Database Develop

upgrade MDA vario NL without unlocking. Now dead. Help!

I upgrade mda vario with shiprom T-Mobile NL without unlocking CID .. after update mda vario is dead ...
please help me...
dheers
indra9110

anybody ????

hello... anybody can hepl mp please.....

Can you enter bootloader mode by pressing power and recording button. If yes, then your phone is not death yet.

i would love to try to help but i cant quit staring at the beautiful image in your signature
what was your problem again :lol:
seriously try to get to the bootloader screen as mentioned above

thx for answer....
i try to get into bootloader mode ... but still no respon at all .....
Im defenedly frustation ....
sorry my english
indra9110

indra9110 said:
thx for answer....
i try to get into bootloader mode ... but still no respon at all .....
Im defenedly frustation ....
sorry my english
indra9110
Click to expand...
Click to collapse
do the lights even come on? does anything happen? i have seen people try pulling their battery out for a few minutes and even just letting it charge for a few hours..

It might be that your battery power have run out. Try to somehow recharge your battery (use a different wizard device perhap) and retry.

i try to charge the bat with wall charger ... but wizard still wont ON
cheers
indra9110

then your wizard might be brick.

Dead after Upgrading! Please help!

hi all!
G4 Wizard, CID unlocked.
i tried to upgrade to "RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe", but during the upgrade my pc hung up and now my wizard is dead.
Can´t turn on anymore, soft and hardware reset without success. --> COMPLETLY DEAD!
can anyone help me please?

valiumii said:
hi all!
G4 Wizard, CID unlocked.
i tried to upgrade to "RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe", but during the upgrade my pc hung up and now my wizard is dead.
Can´t turn on anymore, soft and hardware reset without success. --> COMPLETLY DEAD!
can anyone help me please?
Click to expand...
Click to collapse
We can't really help you if you can't at least get into bootloader.
Are you sure your battery has some charge left in it?
Have you tried removing the battery for a few mins then re-inserting and re-powering?
Have you tried a known good battery (one from a friends device or one that you bought from a store?
Does this rom contain G4 bootloaders (ie. was it available when G4 devices hit the streets)? If not you may have flashed G3 bootloaders into your device, in which case your device is dead.
You should only flash G4 safe carrier roms (T-Mobile 2.26, Cingular 2.25) to a G4 device.
If you are ever in doubt as to whether or not a rom is G4 safe you should extract it and repack OS or radio only and make sure that IPL/SPL are not included.

thx for your answer.
i am sure, that the battery has some charge left.
i have no other battery.
i think i have flashed G3 bootloaders into my G4 device.
is there any possibility to reanimate my wizard?

valiumii said:
thx for your answer.
i am sure, that the battery has some charge left.
i have no other battery.
i think i have flashed G3 bootloaders into my G4 device.
is there any possibility to reanimate my wizard?
Click to expand...
Click to collapse
unfortunately if that is the case your at the mercy of a repair shop. The only fix is to have the Mainboard replaced. If you are still under warranty and have made sure that there is no way it will boot up at all under any circumstances you can try to take it in and see if they will replace or repair it. Of course if they get it to boot and see that you did something like flash a custom rom they will charge you full price instead of handling it like a warranty replacement.

Why did you flash a PRODIGY rom to a Wizard? They are compatible in some ways I heard, but I am not sure if they are flashable without doing extra stuff.
Try taking your battery out and plugging in the AC cable... you should get the LED to light up..
Then put the battery back in and put the AC cable back in.. then boot into bootloader mode and flash to official CINGULAR WIZARD ROM...

Madcap180 said:
Why did you flash a PRODIGY rom to a Wizard?
Click to expand...
Click to collapse
don´t ask me, why i was so stupid.
Madcap180 said:
Try taking your battery out and plugging in the AC cable... you should get the LED to light up..
Click to expand...
Click to collapse
No way, LED doesn´t light up
Madcap180 said:
then boot into bootloader mode and flash to official CINGULAR WIZARD ROM
Click to expand...
Click to collapse
This it what i want to do, but it´s not possible to boot into bootloader mode.

Madcap180 said:
Why did you flash a PRODIGY rom to a Wizard? They are compatible in some ways I heard, but I am not sure if they are flashable without doing extra stuff.
Click to expand...
Click to collapse
I believe that Prodigy was the name given to the Wizard while in development stage. This means that the RUU you see hanging around mentioning Prodigy upgrade are apropriate for Wizard because they use same uploader utility (NOT the ROM)

Phone locked in bootleader!! Cannot even Hard Reset!!

Hi,
I wanted to update my trinity in the version of S300+ (French) with the original HTC ROM.
Not only it didn't work, but I lost my phone, I cannot access anything even with Hard Reset and battery removal...
When I want to upgrade, it's going till 1% and then it stops and I'm getting a message "Error 286" Cannot connect with phone.
I cannot hard reset, I cannot do anything! When I hard reset, I'm always coming back to the bootloader (I think it's the bootloader, the screen with colors, where it says numbers and it's says USB).
Any idea? A upgrade with miniSD will help?
Thanks!

Start flash utility again and wait untill it starts again (can take sometime).
I had it to when I first flashed a rom.

Hi,
I tried it already, but it's always blocking at 1% of progress and it's telling me in the computer Error 286, and the phone resets and comes back to the bootloader...
Any idea?

I just tried now to update the ROM with the HTC_Trinity_SIM_CID_Unlock_v1, it's going till 14% but then it stops...
Any idea, please?
I cannot send back my device to warantee because updating roms is forbidden...

This will solve all your problems:
http://forum.xda-developers.com/showthread.php?t=308691

sharedworld said:
I just tried now to update the ROM with the HTC_Trinity_SIM_CID_Unlock_v1, it's going till 14% but then it stops...
Any idea, please?
I cannot send back my device to warantee because updating roms is forbidden...
Click to expand...
Click to collapse
Put the phone in BOOTLOADER, then disactive ACTIVESYNC (form menu). After then start MTTY (you found it in the forum) set it on USB and then give the command:
task 32 Enter
task 28 Enter
task 2A Enter
info 8 Enter
task 8 Enter
After the last command the PDA restart and then you make a normal flash.

I concur :
http://forum.xda-developers.com/showthread.php?t=308691
after 1/2 a day wasted on the agony of a my problem phonem I finally managed to get pof's sxpliot to work, and I promise, it does.....

qubit76 said:
I concur :
http://forum.xda-developers.com/showthread.php?t=308691
after 1/2 a day wasted on the agony of a my problem phonem I finally managed to get pof's sxpliot to work, and I promise, it does.....
Click to expand...
Click to collapse
Please give more instruction howto

Can't you just reflash it with an original SFR ROM? And then read correctly all the instructions for the wm6 flash?

biohazard said:
Can't you just reflash it with an original SFR ROM? And then read correctly all the instructions for the wm6 flash?
Click to expand...
Click to collapse
SFR dosen't give any ROM... But the problem is that I cannot get out the bootloader, but I'll use the solution given here.
Thanks!

sharedworld said:
SFR dosen't give any ROM... !
Click to expand...
Click to collapse
Looks there]...and flash again

shym said:
Looks there]...and flash again
Click to expand...
Click to collapse
It's a DUMP... And not a full one... For ex. you do not get the splash screens...

HELP PLEASE!! X1 wouldnt start up!

hey guys, i have a problem with my x1 where it wouldnt start up. It would just go to the tri boot screen and once it does, it ask for an upgrade and then turns off by itself. It would only let me press the power key to upgrade, but once i do it resets and a red light would flash. I tried hard reseting it and syncing to get back to the original rom because i am using a custom rom. I been using this custom rom for many months and had no problem with it. please help guys
please and thank you in advance.

Did you make sure you had AT LEAST 50% battery power? To be safe, you might want to let your phone charge for awhile before attempting to power the phone back on and resuming your task.

phatboy1991 said:
hey guys, i have a problem with my x1 where it wouldnt start up. It would just go to the tri boot screen and once it does, it ask for an upgrade and then turns off by itself. It would only let me press the power key to upgrade, but once i do it resets and a red light would flash. I tried hard reseting it and syncing to get back to the original rom because i am using a custom rom. I been using this custom rom for many months and had no problem with it. please help guys
please and thank you in advance.
Click to expand...
Click to collapse
find any friend who has X1 charge battery full and than try to flash using Micro SD mthod.
on my X1 was problem like that but i flash
about 3 times there was same problem but when i try it again i was ok.
sorry for my bad english. hope u anderstand what i mean.
firs charge your battery full for safe your X1.

Im Packing said:
Did you make sure you had AT LEAST 50% battery power? To be safe, you might want to let your phone charge for awhile before attempting to power the phone back on and resuming your task.
Click to expand...
Click to collapse
i charged it over night, and it still didnt work. ill try it again to make sure. hope it works.

phatboy1991 said:
i charged it over night, and it still didnt work. ill try it again to make sure. hope it works.
Click to expand...
Click to collapse
You flashed rom via data link cable, Did't you?
If Battery empty while flashing rom, now you have a big problem.
You need MTTY to re-alive your X1.
Follow this forums ; How to resolve when has accident while updating ROM.
http://forum.xda-developers.com/showthread.php?t=371154
PS. Flash by using Micro SD method is the best.

chow-doii said:
You flashed rom via data link cable, Did't you?
If Battery empty while flashing rom, now you have a big problem.
You need MTTY to re-alive your X1.
Follow this forums ; How to resolve when has accident while updating ROM.
PS. Flash by using Micro SD method is the best.
Click to expand...
Click to collapse
thnx, i will try this as tomorrow when my x1 finish charging.

so i tried the MTTY and its not working. I did all the steps like closing the rapimgr.exe and wcescomm.exe, but the WCEUSBSH001 isnt showing up. I cant get my x1 to turn on when i want it to. it just starts up by itself and when it does it goes to the boot mode and saids KOVSING.nbh- and ask for an upgrade. Am i doing something wrong? please help

htc tytn ii dead HELLP

Hi, I'm new the forum and we try to solve a problem on my TyTN II.
The phone lights up in image windows where Oreste and says delete phone memory then goes out and no longer lights.
Please if you can help me with my problem what can be done.
enter bootlader but is not recognized by computer
welfare payments is all original.
Thank you

Flash stock rom via sdcard

Please if you can tell how to do
Thanks
Thanks

by searching for the info.

Mr. Clown said:
Flash stock rom via sdcard
Click to expand...
Click to collapse
I did get stuck when loading, Loading written remains.
What must be done or if there is something to do?
Thank you

1xx said:
I did get stuck when loading, Loading written remains.
What must be done or if there is something to do?
Thank you
Click to expand...
Click to collapse
Have you checked out that is not a battery issue? Try another battery

Mr. Clown said:
Have you checked out that is not a battery issue? Try another battery
Click to expand...
Click to collapse
I changed the battery and still remain locked when the load goes.
What to do? It can do anything?