Nokia BH-900 BT headset can pair with Kaiser but can not connect to it.
When it's paired with Kaiser, the "set as Wireless Stereo" option is always grey; sometimes the "Set as hands-free" option is also grey. The headset icon never appears on the screen.
ruu_kaiser_dopodasia_wwe_1.81.707.0_radio_sign_22. 45.88.07_1.27.12.11_ship.exe is flashed.
Can anyone help with this issue?
Thanks a lot!
Related
I've just upgraded my handset from the SPV M600 to the M700.
On my M600 I installed the Tornado A2DP hack and eventually managed to get wireless music streaming to my bluetooth enabled pioneer car stereo.
I never got any of the sound quality problems or skipping problems that other people complained about on their wireless headsets, the quality coming through the car speakers was quite amazing. I ended up writing a mortscript to "set as wireless stereo" whenever I switched bluetooth on and the stereo was recognised by the phone.
I have run in to a problem with the M700 whereby when i select "set as wireless stereo" it does nothing.
If I delete and re-pair the two devices, it seems to work (Again in amazing sound quality) until I leave the car and try to re-connect.
So.....in conclusion, on the M700, all is the same as the tornado hack on my previous M600 except that after initial pairing, the "set as wireless stereo" command won't work.
If anyone can explain why this is I'd be grateful?
If I were to install the tornado hack on the M700 would it mess anything up?
Ok so nobody was able to help so I went ahead and installed the Tornado Hack anyway and it doesn't alter anything. The "set as wireless stereo" still does nothing.
Does anybody have any problems with connecting other devices for A2DP or is it just me?
Hello
I am a beginner both with the Kaiser and the A2DP . I have paired my Jabra 8010 BT correct and when I push the menu button I get the voice speed dial page with " no tag selected " so I assume my connection to the Kaiser is okay.
But when I want to use the stereo function for HTC Player or Windows mediaplayer the sound is not switching from the speaker to the headset .
Any idea what settings or steps I need to do to get the sound to the BT headset ?
There is as well no little Headset icon in the tool bar as set in page 176 of the manul .. (see I am reading first !)
Thanks for any help .
Freecall
Did you pair the Jabra for A2DP? In the Kaiser's BT settings for the device, you should see two services, Hands Free & Wireless Stereo, and both boxes should be checked. If you see only one service, you'll have to re-pair the Jabra; if you see both, but Wireless Stereo isn't checked, check it.
hmm it looks more like a bug or a intended function.
I have both hands free and stereo profile.
When I delete the bluetooth pairing and re-pair it works like it should:
- Headset icon in menu bar
- when media player start the sound is automatic transfered to head set
but now ... when I switch out BT in the coms manager and switch it on again:
- no headset icon appears at all
- no transfer of sound from media player to head set
even the handbook says (page 176) run steps 1-3 of the paring again.
Does this means I need to re-pair mu stereo headset each time I want to have music transfered to the Heatset after switching off BT on the phone ???
That can not be true or ?
Freecall
confirmed ... looks like before any usage of wireless stereo (after switch off/on BT) I need to go each time into the connection manager, bluetooth settings, left tab on Jabra, select set as stereo ... if this is done the headset Icon appears again in the menu.
I am the only one to whom this looks very complicated to just listen to your podcast ... ?
Why cant the BT profile hold the information that my headset is BT stereo ???
Freecall
I seem to be having the same problem. Every time I turn on my Bluetooth, and every time I make a phone call, I have to un-check wireless stereo, save, then re-check it in order to listen to music via my Jabra BT8010.
I wish there was a fix for this.
Use A2DP toggle to re-connect from the today screen.
I'm using phonealarm on my Diamond for switching on bluetooth during calls for enabling the call on a bluetooth headset (in this case my car)
On my further PDA HTC Touch Cruise this works fine.
On my Diamond, phonealarm enables bluetooth, but no connection was made to the bluetooth headset.
Without software I've the same problem, if I switch on Bluetooth manually during a call, the Option "enable Headset" in the caller menu is deactivated.
Can someone help me?
Thanks
Christoph
I've got a Verizon tab and am trying to connect to a Bluetooth headset so I can make video calls with Fring or something else with a little more privacy than using the speakerphone.
I can't get the tab to find the headset!
I have successfully paired with a Bluetooth keyboard, mouse, and the Jawbone Jambox. While the audio out on the Jambox works fine, the built in mic does not work for speakerphone calls with the tab either.
Anyone have any idea what I can do?
Refer to the headset menu to perform a hard reset on it (on a nokia headset this done by simultaneously pressing power and action buttons till it alternates its LED between red and green). Activate the bluetooth on the tab and make it discoverable. In bluetooth setting scan for devices till the headset appears.
Same Issue
slamorte said:
I've got a Verizon tab and am trying to connect to a Bluetooth headset so I can make video calls with Fring or something else with a little more privacy than using the speakerphone.
I can't get the tab to find the headset!
I have successfully paired with a Bluetooth keyboard, mouse, and the Jawbone Jambox. While the audio out on the Jambox works fine, the built in mic does not work for speakerphone calls with the tab either.
Anyone have any idea what I can do?
Click to expand...
Click to collapse
I have a TMobile tab with the same problem. It connects to my btooth antenna, but not my two btooth headsets.
My headset bluetooth also facing the same problem. I read the manual and it say i have to press the answer button for more than 8 second as a hard reset to the headset. Later my tab can detect the headset.
You should read the manual and try to do hard reset to your headset
Sent from my GT-P1000 using XDA App
Can't seem to find out how to reset the headset. Nothing in the manual or Google (it's a Samsung HM1100).
It's weird - the Astro Bluetooth network shows the headset in its Bluetooth explorer but the GT will not even see the device to pair to.
Firstly you open bluetooth under setting, wireless & network. Press scan for bluetooth. Result, it will not show any bluetooth found. Press back button once only. And again open bluetooth setting. Then you will see all bluetooth devices already detected.
This is a bug. I happen all the time to me.
Please try it
naimmkassim said:
Firstly you open bluetooth under setting, wireless & network. Press scan for bluetooth. Result, it will not show any bluetooth found. Press back button once only. And again open bluetooth setting. Then you will see all bluetooth devices already detected.
This is a bug. I happen all the time to me.
Please try it
Click to expand...
Click to collapse
Still No Luck.
Hello I am having trouble connecting to my Bluetooth headset SonyXb50bs and also my car Bluetooth. First time when i connected it paired and got connected automatically but now that the device is paired I cannot connect it shows in the paired devices list but when I tap on my Bluetooth headset in the list nothing happens. In my old phone Moto g5 I used to tap on my Bluetooth headset name in the paired list and it used to connect but in this nothing happens. Very frustrating.
I think as of now no one faced this issue but I wanna share the solution in case somebody faces this issue.... I called up their tech support and lady guided me through some steps which fixed the problem. So if you're not able to connect to paired headsets or car stereo you just need to go to reset settings and reset network settings once then restart the phone and then you should be able to connect to your Bluetooth devices.
ShanePunk123 said:
Hello I am having trouble connecting to my Bluetooth headset SonyXb50bs and also my car Bluetooth. First time when i connected it paired and got connected automatically but now that the device is paired I cannot connect it shows in the paired devices list but when I tap on my Bluetooth headset in the list nothing happens. In my old phone Moto g5 I used to tap on my Bluetooth headset name in the paired list and it used to connect but in this nothing happens. Very frustrating.
Click to expand...
Click to collapse
First remove Bluetooth pairing and pair again