Database Develop

Operator Coniguration settings...

I know this has been asked before but 20 min with search and google has only come up with half answers so far.
I was wondering if there was a place that had all of the operator configuration settings. Finding the GPRS t-mobile USA settings are eas, but what about MMS, voicemail (seems not to work with generic world english ROMS), etc?
I have been looking through the ROMs but have found no easy way to rip them out for use with another ROM.
sorry for the probebly stupid post.

Here are some different sets of Settings for TMO USA.
For GPRS/Edge
TMO Simple GPRS:
1. Click on start button, settings, connections
2. Click on the "connections" icon
3. Click on "manage existing connections"
4. Click on "edit" to edit the T-Mobile GPRS entry
5. Click Next to get to the setting called "Access point name"
6. Change this to "internet2.voicestream.com" (you can also try wap.voicestream.com)
7. Click next, then finish (no username and password or domain)
For MMS:
MMS Settings TMO 3 Dec 06
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter "T-Mobile MMS" in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select "T-Mobile GPRS" from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Sending Size Limitation: 292K
14. WAP Version: WAP 2.0
15. Click OK
16. Highlight "T-Mobile MMS"
17. Click "Set As Default"
18. Click OK
Note: the previous examples assume you've named the connection T-Mobile GPRS
This worked for me once and than I couldn't get it to work for me again. I also have a .cab file which sets this to work perfectly on the Wizard for TMO USA. I've uploaded to me.
Lot's of people complain on this site that people don't read previous posts. I've read for hours and not found what I need. That's why I'm answering you r post

rambo6 said:
Here are some different sets of Settings for TMO USA.
For GPRS/Edge
TMO Simple GPRS:
1. Click on start button, settings, connections
2. Click on the "connections" icon
3. Click on "manage existing connections"
4. Click on "edit" to edit the T-Mobile GPRS entry
5. Click Next to get to the setting called "Access point name"
6. Change this to "internet2.voicestream.com" (you can also try wap.voicestream.com)
7. Click next, then finish (no username and password or domain)
For MMS:
MMS Settings TMO 3 Dec 06
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter "T-Mobile MMS" in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select "T-Mobile GPRS" from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Sending Size Limitation: 292K
14. WAP Version: WAP 2.0
15. Click OK
16. Highlight "T-Mobile MMS"
17. Click "Set As Default"
18. Click OK
Note: the previous examples assume you've named the connection T-Mobile GPRS
This worked for me once and than I couldn't get it to work for me again. I also have a .cab file which sets this to work perfectly on the Wizard for TMO USA. I've uploaded to me.
Lot's of people complain on this site that people don't read previous posts. I've read for hours and not found what I need. That's why I'm answering you r post
Click to expand...
Click to collapse
great write up! but unforunately, i tried it on my 8525 and it didn't work. i'm still not able to get MMS.
i assumed this would work on the 8525 as well.

Wizards are funny that way sometimes things work other they don't, at least that's what I have been able to understand from my experience with mines. About MMS settings I've noticed that if I do a hard reset and mess around with the settings a bit, and leave the MMS settings for latter that no matter how many times I put them in they won't work, now if I do a hard reset and the first thing I do before settings anything else up is do my MMS and my GPRS settings using the exact same settings everything works perfectly, and another thing I usually just punch in the settings myself, I haven't had one of those network settings cab work for me yet. In other words if you've tried everything else and no dice, you might think about doing a hard reset and setting up all these things as soon as you can.

masr1979 said:
Wizards are funny that way sometimes things work other they don't, at least that's what I have been able to understand from my experience with mines. About MMS settings I've noticed that if I do a hard reset and mess around with the settings a bit, and leave the MMS settings for latter that no matter how many times I put them in they won't work, now if I do a hard reset and the first thing I do before settings anything else up is do my MMS and my GPRS settings using the exact same settings everything works perfectly, and another thing I usually just punch in the settings myself, I haven't had one of those network settings cab work for me yet. In other words if you've tried everything else and no dice, you might think about doing a hard reset and setting up all these things as soon as you can.
Click to expand...
Click to collapse
yep thats right, i had to hard reset my 8525 and the .cab worked just perfect... that's weird

TMO USA GPRS Configuration stop working after July 23, 2007
rambo6 said:
Here are some different sets of Settings for TMO USA.
For GPRS/Edge
TMO Simple GPRS:
1. Click on start button, settings, connections
2. Click on the "connections" icon
3. Click on "manage existing connections"
4. Click on "edit" to edit the T-Mobile GPRS entry
5. Click Next to get to the setting called "Access point name"
6. Change this to "internet2.voicestream.com" (you can also try wap.voicestream.com)
7. Click next, then finish (no username and password or domain)
For MMS:
MMS Settings TMO 3 Dec 06
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter "T-Mobile MMS" in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select "T-Mobile GPRS" from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Sending Size Limitation: 292K
14. WAP Version: WAP 2.0
15. Click OK
16. Highlight "T-Mobile MMS"
17. Click "Set As Default"
18. Click OK
Click to expand...
Click to collapse
I have used the setup above for years in my 8125.
Unfortunately, after July 23rd, TMO USA updated their system and my GPRS settings stop working for some reason...
Does anybody has the new GPRS configuration for TMO USA?

I struggled with this today as well until I tried Gateway "216.155.165.50" not "216.155.165.050". All is well now.

O2 Pay and go Wap

I Currently have the O2 XDA Mini S (in the UK) and I have in it a Pay and go sim card, O2 have locked the device so that only contract customers can use GPRS and WAP functionality. Is there anyway around this? Will flashing the device resolve my problems?
Many thanks,
Josh.
*edit* I've just successfully flashed and unlocked the device, I was just wondering where I can get the settings I need for pay and go on o2, if not are there any other UK networks that do allow the Wizard to access the Internet on pay and go?
I've found the answer:
How do I manually check / setup the GPRS WAP settings?
Go to [Start]
Tap [Settings]
Tap [Connections]
Tap [Connections]
Under [My Work Network] tap [Manage Existing Connections]. If this is not present tap [Add a new modem connection]
Tap [Edit]
The [Select a Modem] drop-down box should be set to:
XDA Mini S: [Cellular Line (GPRS)]
Tap [Next]
The [Access Point Name] should be set to: wap.o2.co.uk [Post-Pay] payandgo.o2.co.uk [Pre-Pay]
Tap [Next]
The [Username] should be set to: o2wap [Post-Pay] payandgo [Pre-Pay]
The [Password] should be set to: password
Leave [Domain] blank
Tap [Advanced]
On the [TCP/IP] tab, only [Use Server-assigned IP Address] should be selected
Tap the [Servers] tab
Only [Use Server-assigned IP Address] should be selected
Tap [ok]
Tap [Finish]
Tap [Proxy Settings]
Tap [Advanced]
In the [WAP] field enter: 193.113.200.195
In the field to he right of this enter: 9201
In the [HTTP] field enter : 193.113.200.195
In the field to he right of this enter: 8080
Tap [ok] 4 times and exit
To access normal websites wsp:// needs to be placed before the address instead of http://
My final question now is whether there is a way to make it by default put wsp:// before web addresses instead of http://

Ahhh dood,
Thanks loads. I have been trying for AGES to get this wrking on payg
Finally!!
I have one of those Sims where i get free texts and 1MB of internet but never go the internet going but finally i can go on Messenger wherever!
Cheers a bunch!!

thanks!! i have also been trying to get gprs working on my mini s and now i can!!! * goes off to celebrate by not having to trawl around finding open access points to buy stuffies on ebay*

error sending and receiving picture messages

i hard spl'd my phone and now i am unable to send or receive picture messages under mms.....it asks me to download but is unable to download or send after countless tries.....anybody have this problem or know a fix?

Try looking at your other topic.

had similar problem
for me, fix was go to a new mms message, go to the MMS options via the menu, go to servers tab, and take out a "default" server that shouldn't have been there. Setting my t-mobile mms server to default did the trick.
good luck
MystaKlepto said:
i hard spl'd my phone and now i am unable to send or receive picture messages under mms.....it asks me to download but is unable to download or send after countless tries.....anybody have this problem or know a fix?
Click to expand...
Click to collapse

For T-Mobile if you have another carrier let me know
Setting up the data account
On the PDA, tap on Start and then Settings.
Tap on the Connections tab.
Tap on the Connections icon.
Tap on the Advanced tab.
Tap on Select Networks.
Tap on New…
In the Enter a name for these settings: field, enter T-Mo MMS
Tap on the Modem tab.
Tap on New.
In the Enter a name for the connection: field, enter T-Mo MMS
Tap on the Select a modem: drop down list and select Cellular Line (GPRS, 3G).
Tap on Next.
In the Access point name: enter wap.voicestream.com and tap on Next.
In the Username: LEAVE BLANK
In the Password: LEAVE BLANK
Tap on Finish.
Tap on ok three times.
Tap on x to close the settings.
Setting up the MMS account
On the PDA, tap on Start and then Messaging.
Tap on Menu and select Tools then tap Options...
Tap on MMS.
Tap on the Servers tab
Tap on New.
In the Server name: field, enter T-Mo MMS In the Gateway: field, enter 216.155.165.50
In the Port number: field, enter 8080
In the Server address: field, enter [B]http://216.155.174.84/servlets/mms[/B]
Tap on the Connect via: drop down list and select T-Mo MMS
Tap on the WAP Version: drop down list and select WAP 2.0.
Tap on Ok.
Tap on T-Mo MMS and tap on Set As Default.
Tap on ko twice.
Tap on x to close.
The settings have been applied and are ready for use.

mms help plz
i downloaded a new rom to my tmobile wing and it does not gave my the opp too send mms msg...i tryed everything is there a cab. file for it or sumthing plz plz help

MMS Settings for O2

does anyone have the mms setting that would work with aunlocked tytn 2 using an O2 sim
many thanks

this is from O2
MMS
O2 MMS Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'

It will depend on pay as you go or contract, i used this to set up Pay as You go attached just install it puts a prog in start menu click on and install.

AT&T US 3G/Data settings for iPhone Users

Edit: Whoops! Looks like this belongs in a different forum! My apologies for apparently not doing enough homework!
Hi all, I've looked around online and found no mention of the fact that the 3g/Data settings for those with an iPhone Data plan are different than the standard wap.cingular... So for those of you with iPhone data plans looking to use a different phone, here's some info:
---APN settings for data---
APN: phone
Username:
Password:
---APN settings for MMS---
APN: wap.cingular
Username:
Password:
Server (MMSC): http://mmsc.cingular.com
Proxy: wireless.cingular.com
Proxy port: 80
Update 2010-08-19:
Setup steps for WM 6.1
----------- Connection Setup -----------
From the Start menu select Settings
Go to the Connections tab at the bottom
Tap the Connections icon
In the Advanced tab tap Select Networks
You should be at a page that says Network Management
Under "Programs that automatically connect to the internet should connect using:", tap New
You should see a screen with three tabs: General, Modem, and Proxy Settings
In the General tab enter AT&T MMS for the name of the settings
In the Modem tab, tap New
Enter "iPhone MMS" for the name
Under Select a modem: select Cellular Line (GPRS, 3G)
Hit next
Under Access point name: type in wap.cingular then hit next
Ignore the last page... press finish
In the Proxy Settings tab make sure that This network connects to the Internet is not checked
In the upper right corner of the screen press ok
You should be back at the Network Management page
Tap New again
In the General tab enter AT&T Data for the name of the settings
In the Modem tab, tap New
Enter "iPhone APN" for the name
Under Select a modem: select Cellular Line (GPRS, 3G)
Hit next
Under Access point name: type in phone then hit next
Ignore the last page... press finish
In the Proxy Settings tab make sure that This network connects to the Internet is checked
In the upper right corner of the screen press ok
Press ok again
Press ok a third time
----------- MMS Setup -----------
Now get to the list of your text messages
Hit Menu and select MMS Options
You should now be at a Settings page
Go to the Servers tab
If you already have an AT&T MMS server select that, othewise select New
Under Server Name: type AT&T MMS
Under Gateway: type wireless.cingular.com
Under Port Number: type 80
Under Server address: type http://mmsc.cingular.com
Under Connect Via: select AT&T MMS (this is the name of one of the connections we just set up)
Under Send limit: select 1000K
Press Done
In the upper right corner of the screen press ok
Soft reset for good measure...
Test out your settings! Good luck!
Disclaimer and additional info: I cannot guarantee that these settings and/or this procedure will work for you. All I know is that this works for me. Also, I cannot guarantee that AT&T will not notice that you are not using an iPhone with your iPhone data plan and change your plan and charge you $$$$$. If you bought your phone from AT&T, then they can use your IMEI number to figure out exactly what kind of phone you are currently using. If you didn't buy your phone from AT&T they can still figure out that your phone isn't bought from AT&T. In fact their system does this automatically to display a picture for your phone when you login to your account online. However, to my knowledge (which isn't that good), their system does not automatically change your data plan. If you call AT&T for help with something, you should have an iPhone to make the call with, otherwise the support people can notice. Use all of the above info at your own risk.

what about this?
http://modmyi.com/wiki/index.php/Carrier_APN_Settings#Cingular
aren't these the iphone settings?

Those are not the settings that the iPhone uses. As far as I know, those are the settings that everybody else uses.