Hi all,
I recently updated to the official AT&T ROM on my 750. It updated the radio to 1.54.00.00 but I've been having lost signal issues in places where I used to get full signal. After looking through the forums, I've downloaded 1.54.07.00 to give that a shot. Only problem is, I'm not sure how to update just the radio.
Can anyone point me to some instructions on updating the radio?
Thanks in advance,
Chris
Check out my post http://forum.xda-developers.com/showthread.php?t=348271 as I figured it out.
N8NU,
Are you using Olipro's SPL bootloader?
I'm not using his bootloader, and was unable to flash the radio following your instructions. I've been doing some searching and haven't found how to update just the radio if you're not running a custom bootloader.
I'm assuming it's possible if Palm has a Recovery Tool that changes radio fw, although I'm not sure of it's inner workings.
Has anyone else had success flashing just the radio fw? I hate to be negative, but I'm having some issues with the official ATT WM6 ROM 2.25 with radio fw 1.54.27.00
Yes, I went through the unlocking process in the sticky. In the end however the radio was kept at v 1.2 something. So I added radio 1.5 and it works.
Related
I have applied the ROM's from Molski AKU 3.0.0 and have the newest radio 2.61 but when I boot it says that I have OS version 1.8.11.1 is that correct or is there a newer version. Also can someone outline the most stable of WM6 ROM's and maybe even links to there locations.
TIA
Ken
kendav911 said:
I have applied the ROM's from Molski AKU 3.0.0 and have the newest radio 2.61 but when I boot it says that I have OS version 1.8.11.1 is that correct or is there a newer version. Also can someone outline the most stable of WM6 ROM's and maybe even links to there locations.
TIA
Ken
Click to expand...
Click to collapse
No, I don't believe that is the proper OS version contained in Molski's ROM.
Do you have a G3 or G4?
If you have a G3 did you follow EVERY step in the Definitive Guide to Unlocking and Rom Upgrading G3 Wizards sticky post?
If you have a G4 did you go to the IMEI website (not sure of exact address but it is all over the forum) and CID unlock your phone? (This is the only currently known way to CID unlock a G4 device, using the G3 method will brick your phone)
If you are NOT CID unlocked you cannot install a custom ROM, you will only be able to install Official Roms released by your carrier. The phone may go through the steps and look like it is working but nothing will be overwritten and you will reboot with your previous rom, possibly with settings and data loss.
As far as WM6 roms go, scan the headlines of the first couple pages and you can find that answer for yourself by reading the ROM specific threads. Every user has different wants and needs and as such everyone will have different opinions about which ROM is "the Best' or "Most Stable". Note that all AKU 3.3 and WM6 roms have issues in one form or another, they haven't been released by carriers yet because they aren't stable. Read the threads to see if the known issues affect whether or not upgrading to one of them would be a good move for you.
As always if you aren't prepared for your device to be ruined you shouldn't be flashing at all. Granted flashing is relatively safe if you follow the proper steps for your specific device, most people like to jump in with both feet and skip they highly important part about reading and educating yourself first. I am not accusing you of doing this, but since your question seems to directly relate to an unlocking issue...
OK I have CID Unlocked as I am using a cingular 8125 on T-mobile without issue and I beleive it did flash correctly as I get the molski splash screen and the IPL/SPL were upgraded just not the OS. I have been doing ROM upgrades on other platforms of devices like the razor and the IPAQ H6315 so I think this is working correctly. I also was able to upgrade the radio from 2.?? to 2.47.1 to 2.61.1 without issue.
Am I Missing something. I used the lokiwiz ver 3a to unlock it.
Thanks for the feedback. Like I said I am not new to the upgrading just new to this platform(HTC Wizard)
kendav911 said:
I used the lokiwiz ver 3a to unlock it.
Click to expand...
Click to collapse
Yes you did something wrong....If the OS won't flash you're not CID-unlocked! Follow the sticky post by the letter (it mentions version 2b, not 3a). And make sure you have a G3 before downgrading. For G4 look at G4 section.
kendav911 said:
OK I have CID Unlocked as I am using a cingular 8125 on T-mobile without issue and I beleive it did flash correctly as I get the molski splash screen and the IPL/SPL were upgraded just not the OS. I have been doing ROM upgrades on other platforms of devices like the razor and the IPAQ H6315 so I think this is working correctly. I also was able to upgrade the radio from 2.?? to 2.47.1 to 2.61.1 without issue.
Am I Missing something. I used the lokiwiz ver 3a to unlock it.
Thanks for the feedback. Like I said I am not new to the upgrading just new to this platform(HTC Wizard)
Click to expand...
Click to collapse
you only need to SIM unlock to use a cingular phone on TMobile.
SIM unlock DOES NOT EQUAL CID unlock.
CID unlock allows you to flash non carrier ROMS into your phone.
Also Lokiwiz 2b is the recommended version for unlocking. I have read where people using other versions said it was successful when it actually wasn't. They tried using 2b and had success.
you guys are great I did follow the insturctions with the correct version and it worked like a charm. Now on to flashing WM6.
kendav911 said:
you guys are great I did follow the insturctions with the correct version and it worked like a charm. Now on to flashing WM6.
Click to expand...
Click to collapse
What version of WM6 are you going to work with?
is there anyway to "shelltools" flash my radio rom? I've been missing a lot of calls lately and it really is becoming inconvenient. I havent unlocked my phone, but i am running wm6 using shelltools (mfrazzz's stuff) and i was wondering do i even need to have my phone unlocked to flash my radio? i dont want to lose my warranty so thats why this matters to me. Any ideas guys?
You may get the official (in your case, T-Mobile, I guess) ROM to flash your phone with the full set of WM5 ROM (e.g. IPL, SPL, OS and Radio). As you are using the official ROM, you do not have to CID-unlock your phone prior flashing this official ROM. After that, you may then use shelltool to update/upgrade/flash the WM6 in, while the radio is untouched (e.g. still using the one you've flashed with the official ROM).
i thin i have done what you said already. Before i flashed mfrazzz's wm6 rom i flashed the latest tmobile rom, then i proceeded to flash the wm6 rom. I didnt use shelltools to flash the official tmobile rom obviosuly, but i did use shelltools to flash mrazzz's wm6 rom.
these are my things from what i'm using now:
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
ur OS is wrong if ur running wm6...
2.18 is Crossbow Reloaded... or Faria's..
Madcap180 said:
Flash the t-mobile uk radio rom 2.19.11.. that'll work for u.
Click to expand...
Click to collapse
can i just flash that right now without being unlocked? i'm in boston, does that matter? lol
Madcap180 said:
2.18 is Crossbow Reloaded... or Faria's..
Click to expand...
Click to collapse
oh, my bad then lol.
and yes u can change ur radio without being unlocked
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
There you go
jawnsixteen said:
ok thanks guys for all the help, but i still have a couple small questions
first, in this post http://forum.xda-developers.com/showthread.php?t=253609&page=4
(post #34) he says that if you dont cid unlock before applying the radio rom you will brick the phone.
next im looking for that uk rom, but i really cant find it, can anyone point me in the right place? and even though im in the US it will still work right?
thank you guys so much! i really aappreciate it
Click to expand...
Click to collapse
I have flashed my RADIO ONLY several times with no consequences for my CID LOCKED G4 Wizard, here´s the link for the RADIO ONLY
ftp://xda:[email protected]_Thread/T-Mobile-UK_2.19.11_Radio_Only.zip
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
4irm said:
You have flashed RADIO only on you G4? HOW? I am having the following problem:
I had to flash a T-Mobile German ROM to use the shelltool for the latest WM6 ROM, it worked but unforunately I have got Radio 2.69 and IPL 3.08.XXX1. (from the latest official MDA Vario ROM flash before)
After the Hardreset everything went fine - I've got WM6, but after i had changed the Clock settings and restarted my device i simply have NO SIGNAL anymore. I am currently in australia maybe thats the reason???
I tried to install the offical T-Mobile AKU 2.0, but the RUU shows me error 296 as I have installed a later ROM AKU3.3 bevor my WM6 flash.
Which tools have y used? And how is the procedure?
Cheers!!!
irm
Click to expand...
Click to collapse
No, we can´t flash a ROM with bootloader other than the one you have if you have a G4 CID locked device. Unless you use a RUU with no ID (see next paragraph) and the nb.nkf file lacks of IPL/SPL, such is the case of the Wizard Love which I use before to flash any other ROM with the Shell Tool.
Read post #2 of this thread
http://forum.xda-developers.com/showthread.php?t=310954
Read carefully where talks about Splash Screens and Splash Only RUU for G4, same procedure for splash screen applies to RADIO. This doesn´t work for OS, for OS you have to use Shell Tool.
Good luck!
Hi,
I have upgraded my Orange SPV M700 (UK) shipped roms to the following:
SPL-1.30.Olipro
AX3L_OS v2.0.8.2
I may have mis-understood from the readme but I thought the updated radio was part of AX3L's rom update as when it completed everything was updated except the radio version (this still showed 1.30.00.01 in device info. the ROM shows 2.0.8.2).
So I updated just the Radio to version 1.46.00.11 and the flash process completed ok, however still it shows 1.30.00.01 in device information.....any idea how to fix this?
I followed the guides on
http://trinityguides.info/index.php?option=com_content&task=category§ionid=4&id=31&Itemid=66
Apart from the radio not showing the correct version everything else is fine, GPS, etc. does work but I did notice it seemed to get very warm at the back of the handset (can't remember it doing this before the upgrades).
Thanks for any help.
hrdspl 1.30 desn't upgrae radio. Get flash witouth go in bootloader
So, are you saying start the radio rom upgrade without going into bootloader? Just want to confirm as the guides state otherwise...
http://forum.xda-developers.com/showthread.php?t=316274 I download the radio here and upgraded only the radio. I got error text the first time i tried to flash but when phone go to bootloader flash,it again, works perfect!
here you find the 1.46.30.11 radio too
ketma said:
So, are you saying start the radio rom upgrade without going into bootloader? Just want to confirm as the guides state otherwise...
Click to expand...
Click to collapse
Yes. In that way you flash with sspl.
Thanks for both your replies, flashed ok and now updated with 1.46.30.11.
Cheers.
can i just re-emphasize that it's quite dangerous to flash radios without hard-spl, and not the kind of advice you want to be giving out on this forum. If you're so convinced it's the Hard-SPL, load a different hard-spl before you flash the radio.. SSPL isn't a good alternative as all it does it bypass CID check, not protect your device in case of a bad flash
Switch back to SPL-1.20.Olipro and you can flash radio roms.
yes, please follow the guides on the site, which now reflect the option of going back to old hard spl if 1.30 doesn't seem to be working.
it is not good advice to be handing out in the forum that people should flash radio without hard-spl. You guys are going to wind up responsible for a lot of noob bricks, and you're lucky you don't have one yourself
can anyone give me a step by step on how to flash my ROM back to STOCK?
if you want it for warranty reasons then you will need to flash the SPL also to stock. you can just download the latest ROM from HTC website and flash it. it will give you the stock ROM on the existing SPL.
End of the post http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1.
Remember you will also need to go back to stock spl if for warranty purposes.
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
7896zx said:
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
Click to expand...
Click to collapse
nevermind what i said there, for sum reason it works again now
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
accountabc said:
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
Click to expand...
Click to collapse
That depends. What was your original rom and spl? Are you entitled (via location) to use the new EU rom, eg if you live in America then this may not be acceptable to HTC.
When you boot up the new rom, are the screen colours ok as this will tell you if you have the right spl for your rom? If you have the latest EU rom, I doubt that 1.14 spl would be the right one, but it could be I guess. With the stock rom, you should also get the stock radio. So provided you have the stock rom available to your area, with the correct matching spl and the radio, there is no way to tell of your exploits
Thanks for your reply
The problem is that the screen of my device won't turn on anymore (Device powers on, I can connect with activesync, digitizer works fine) so i have no way of checking if I have the right SPL or not...
I also have no idea what my stock rom/spl/radio version was.. I live in the Netherlands, and through the official HTC site i flashed the latest rom, which included a radio (a radio version was part of the filename). What I'm trying to find out is:
Could 1.14 have been my stock SPL, or was that version never used on any Dutch Blackstone?
If the spl doesn't match the rom (wrong colours) that isn't much of a problem; I can tell them I tried to update my rom because I thought maybe my screen would work again after I installed the latest ROM... But if I have a SPL that was never even used I don't think they will buy that
According to the wiki there are 2 Dutch roms - one would require a 1.14.0000 spl and the other a 1.54.0000 spl. So I guess either of those would do.
When you flashed the rom from the website, where you still using hspl or uspl? Depending on the rom you flashed you will need to flash the matching spl. Do you have the full notation/naming of the rom you flashed. This should give an indication of which spl you will need.
As much as I appreciate ClydeB1 for assisting you, I fail to see a reason for this thread. A thread already exists for flashing advice, i.e. the dummies guide. Also the HardSPL thread exists and has advice on how to flash back to stock. So depending on your query post in either of these.
The initial query and reason this thread was created has been answered, so no need for this thread to remain open. Thread closed
Another noob question here.
How would i go about checking to see which radio version and SPL version im running?
i havent updated them since i originally rooted my phone months ago (1 touch root method for rogers dream) and i cant remember which SPL i installed (haykuro's i think)
is there any benefits to upgrading radio and spl?
are there different versions of radio and spl??
i know i can grab haykuros from http://code.google.com/p/sapphire-port-dream/
thanks for helping a noob who is wanting to learn..
digitaljeff said:
Another noob question here.
How would i go about checking to see which radio version and SPL version im running?
i havent updated them since i originally rooted my phone months ago (1 touch root method for rogers dream) and i cant remember which SPL i installed (haykuro's i think)
is there any benefits to upgrading radio and spl?
are there different versions of radio and spl??
i know i can grab haykuros from http://code.google.com/p/sapphire-port-dream/
thanks for helping a noob who is wanting to learn..
Click to expand...
Click to collapse
check your spl and radio by booting into fastboot: camera+power
thanks a bunch looks like im running the latest
the point isnt running the latest but rather a non perfect spl (usually 1.33.2005). doing so allows you full access to fastboot commands and such.