Database Develop

Problems with ActiveSync and wm 6

Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.

Everything is fine for me, are you sure that you flash the rom correctly as ordered ?

Sync problem
often can`t detect pda synchronitation . it`s show sync problem . Any way to fix it ?

I told you I don't have any problem which mentioned may be you have to reflash your rom, and start from the beginning.
Or first, you can delete your pairing connection with the pc, reinstall your active sync. And try to pair again. If you said "often", I hope this is not because of your hardware problem.

make sure your device is powered on ( the back light is on)..i also get it some time (only if i shut it by pressing Power Button at top)

Himalaya's USB Port is allergic to hubs
Don't try to use an USB Hub to connect the Himalaya to your PC. Always use a direct connection. This solved the problem for me.

...
Hi,
urbstar said:
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Click to expand...
Click to collapse
Got exactly the same problem, since upgraded to WM6 (Tofclock Fresh ROM) Activesync never finds the PDA. Tried really everything possible, doesn't work. But 'cause there are some beautiful tools like WM5Storage or PIMBackup I don't care about ActiveSync.
May be its - as mentioned here - the USB Connection over USB Hub. But it's an internal one in my case so I can't proof.
And I don't think that the workaround for this problem is a ROM-ReFlash 'cause everything else works fine.
So long
HonkBB

i have same sync problem
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
i have reflashed 4 times now and still no good.
any ideas???

newquaymarc said:
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
Click to expand...
Click to collapse
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...

stupiddog said:
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
Click to expand...
Click to collapse
cheer for reply but no cradle connected direct to my laptop
gonna have to go back to 2003 se till i hear of solution
shame xda runs great with wm6

I just want to ask you about active sync which version did you use ?

selangkahlagi said:
I just want to ask you about active sync which version did you use ?
Click to expand...
Click to collapse
thanks for replying
im using active sync 4.5 with xp pro all has been ok till this upgrade

I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck

selangkahlagi said:
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
Click to expand...
Click to collapse
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on

newquaymarc said:
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
Click to expand...
Click to collapse
If you had old splash screen, big possibility you didn't do the last step

selangkahlagi said:
If you had old splash screen, big possibility you didn't do the last step
Click to expand...
Click to collapse
i did do it but dont think it ran correct, is it ment to run on 2003 se?

newquaymarc said:
i did do it but dont think it ran correct, is it ment to run on 2003 se?
Click to expand...
Click to collapse
did you do this step
hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.

hi
yep done all that, NO-YES-YES i think the prep work before upgrade did'nt work..
maybe i need to goto wm5 then wm6, but wm5 was too slow for me to use.

a lot of laptops actually have one set of usb ports that are registered as a powered hub and often these don't really have enough power across all the ports... jst an idea...

active-sink!!!!!!!
hi all xperts,
lemme start with my Thanx to Tof the great and Helmi who have made this possible for the good ol' Hima..
Now i need some help -
I installed this package close to a month back with all instructions point by point.
Activesync was the problem..
Today i thot i'll increase the storage space - ran the unlock and then realised the Hima Doc tool is a exe file and i'll hv to have a valid activesync connection before i can get that worked.
Then i thot, i'll reload WM6.0
Again, started in Boot loader - Got the Serial Screen with v1.06 in bottom, connected my device to run the software -
I'm redoing the flash now - wish me luck guyz!!!!!!!!!!

Big Problem?

I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.

Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.

Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)

That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.

Im not a expert but is vista the problem??

Most likely.

Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated

mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.

thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie

mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....

Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??

Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try

diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!

usb device not recognized

Hello everyone. I have the kaiser from 3 months. I didn't use it the last month and when I plugged to the pc usb it show me some crazy stuff. My baterry was empty when i first turn it on now, but it gest charged with the pc usb.
I am using l26 v8 light ROM - http://forum.xda-developers.com/showthread.php?t=400118:
R 1.58.25.17
G 25.69.30.05H
D 3.28.00.00
The hard-spl is v3.29 .
When i first get it now, what I did first was to format the SDHC 4gb card cause i saw a new version of the leo's rom. Then I turn the Kaiser on and saw the empty battery. I did 3-4 hard resets, preinstall my windows, preinstall m$ activesync 4.5, tried on another pc but still the same. I don't put any sim card to it. Still nothing, any help ?

Hard reset :$
This was only option for me.
Or try other usb port, or on other deviece.

sorry to ask this but did ur mini usb cable is in good condition ?
have u tried to flash ur stock rom & try to connect with ur PC?

my mini usb is in good condition. i have 3 and tried them all.
I haven't tried to flash my stock rom for 2 reasons- i don't know where to get it from and secondly how could i flash it without usb connection ? Error 260 then i try any ruu.exe files ;(
edit: i have some soft on my sdhc which i formatted first and then turn on the phone from a month with an empty battery- could that cause something ?

hang.tuah said:
sorry to ask this but did ur mini usb cable is in good condition ?
have u tried to flash ur stock rom & try to connect with ur PC?
Click to expand...
Click to collapse
Try what Hang sad, and check in Activesync if USB conections are alowed if u can try another usb cord. Wich Windows do u use?

of course u can use ur SD to flash ur rom. card reader will help. for more info maybe u can read the wiki there were many stock rom available for download.

@theclear tried it with 3 different mini usb cables, on 2 PC,on the first pc I preinstalled the windows xp. All PCs are running winXP.
@hang.tuah my kaiser is from orange UK, which rom do you advice me to flash from ???

and another question, when i put a stock rom would i again install the hardspl and the other stuff or once they are installed there is no reason to do that ?

So flashed a new rom - [June 25] L26_KaiserDiamond_V9 (new source!) and again it still the same problem ;( What if I flashed another ROM ? Not a stock rom but another ?

1.71.09.01 install this rom now and it is still the same ;(

i would try to connect it to another pc to make sure that some paranoid 3th party program you installed dident decide to black devices trying to connect using usb

Rudegar said:
i would try to connect it to another pc to make sure that some paranoid 3th party program you installed dident decide to black devices trying to connect using usb
Click to expand...
Click to collapse
this is the second pc that i try to connect it, with the first pc i preinstalled windows and still nothing ;(
edit: now installed an orange rom win wm6.0 still the same problem ;(

people, now find this post http://forum.xda-developers.com/showpost.php?p=2358041&postcount=43
looked mine and the pin is not in its place. may be that is the cause. mine problem is the same - the second pin -how possibly i could pick it up alive :S

OOOK finally how it work with a knife modifying The black thing of the usb was able to pul it down and get the thing up again. 10x vary much !!! !!!

No ActiveSync connection, but still charging??

Hello,
i have a big problem and i dont know how to solve it.
1) I flashed the OliNex 1.56 using the HSPL method.
2) Flashed Xnor 1.4 Rom
3) Flashed LIA 14.5 Rom
4) Flashed a stock Rom(O2 6.1 Radio 1.12)
5) Flashed back to LIA 14.5(Installed Radio 1.14 and Rillphone 1.14)
6) Want to flash to L3.5, but no connection any more and stll charging over the usb cable
7) Hard reset, nothing changed
Yesterday the connection to activesync was available, but today the phone still charging but the connection to active sync is lost.
I set the phone to bootloader to flash a other rom, but the phone does not detect the usb connection (no usb at the bottom).
Hope you know what to do...
Thx

Try to reset/reboot your pc. I have the same problem from time to time. I'm using Vista and WMDC.

ClydeB1 said:
Try to reset/reboot your pc. I have the same problem from time to time. I'm using Vista and WMDC.
Click to expand...
Click to collapse
I also reseted/rebooted the pc (on the work) nothing happens.(winxp)
Now i am at home and it works with win7???
I dont understand that.
Thanks for advice
Greetz
/can close

PaschaD said:
I also reseted/rebooted the pc (on the work) nothing happens.(winxp)
Now i am at home and it works with win7???
I dont understand that.
Thanks for advice
Greetz
/can close
Click to expand...
Click to collapse
Remove and reinstall activesync on your xp pc. You can also try to remove all known devices in AS first.

kwbr said:
Remove and reinstall activesync on your xp pc. You can also try to remove all known devices in AS first.
Click to expand...
Click to collapse
Also tried, still the same...

Need Help.. Phone not connecting.

My m1000 is able to sync but when i put it in boot loader it dont show USB instead of serial. Even the device manger does not show any phone device. So any help anyone?

Hi,
did you try with another usb cable or another cradle ?

Are you using Windows XP or any newer?

I hv tried three cradles and also XP, Vista and W7.And diffrent computers too. but no luck.

The contacts might have decided to not work in bootloader.
??????????????????
flyboy

Did you install activesync 4.5?

aeroflyluby said:
Did you install activesync 4.5?
Click to expand...
Click to collapse
plz read the question carefully.i m able to sync.

krishan2207 said:
plz read the question carefully.i m able to sync.
Click to expand...
Click to collapse
I guess, you use a USB-crandle, not a serial one. You might have a damaged bootloader !?!

muckelmaus said:
I guess, you use a USB-crandle, not a serial one. You might have a damaged bootloader !?!
Click to expand...
Click to collapse
i hv usb one.

take SD Card out and try again!