radio rom issue - MDA III, XDA III, PDA2k, 9090 Software Upgrading

i am having a problem with the wm6 upgrade i just did. without sim installed i show a radio rom, once i install the sim the rom disappears. i don't get it. can anyone help me.

hard reset ur device inserting sim card...then i think everythink will be fine...

Related

no gsm radio problem

hi, i've a big problem, i've upgraded my phone today, because it was a mda3 german locked on t-mobile. but the only way to make the upgrade work was not to upgrade radio, so i didn't put it. so, now the phone has been updated in my language, but when i power on it, it says no gsm. can someone say how can i do please!
Which rom did you flash? What is written after letter R while doing a soft reset?
no r
it does not appear anything, the only thing is that
NO GSM
D 5108.a771la
are you sure it's not a CDMA phone? ( j/k)
try reflashing the old rom. and see if it will go back.
if not...
then you are forced to flash the radio rom to a new version
because as you say it cant detect any if you flashed with the new rom.
but i dont see any relevance to the carrier when upgrading the radios, it's still quadband.
and you're stil using the SAME sim card.
hi, i still cannot reflash the radio of my phone, anyone can help me it always says "NO GSM" !!! PLEASE, HELP ME!!!!
please, tell me also if there is a way to format the memory where is installed the radio. thanks
jonnymix said:
hi, i still cannot reflash the radio of my phone, anyone can help me it always says "NO GSM" !!! PLEASE, HELP ME!!!!
please, tell me also if there is a way to format the memory where is installed the radio. thanks
Click to expand...
Click to collapse
As far as I know, the only way to 'format the radio stack' is to flash it with a new radio version.
Your original post is too vague as well.
You have a MDA III from T-Mo, that would make it a GSM = good
"only way to make the upgrade work was not to upgrade radio" - This doesn't make sense as the radio ROM is a separate flash from the OS ROM, the two are not part of the same flash code.
You also 'upgraded' your phone. From what to what? We need to know where and what ROM you flashed the phone to and from.
As for the screen showing NO GSM, is this after power cycling the phone by removing the battery? There is a know bug with WM5 and above where the GSM radio stack is not loaded on boot after a power cycle. The workaround is to soft reset the phone after it shows NO GSM.
(Huh, I'm a senior member now? Wonder when/how that happened... )
hi, thank you for answer.
i dont exactly know which os and radio rom were originally, i bought it original but used and the os was modded by t-mobile in deutch. i upgraded it to wm5 a771la ver 5.1.0.8 and the radio 1.15. then the os worked properly but it says no gsm. i know the bug you said me, because i have it on an another mda III of my brother, there after a soft reset i can solve this problem but it says NO RADIO on two lines, there, there is only one NO GMS . i know that the two roms are in two different flash memories infact i can flash and re-flash the os but when i try to flash the radio an error occurs. please, let make me know if these information can help you to solve my problem. thanks!
jonnymix said:
i know that the two roms are in two different flash memories infact i can flash and re-flash the os but when i try to flash the radio an error occurs. please, let make me know if these information can help you to solve my problem. thanks!
Click to expand...
Click to collapse
And what error is appearing? I didn't see it in your original post.
Personally, I'd try this:
Remove the SIM and any SD cards.
Make sure the battery is fully charged.
Put the phone into boot loader mode
Plug it into a XP (Not Vista) machine
Check to see if the OS recognizes the phone. I believe it will show up as some kind of USB device, not a Generic RNDIS device (I don't have my angel handy to check this)
Then run the radio flash program.
jdc said:
And what error is appearing? I didn't see it in your original post.
Personally, I'd try this:
Remove the SIM and any SD cards.
Make sure the battery is fully charged.
Put the phone into boot loader mode
Plug it into a XP (Not Vista) machine
Check to see if the OS recognizes the phone. I believe it will show up as some kind of USB device, not a Generic RNDIS device (I don't have my angel handy to check this)
Then run the radio flash program.
Click to expand...
Click to collapse
i also have the same problem...how to resolve?upgrade helmi 5.6 rom... NO GSM. phone funtion failed.

Problem after Flashing: Kaiser says no Sim-Card

Hello erverybody!
After flashing my Kaiser i got the problem with my simcard, even though the simcard is in the phone my phone app says that there is no card in it.
I flashed my phone like it is described in the wiki:
1. hardSPL, i had the issue withe the white screen
2. flashed rom: RUU_Kaiser_HTC_GER_3.28.407.0_radio_sign_25.83.40.02_1.65.16.25_Ship with the KaiserCustomRUUv1 and while flashing there were no card in the phone no simcard card no mircoSD.
So then i thougt there is a simlock or anything else therefore i tryed to unlock my phone with KaiserUnlock but after that, the same, the phone says ther is no card inserted!
I tryed to flash another rom but ist the same, phones says no sim card inserted and I also tryed the card in a other phone and ther it works fine so it looks like that the problem belongs to the Kaiser.
has anybody an idea what´s gone wrong? or anybody an idea what i can do to solve this problem?
So i fixed it please close this thread or delet it its seems that my simcard had not enough contact to the pins so i stucked a little piece of paper between the card and the phone and now it works, unbelivable but sometimes the simplest solution is the best

Sim Not Detected after Upgrade to Windows Mobile 6.5

Dear All
I have read as many threads as possible in 2-3 hours but was not able to find the solution of my problem Here is what I Did
I wanted Windows Mobile 6.5 on My phone so i downloaded Hard SPL 3.56 & RevRom V8. I flashed hard spl & rom as instructed in post by experienced users.
Everything went fine and Windows 6.5 started working correctly. Then I shut of the phone and Inserted my Sim Card & Memory Card. The Memory Card was detected but the sim card was not detected. So I started reading the guides again & found that Hard SPL 3.56 is for ATT Roms only. So I downloaded the 3.29 Hard SPL and flashed it. With this my sim card was detected but after two minutes it again showed sim card missing. I again restarted the phone and sim card again worked for about two minutes. Then I thought may be its a radio problem so flashed a New Radio which is 1.70.19.09. But to no effect. I also tried another WM 6.5 Rom, this rom again did not detect my sim completely.
By now it was 6.00 in the morning, I desperately needed my phone to work as I am handicapped without it in office. So I read the post about reverting to original rom & spl and downloaded the HTC Hard Spl 1.56 file available, because i did not had the time to go for extraction and all. Then I flashed it and a Shipped Hong Kong WWE Rom 3.34.721.2 with Radio 1.70.19.09. But still my sim was not detected now I really got frustrated and just began to restart my phone I did this approx 3-4 times and suddenly the sim was detected and phone began to work fine. I checked it for about an Hour it was working fine. So I went for a Bath and when I came back the phone was agan showing Sim Card Missing. This time I took my sim card out again and pressed the metal strip that holds the sim card towards the pin very hard and inserted my card again. The sim was detected and the phone working fine while I am writing this post(approx 3 Hours of Working).
Guys Please guide whats could be the problem with my phone and what DID I do wrong. Can my mistake be corrected or have I made a Huge Blunder.
It looks like hardware issue that the contact got loosen up somewhat. What you did (pressing the metal) should help. Other might insert few layers of paper on top of the SIM to make it 'pressed' towards the contact better.
And this thread should not be on ROM development, but on the Kaiser General (mod might want to move this).
Another possibility is: did you do a HR after flashing the ROM? And flash OEM before flashing customer? Once you reverted back to stock ROM, you should do another HR.
I did the Hard Resets all the time as it was mentioned in the guides I followed the guides completely.
Guys Please also suggest which Hard SPL is best for WM 6.5 Rom 3.29 or 3.34.
Both should work. Ask your chef

Help, Diamond says no sim card when i have one inside

please can someone help me, my diamond says no sim card when there is one inside, my radio version is: 1.11.25.1, and my rom is Gen.Y D2 R4.3.
i have reflashed the radio, reflashed the rom, it has hardspl onto it, i don't know what the problem is, it randomly started last night.

[Q] g1 help needed no signals

hi
need help with my tmobile-htc g1
i am using it in pakistan....
by mistake i did
factory data reset
and now it
at search networks its giving the error
your sim card does not allow connection to this network
and
then i tryed some radio and spl file......
i donot know what i did and now what should i do
and now there is no signals....
there is a (X) on the signals.......
i attach 2 pic
plzz help me out
Is there a sim card inserted? If so - make sure your phone is unlocked . If it still isnt working - it may be due to one of the cables inside the phone becoming loose - this isnt hard to fix as they are located on the top part of the phone.
yes sim card is there.....
thankx for reply.....
its not cables.....
its working fine befor reset.....
i know the it the software problem......
its radio
spl
or rom......
still have that problem

Categories

Resources