Hi everybody,
I installed the PocketCM 0.15 in my Kaiser and the size of the program seems to be too big for the screen of the Kaiser...it seems to have been developed for the HTC Touch size...
By the way, I have tried to change the THEMES and the problem is still there. When, for instance, writing an sms with PocketCM using the HTC Keyboard, I am not able to see the last line of keys of the keyboard...
Do you guys know how to fix this?, is there any PocketCM size adapted for the Kaiser, Hermes, screen size??
Thank you all for the forum!
Looking forward for your comments.
M.J.
Works fine on my Vario III.
Try running it in non full screenmode to see if that helps.
It is now up to v0.16, see if that solves your problem.
juncobor said:
Hi everybody,
I installed the PocketCM 0.15 in my Kaiser and the size of the program seems to be too big for the screen of the Kaiser...it seems to have been developed for the HTC Touch size...
By the way, I have tried to change the THEMES and the problem is still there. When, for instance, writing an sms with PocketCM using the HTC Keyboard, I am not able to see the last line of keys of the keyboard...
Do you guys know how to fix this?, is there any PocketCM size adapted for the Kaiser, Hermes, screen size??
Thank you all for the forum!
Looking forward for your comments.
M.J.
Click to expand...
Click to collapse
That doesn't really make sense. The Touch has the same screen resolution as the Kaiser.
Post a screenshot of what you're talking about.
Working fine on my Kaiser, probbly one of your other programs messing it up.
Was working fine on my Kaiser. Try upgrading to 0.16.
I have the same issue with .16, I shut off all programs that boot at startup and the issue remained..
how do you take it out of fullscreen mode?
I think it was designed to run full-screen so there's more to see. I also think there is a way to shut it off. It was a great program because it was both incredibly slow and a total processor hog and dragged my Tilt to a complete halt while it was open.
Related
More shortly, has bothered me touch a cube, and here scrolling worthy alternative I have not found it. Here has decided to leave only scrolling.
It is simple HTC Scrolling (the library is taken from the latest insertion Elf).
Only for WM6.
Now also with a sound.
Can anyone report that this cab works?
I checked, works as in HTC Touch.
well...it crashed my Hermes and i need to hard reset it....=_=
berwick said:
well...it crashed my Hermes and i need to hard reset it....=_=
Click to expand...
Click to collapse
I tested on Herald
Aserg it works with wizard thanks. But the touch scroll feeling is not as good as it is in touch enabled rom.
Thanks, i made thread for you in the wizard forum do check HERE
How to increase sensitivity of the screen? It is possible to try to change value in the register, for example, up to 3000:
HKEY_LOCAL_MACHINE \Drivers \TouchPanel \ PressureThreshold = 9812
If you will pick up correct value, it is possible to make separate cab for wizard
For wizard try with such value if sensitivity will be good I shall make separate cab.
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:2dc1
Can someone describe what exacly it does?? Is this app work like efrost's FTouchFlo???
It is taken from HTC TouchFlo.
Works on HTC Artemis (o2 Orbit)
Increase in sensitivity TouchPanel (It would be good to pick up for each device):
thanks very much now where can i find a rom without touch setting? seems all of th eroms that have been release is touch based
i crossed my fingers and try'it on my HTC Titan. And it did not work. touch screen stop working, so i remove the app and all was normal after. well was nice to try ;-)
Now also with a sound.
Thank you so much for this. Seems to work perfectly on my wing.
It would be good to leave here the responses. The information would be very useful to others.
ASerg, with sound it is working much better.Thanks Again.
ASerg said:
It would be good to leave here the responses. The information would be very useful to others.
Click to expand...
Click to collapse
Well... Tried it on my Herald (the last version with the sound). Didn`t like it - it`s too slow, i mean the reaction of the prog for the finger scrolling. Also, sometimes, it confuses scrolling directions and starts up really late (like 2-3 sec after opening and start scrolling Contacts, i.e.). But I liked the sound, it`s very useful for blind scrolling - in car, i.e..
Deleted, and went back to FtouchFlo.
How to uninstall it
Hello,
I'm using SPB Pocket Plus for scrolling and it does not work very well with your "HTC Scrolling" application.
It is possible to uninstall it ? If so - how ?
im wondering if this exists or not? i thought since almost everything else was available perhaps someone had a cab for this or something very similar to the TOUCH keyboard config. or would this be a part of a Rom?>
its available, i dont have a direct link on this comp. but there are many throughought the kaiser forums
Look at the cab collection post
But note that on my kaiser, it was causing troubles to PocketCM Keyboard...
So I just kept this one : PocketCM keyboard
I also had some troubles with it... on german dictionary the keys stoped working and stuff... i removed it and Use PocketCm Keyboard...
I installed this and it worked very well with the kaiser for T9 text but unfortunatley you lost the ability to
When sending text or e-mail if you type the first couple letters it shows you a list of contacts which meet that description, with this keyboard installed it takes that away and you phisycally have to go into contacts and select them. i use this a lot so anyone that has worked out how to install the keyboard and keep this feature please post up.
Thanks
ive been testing both, my only qualm with PocketCM is some words cannot always be added. ITS VERY annoying...and also the keyboard is still somewhat too small for my fingers...im testing the HTC keyboard as we speak...seems alright but both have advantages
This is a cab that i used to ALWAYS use on my Kaiser to speed up the keyboard response of the device. Just tried it on my Fuze running ROMEOS and it definitely showed signs of improvement.
Install the CAB and soft-reset. Post your findings to this thread.
Makes this change:
Code:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
Hi, I've tried this registry hack on TouchHD with production firmware, and it certainly does disable XT9 and re-enable the native WM predictive text, *BUT* it makes my TouchHD slow to a crawl. The phone still works but extremely slow (like 2-3 second reponse delay) and also gets extremely hot behind the CPU. It's as though there is still some process in the background desperately making unanswered function calls to XT9. I've had to re-enable XT9 just to make my TouchHD responsive.
Can anyone point me to a CPU/process tool so I could see what it is taking up all those CPU cycles and generating all that heat when XT9 is disabled?
You tried that hack on the Touch HD? Does that even have a hardware keyboard? I don't think that it was supposed to work with that phone. (Maybe?)
yeah.. this would have no effect on sip inputs...
Well there is one problem i got is that when i install this tweak i cant type æøå on the hw keyboard:/ (norwegian keyboard) so is there away to use this tweak with norwegian keyboard support?
Still searching as well
I am also still searching for a way to get rid of the whole friggin' black et9 input bar, but keep my hardware keyboard to be responsive to the sym key, and the function key for typing euro sign and pound sign.
I hate the black input bar, especially since after you type first name in a text message address bar, and press space for a second name, it fills ion a name that's highlighted at the moment.
That's just so annoying...
Anyone any clue on how to deactivate et9, but keep the hardware keyboard fully functional?
Is it working for Raphael??
chetstriker said:
Is it working for Raphael??
Click to expand...
Click to collapse
it is posted in the Raphael Software section. do you now think it's working?
I think it wirked.
I have jsut installed it on my kaiser and it seems to work very well, But i am also old school and running solace v1, works great thank you! no more.. t hanky ou...lol
just pade the registry change...
seems to be working well... barely any lag at all...
i've made this change VVV as well in hopes to fix this problem... it also helped a little
Code:
HKEY_CURRENT_USER\ControlPanel\Keybd
“InitialDelay”=dword: dec 775
“RepeatRate”=dword: dec 23
with this one tho seems a lot better.
After i uninstalled this "disable xT9" my manilla sms meny dissapeared... Anyone knows how to restore it?
this actually got my sip full qwerty keyboard stuck in number mode...
i just changed it back to et9ime.dll and it's back to normal...
too bad... seemed to work well for the hard keyboard.
Works well for me on my HTC Touch Pro.
Thanks heaps ... it's been bugging me for a while.
are u able to uninstall this if dont like?
are u able to uninstall this?
frankjr927 said:
are u able to uninstall this?
Click to expand...
Click to collapse
When I uninstalled this my sms meny in manilla disapeared :S
Works great for me, I've been looking for something like this! Thank you very much!
just a lil warning...
Be careful installing this on touch pros/fuzes. It has been known to get the on screen keyboard stuck on numeric mode. Some ppl have gone upto a week or two without the problem showing up. Just a heads up.
just a lil warning...
Unfortunatley, I did not read this post prior to installing the xt9 disable software on my Fuze. I really enjoyed everything, such as the older style auto correct, and the list of suggested words. Now that juicy "Full QWERTY" is stuck in number mode. Is there a fix for this? Any help will be much appreciated.
Cheers,
Rick
I did the reg change to get the win mob predictive text... which worked until I did a soft reset. After that, my FULL QWERTY is also stuck in number mode.
Changed the reg back to original, and I got back my FULL QWERTY. No need to soft reset.
this helped me! HTC messaging with hardware keyboard on xperia is much faster now... but not windows messaging...
but I found this, which helped out with that too...
http://forum.xda-developers.com/showthread.php?p=4195099#post4195099
great!
I have searched and searched, so far all that have the same issue as myself have not had an answer that works. I am bringing this to a new thread, in the hopes it will trigger some ideas on how to fix this.
I do know how to use the search system. I am usually a lurker, having the Diamond (NOT Pro) for a little over a week.
I have tried a number of different things to try to STOP the screen from waking up on a new text message. I have tried everything except the older version 3.2.. of the advanced config utility (I am reluctant to downgrade to older version as I have changed many things and have noticed that if you switch from one config utility from another will not work the same way, example is with TF3dconfig I removed the weather tab and forgot to reset all when I uninstalled it for the 3.3 version of advanced config. I try to re-activate the weather tab in 3.3 and it will not take-alas, another issue for another day). I have a Sprint version of the diamond. The DisableSMSWakeUpEvent does not work on my sprint diamond. It does not show up in the registry and when I create it, it still does nothing. This seems like such a silly thing to not have the option of adjusting in the oem configuration. The Pro has it, why not the non-pro version.
Many thanks for anyone that has a suggestion on how to get this screen to STAY OFF when a text comes in. Perhaps even a lock on incoming text that will be unlocked by the light sensor.
I have also discovered that TF3D does not like gsensor rotation. I wanted the text message to be landscape. Tried Gyrator 2, could not get it to reliably not rotate when a call is active. Tried changescreen, great easy to use, but TF3D overrides this. It works the first time or two, then the TF3D changes it to portrait. I did find that adding a rotate command to a registry entry (found in the forum) then assigned the 'green' phone button long hold to rotate. Works well and is easy as sometimes I do not want it to rotate.
Sorry for the run on, many thanks in advance for the help and insight.
Jeff
Sprint
Next? -->HTC Diamond Pro (I am not missing keyboard as much as I thought I would with TF3D)
HTC Diamond (WM6.1)
HTC Touch (WM6.1 ack! lasted a week)
HTC PPC6800 Mogul (WM6 upgraded WM6.1)
HTC PPC6700 (WM5)
Samsung I600 (WM 4?) (Flip phone)
Kyocera QCP-7035 (Palm) (Flip phone color)
Kyocera QCP-6035 (Palm) (Pseudo flip, greyscale)
A bump to see if anyone has a solution, many thanks for taking a look.
Hi everyone. Heres my problem:
- I have a tytn with custom rom. Yesm i have tried countless of them and none seems to fix this issue. Everytime i switch my phone to landscape (open keyboard) the display goes funny, showing half screen and other menus only show their titles. Any ideas?
I'm going to guess you are using M2D? If so then M2D was ported from a phone with no hardware keyboard so that's why not all tabs show and the display is half screen on homescreen...
I may be totally wrong as not alot to go on
I used bhars, shifu, RED, Pqap (or something like that) and many other, including M2D yes. It seems to be a problem with the the TouchFlo software. Last night i flashed it with Tilt original ROM and it works perfectly, maybe because theres no Touchflo? Isnt there a way of having my touchflo working perfectly? On any ROM?
No as said above it's ported from a device without a hardware keyboard so as been hacked for landscape, with all the functionality it brings in portrait and the looks too it's something we don't fess about
Oh, it was touchflo 3d. Just figured that Tytn 2 has a problem with video drivers, hence the visual problems. Im at the moment using the software of Tytn 1 (which doesnt have a touchflo 3d). But thanks for the fast replies =).