I've done a a lot of reading and made good progress, but I'm stuck on this one.
I'm using "Ruu_Signed_Duttys_WM6.1_Official_5.2.19209_1_58_16_27 [FIX]" build atm and while it's fast and I like it for the most part, the keyboard is horrible, takes up half the screen is missing keys and I really don't like it. I've tried to get back the original keyboard but it won't all me to switch from the one he has built into the rom. I've uninstalled the pcm keyboard and installing Keyboard_Cert.reg KeyboardSkins.CAB and also SJ KeybSkin_Touch.cab. in several variations. At best I was able to turn the keyboard white with black letters.
How can i get rid of the pcm keyboard and load the defaults.
please help
p.s. How come many of the dutty roms and have a password and they say the password is in the 1st/2nd post but it's not? I read some of those 6 times and searched them for "pass" and never found the password. I found some people listing a password later in the thread, but it was a password that did not work.
Am I writing in the wrong language or something? I've spent at least 20 hours reading wikii and faq's and post after post and seariching with google and the site's built in search only to wind up going in circles, trying to find specific answers, but not getting anywhere.
Would someone please point me to the info or just tell me ?
Still need help
yea this thread should be answered i have having the same problem..
I have Duttys Diamond V1 ROM. I didn't like the default kayboard or the XT9 that guesses what word your trying to type. My ROM did have the original defult keyboard installed but it would not stay my defult keyboard after a soft reset. I'm not sure exactly what you issue is but this might help.
Install "disable XT9" cab to disable XT9
Install "SIP change" cab change the defult kayboard to the one of you choice.
the above can be found here (look for post 139, should be the 4th post down):
http://forum.xda-developers.com/showthread.php?t=398271&page=161
I'm also including:
the "OEM default Keyboard" cab, with I assume installs the OEM keyboard (if you don't have it), and "Tilt keyboard fix" incase you have a Tilt with a hardware keyboard that dosen't have the FN keys coerectly mapped fot the Tilt.
Hope that's what you looking for.
Thanks worked fine only took about 1 min.
jonb2 said:
Thanks worked fine only took about 1 min.
Click to expand...
Click to collapse
Glad to help...
Related
Hola to everyone
I'm new here, and I most say I have been reading around and it is a great forum . I also got a HTC TyTN II, and installed the HTC Touch Keyboard... it works fine!
However I don't have a clue about how to dissable the bar just on top of the keyboard... it shows up suggesting some words while I am typing but dont know how to handle it...
How to get rid of that letter sugestion bar? Or how does it works? Is there kind of help about that in some thread here?
Thanks in advance for your help...
It's going to be a LONG road if you don't learn to search and read, my friend.
grizzley said:
It's going to be a LONG road if you don't learn to search and read, my friend.
Click to expand...
Click to collapse
In the interest of good will........
Try looking under settings, input, word completion.
I second what grizley said.
Try looking for a disable xt9 cab. This disables the suggestion above the keyboard.
The suggest as you type is in Input settings.
Hi guys
Thanks,
Sorry if I said something obvious... (Im really getting use of Windows Mobile environment, I used to have a Nokia with symbian) When I posted here it was becuase it was already driving me crazy taping here and there for more than one hour (I like the riddles but...) I had no results. I was trying all kind of things in Imput (the up arrow)>options... but nothing worked to get rid of the suggestion bar, at least not in HTC Touch keyboard. In the TouchPal it was easy, it has its own options to solve this things.
I was trying in Settings>Imput and unchecking word completion, for instance, as suggested here... I also changed the language to mine (spanish) does not work yet, and the HTC Touch keyboard is now kinda frozen: means I push the letters and they do not react (nunbers do). I soft reseted, and the problem is still there. Next step: I will uninstall HTC Keyboard, and then (maybe) install it again. Anyway, Touchpal seems to be a easier and handier keyboard...
I love (so far) my HTC Diamond but there is one pretty annoying problem. It seems I cannot get word suggestions while typing and this is for any keyboard type.
Any ideas?
Same problem in the IPAQ 614c
I am having the same problem on my IPAQ 614c. I installed this file to disable to XT9 option but it did not help. It may work for you. I would love to get an answer to my problem. Many thanks.
Jay
Could you please post a link to the discussion where this file is described?
Have you played around with the T9 settings?
Start/settings/input/ (check the word completion tab here and choose your options)
Go back to unput method tab
Have compact Qwerty in the window/Options/T9 settings
unfortunately this doesn't work.
keyboard
The best is TouchPal 3.0
correction, I'm speaking about default WM keyboard not about HTC one.
Ok, do you have a Word Completion tab in your input settings?
If so, which options have you chosen?
I have tick Suggest word when entering text
Suggest after entering 4 letters
Suggest 4 words
Tick in Add space after word
Tick in Enable Auto Correct.
I'm sorry, I was wrong, I just tried this out myself, and mine isn't working either. I've never used the normal keyboard before, as it's so small, but it seems like having the Touch keyboards stops that word suggestion happening in normal keyboard. My apologies.
There seems to be a solution to this problem here: PocketCM Keyboard. Good luck! I have tried it and it works great. Awesome!
This Should Work
I am finding a Japanese keyboard for Diamond
My Rom is Chinese Traditional, dunno if it is HK Rom or TW Rom
Then I reached here: http://my.opera.com/cameron_en/blog/2008/02/03/ime-complete-installation-files-download-section
I tried following the instructions there but I cannot use henkan (変換) button, or even backspace.
My activated ChangJie input cannot be used as well.
The black bar (start menu bar) was on the top of the green screen which the texts "Windows Mobile 6.1" are there when I boot up my phone after the JP keyboard is installed, and the icons on the bar were not on there places. For example, the windows flag is in the middle.
I found they are not useful I uninstalled them all, the default input "ChangJie" can be used without problems, but the black-bar problem is not solved, I have to hard reset my phone.
Question: Now I haven't hard reset it yet, and want to know
1, How can I make the Japanese input works without any problems
2, Could anyone please let me know if there is another JP input for WM6 which works.
Thanks, and sorry for my Eng coz I am a Chinese.
Today I did a hardreset and reinstall IME without Chinese files, Korean files, enabler files and registry fix
All the problems were still here, until I uninstall the korechithai.cab, ChangJie started to work, but those JP IME input method has the following results:
Kana: Only Katakana can be type but cannot Henkan (変換)
Romaji: Only English and Numbers can be typed.
I only hope the two above works, Tegaki and Kensaku are about handwrite which I think is so inconvenience, although these two works quite fine.
I also tried Bagojs Input but all its input methods have to use handwrite.
Glad to hear if there is another Japanese input keyboard or make the Ask IME_31J works.
Thanks
hello!
i'm searching a cab to read japanese, but i can't find anything, have u any idea to do it?
Maybe inside the web the cab korechithai.cab meets you needs.
But I suggest you backup first because I dunno about this!~
In my qtek s200 I got suggestions of words (without T9) that the qtek learned.
Now with diamond it doesn't work without t9.
I tried to change it in settings but with no results.
Any suggestions?!
Thnx!
Try search the forum with "word completion" as the keyword. You should be able to find an answer there.
Thnx... but I tried many things but in one way or another there is always at least one problem.
First I tried with registry... and the alphabetic keyboard was not present anymore (only numeric). Then I tried with a cab that was in another thread and it worked only with the first letter and if I start deleting the word (incredibly the word completion started) then when I start with the next word again nothing happens. Also with this cab after a couple of hours the same problem like in registry....
I have no solution till now!!!
Can anybody halp me to make my word completion works... without T9 and for every word that I start writing and with no disappearing alphabetic keyboard!?!?
Thnx a lot!!!
Urosh
I realised that all the solutions were for MS input method...
Is there a solution also for HTC input methods?? Like qwerty keyboards!?!
Thnx!!
Urosh
Yesterday I gave up on the Diamond keyboard and installed "TouchPal" it really is a lot better and faster to enter text, google it and give it a try.
Link: http://www.cootek.com/
uniqueboy said:
Yesterday I gave up on the Diamond keyboard and installed "TouchPal" it really is a lot better and faster to enter text, google it and give it a try.
Link: http://www.cootek.com/
Click to expand...
Click to collapse
So it means that really with the HTC keyboard (full qwerty) is not possible to use the word completion?!?! How is it possible?!?!
Any other suggestions!?!?
Thnx
Urosh
This is a cab that i used to ALWAYS use on my Kaiser to speed up the keyboard response of the device. Just tried it on my Fuze running ROMEOS and it definitely showed signs of improvement.
Install the CAB and soft-reset. Post your findings to this thread.
Makes this change:
Code:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
Hi, I've tried this registry hack on TouchHD with production firmware, and it certainly does disable XT9 and re-enable the native WM predictive text, *BUT* it makes my TouchHD slow to a crawl. The phone still works but extremely slow (like 2-3 second reponse delay) and also gets extremely hot behind the CPU. It's as though there is still some process in the background desperately making unanswered function calls to XT9. I've had to re-enable XT9 just to make my TouchHD responsive.
Can anyone point me to a CPU/process tool so I could see what it is taking up all those CPU cycles and generating all that heat when XT9 is disabled?
You tried that hack on the Touch HD? Does that even have a hardware keyboard? I don't think that it was supposed to work with that phone. (Maybe?)
yeah.. this would have no effect on sip inputs...
Well there is one problem i got is that when i install this tweak i cant type æøå on the hw keyboard:/ (norwegian keyboard) so is there away to use this tweak with norwegian keyboard support?
Still searching as well
I am also still searching for a way to get rid of the whole friggin' black et9 input bar, but keep my hardware keyboard to be responsive to the sym key, and the function key for typing euro sign and pound sign.
I hate the black input bar, especially since after you type first name in a text message address bar, and press space for a second name, it fills ion a name that's highlighted at the moment.
That's just so annoying...
Anyone any clue on how to deactivate et9, but keep the hardware keyboard fully functional?
Is it working for Raphael??
chetstriker said:
Is it working for Raphael??
Click to expand...
Click to collapse
it is posted in the Raphael Software section. do you now think it's working?
I think it wirked.
I have jsut installed it on my kaiser and it seems to work very well, But i am also old school and running solace v1, works great thank you! no more.. t hanky ou...lol
just pade the registry change...
seems to be working well... barely any lag at all...
i've made this change VVV as well in hopes to fix this problem... it also helped a little
Code:
HKEY_CURRENT_USER\ControlPanel\Keybd
“InitialDelay”=dword: dec 775
“RepeatRate”=dword: dec 23
with this one tho seems a lot better.
After i uninstalled this "disable xT9" my manilla sms meny dissapeared... Anyone knows how to restore it?
this actually got my sip full qwerty keyboard stuck in number mode...
i just changed it back to et9ime.dll and it's back to normal...
too bad... seemed to work well for the hard keyboard.
Works well for me on my HTC Touch Pro.
Thanks heaps ... it's been bugging me for a while.
are u able to uninstall this if dont like?
are u able to uninstall this?
frankjr927 said:
are u able to uninstall this?
Click to expand...
Click to collapse
When I uninstalled this my sms meny in manilla disapeared :S
Works great for me, I've been looking for something like this! Thank you very much!
just a lil warning...
Be careful installing this on touch pros/fuzes. It has been known to get the on screen keyboard stuck on numeric mode. Some ppl have gone upto a week or two without the problem showing up. Just a heads up.
just a lil warning...
Unfortunatley, I did not read this post prior to installing the xt9 disable software on my Fuze. I really enjoyed everything, such as the older style auto correct, and the list of suggested words. Now that juicy "Full QWERTY" is stuck in number mode. Is there a fix for this? Any help will be much appreciated.
Cheers,
Rick
I did the reg change to get the win mob predictive text... which worked until I did a soft reset. After that, my FULL QWERTY is also stuck in number mode.
Changed the reg back to original, and I got back my FULL QWERTY. No need to soft reset.
this helped me! HTC messaging with hardware keyboard on xperia is much faster now... but not windows messaging...
but I found this, which helped out with that too...
http://forum.xda-developers.com/showthread.php?p=4195099#post4195099
great!