the Kaiser? I am thinking the latter, since the PTTFix.cab shows the PTT button as a second button 5. Perhaps this is part of the problem of why it looks like it allows the setting, but doesn't actually work.
Bummer. I am quite disappointed. On top of all the bloatware, you get a button that launches an app that immediately errors out as I am not a PTT subscriber. HTC and MS should be pissed that AT&T is making the iPhone look like a clear winner. Pretty soon Apple will be running comercials with the big bloated guy for the iPhone too.
Sorry forgot to mention that I did this on the Kaiser.
yeah the new PTTFix did not work on my tilt, but worked great on my 8525. I hope this gets updated for the tilt.
http://forum.xda-developers.com/showthread.php?t=334759
yeah tried all that and the reg settings do not stay after phone is shut down.
Worked for me. You have to read the whole post.
For my own purposes as well, here are the consolidated steps to take. Until someone improves on this, I keep all this stuff in a directory so I can reconfigure my device as necessary. Here goes...
I think the trick is the PTT settings take precedence when the device boots up so delete the PTT registry settings under HKLM/Services/PTT. Delete the whole sub tree, then
From HKLM\Software\Microsoft\Shell\Keys
Add a new key called "40C6"
Add a string under the key called "Name" with the value "Button 6"
Add a new key called "40C7"
Add a string under this key called "Name" with the value "Button 6 (hold)"
(Note, do not enter the quotes, thare are to delimit what belongs in the registry entry)
Go to the Buttons settings and assign a program to the new entries. I di Voice Dial and Vibra (Switch) from the link earlier in the this post.
Do a soft reset which will remove the PTT settings from the buffer and enable your key changes.
Thanks for all the help.
I'd say the only caveat is if you some day want to use the PTT features, it would be a good idea to take an inventory fo what is under the PTT node in the registry.
It worked "GREAT". Thanks and so easy even I could do it
Instead of deleting the "PTT" key, i suggest simply renaming it to "PTTbak". That way you can just rename it back to "PTT" if you ever need to use it.
Thats what i did, and it works fine.
BTW, excellent work everyone. After upgrading to the tilt from the 8525 i lost 2 side buttons (comm manager button and the PTT button)... now i've got at least one back!
Maybe someone could offer a suggestion. For the life of me, I cannot get the reg entries of 40C6 and 40C7 to stick. I am using PHM Registry Editor. I am powering down and back up. Anyone have any suggestions?
Gator5000e said:
Maybe someone could offer a suggestion. For the life of me, I cannot get the reg entries of 40C6 and 40C7 to stick. I am using PHM Registry Editor. I am powering down and back up. Anyone have any suggestions?
Click to expand...
Click to collapse
did you delete the ptt key? (or at least rename as was suggested above?)
if you did try using the phone for while after you make the registry changes - run some other programs - then power down
greg
Greg, I renamed it and then nothing would happen. no button map and no PTT action. I am about ready to give up. But I will try your suggestions. Thanks.
NOw I got the PTT action back (the PTT screen pops up) but I cannot get the the button to do anything. I made the hold vibra and the direct push VC. Now nothing happens. Not sure what I did wrong. Not a noob at reg edits and I don't see anything wrong.
Oh well, not that big a deal, but am still open for more suggestions.
i tried renaming the PTT registry key and it didnt work. actually deleting it worked.
REG PTT
After doing the reg posted above the PTT button is free but you will notice after you push it, before the new app assigned to it pops up you will see the ptt screen for a second. What if the phone things you are using the ptt function and not Voice command or Viigo like I am?
Hi,
I've successfully re-mapped the PTT button by following the instructions from this forum. I imagine the same procedure would apply to the small OK button immediately below the jog-wheel, but I don't know where to start. Of course, the button is not present in the Settings/Buttons applet - that would have been too easy.
First, how to disassociate it from its present function (Start Menu/OK)? And once disassociated, what is the button code to enter in the registry?
I tried aebplus, and it sort of works - but the start menu still comes up on the first keypress if invoked in the Today screen.
Any ideas on how to re-map this otherwise useless key?
Thanks,
Mike.
mpd said:
Hi,
I've successfully re-mapped the PTT button by following the instructions from this forum. I imagine the same procedure would apply to the small OK button immediately below the jog-wheel, but I don't know where to start. Of course, the button is not present in the Settings/Buttons applet - that would have been too easy.
First, how to disassociate it from its present function (Start Menu/OK)? And once disassociated, what is the button code to enter in the registry?
I tried aebplus, and it sort of works - but the start menu still comes up on the first keypress if invoked in the Today screen.
Any ideas on how to re-map this otherwise useless key?
Thanks,
Mike.
Click to expand...
Click to collapse
yes, i would like to find this out as well because i have PTT assigned to comm manager and voice recorder but now i need one toggle between vibe and ring...would be nice to use this ok button i thing its pretty useless since there is anothe ok button on the front...TIA...
me too!
I also need to change the side "ok" button. Anybody have a solution?
Hello! Care if I do a quick search FOR YOU since you do not want to?
http://forum.xda-developers.com/showthread.php?t=277639
http://forum.xda-developers.com/showthread.php?t=286658
http://forum.xda-developers.com/showthread.php?t=274644
http://forum.xda-developers.com/showthread.php?t=336438
You sound like a jerk for posting that I did not search when the reply prior to mine was 6 months ago.
Did you even read the thread? None of the links you posted had instructions/advice on how to remap the side "ok" button.
grizzley said:
Hello! Care if I do a quick search FOR YOU since you do not want to?
http://forum.xda-developers.com/showthread.php?t=277639
http://forum.xda-developers.com/showthread.php?t=286658
http://forum.xda-developers.com/showthread.php?t=274644
http://forum.xda-developers.com/showthread.php?t=336438
Click to expand...
Click to collapse
yes i was about to say. non of them have steps or even telling you anything related to how to get it.
all it says is people trying it matter and they failed.
if there was no solutiion you should have just said no solution, it would have saved you time searching all that and also us bashing you
the 4th link does have some good information, lemme just quote from it
Bellfazar said:
The side "ok" button is a tough one because it has multiple functions. In programs, explorer windows, and settings it acts as an OK button but when you're at the today screen it acts as a Start Menu button. I kinda get the feeling we're not going to be able to change this for a while. Not until someone releases a keymapper specifically for the Kaiser.
Click to expand...
Click to collapse
strikeIII said:
even with the 8525 nobody has been able to re-map the ok button...it's still the biggest mystery, hehe....but now that they eliminated one button on the Tilt we really do need the ability to remap the ok button now...
Click to expand...
Click to collapse
Deathace said:
I have the side OK button remapped in spb pocket plus v4 under the buttons menu in settings and the only thing you have to do is take focus off the start menu then it works as expected.
Russ
Click to expand...
Click to collapse
It's really easy with help of AE Button Plus.
You can pretty much map any hardware key on your device with this great app.
I have it setup to be able to copy and paste by using the sliding keyboard and pressing Window Key + C to copy and Window Key + V to paste among other cool shortcuts.
Cheers!
RayanMX
Rayan said:
It's really easy with help of AE Button Plus.
You can pretty much map any hardware key on your device with this great app.
I have it setup to be able to copy and paste by using the sliding keyboard and pressing Window Key + C to copy and Window Key + V to paste among other cool shortcuts.
Cheers!
RayanMX
Click to expand...
Click to collapse
Thanks Rayan. I downloaded the AE Button Plus program for my AT&T Tilt, and it is working fantastic for remapping buttons. I was able to remap the side OK button to lock my phone by holding it for a few seconds. I love the way it also lets you leave the button with its default setting for one press, but create other actions for multiple presses.
By the way, the phone locking works fantastic. It allows me to answer calls, but doesn't activate any of the other phone functions until I unlock the phone. That's perfect for carrying the phone in my pocket. Also, incoming notifications don't unlock the phone, so that I won't accidentally turn-on a bunch of applications while the phone is in my pocket. The unlocking action is very simple.
I've also mapped volume up and down to a long press of the soft keys. That alleviates the need to use the stylus to select the volume button. Great.
The AE Button Plus program was what I've needed all along to customize my phone. It would've saved me a lot of time.
One other note, I downloaded the 2.6.3 version of the program, rather than the freeware version, but I haven't gotten any info on the cost. I may be disappointed in the near future if this program automatically deactivates. Do you know if I should expect a disappointment? I would pay for this program, but I'm not sure how much it's worth to me, but I saw no information on the cost. Do you know?
AFAIK there is only one version, if you want the registered version you buy a license and there's a procedure to activate it, otherwise it uses the free version with a couple features disabled and a nagscreen once in a while.
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
it cant be this simple...
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
closet410 said:
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
Click to expand...
Click to collapse
Connect device to PC. Use Active Sync to move the (unopened/unextracted) CAB file to your device (storage card or if not main memory).
Then on the device use file explorer to find the CAB and tap on it to install it. Choose install to main memory for this CAB.
AND follow above posters advice to ensure the plugin is set to show on the Today Screen.
Mike
not that simple
jymbrittain said:
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
Click to expand...
Click to collapse
already done that.
ditched the original link and downloaded schen's version on these very forums. so far so good!
look for schen's HTC Home at pocketemu.com. Then download HTC Home Customizer from the same Link and use it to customize your HTC Home.
weather
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
closet410 said:
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
Click to expand...
Click to collapse
2 ways
HHC can do it for you under one of its tabs
or
Go to the weather tab on HTC Home, tap on your city name and change it from the Menu option corrosponding to the right soft key.
Play around with it first and see if you can figure things out.
I downloaded the home plug and schen's cab, but the today screen only appears as the HTC home plug should appear. I tried reinstalling the cab file, but nothing changed. I can't find it under settings.
:EDIT:
I'm not even gonna bother deleting my previous post here. That was dumb of me. I thought I was to look around in the settings... Then I checked programs. You may now bash.
Screen not responding to the stylus?
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Have a screen protector??? May need to adjust the sensitivity. Don't have the exact key, but I know it's in several posts. try filtering your search with the term pressure threshold.
No, it happened to me today too
Tilt w/Duttys latest.
I was reading email, when suddenly the touch screen stopped working. I could use the DPad, but no response to touch. Opened and closed the keyboard, still no response. Soft booted and it went back to normal.
I have had it happen 2 or 3 times on my tilt with dutty previous release. Rebooted and it went back to normal.
The problem is usually related to FTouchFlo, a simple soft reset cures the issue. If you don't have FTouchFlo installed, I'm not sure what could be causing it
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Me too!!!
closet410 said:
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Click to expand...
Click to collapse
Check out this thread. http://forum.xda-developers.com/showthread.php?t=337979
I did everything in it, but sometimes my screen stops and freezes for a few seconds. Sometimes it gets so bad that it freezes like every 20 or 30 seconds when I am typing something using the stylus. I don't think I have touchflow because I never installed it. I just have the stock HTC rom.
Any ideas greatly appreciated.
fone_fanatic said:
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Click to expand...
Click to collapse
same here. i removed touchflo all together
i got it working again. just had to realign the screen.
What we browser are you using?
I have an att tilt so i have internet explorer mobile and im not really feelin it to much. what browser are you guys using?
many people like the latests beta opera mobile