I am using dutty's no.6 with touchflo on my tilt. It has the keyboard fix already as I understand it yet the ! and @ fn keys are switched. so I tried the keyboard fix install and they were still switched. Not that I can't live with it, but isn't there some easy way to just reg hack a fix on this?
Strange thing is:
I have UNinstalled the Tilt keyboard Fix and restarted (!!) the Kaiser. Then the keyboard mappings are correct, where WITH the keuborad fix they were mixed up...!
Tilt Keyboard fix
This fixed it for me.
Guys, remember to do a soft reset after installing the cab file on your kaiser.
I forgot to reset and it didn't work for me.
yep, i have to agree after installing the fix and soft reset, good to go.. thanks!!
Related
Hello
i think i posted this in various locations already.but i really need this fixed cuz it's driving me crazy
and i need the help of all u gurus
basically after i installed Dutty's Final rom2, the keyboard letters are screwed up in the phonepad screen
i was told to install the keyboard fix for the TILT and ya it DID work,
the phone pad screen is working, but the thing is, the function keys aren't working... they're all misplaced and jumbled up.
i been lookin for methods to fix this and until now, no cure
i played with the registry, the KEYBD code and all that, nothing work
PLEASE GURUS
help me out, or teach me
thansk
What country are you from? I have a Tilt, from USA, with a non-ATT ROM. I had the same issue you describe but as soon as I applied the TaurusBulba Keyboard Fix my keyboard was working appropriately.
UK
ya i used that already.
like i said, it did fix the keyboard in the phonepad
but it screwed up the function keys
i tried to set the keyboard layout in registry to the UK setting
still no change
Has anyone else had the following problem? I've installed alternate keyboards (HTC, Pocket CM .12, TouchPal) and none of them seem to work. They show up in my drop down, but when I select them the Tilt will still use the default keyboard. I even tried changing it using the input selection under settings to no avail. All of the screen writing selections work fine.
Any suggestions?
try a soft reset if you haven't. or try installing to main memory
Tried multiple soft resets, reinstalling all of the above and placing in main memory.
nkawtg said:
Tried multiple soft resets, reinstalling all of the above and placing in main memory.
Click to expand...
Click to collapse
I am having the same problems. Anyone figure out a fix for this?
thanks!
Ive had the same problem... i just gave up and went on with the norm...
I've had the same problem before. I have several onscreen keyboards installed and sometimes I can't access most of them. They just go to the default onscreen keyboard. A soft reset typically fixes the problem. For a little while at least. Kinda weird.
SIP problem
the same here :/
--
hoot
maxh said:
I've had the same problem before. I have several onscreen keyboards installed and sometimes I can't access most of them. They just go to the default onscreen keyboard. A soft reset typically fixes the problem. For a little while at least. Kinda weird.
Click to expand...
Click to collapse
+1
exact same thing here with touchpal v1 and v2 as well as pocket CM keyboard, but any keyboard built into a rom seems to work fine all the time...
Got your answer
Google up IM Selector, install it to the main memory and change the SIP default in their dropdown menu. Softreset. Bam, whatever keyboard you use.
IM Selector doesn't work on my Device
I found the IM Selector on http://www.freewareppc.com/utilities/taptapkeyboard.shtml but it doesn't work on my XDA Orbit 2 (WM6). Maybe the HTC Touch Keyboard is the problem but I can't uninstall it.
Try sipchange
I installed a new IM (Calligrapher) and I experienced the same problem. My solution was to use the utility SIPchange and it worked fine for me.
You can find it here: http://www.pdagold.com/software/detail.asp?s=1312
Bug on my virtual phone keyboard and compact qwerty keyboard : impossible to type letters. Only numbers are displayed. My full qwerty keyboard works.
I had install and uninstall many keyboard like PCM, touchpal etc.
Thanks a lot !
Fafou
My case is worst then yours . All three HTC keyboards are numerics only. But the regular WM SIPs works fine.
Anyone got an answer to that?
Have you tried a different rom? might help...
disable the " Turn on one touch" option and it works again.
Got the same bug, and the only fix is to disable this option.
But you can do a soft reset and enable this option again and it should work normal again.
Havent figued out the reason of this bug yet, but i think it has something to do with editing the contacts.
btw, which hardspl version do you use?
slicker said:
Have you tried a different rom? might help...
Click to expand...
Click to collapse
I think its a bug on the 1.93 wwe roms, got it on every wwe rom except swifts 5.0. But 5.6 got this bug too.
I get the same problem if i have PCM player keyboard installed.
uninstalled it and a reboot fixes it... but i love PCM keyboard.
I'm on 1.37 Nor btw.
I'm using stock 1.93 ROM. full QWERTY was working for 2 week... till 2 days ago. I have reverse all the tweaks I made for the pass few days and it didn't help.
I think I'll try install a PCM trial and see if that helps.
Keyboard now working is a big issue. I hope HTC will publish a hotfix soon.
Installed PCM... all the HTC SIP still not functioning. But the hell with them... I like PCM better now.
Hope some one finds a fix. I want both PCM keyboard and the orignal ones.
Lobo13 said:
I have found a solution. Change this in the registry:
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409
"Layout Text"="eT9 IME"
"Ime File"="\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
"(Default)"="XT9"
[/quote]
Works after a reboot on diamond :)
Click to expand...
Click to collapse
When i want to write a new message or adding a contact name, i can only type numbers. On compact qwerty i can only type numbers. On full qwerty i can not switch to letters, i can only see the number pad, and i cant switch to letters, it stays on the numbers. The only working keybord is the full one.
Any chance to fix this?
Same problem,
Anybody with an answer or the original cab?
Diamond Keyboard CAB
Attached is the Diamond Keyboard CAB.
Includes a few languanges, large qwerty etc...
Probably you missed the attachment?
Regards,
Carty..
i had same problem and what i did is reflash rom and now everything works perfect
Post is old, problem allready fixed!!!
I have this problem too but with the official HTC Rom 1.93.
After a hard reset it works fine few days and then, i got that bug and need to hard reset again to get it working back ... It's very annoying :/
Do i just need to install that keyboard package to fix it ?
skrap3 said:
Post is old, problem allready fixed!!!
Click to expand...
Click to collapse
tell me how!!!!!!!!!!!!!!!
I did a hard reset and then a regestry export of HKLM\Software\Htc\ezsip
and HKLM\Software\tegic
then did a backup-restore and changed the registry.
I've gone through multiple Roms, different versions of hyperdragon III, and different versions of PDAcorner. When I try to select a different keyboard, it loads for a second, then goes back to the default. The only keyboards that work are other defaults, such as Block Recognizer, Letter Recognizer, and Symbol Pad.
SOMETIMES PCM keyboard works, but NEVER has any of the diamond keyboards every worked.
I've even tried SIPchange, but the same thing happens. I assume the same has happened to you guys too? did you ever fix it?
thanks!
Is it just me?
How many of you use the Diamond Keyboard, or keyboard other than the default?
default IM
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
The default cab is the ticket...it works when everything else fails. I don't even bother with the other stuff now. If the sip won't stick, I just install that cab and select it. A soft reset later and you are good to go.
Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
I'm not sure what you mean by default im cab for wm5... lol
mikeeey said:
I'm not sure what you mean by default im cab for wm5... lol
Click to expand...
Click to collapse
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
parleyp said:
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
Click to expand...
Click to collapse
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
default im selector instructions
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
.
edit:
sipchange and imSelector did nothing... could someone kindly link me to the 2 keyboards? lol
thanks.
.
edit: (5 seconds later)
PCMkeyboard just quit working again...
Click to expand...
Click to collapse
1. install the default im wm5 cab above
2. install the opal keyboard you want
3. start > programs > im selector > opal keyboard
4. start > settings > personal > input > opal keyboard
5. soft reset
-----
you may need 2 soft reset twice before it cooperates. if you have your phone password protected, the default keyboard you selected will never show until AFTER you enter the password.
only RARELY do i get a glitch now, and a reset usually fixes the problem.
let us know!
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
Click to expand...
Click to collapse
I am in the same boat as you and the only keyboard that I have gotten to work is resco keyboard.....I have same exact problems as you...did you ask SJ about it....
SJ's opal keyboard
im having problems attaching files, but SJ's keyboards can be found here.
apply the default im instructions and a couple of soft resets later, you should be good 2 go.
I played with a Samsung Omnia yesterday, I really liked the keyboard SIP, is it possible to download and get to work on our kaiser's.
not sure...