Related
Hi guys,
I have updated my Qtek 9090 to WM5. But I found an annoying problem, every time when I plug out the battery, for example to change the SIM card, the date information will lose and I must set it again when I turn it on.
Does anybody have good idea to solve this small problem?
BR,
Peter
rocqip said:
Hi guys,
I have updated my Qtek 9090 to WM5. But I found an annoying problem, every time when I plug out the battery, for example to change the SIM card, the date information will lose and I must set it again when I turn it on.
Does anybody have good idea to solve this small problem?
BR,
Peter
Click to expand...
Click to collapse
What is the status of your backup battery.
Is it fully charged before AND after you change the battery.
If after changing the main battery the system reports the backup battery to be discharged, maybe your backup battery is died?
Mine does the same thing. I think our back up batteries are dead. How does one replace the battery?
the date and time gets erased every time i change batteries. quickest way to get the time/date right is to connect the xda2s to the computer via activesync (or manually correct it)
I have checked the status of the backup battery from WM5 battery information, it is 100% full. Is this information believable or not? If not, does anybody know how to change the backup battery?
rocqip said:
I have checked the status of the backup battery from WM5 battery information, it is 100% full. Is this information believable or not? If not, does anybody know how to change the backup battery?
Click to expand...
Click to collapse
What % is the backup battery after you change your main battery.
Thats the key, if it says it is flat after change then your backup battery is not holding charge.
To change it I believe would entail opening your pda case and removing the old battery & installing a new battery of the same type/rate.
Don't know if they are soldered or clipped in, someone with more knowledge may shed some light.
i use the ms activesync to synchronize the date
i have the same problem.. even if i poke the soft reset button, time and date reverts to default.. september 1, 2004..
i can assure that my back up battery still works.. it loses charge and drains (my ramdisk gets wiped out) for about 30 minutes without the main batt..
I'm having the same problem as well.
Anyone found a solution to this yet?
EDITED:
I'm using Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2
And I've confirmed this problem doesn't occur when using WM2003SE.
wuzy said:
I'm having the same problem as well.
Anyone found a solution to this yet?
EDITED:
I'm using Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2
And I've confirmed this problem doesn't occur when using WM2003SE.
Click to expand...
Click to collapse
I have no problem with that, and i am using the same rom as you.
When i remove teh battery, first i lock the device, and turn it off, making the screen all black. now i remove it, and in less than 20 secs i swap cards.
No mem loss.
When you mean by "turning it off", you meant pressing the power button and it goes to suspend mode right?
Cuz on my Dell X51v there's a function to perform a full poweroff which I can't find in this ROM.
anyone tried to remove the battery the moment just after choosing a soft reset?
1. choose soft reset
2. then when the four colored lines come out, take out the battery
3. insert new battery
4. turn on the power
5. just in case the R and G values display "NONE", just choose soft reset again
i think it's a good alternative to keep the date/time after changing batteries... i just don't know the harmful ramifications in doing so, if any...
wuzy said:
When you mean by "turning it off", you meant pressing the power button and it goes to suspend mode right?
Click to expand...
Click to collapse
Of course.
Ok, this is strange.
I accidentally moved the battery latch when the screen was on, the battery fell out and the screen faded out quickly. But when I put the battery back in and reboot the device, all settings including date & time were still there!
So I tried the same method when swapping to my other battery and it worked as well! w00tz!
Done it a few times now with 100% success so far.
Drifter
I use Drifter by Kopsis when I'm in wi-fi range. Drifter uses Network Time Protocol (NTP) to set the time. Thus you can set the time even without syncing to your computer.
I'm using AKU 3.5.2 with the BuildOS on default settings and i can change my battery just fine.
now i'm use wm6.5 explode..but i have something trouble in my blueangel.
why my phone signal always loss(no signal/low signal) when my power under 60%..
or i need upgrade RADIO??
thx, sory my vocabulary too bad. i'm in Indonesian..
BlueAngel (o2 XDA IIs)
ROM 6.50.21.WWE
Radio Version 1.12
.
There can be 2 reasons:
-radio isn't good - try 1.15?
- your battery is too weak...
I have weak battery, and if i have only 50% battery power left, than I can not connect to gprs...
But try changing radio first
Hi,
I think thats because your battery has dropped or leaked, same as me.
When the indicator reached about 50%, my BA restarted. When I use camera to take photos, connect to GPRS, activate wifi, it will shut down automatically (screen turn off, need to restart the BA).
So go get a new replacement battery or you can try to modified your battery as discussed and posted in this forum
I'm sorry. (bad English)
I have a serious problem with my trinity.
My battery drain faster like a jet coster.. when phone mode is ON (only 3 hours standby mode).
But if Phone mode set to OFF, my trinity can live until 3~4 days on minimal mode.
I change my ROM (wm.5, wm6, wm6.1 or wm6.5) and also change my radio from 1.35 to 1.38, 1.46.00.11, 1.46.30.11, 1.50 and 1.56. but had a same problem.
I think my battery broken, but after bought some battery ( original htc p3600 1500mAh and extended battery 2400mAH ), still had a same problem.
On 1500mAH my phone ran only 5 hours on standby mode, and 7/8 hours if I use 2400mAH. I had change with other SIM card & other operator too but still had same problem too.
I think my phone have a problem with radio hardware.
Help me please...
What Should I do now....
Please Help me....
Anyone tell me what should I do to solve my Trinity problem?
Hi there!
I recently changed my battery with an ORIGINAL new one because I had a problem... that is still here...
Every time I turn on wifi (even with 100% of battery) my phone turns off after 2 or 3 minutes (and it seems that's because of the battery.)
Sometimes it turns off even when I'm just calling (more often when the battery is less then 20-30%).
EDITED: 30-40 seconds before it turns off the screen and the physical keyboard backlight start to flicker.
EDITED: Now it turns off EVERY time I make or receive a call after 4-5 minutes!
Exemple: Today the battery life was around 50%. I tried to turn on wifi. After 2 minutes of wifi use it turned off. I tried to turn it on but there was the flashing red led and it turned off again every time (it was like uncharged ).
Then I tried to remove the battery for a few hours, I put it back in and the battery life was the same of before the "turning off" problem, around 50%. What does it mean??
My hypothesis is that it gets excessively hot when I use wifi and even when I call... But I don't really know what that's about..
[my ROM is this: http://forum.xda-developers.com/showthread.php?t=586463, the english version. I got the right RADIO, I checked yesterday]
Thanks for any suggestion!!
Fabrizio
[sorry 4 bad English]
Try this...
Check the battery contacts on the phone -- clean them with a little isopropyl alcohol, and gently pry them up a little so they make solid contact with the battery.
I'll try what you say, thanks a lot!
I just want to say (I forgot it in the first post) that the screen and even the physical keyboard backlight start to flicker 30-40 seconds before the kaiser turns off.
After prying and cleaning the battery contacts the problem isn't solved yet. I didn't use the isopropyl alcohol, I'll try it asap.
Anyway now the problem is even worse, the kaiser shuts down each call after 2 or 3 minutes! Of course if the phone is charging (via usb) NO PROBEL, even the flickering isn't there any more...
Any other possibility of fixing that? (I have no warrantee, I really hope I fix that by my self just with your help!)
btry prob
well.. find out if one of ur friends has kaiser..... exchange batteries... i.e u isert his btry into ur kaiser and ur btry in his kaiser and then try the wifi n calls from both fones..... this will precisely tel u whether it a fault in the fon or u didnt get The genuine btry.... hope this helps.... do leme knw.....
Thanks for replying but I'm using a brand new battery and the problem is still the same of the old battery, nothing changed...
perhaps the problem is really not the battery but rather the battery's charging.
the point of exchanging your battery with a friend's battery is that you will be able to test your device with a known properly charged battery.
alternatively, you can try to charge your existing battery with an external battery charging pack or by inserting your battery in a friend's phone and let it charge there.
i understand that you claim your battery is brand new, and this is leading you to conclude that it can NOT be the battery at fault...but strange things happen in this strange world!
Wow I didn't see this problem from that point of view!
The only person I know that has a Kaiser is 600km far from me...
Now I have to find a way to properly charge my battery (if it isn't already properly charged of course!)...
But just one question: if the Kaiser is not charging good the battery, why should it "think" that it's 100% charged??
welllll.... trust me..... i once had a sony ericsson k770i. the shopkeeper said that it has ORIGINAL btry.... n it wud turn off after 20 min talk. so my advise is try another btry from another shop.....
But I tried with 2 different batteries, my old one and a new one and the problem is the same. I also have to say that it's always worse then before. Now even if I turn on the camera after some minutes it turns off, ora yesterday even when I was writing a text message.
Indeed it's possible that the battery is always less charged because the Kaiser doesn't charge it. The Kaiser works good when connected with usb to may mac...
well buddy, ur last post clearly suggests a prob with btry.... say hw much had u used ur old btry before changing it
I used a battery for around one year, but it was already used (I've bought a used Kaiser, in very good conditions, on eBay).
The problem I have started with the old battery and now it keeps torturing me with the new one... Today I had my phone charged, but after 4-5 hours without using it I received a call and of course it turned off (after the flickering screen) I'm desperate...
o boy... its 200% confirmed btry prob. i m guessing, if u wud talk with charger or data cable plugged in, it wud work for hours ryt? my sincere advice is, go to a trustworthy shop n get a new battery. i m also using a new btry but it gives really gud tym on wifi, wap n calls....
Well I really think the battery I've just bought is a brand new original Battery, I checked all codes, voltage and other stuff... BTW I think I'll try to use another orignal battery (I'm sure that's original) of a friend of mine's Kaiser before I buy a new one. Here in Italy battery and gadgets prices are really high... Thanks 4 the help anyway!
PS: I really hope it's a battery problem, because if it's something else I don't really know what to do.... thanks again!
Update: I noticed that if I don't use Camera, Wifi or even make calls at all, my kaiser works for 2-3 days with no problem. I send lots of text messages, play Solitaire or view my photo album for example...
Why just more "intensive" tasks should make my phone turn off in 2-3 minute?
I don't really understand... I hope I'll find someone in my town that can fix it... BTW thank for any help
Hi guys!
Sorry for my english !
I have a very annoying issue with my phone. When I charge my phone to 100%,and i use it,at 40-50% ~ it's always drop me to 0% in some seconds. I checked the HTC help centre app,and after the battery test it showed 95%. (I think it's great). The problem is starting after i'm on 40-50%. What's the wrong with my device? I tried a lot of rom,but don't work :/
Thanks!