Watching videos with screen tilted ? ? ? - Tilt, TyTN II, MDA Vario III General

Allright, so I've done my searching around and can't find a post or thread that talks about what to do to get the video's to take up the hole screen when the kaiser/tilt is tilted toward me!!! If I go fullscreen without sliding the keyboard out and tilting it it looks and plays fine. But when i slid out the keyboard it goes into TINY screen mode and even if i try to set it to full screen, it won't take up the entire screen and its either upside down or right-side up.
I would like to be able to actually use my tilted screen for movies!! Not just texting. Please, someone point me in the right directions.
(Oh and I'm using TCPMP RC2)

Globalrebel said:
Allright, so I've done my searching around and can't find a post or thread that talks about what to do to get the video's to take up the hole screen when the kaiser/tilt is tilted toward me!!! If I go fullscreen without sliding the keyboard out and tilting it it looks and plays fine. But when i slid out the keyboard it goes into TINY screen mode and even if i try to set it to full screen, it won't take up the entire screen and its either upside down or right-side up.
I would like to be able to actually use my tilted screen for movies!! Not just texting. Please, someone point me in the right directions.
(Oh and I'm using TCPMP RC2)
Click to expand...
Click to collapse
Sorry, but is there an RC2 of TCPMP?? Is this the commercial version of it because I only have RPC1 and it works fine!
EDIT: Apolgies, mine is RPC2 (but works fine??) Click full screen then open your Tilt. See if that is OK.

I just downloaded the TCPMP that is in the index of kaiser cabs, and it works now. . . very odd if you ask me. But, who cares . . it works. . . here is the link for anyone who comes upon this . .
http://www.cinetsystems.com/xda/index.php?path=Kaiser+Cab+Collections/
Its called Duttythroy The Core

Related

kaiser 2 major issues! (opinion)

No need to repeat the plethora of good things about the kaiser.......BUT
Here is some issues that -in my opinion- need to be fixed (feel free to add your own)
1. when you select "when device is off, lock all the buttons except power button" it doesnt disable the keyboard slide from activating/turning on the device (usually in the most inappropriate moments) like when in your pocket
2. this issue is universal among all PPC devices, and its very annoying ( oddly enough no one else seems to think so). THE TOUCH SCREEN SHOULD NOT BE ACTIVATED WHEN THE PHONE RINGS OR FROM ANY OTHER KIND OF NOTIFICATIONS!!!!!!!
Thats why we have hard buttons! Picture this scenario if you will.
When the phone rings the screen shows the caller (the touch screen is not activated) if you want to take the call/or respond to a notification you can use the "phone/green" button to take the call (touch screen is still deactivated), if you need to used the touch screen you can then press the power button to activate it......this way you are not using the touch screen with your ear or in your pocket if a call or a notification goes unanswered
BTW there is a big issue that cant be solved.I'm only posting it in case HTC is reading this THIS PHONE WAS DESIGNED FOR LEFT HANDED PEOPLE!!!!!!
to be continued.....
why do you think that it "was designed for left handed people" ?
Hi, I just go mine yesterday but I can't really understand why do you think it was designed for left handed people ?
hanza said:
Hi, I just go mine yesterday but I can't really understand why do you think it was designed for left handed people ?
Click to expand...
Click to collapse
Scroll wheel and OK button are on the left But I find it convenient because this configuration combines nicely with the right finger for seamless navigation on the device
victoradjei said:
Scroll wheel and OK button are on the left But I find it convenient because this configuration combines nicely with the right finger for seamless navigation on the device
Click to expand...
Click to collapse
Sorry, I'm slow. If the scroll wheel and OK buttons are on the left, and I hold the phone in my left hand (because I'm right handed and I want the stylus in my right hand) then I would use my left thumb to access the scroll wheel and OK buttons, which seems perfectly intuitive. I must be missing something.....
well nunmber 1 you might have a point it does not realy bother me tho as i always keep my ppc in a case not my pocket so have never had the keyboard open on me.
Number 2 is a feature not a promblem. personaly I love that it comes on and lights up when there is a incoming call. Esp when im in a nosiey room ect and i would not be able to hear the ringer anyways.
number 3 well I just think your way off base here. Im right handed and I always felt the old wizard/tytn where the ones that where backasswards. But then again this is coming from someone in his mid 20's who grew up with game controlers with the main movement keys on the left so it just feels right to have the kaiser setup that way also. And being able to use the stylus in my right hand while useing the main control in left feels correct.
magnamar said:
well nunmber 1 you might have a point it does not realy bother me tho as i always keep my ppc in a case not my pocket so have never had the keyboard open on me.
Number 2 is a feature not a promblem. personaly I love that it comes on and lights up when there is a incoming call. Esp when im in a nosiey room ect and i would not be able to hear the ringer anyways.
number 3 well I just think your way off base here. Im right handed and I always felt the old wizard/tytn where the ones that where backasswards. But then again this is coming from someone in his mid 20's who grew up with game controlers with the main movement keys on the left so it just feels right to have the kaiser setup that way also. And being able to use the stylus in my right hand while useing the main control in left feels correct.
Click to expand...
Click to collapse
Ok, the keyboard slide is causing a problem for me (it turned on twice in my pocket as I got on my motorcycle) Ive only had it for two days
(i guess baggy pants could solve that...but its still a flaw)
On number 2, I think you misunderstood! I'm not suggesting that the SCREEN shouldn't turn on, but I insist that the TOUCHSCREEN (the touch function) is useless and annoying if it comes on automatically when the phone rings or when a text message comes in.
In the past I tried to use "TPEnable" and "TPDisable" in order to shut off the touch function, and when I had the HTC Wizard I would just reach on top and hit the power button after I answered the call (so that the screen wasnt on while I had the phone in my ear) but now, with the relocation of the power button on the Kaiser its harder to do
As far as the "lefthanded" issue is concerned, the idea is for WM6 to be used with ONE HAND, so the "holding the stylus with my right hand argument" that many people have suggested would not be popular with the WM6 folks, since a big part of advertising their new OS was its "ONE-HANDED OPERATION"
I agree though, that if we look beyond the "one handed use", the interface is intuitive and easier to use with two hands
Well....no one can do anything about the hardware at this point but I hope someone can shed some light on the touchscreen issue
Thanks
warwickwebb said:
Sorry, I'm slow. If the scroll wheel and OK buttons are on the left, and I hold the phone in my left hand (because I'm right handed and I want the stylus in my right hand) then I would use my left thumb to access the scroll wheel and OK buttons, which seems perfectly intuitive. I must be missing something.....
Click to expand...
Click to collapse
nahhh !!
Picture the keyboard slided out already ... that's what the OP meant by -->> LEFT HANDED
I think it's only 1/2 crippled ... because at the HTC home today, you have the option to rotate the screen at 90 >> L << degree angle ... though making it more then "right-hand-do-able" in landscape games and the buttons are at my right thumb --->>>( keyboard CLOSED by the way )
it's only when the keyboard are slided out that it becomes "left handed" ...works for some due to right hand stylus
MY GRIPE is with the "VIDEO CONFERENCING" camera !!
see here:
http://forum.xda-developers.com/showpost.php?p=1506877&postcount=1
gotta be a fix for it "SOON" down the road ??
~~~
spiro said:
..I'm only posting it in case HTC is reading this THIS PHONE WAS DESIGNED FOR LEFT HANDED PEOPLE!!!!!!
to be continued.....
Click to expand...
Click to collapse
I'm throwing in the FRONT camera issue !! haha ha

Touchscreen won't work!

My touchscreen won't allow any input. I tried hard reset, reflashing ROM and radio - nothing helps so far. Now it's stuck on the 'tap the screen to setup your device' on the initial setup screen. The buttons work, slide works, but touching the screen won't. Any ideas? I saw the posts about frozen screens, but I don't think this is it.
Ozark_8125 said:
My touchscreen won't allow any input. I tried hard reset, reflashing ROM and radio - nothing helps so far. Now it's stuck on the 'tap the screen to setup your device' on the initial setup screen. The buttons work, slide works, but touching the screen won't. Any ideas? I saw the posts about frozen screens, but I don't think this is it.
Click to expand...
Click to collapse
Maybe its a loose connection?
Uh - is there a way to tighten it??? ;-)
Any ideas? If the screen is hosed - any suggestions as to who could repair it?
Bump? How about difficulty in replacing the screen on these?
Ozark_8125 said:
Bump? How about difficulty in replacing the screen on these?
Click to expand...
Click to collapse
just did mine, it's not TOO bad.. just 4 screws and a lot of careful prying but it's definately doable. There is a how to somewhere on here. If I were you I'd try the tool that lets you skip the screen setup and see if your touch screen works otherwise... strange thing is when I try to align my screen right now it freezes my phone on the "align screen" screen... so hopefully that's what is happening to you and you dont need a new screen. so yeah look for the align screen skip and see if it works.
Thanks for the info - I'll look around for the skip alignment tool. I assume the screws were those outer four teeny tiny torx screws?
OK - Dude - how crazy is that... it just started working again. I just kept hitting around on the screen by forcing it to alignment and it's now working. What gives? I saw a post about magnetization screwing up alignment, but this is kind of crazy. It works if I push the screen part of the phone 'south' and then I can tap and get the alignment to complete. Loose connection somewhere, I'll check out those guides to figure out if the ribbon is tight or not.
Ozark_8125 said:
OK - Dude - how crazy is that... it just started working again. I just kept hitting around on the screen by forcing it to alignment and it's now working. What gives? I saw a post about magnetization screwing up alignment, but this is kind of crazy. It works if I push the screen part of the phone 'south' and then I can tap and get the alignment to complete. Loose connection somewhere, I'll check out those guides to figure out if the ribbon is tight or not.
Click to expand...
Click to collapse
glad to hear you've got it working and saved yourself a headache... you might want to try sliding it open and giving it a squeeze below the screen but above the buttons... that's where the screen attaches to the board... give it a try.
OK - more of a 'tard moment for me - the screen protector was jamming against the screen. I figured that out after I had the whole back off and pried open to look internally to see what was going on and then noticed the screen was working fine with the back off.... oh geeze, time for a stiff drink. Thanks for the suggestions - you guys are cheap therapy bahahahahhaaaa!!!
Look out for dust particles
Glad you found out what was wrong. I would like to add that in general, if a touch screen is unresponsive, examine the device for dust particles stuck between the plastic and the touchscreen. It will be understood as a tap by the touchscreen, thereby rendering your own tabs unrecognized. I've tried that 2 times now.
I had a similar problem with my touchscreen. Sometimes it doesn't recognize my touch with a finger or stylus. I have to keep pushing the same spot for it to register the touch.
Now I took a needle and cleaned the space between plastic and touchscreen. For now it seems that it helped. Lets see how it works for now on.
Thanks.
ha ha ha ha ha!!!!
at leats you admint the retardness
D'oh.. the problem stays. Do I have to open the whole machine, and clean it that way, or can the problem be in the software?
I think, that after a soft reset the screen works properly, but after a little while it overlooks some of my taps.
What SPL are you running? Are you experiencing the 'screen freezes'?
"XDA-Developers HTC Kaiser HardSPL CID Unlocker v1.0" says in the readme.txt file. Does 'screen freezes' mean that I can't do nothing with the screen, or what? What is the SPL's job in the PPC, I thought it was needed only for the OS flashing.
OK, now I know what you mean with screen freeze. It sure does freese. So the problem is not in the touchscreen, but in somewhere else? The whole phone freezes in time to time.
what spl are you running?
OK, I suppose that was a tip. Thanks for the tip. I upgraded my SPL from 1.0 Olipof to HardSPL 3.56.
Everything started going very smoothly for now. Lets see how it keeps being smooth after couple days of using.

I think my Sprint HTC Diamond is defective.

I just got the sprint version of the HTC DIAMOND Sunday, and this is my first WM device. Warranty is still good as well.
My problems:
1)
When trying to take photos or videos, the zoom constantly moves in and out regardless of me not pressing a thing (For example, when i open the camera, the zoom constantly moves from 1.0-2.0x all on its on). I don't know if it suppose to do this or not, but i don't think so. The same thing goes for viewing pics and Opera as well, it zooms back and forth without me touching a thing.
2)
Sometimes it seems as if the "end" button or buttons on the right of the center button,doesn't respond well. I try to hold it down to lock my phone, but it takes several tries in order to this. Maybe its just me
3)
Iv'e read that the center button susppose to act like a scrolling mechanism, but i dont think mine does. Has this feature been disabled or something?
Its a nice phone, but i think mine has a couple of bugs. The zoom problem really annoys me, because i cant take pictures with the camera zooming in and out constantly. Please help..
When using opera Or the camera rotate your finger around the center button(stay on the outside of where it raises)
With the end button try to press it on the far bottom right(as far from the center as possible.
I think the center as a scrolling thing has to be enabled
Calico_NC said:
I just got the sprint version of the HTC DIAMOND Sunday, and this is my first WM device. Warranty is still good as well.
My problems:
1)
When trying to take photos or videos, the zoom constantly moves in and out regardless of me not pressing a thing (For example, when i open the camera, the zoom constantly moves from 1.0-2.0x all on its on). I don't know if it suppose to do this or not, but i don't think so. The same thing goes for viewing pics and Opera as well, it zooms back and forth without me touching a thing.
2)
Sometimes it seems as if the "end" button or buttons on the right of the center button,doesn't respond well. I try to hold it down to lock my phone, but it takes several tries in order to this. Maybe its just me
3)
Iv'e read that the center button susppose to act like a scrolling mechanism, but i dont think mine does. Has this feature been disabled or something?
Its a nice phone, but i think mine has a couple of bugs. The zoom problem really annoys me, because i cant take pictures with the camera zooming in and out constantly. Please help..
Click to expand...
Click to collapse
Make sure when you are in the album or camera, your palm isn't covering the scrolling "ring" around the centre button, as this could be causing the zooming problem. If all else fails, hard reset.
Also, for the buttons to the right, make sure you are almost at or close to the edge of the diamond. if you are close to the center button, it may be acting as a "right click" (as the area to the right of the center "scrolling ring" is a "right" button).
- Hind1
thanks for the info, but when i say it zooms without me touching it, i meant that literally. For example, right now im looking at a pic in my phone. The phone is literally just laying on its back while I'm typing this message. Its constantly zooming in and out of the pic in real rapid movements. Could it be the screen protector that came with the phone? (But then again, it only happens when I load the camera/camcorder,search the web, or view pics) I have it on, but i didn't think that would be the cause. Anyone else encounter this problem? Maybe I should just do a hard reset, or maybe return it. IDK
Sorry to hear...
I have the screen protector on that came with the device, and mine is working fine. Try a hard reset, let me know if it works
- Hind1

Is this normal?!

Hey everybody. I've been using my Xperia for about 2 months now. However, while messing around with it the other day, I realized that it's kind of shaky. For example, if i "press" against the silver finish all the way to the right of the screen, the top part of the phone shakes a little (like it moves kind of inward). Also, when I press the bottom right soft key, the same thing happens. It shakes a little, and it's not too big of a deal but it's annoying.
Another thing is that the keyboard also slides out very easily. Like way too easily. While using the touchflo 3d with one finger (sliding to the right), for instance, unless my finger is completely dry and moving on the screen very smoothly, the screen moves to the right slightly (the way the keyboard opens).
Also, when the keyboard is out, if i "press" towards the top part of the screen, it also shakes. It feels kind of loose.
I just wanted to know, is this normal? If not, what should I do, as I bought this phone from ebay.
Other than this problem, I love my Xperia. It's very functional and like a mini PC. If it wasn't for this place, though, I think I would have probably been VERY, VERY dissatisfied with my Xperia (with the stock rom).
Thanks in advance. Any help would be appreciated.
Edit: My phone is a silver, Xperia X1i model.
I don't think that's normal. Do you tend to slide out your keyboard a lot? Have you noticed any cracks near the stylus btw?
Holy-!
How much force are you using on the screen?! My slider is exceedingly solid. Absolutely no give, and even if I use TF3D it doesn't move.
rickysio said:
Holy-!
How much force are you using on the screen?! My slider is exceedingly solid. Absolutely no give, and even if I use TF3D it doesn't move.
Click to expand...
Click to collapse
I think that's out of normal
My Black X1 has about 1mm play, on the left side. On the right side it is less, but it can be felt, exactly as you mention.
As for opening, I have no problem with that, it gives just reasonable resistance.
i try to peat as least pressure as possible while using tf3d. i also dont slide out my keyboard THAT much. and no, no cracks near stylues.
apparently, this is not normal. any advice?
redo the screen calibration, now applying as LITTLE force as you can to get the press registered, and try again. Xperia has some sort of vario force meter on the touchscreen - the more force you use during calibration, the more force you need during normal usage.
another issue i have with my phone (not hardware related) is the fact that when i use high quality on my youtube app, watching the video is sooooooo laggy. is there any fix for this
It's a limitation of the current app, most likely it's incapable of taking advantage of the native hardware decoding the MSM7200/7201/7200A/whatever chipset offers.

Does anyone else have an unresponsive touch screen?

I first noticed this on a running game where you have to hold down either the left or right side of the screen to move in that direction. It would usually register the first press, but not that I had held my finger down so I wasnt moving properly. I thought this was due to the game it's self rather than my phone.
I've just downloaded Naugh where you have to rotate the screen by touching either side of the phone, and again the same issue. It's really unresponsive - It will recognise the tap but not that i've held it, it will stop working. Occasionaly this will also happen when scrolling a page.
I did a quick google search and found that the Z1 had this issue, but havent found a fix.
Has anyone else experienced this? Or if not, any suggestions on figuring out whats wrong?
Edit: I recorded a video of exactly what I mean: https://www.youtube.com/watch?v=UW2gCWpThWc
I don't know if my problem with my screen is related to yours, but i'm experiencing some problems as well.
On the picture i attached in this post is a picture taken of my screen with a black background.
In the middle of the screen there is a slight discolouring, and in this particular spot the touch screen is very unresponsive, i'm especially noticing this when playing candy crush, making it almost impossible to swap the two candies in this particular spot
Both of these sound a bit like my problem was at first, but mine quickly got worse (in hours) and then I found the hairline crack in the screen.
Bottom corner and not in a part of the screen that displays anything - just the 'glass' front at the bottom - but a third of the screen near the middle doesn't respond to touch.
It gradually got worse over a couple of hours until it stopped responding altogether.

Categories

Resources