Related
Just upgraded from the Blue Angel to Cingular's 8125 Wizard and I'm like a kid on his birthday. I especially like being able to initiate a phone call from my HS850 BT. Curious if someone has the registry settings to point to Microsoft Voice rather than Voice Dialer.
Thanks in advance!
Steven
WIZA100
ROM version 1.8.11.1 WMe
ROM date 11/24/05
Radio version 01.09.11
Protocol version 4.0.13.20
ExtROM version 1.8.11.103
Voice command activate via btooth
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Thank you SO much! Works flawlessly. Curious if anyone prefers the Smart Dialer rather MS Voice? It works so nice, even though sometimes it sounds like it's on helium....
Thanks again!
Man I just love this Wizard!
Steven
WIZA100
ROM version 1.8.11.1 WMe
ROM date 11/24/05
Radio version 01.09.11
Protocol version 4.0.13.20
ExtROM version 1.8.11.103
VoiceCommand is much better! To complete your wizard you need to get TomTom navigator 5 with the bluetooth gps receiver.
Found this regarding completely ripping out Cyberon Voice Dial...
http://www.beyondthetech.com/blogs/wm/2005/10/clearing_out_the_traces_of_voi.html
Re: Voice command activate via btooth
nmonger said:
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Click to expand...
Click to collapse
Will this work on the T-mobile MDA? How do you edit the registry?
Re: Voice command activate via btooth
tbrown801 said:
nmonger said:
goto "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path". Change the default value from "\Windows\SDDialer.exe" to "\Program Files\Voice Command\VoiceCMD.exe".
Now you should be able to activate Micrsoft Voice Command by pressing the connect button on your bluetooth headset.
Click to expand...
Click to collapse
Will this work on the T-mobile MDA? How do you edit the registry?
Click to expand...
Click to collapse
Thanks this worked great. I can even listen to music on my bluetooth headset now.
Hi guys.
Oh yes... I sure would love to use my BT headset as well!!
So I changed the default value for the "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\Path" from "\Windows\SDDialer.exe" to "\Programme\Voice Command\VoiceCMD.exe" (I am using a german device) but it doesnt work. Anybody got this trick working on a Qtek 9000?
Thanks in advance!
Amen
msvc
where can I get a really chaep copy of voice command?
I tried this too and I can't get it work right. The BT button doesn't call voicecommand consistantly, and when it does, the synth speech from VC doesn't come through via the BT headset. Meaning If I say "Call Tony" I won't be able to hear VC's reply of "on Mobile or Home". This is annoying. I'm using US T-mo MDA Vario. Perhaps the path or the name isn't consistant across the board?
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?
adbo said:
I tried this too and I can't get it work right. The BT button doesn't call voicecommand consistantly, and when it does, the synth speech from VC doesn't come through via the BT headset. Meaning If I say "Call Tony" I won't be able to hear VC's reply of "on Mobile or Home". This is annoying. I'm using US T-mo MDA Vario. Perhaps the path or the name isn't consistant across the board?
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?
Click to expand...
Click to collapse
Did you also run the Registry Wizard tweak "Enable Bluetooth Receive". This is what allows the headset to receive the incoming sound from the Pocket PC. Also on my phone I have to tap my Bluetooth headset twice, but it is consisitent, and I can tell the Voice Command beep from the other tone.
Hi guys.
Looks like you need the right Bluetooth profile for this hack.
I first tried it with my old Sony Headset (HBH-30) using a "Headset" profile. I could use it for regular phone calls, but I was unable to place a call using Microsoft Voice Command. After this, I tried a Plantronics Bluetooth headset ("M2500 Mobile Headset") and this one came up with a profile called "free speech mechanism" ("Freisprechen" on my german device). This profile works like a charm; I only have to press and hold the call-button for a moment and MS Voice Command comes up.
The only frustrating thing is that the device has to be in "pda mode" to place a call using voice command. If I fold up my Qtekk 9000, it doesn't work; but at least I can use the headset in the car now.
Hope this helps
Amen
On my Cingular 8125 I didn't create any BT profile for Motorolla HS850. Typically I press the button 1 or 3 times slowly then I hear the VC response. With the 2.8.7.102 ROM the VC sounded like Tiny Tim but with this 2.16.9.101 it sounds like it's susposed to.
ROM version: 2.16.9.1 WWE
ROM date: 2/6/06
Radio version: 02.07.10
Protocol version: 413.1.03
ExtROM version: 2.16.9.101
VOICE ENABLER< MS VOICE COMMAND
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Re: VOICE ENABLER< MS VOICE COMMAND
getho said:
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Click to expand...
Click to collapse
Hey my first post here!, tried this software just now, and works great. Easy to switch back when needed. thanks for the link.
As for the person who got music to play through BT: is it stereo? How did you make that work? Why does that has to do with VC?[/quote]
what registry wizard did you use that allows enable recive
Did you also run the Registry Wizard tweak "Enable Bluetooth Receive". This is what allows the headset to receive the incoming sound from the Pocket PC. Also on my phone I have to tap my Bluetooth headset twice, but it is consisitent, and I can tell the Voice Command beep from the other tone.[/quote]
Re: VOICE ENABLER< MS VOICE COMMAND
kzaidi said:
getho said:
I found this lil piece of software, havent gotten chance to try it yet, but it may solve this problem! (using BT with ms voice commander)
http://www.burling.co.nz/Default.aspx?tabid=151
please let me know if it helps
Click to expand...
Click to collapse
Hey my first post here!, tried this software just now, and works great. Easy to switch back when needed. thanks for the link.
Click to expand...
Click to collapse
ok is it just me or is any one else haveing problems tring ot down load or register on this site
where can I get a really chaep copy of voice command?
Click to expand...
Click to collapse
You can get a really cheap version here
http://buzzdev.net/component/option,com_remository/Itemid,109/func,select/id,37/orderby,2/page,2/
Made a cab file on that registry
edmondt said:
Made a cab file on that registry
Click to expand...
Click to collapse
works well most of the time
there is a few times it does not link right but
still do not hear the incoming from the htc
how can i disable the palm dialpad??
i want to have the orig WM5/6 dialpad.
thansk for the effort!
erezj said:
how can i disable the palm dialpad??
i want to have the orig WM5/6 dialpad.
thansk for the effort!
Click to expand...
Click to collapse
It was described many times. Using memmaid or sktools disable Active Call today plugin.
Then in registry set:
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled=0
Good luck!
thanks!!!
just one small thing...
what is the name of the service i need to stop viathe memaid?
erezj said:
thanks!!!
just one small thing...
what is the name of the service i need to stop viathe memaid?
Click to expand...
Click to collapse
It's not a service. It's a today plugin, but you can see it only with special tools. And it's called Active Call.
disables speakerphone
I made this registry change on my WM6 Treo 750 and after I did it I did get the original dialpad. bbut once you make a call the Palm version of the dialer pops up in front of the other dialer. It also disables the speakerphone.
Could someone please post a picture of the standard dialer in the Kaiser?
Here's a picture of mine:
Thank you.
This is the default WM6 dialer (not sure whether it has smartdialing enabled, but usually it does). You can try switching to the HTC dialer with KaiserTweak, but that might not work (if the dialer images are not on the phone). If it doesn't work - just revert back using KaiserTweak to the WM6 dialer . Personally I prefer this dialer with smartdialing because the contacts that were dialed before show up first when dialing a name...
Also - I think schap has a dialer too - something called reTouched or so. But I didn't try it...
Thank you
But I will need a dialer with local language support.
This is not the default WM6 dialer, This is the default WM5 dialer...
I was told the same in a local forum
The question is, which dialer can I install that will support other languages?
Another option would be to customize the skin of a dialer that I like and will fit the Tilt. In this case, can anyone point me to the exact steps required to do so?
Thank you.
Don't know about localizing. Regarding whether it's the WM5 or WM6 dialer, what's the difference? When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Nika, could you please expand on that?
nikagl said:
When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Click to expand...
Click to collapse
I use EZDIAL on my Tilt, and I had the default smart dialing turned on.
This resulted in the EZDIAL serch results being obscured by the smart dialing popup window (which basically emulates what EZDIAL does, only with a nicer presentation).
I then turned off smart dialing, and can now see the EZDIAL results on screen.
But the thing is, I wanted to use a nicer smart dialer than EZDIAL, and tried to install a localized one posted in a local forum by Nadavi (a distinguished member here), and it didn't work.
So I wanted to understand why this was happening, and was told that my Tilt couldn't have any other dialer than the default one (since I'm with the standard ROM, and I need a localized skin).
nikagl said:
Don't know about localizing. Regarding whether it's the WM5 or WM6 dialer, what's the difference? When I look at the screen it looks exactly the same as the dialer on my Kaiser (WM6) when I turn of the HTC dialer (using the reg-tweak or KaiserTweak).
Regards,
Nika.
Click to expand...
Click to collapse
its because you have a tilt as well.
original microsoft wm6 dialer:
original microsoft wm5 dialer:
HTC dilaer:
Does anyone know how to switch from the HTC dialer to the standard WM6 one?
The HTC dialer does not have soft 'Talk' and 'End' buttons, which I find very annoying...
What do you mean?
elivne said:
its because you have a tilt as well.
Click to expand...
Click to collapse
And I second the question regarding the ability to switch between the dialers.
Blacksheep said:
Does anyone know how to switch from the HTC dialer to the standard WM6 one?
The HTC dialer does not have soft 'Talk' and 'End' buttons, which I find very annoying...
Click to expand...
Click to collapse
Download KaiserTweak, copy KaiserTweak to your machine, Download the latest XML, copy that to your machine too, and use KaiserTweak to switch between the dialers...
Regards,
Nika.
elivne said:
its because you have a tilt as well.
original microsoft wm6 dialer:
original microsoft wm5 dialer:
HTC dilaer:
Click to expand...
Click to collapse
How can i change to HTC dilaer??? As on the second picture???
ze bediuk ma she shaalti oto...
That's the question...
As I replayed before:
I suggest the following:
1. find a full install of the dialer(I don't know of any).
2. change your rom to an HTC rom(much better! ))
3. find an answer at XDA....
wisniak, I replayed your question on ppcfreak.
Quickest way to the Dialer
This may be a silly question, but without opening the keyboard, what is the quickest way to get the dialer to appear on the screen?
emmit said:
This may be a silly question, but without opening the keyboard, what is the quickest way to get the dialer to appear on the screen?
Click to expand...
Click to collapse
Try Pressing the Green Call button on your device, that should bring up the dialer.
To change to the default WM6 dialer, which is actually listed above as the 2nd HTC dialer. Here is the registry key that needs changed:
HKEY_LOCAL_MACHINE / Security / Phone / Skin
Change the value of 'Enabled' from 1 to 0
Please note, that there is no video calling available using this dialer.
Just thought I would clarify a little bit on what these dialers actually are:
At&t WM6 Dialer:
HTC Touch style dialer:
Default Microsoft WM6 dialer:
Default Microsoft WM5 dialer:
I used Kaiser Tweak and the dialer definitely looks different now
I'll post an image later today.
njmarchetti said:
Just thought I would clarify a little bit on what these dialers actually are:
At&t WM6 Dialer:
Default Microsoft WM6 dialer:
Click to expand...
Click to collapse
Dude, you are absolutely wrong,
The first is the built in WM6 dialer, available on every WM6 phone edition (you can unhide it with a tweak manager) - all WM^ phone editions have it(never mind the colors)
The secound is the "smartdialing" HTC dialer - available only on HTC phone editions devices,(never mind the colors)
Here's what it looks now:
This is the dialer skin I have after using the Kaiser Tweak.
EZDIAL does not come up, even though it's properly installed.
Is it possible for someone to extract the SMS program from WM6.1 into a cab that can be used on WM6?
aad4321 said:
well how come you choose wm6 over 6.1?
Click to expand...
Click to collapse
I already have WM6 installed and would just like to take advantage of the threaded SMS. That is ... if this is even possible.
I am also wondering this. Thanks.
Not looking good ...
Downloaded skype Cab from Skype site with Diamond, installed and it does not work.
any solution?
Thanks!
Any chance you tried google or the search function in this forum...
There already is a skype thread... -.-
Skype does not work on any WM6.1 device right now. No workaround available if you do not want to rely on thrid-party software
Jorlin said:
Any chance you tried google or the search function in this forum...
There already is a skype thread... -.-
Skype does not work on any WM6.1 device right now. No workaround available if you do not want to rely on thrid-party software
Click to expand...
Click to collapse
Sorry, but skype works on eten m600+ w/ wm6.1 rom.
But the skype need to be the one provided by eten, that is skype design for m600+
I have tried this on diamond but crash result
Jorlin said:
Any chance you tried google or the search function in this forum...
There already is a skype thread... -.-
Skype does not work on any WM6.1 device right now. No workaround available if you do not want to rely on thrid-party software
Click to expand...
Click to collapse
Skype works on my HTC P3600 with 6.1
but
It does not work on my Diamond HTC P3700
There is a shell error...
Working Skype
Hi,
I have skype working on HTC diamond and PDAVIET Diamond rom.