Database Develop

PLZ upload Clockdll.dll in \windows directory

please can every one upload me the miss file from tof-clock rom
\WINDOWS\Clockdll.dll
I WAS DELETE IT
THANKS
THE PROBLEM IS SOLVED
THANKS TO EVERY ONE HERE

abdelamine said:
please can every one upload me the miss file
\WINDOWS\CLOCKDLL
I WAS DELETE IT
Click to expand...
Click to collapse
Where did you erased it from? ROM? Or kitchen...
Here's the kitchen version...

reply
not from kitchen i was delete it from the original tof-clock rom

abdelamine said:
not from kitchen i was delete it from the original tof-clock rom
Click to expand...
Click to collapse
From your DEVICE?? Or from a dumped ROM... (no matter you call a kitchen or not... it's always a kitchen of some sort).
If from your device... how did you do that?

it cant be uploaded as it is a system file..it cant be copied to the pc or card

reply
the file is located in your device \windows\clockdll.dll
use resco explorer or total comander to copy it and than upload it
thx in advance

okz.will try as soon i flash my device again..i was havin g prblems wid Tofclock ROM..cdnt charge via USB

Ive tried using CE COmmander..but no avail..it cant be copied.y dnt u use the kitchen version ..it has to be the same

First of all - it's impossible to delete it. Probably you've hide it... Just do a hard reset and it should be back

utak3r said:
First of all - it's impossible to delete it. Probably you've hide it... Just do a hard reset and it should be back
Click to expand...
Click to collapse
but if you have any unsaved data, please backup first
BTW it is not likely that any file on your device is responsible for your USB charging problem, check cable and connector

Maggy said:
BTW it is not likely that any file on your device is responsible for your USB charging problem, check cable and connector
Click to expand...
Click to collapse
Exactly. As I said earlier, probably your USB port in your PC has too low currency, thus not being able to charge your device.
Can you synchronize your device with this cable? And... are you using the same cable, while charging from a wall?

Yes I can sync sucessfully wid the usb cable..my wall charger is blasted ..i only charge with USB..

ather90 said:
Yes I can sync sucessfully wid the usb cable..my wall charger is blasted ..i only charge with USB..
Click to expand...
Click to collapse
OK, try in another PC. We'll see...

Problems with ActiveSync and wm 6

Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.

Everything is fine for me, are you sure that you flash the rom correctly as ordered ?

Sync problem
often can`t detect pda synchronitation . it`s show sync problem . Any way to fix it ?

I told you I don't have any problem which mentioned may be you have to reflash your rom, and start from the beginning.
Or first, you can delete your pairing connection with the pc, reinstall your active sync. And try to pair again. If you said "often", I hope this is not because of your hardware problem.

make sure your device is powered on ( the back light is on)..i also get it some time (only if i shut it by pressing Power Button at top)

Himalaya's USB Port is allergic to hubs
Don't try to use an USB Hub to connect the Himalaya to your PC. Always use a direct connection. This solved the problem for me.

...
Hi,
urbstar said:
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Click to expand...
Click to collapse
Got exactly the same problem, since upgraded to WM6 (Tofclock Fresh ROM) Activesync never finds the PDA. Tried really everything possible, doesn't work. But 'cause there are some beautiful tools like WM5Storage or PIMBackup I don't care about ActiveSync.
May be its - as mentioned here - the USB Connection over USB Hub. But it's an internal one in my case so I can't proof.
And I don't think that the workaround for this problem is a ROM-ReFlash 'cause everything else works fine.
So long
HonkBB

i have same sync problem
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
i have reflashed 4 times now and still no good.
any ideas???

newquaymarc said:
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
Click to expand...
Click to collapse
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...

stupiddog said:
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
Click to expand...
Click to collapse
cheer for reply but no cradle connected direct to my laptop
gonna have to go back to 2003 se till i hear of solution
shame xda runs great with wm6

I just want to ask you about active sync which version did you use ?

selangkahlagi said:
I just want to ask you about active sync which version did you use ?
Click to expand...
Click to collapse
thanks for replying
im using active sync 4.5 with xp pro all has been ok till this upgrade

I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck

selangkahlagi said:
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
Click to expand...
Click to collapse
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on

newquaymarc said:
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
Click to expand...
Click to collapse
If you had old splash screen, big possibility you didn't do the last step

selangkahlagi said:
If you had old splash screen, big possibility you didn't do the last step
Click to expand...
Click to collapse
i did do it but dont think it ran correct, is it ment to run on 2003 se?

newquaymarc said:
i did do it but dont think it ran correct, is it ment to run on 2003 se?
Click to expand...
Click to collapse
did you do this step
hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.

hi
yep done all that, NO-YES-YES i think the prep work before upgrade did'nt work..
maybe i need to goto wm5 then wm6, but wm5 was too slow for me to use.

a lot of laptops actually have one set of usb ports that are registered as a powered hub and often these don't really have enough power across all the ports... jst an idea...

active-sink!!!!!!!
hi all xperts,
lemme start with my Thanx to Tof the great and Helmi who have made this possible for the good ol' Hima..
Now i need some help -
I installed this package close to a month back with all instructions point by point.
Activesync was the problem..
Today i thot i'll increase the storage space - ran the unlock and then realised the Hima Doc tool is a exe file and i'll hv to have a valid activesync connection before i can get that worked.
Then i thot, i'll reload WM6.0
Again, started in Boot loader - Got the Serial Screen with v1.06 in bottom, connected my device to run the software -
I'm redoing the flash now - wish me luck guyz!!!!!!!!!!

Back to WM2003 question

Hi all,
Some days ago, i was to install TOFCLOCK HIMA WM6. But my i-mate Pocked PC works very slow.
Then try to back to WM2003, but here i has a problem - in the "serial" mode my desctop PC (Windows XP) dont see PockedPC. Same problem i has also with notebook (Windows XP).
Then I restart my PPC and when WM6 starded i seed that synchronization process work fine.
Don't understand, if synchronization worked why desktop PC can't see PPC in the SERIAL mode?
pls help me!

U have to put it in BOOTLOADER MODE..follow the instructions carefully

ather90 said:
U have to put it in BOOTLOADER MODE..follow the instructions carefully
Click to expand...
Click to collapse
Yes, i'm in bootloader mode (RECORD+POWER+ACTION+RESET) and then see text on display "SERIAL".
Maybe WM6 lock USB connection?
Intrested that if i load WM6 as normally - synchronization via USB work fine.

do u see USB at top...Connect cable directly to PC

Why dun you try loading other version of WM6? Maybe it is not as bad as what you think to make you go back to 2003?

yes, i would suggest you to try C_Shekhar's *Fast* WM6 AKU7.0c.R40.P24 at:
http://forum.xda-developers.com/showthread.php?t=332945

Lolz..he wants to switch back to WM2003..not to another installition of WM6

if his device dont show usb when connected he cant flash any rom
personaly i would try another usb port
maybe another pc if need be

ather90 said:
do u see USB at top...Connect cable directly to PC
Click to expand...
Click to collapse
at top? i use standart USB cradle. And later, on XP i see USB device icon (in bootloader mode) near a clock. Just nothing

dark_wing said:
Why dun you try loading other version of WM6? Maybe it is not as bad as what you think to make you go back to 2003?
Click to expand...
Click to collapse
Speed... I use my device 2 year and time to time was flashing new OS (WM2003CE, WM5, WM6) published on this forum.
And I can say that all new WM is not bed. He is more beautifuly, but does not fasted than 2003.

ermoas said:
yes, i would suggest you to try C_Shekhar's *Fast* WM6 AKU7.0c.R40.P24 at:
http://forum.xda-developers.com/showthread.php?t=332945
Click to expand...
Click to collapse
I can't - have an error when try to reflashing
Windows XP can't see PPC...

Rudegar said:
if his device dont show usb when connected he cant flash any rom
personaly i would try another usb port
maybe another pc if need be
Click to expand...
Click to collapse
correct, but same usb port woks fine when WM6 loaded. And ActiveSync works correctly too.

my himalaya cradle had a horrible connector
½ the time the pc would not connect to it
wrigling it about a bit made the connection
so now i use my old walaby cradle it's better
i suspect your cradle is teh culpit too

Rudegar said:
my himalaya cradle had a horrible connector
½ the time the pc would not connect to it
wrigling it about a bit made the connection
so now i use my old walaby cradle it's better
i suspect your cradle is teh culpit too
Click to expand...
Click to collapse
Thanks.
Can i reflashing PPC from SD card?

Many have asked the Same question..but al;as..its possible but No one knows for sure how ??

ather90 said:
Many have asked the Same question..but al;as..its possible but No one knows for sure how ??
Click to expand...
Click to collapse
I guess some of the pioneers (itsme, buzz_lightyear, peter poelman and so on) should know. Buzz is still active on his own forum, haven't seen the others for quite a while. Perhaps dig deep in the wiki, dig up some very old threads, PM them...

yeah maybe..but some one also posted a topic regarding Flashing via SD card on buzzdev..but i dnt think he got the answer

Anyone knows where can i find the usb driver for my phone?

hi, i have a kaiser but i don't know how i can read my sd in usb mode, i installed w5torage but many peaple said me that my phone don't have a usb driver.
Solutions?
Thnaks.

Lilhit82 said:
hi, i have a kaiser but i don't know how i can read my sd in usb mode, i installed w5torage but many peaple said me that my phone don't have a usb driver.
Solutions?
Thnaks.
Click to expand...
Click to collapse
Try CardExport II (commercial)
Ta
Dave

but cardrxport it's no free program!!

Lilhit82 said:
but cardrxport it's no free program!!
Click to expand...
Click to collapse
There's a demo if you only need it once (or to test it works).
It's the only one I've had working.
Other than that your stuck with crappy active sync I think
Dave

ehehheheh...yes cardexport it's ok!! great
EDIT: but for curiosity, is there this driver online? for example a list of kaiser driver..

No ActiveSync connection, but still charging??

Hello,
i have a big problem and i dont know how to solve it.
1) I flashed the OliNex 1.56 using the HSPL method.
2) Flashed Xnor 1.4 Rom
3) Flashed LIA 14.5 Rom
4) Flashed a stock Rom(O2 6.1 Radio 1.12)
5) Flashed back to LIA 14.5(Installed Radio 1.14 and Rillphone 1.14)
6) Want to flash to L3.5, but no connection any more and stll charging over the usb cable
7) Hard reset, nothing changed
Yesterday the connection to activesync was available, but today the phone still charging but the connection to active sync is lost.
I set the phone to bootloader to flash a other rom, but the phone does not detect the usb connection (no usb at the bottom).
Hope you know what to do...
Thx

Try to reset/reboot your pc. I have the same problem from time to time. I'm using Vista and WMDC.

ClydeB1 said:
Try to reset/reboot your pc. I have the same problem from time to time. I'm using Vista and WMDC.
Click to expand...
Click to collapse
I also reseted/rebooted the pc (on the work) nothing happens.(winxp)
Now i am at home and it works with win7???
I dont understand that.
Thanks for advice
Greetz
/can close

PaschaD said:
I also reseted/rebooted the pc (on the work) nothing happens.(winxp)
Now i am at home and it works with win7???
I dont understand that.
Thanks for advice
Greetz
/can close
Click to expand...
Click to collapse
Remove and reinstall activesync on your xp pc. You can also try to remove all known devices in AS first.

kwbr said:
Remove and reinstall activesync on your xp pc. You can also try to remove all known devices in AS first.
Click to expand...
Click to collapse
Also tried, still the same...