Can someone please make a keyboard fix for the XDA stellar? - Tilt, TyTN II, MDA Vario III General

Hello
i think i posted this in various locations already.but i really need this fixed cuz it's driving me crazy
and i need the help of all u gurus
basically after i installed Dutty's Final rom2, the keyboard letters are screwed up in the phonepad screen
i was told to install the keyboard fix for the TILT and ya it DID work,
the phone pad screen is working, but the thing is, the function keys aren't working... they're all misplaced and jumbled up.
i been lookin for methods to fix this and until now, no cure
i played with the registry, the KEYBD code and all that, nothing work
PLEASE GURUS
help me out, or teach me
thansk

What country are you from? I have a Tilt, from USA, with a non-ATT ROM. I had the same issue you describe but as soon as I applied the TaurusBulba Keyboard Fix my keyboard was working appropriately.

UK
ya i used that already.
like i said, it did fix the keyboard in the phonepad
but it screwed up the function keys
i tried to set the keyboard layout in registry to the UK setting
still no change

Related

Keyboard config for AT&T ROM on HTC-branded Kaiser

Anyone know how to switch the keyboard configuration? This is very much the same problem as many TyTN users experienced when installing an operator ROM: my keyboard has symbols in the wrong place (e.g. ! and @ are reversed - I have an @ over the Q and a ! over the W).
The instructions posted in the Hermes wiki (http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems) and in various threads (like http://forum.xda-developers.com/showthread.php?t=283881) don't work, as the registry key ([HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]) doesn't exist. Maybe this is because it was written to help Cingular 8525 customers install HTC ROMs, which is the opposite thing I want to do. In fact I can't find the string "qwerty" in the registry at all. Creating the OEM\Qwerty key and populating the suggested value doesn't work.
Anyway if someone knows how to get the HTC symbol mapping back please let me know. Alternatively if anyone has the release version of the HTC Kaiser ROM, that would probably do the trick for me too.
M
I assume you've already tried this ROM?
Here is the cab fix for the 8525 keyboard being messed up. I'm attaching it below.. but I don't know if it just uses the same registry fix.
If the above Image isn't the latest release for the kaiser I wouldn't worry too much as people are starting to get the HTC RTM kaiser right now and I'm sure the official rom will be posted soon.
I've tried 'em all. Because they're AT&T ROMs they all have the AT&T Mappping. Why do carriers have to change the mappings of their keyboards at all?
thanks anyway.
I'm sure you've already found this solution...but was trying to find it myself and had to deduce it from reading how the forum people were able to do the reverse (assign AT&T layout to non-AT&T ROM).
Try this:
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout
Note that this works for correcting the keyboard layout problem when flashing a Rogers ROM on the HTC-branded kaiser
Rumball said:
I'm sure you've already found this solution...but was trying to find it myself and had to deduce it from reading how the forum people were able to do the reverse (assign AT&T layout to non-AT&T ROM).
Try this:
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout
Note that this works for correcting the keyboard layout problem when flashing a Rogers ROM on the HTC-branded kaiser
Click to expand...
Click to collapse
I think you ment THIS post
Still Nada here for this guy.
Tried,
Keyboard Fix WMXL 8525.cab
WM VI 8525 Keyboard Patch.CAB
Ive looked in my registry for the CWSLayout
Tried the reg edit for the qwerty key and the suggested edits were the values I already have.
Nada...
Ive got a Rogers Tytn that Ive upgraded using a ATT 8525rom
everything works great, other than the 8 symbol keys.
Any more suggestions?
theMopie
Rumball said:
I'm sure you've already found this solution...but was trying to find it myself and had to deduce it from reading how the forum people were able to do the reverse (assign AT&T layout to non-AT&T ROM).
Try this:
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout
Note that this works for correcting the keyboard layout problem when flashing a Rogers ROM on the HTC-branded kaiser
Click to expand...
Click to collapse
mlekas said:
Anyone know how to switch the keyboard configuration? This is very much the same problem as many TyTN users experienced when installing an operator ROM: my keyboard has symbols in the wrong place (e.g. ! and @ are reversed - I have an @ over the Q and a ! over the W).
The instructions posted in the Hermes wiki (http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems) and in various threads (like http://forum.xda-developers.com/showthread.php?t=283881) don't work, as the registry key ([HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]) doesn't exist. Maybe this is because it was written to help Cingular 8525 customers install HTC ROMs, which is the opposite thing I want to do. In fact I can't find the string "qwerty" in the registry at all. Creating the OEM\Qwerty key and populating the suggested value doesn't work.
Anyway if someone knows how to get the HTC symbol mapping back please let me know. Alternatively if anyone has the release version of the HTC Kaiser ROM, that would probably do the trick for me too.
M
Click to expand...
Click to collapse
I got the AT&T Tilt and i got the same problem. I tried all the suggestions here but all failed.
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout => There is not that key in the registry of my phone
Anyone can tell me how to fix it?
Thanks!
imbbn said:
I got the AT&T Tilt and i got the same problem. I tried all the suggestions here but all failed.
delete the registry key HKLM/HARDWARE/DEVICEMAP/KEYBD/CWSLayout => There is not that key in the registry of my phone
Anyone can tell me how to fix it?
Thanks!
Click to expand...
Click to collapse
Read the Kaiser Wiki -> Hacks and Tweaks -> Software section.

HTC Touch keyboard breaking autocorrect?

I'd like to use the HTC Touch keyboard on my Tilt for the times that I don't want to slide out the keyboard, but installing it seems to break the autocorrect feature when I am using the hardware keyboard. I see a few other people mentioning this in various threads, but I have yet to see any mention of a solution to this problem. I've tried all sorts of combinations of enabling and disabling autocorrect and various xt9 features, but the only way I can get autocorrect back is by uninstalling the HTC Touch keyboard.
By autocorrect, I'm referring to the ability to type in "il" and have it automatically change to "I'll"
Hi - did anybody find a solution to this? I've been searching high and low!
I'm in exactly the same boat - I love HTC keypad as it really helps me use the Kaiser one-handed, but I really miss the auto-correct on the hardware keyboard.
Is there a version of this SIP that doesn't break auto-correct?
I tried the HTC phonepad, but just couldn't get used to it after using the newer Keypad.
I would love to have a good T9 style SIP, but also have autocorrect on the hardware keyboard......anybody that can help?
Thanks!
I'd noticed that too, quite annoying as the touch keypad is so useful.
6thElement said:
I'd noticed that too, quite annoying as the touch keypad is so useful.
Click to expand...
Click to collapse
I too found the same issues yet I loved the T9 input using the touch pad. I removed the xT9 one and installed this one instead.
You still get T9 and it works fast too. The internal keyboard auto correct also works with it too.
Is also made by HTC but can't remember where I found it. May have been on here before or recently.
I've been earching for a solution to this as well for months now. The autocomplete that XT9 disables is part of wm6 which it calls "word completion." When XT9 is installed via htc keypad, word completion ceases to work along with the feature that auto-fills contacts as you start to type a new SMS.
Thanks for posting that pkonepad cab, but unfortunately.that' the sip that radatia mentioned above. The buttons on the new HTC touch phonepad are bigger and easier to use.
What we really need is someone here that knows some programming to somehow alter the touch phonepad so that xt9 can be toggled on and off (without a registry change and restart), or better yet somehow change it to use a T9 like the phonepad's instead of xt9...
I have exact same problem. I love the htc virtual keyboard because became useful. However once I installed it, the hardware keyboard word completion no longer work I need that too because I use it.
I have another question, do anyone know if I can make the default windows word completion to auto select the top most word suggested list so I can just enter space bar to select it. Now I always have to use down key to select the word 1st. Not efficient.
Just wanted to bump this topic. There have got to be others out there who share our frustration... and someone who can put an end to it!
I've given up on the HTC Keypad, much as I like it and it making the device usable one-handed.
Have moved onto the PocketCM Keyboard as my preferred SIP just so that I can still keep word completion when using the hardware keyboard.
Hope that someone posts here if a solution is eventually found......
oh man!
I'm the opposite.. how I wish the hardware keyboard is not auto correct enabled when I use it.
I've tried dis-abling the auto correct etc.. dun seem to work..
now using Resco keyboard..
it's the next best thing, but kinda defeats the purpose of getting the tytn II in the first place.
Yes the touch keyboard has many issues when used on kaiser. i can't get autocomplete to work with the hardware keyboard either unfortunately.
I do know that "multiword completion" in the xt9 settings or whatever is a bad thing and causes other problems, so i uncheck that. But, still can't figure out how to get autocomplete to work.
I spent a lot of time searching and installing/uninstalling these things to try and find a perfect mix, no luck though. It's still QUITE usable for me, but i would like auto complete for hardware keyboard, though, i dont think i'd use it as i type realy fast anyways with it.
It's quite hard to justify buying a keyboard when we are able to install a free one that *almost* does what we want! pcmkeyboard with iphone buttons and XL touch skin is good, but i am realy starting to like xt9.
:-( i have this problem now and love the keyboard...

need help virtual keyboard

I've done a a lot of reading and made good progress, but I'm stuck on this one.
I'm using "Ruu_Signed_Duttys_WM6.1_Official_5.2.19209_1_58_16_27 [FIX]" build atm and while it's fast and I like it for the most part, the keyboard is horrible, takes up half the screen is missing keys and I really don't like it. I've tried to get back the original keyboard but it won't all me to switch from the one he has built into the rom. I've uninstalled the pcm keyboard and installing Keyboard_Cert.reg KeyboardSkins.CAB and also SJ KeybSkin_Touch.cab. in several variations. At best I was able to turn the keyboard white with black letters.
How can i get rid of the pcm keyboard and load the defaults.
please help
p.s. How come many of the dutty roms and have a password and they say the password is in the 1st/2nd post but it's not? I read some of those 6 times and searched them for "pass" and never found the password. I found some people listing a password later in the thread, but it was a password that did not work.
Am I writing in the wrong language or something? I've spent at least 20 hours reading wikii and faq's and post after post and seariching with google and the site's built in search only to wind up going in circles, trying to find specific answers, but not getting anywhere.
Would someone please point me to the info or just tell me ?
Still need help
yea this thread should be answered i have having the same problem..
I have Duttys Diamond V1 ROM. I didn't like the default kayboard or the XT9 that guesses what word your trying to type. My ROM did have the original defult keyboard installed but it would not stay my defult keyboard after a soft reset. I'm not sure exactly what you issue is but this might help.
Install "disable XT9" cab to disable XT9
Install "SIP change" cab change the defult kayboard to the one of you choice.
the above can be found here (look for post 139, should be the 4th post down):
http://forum.xda-developers.com/showthread.php?t=398271&page=161
I'm also including:
the "OEM default Keyboard" cab, with I assume installs the OEM keyboard (if you don't have it), and "Tilt keyboard fix" incase you have a Tilt with a hardware keyboard that dosen't have the FN keys coerectly mapped fot the Tilt.
Hope that's what you looking for.
Thanks worked fine only took about 1 min.
jonb2 said:
Thanks worked fine only took about 1 min.
Click to expand...
Click to collapse
Glad to help...

Diamond Keyboard problem

Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?

[CAB] Speeding up your Hardware keyboard Responce - Disable XT9

This is a cab that i used to ALWAYS use on my Kaiser to speed up the keyboard response of the device. Just tried it on my Fuze running ROMEOS and it definitely showed signs of improvement.
Install the CAB and soft-reset. Post your findings to this thread.
Makes this change:
Code:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
Hi, I've tried this registry hack on TouchHD with production firmware, and it certainly does disable XT9 and re-enable the native WM predictive text, *BUT* it makes my TouchHD slow to a crawl. The phone still works but extremely slow (like 2-3 second reponse delay) and also gets extremely hot behind the CPU. It's as though there is still some process in the background desperately making unanswered function calls to XT9. I've had to re-enable XT9 just to make my TouchHD responsive.
Can anyone point me to a CPU/process tool so I could see what it is taking up all those CPU cycles and generating all that heat when XT9 is disabled?
You tried that hack on the Touch HD? Does that even have a hardware keyboard? I don't think that it was supposed to work with that phone. (Maybe?)
yeah.. this would have no effect on sip inputs...
Well there is one problem i got is that when i install this tweak i cant type æøå on the hw keyboard:/ (norwegian keyboard) so is there away to use this tweak with norwegian keyboard support?
Still searching as well
I am also still searching for a way to get rid of the whole friggin' black et9 input bar, but keep my hardware keyboard to be responsive to the sym key, and the function key for typing euro sign and pound sign.
I hate the black input bar, especially since after you type first name in a text message address bar, and press space for a second name, it fills ion a name that's highlighted at the moment.
That's just so annoying...
Anyone any clue on how to deactivate et9, but keep the hardware keyboard fully functional?
Is it working for Raphael??
chetstriker said:
Is it working for Raphael??
Click to expand...
Click to collapse
it is posted in the Raphael Software section. do you now think it's working?
I think it wirked.
I have jsut installed it on my kaiser and it seems to work very well, But i am also old school and running solace v1, works great thank you! no more.. t hanky ou...lol
just pade the registry change...
seems to be working well... barely any lag at all...
i've made this change VVV as well in hopes to fix this problem... it also helped a little
Code:
HKEY_CURRENT_USER\ControlPanel\Keybd
“InitialDelay”=dword: dec 775
“RepeatRate”=dword: dec 23
with this one tho seems a lot better.
After i uninstalled this "disable xT9" my manilla sms meny dissapeared... Anyone knows how to restore it?
this actually got my sip full qwerty keyboard stuck in number mode...
i just changed it back to et9ime.dll and it's back to normal...
too bad... seemed to work well for the hard keyboard.
Works well for me on my HTC Touch Pro.
Thanks heaps ... it's been bugging me for a while.
are u able to uninstall this if dont like?
are u able to uninstall this?
frankjr927 said:
are u able to uninstall this?
Click to expand...
Click to collapse
When I uninstalled this my sms meny in manilla disapeared :S
Works great for me, I've been looking for something like this! Thank you very much!
just a lil warning...
Be careful installing this on touch pros/fuzes. It has been known to get the on screen keyboard stuck on numeric mode. Some ppl have gone upto a week or two without the problem showing up. Just a heads up.
just a lil warning...
Unfortunatley, I did not read this post prior to installing the xt9 disable software on my Fuze. I really enjoyed everything, such as the older style auto correct, and the list of suggested words. Now that juicy "Full QWERTY" is stuck in number mode. Is there a fix for this? Any help will be much appreciated.
Cheers,
Rick
I did the reg change to get the win mob predictive text... which worked until I did a soft reset. After that, my FULL QWERTY is also stuck in number mode.
Changed the reg back to original, and I got back my FULL QWERTY. No need to soft reset.
this helped me! HTC messaging with hardware keyboard on xperia is much faster now... but not windows messaging...
but I found this, which helped out with that too...
http://forum.xda-developers.com/showthread.php?p=4195099#post4195099
great!

Categories

Resources