I have a tilt and it seems that my fn is not working properly.
what i mean is that when i use the fn + another key it never corresponds to the key that is on my keyboard...
ex:
fn + E = ? in my case it always give me something different than what in blue on my keyboard.
can anyone help me fix this problem
thank you for your time in advance
Have you flashed a different rom to it? possibly one written for the Kaiser? is so look for the the keyboard fix there is one I've seen it I just don't know where it was but I know it was here.
This is where you want to go if you have an AT&T Tilt: http://forum.xda-developers.com/showthread.php?t=334911
For Example:
This will make my Fn + X to be "
Click to expand...
Click to collapse
ive intalled the cab fix you guys suggested and still no luck
btw ive flashed the duttys v3 rom
does anyone has the same problem???
it requires a soft-reset... have you done that?
Related
Hello,
I had one Universal and now switched to Kaiser. My problem is that I can't type special letters like " ç Ç á à ú" and others like it.
I try'd fn+Space or fn+tab/Sym key but all I get is a table with all special characters.
In my universal I only had to press Sym and the letter.
I'm using Dutty's v4 rom.
Please can anybody help me?
Thanks.
I've the same problem with my Kaiser
Sym.txt file is correct, placed in windows folder
So it's not only my problem.
Are you using the same Rom that mine? (Dutty v4)
hrbi said:
Sym.txt file is correct, placed in windows folder
Click to expand...
Click to collapse
How do you edit the sym.txt file??
How do you edit/delete other files that WM6 doesn't allow you to touch?
I think you should look at the official thread for the ROM you're using and indeed post your questions there AFTER you have read it all. Especially the FAQ on the front page. If it's not answered there I'm sure it is somewhere in there. Oh, and physical is spelt like this and the keyboard is normally termed the hardware keyboard.
This is the forum in question.
Hope this helps,
Hazza
All with Total Commander
I've just gotten my Touch Diamond a day ago and now I'm running Dutty's v2,3a rom, however I've noticed that it doesn't come with Cantonese support. Mp3's etc show *[email protected]()[email protected] instead of the Chinese CHARACTERS.
So can anybody tell me how install Chinese support?
Have a look here
Have Thai support on my Diamond & it works great.
Uhm, thanks but any free solutions?
Anybody else?
I'm not sure this solution has Cantonese support but you can give it a try. If it does not, don't blame me, I don't know Chinese
Also, this is not a solution to have the input things (no IME). You will only be able to read characters.
*Download Asukal's e-china for Diamond.
*Install the .cab. Soft reset.
*Download reloadnls.exe.
*Extract the .exe from the .zip and copy it to your Startup directory (usually Windows/Startup/)
*Soft reset.
*Check if your hard keys are still working. If not, add this registry value (it should already be added with the .cab) then soft reset
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010411
"Keyboard Layout" = "00000409"
*Installing new languages support could make your keyboards messed up with the T9 input and stuck with numeric or symbol (full, compact and phone keyboards are concerned). If so, change those registry values :
Code:
HKCU\keyboard layout\Preload
"Default" = "e0010411" >> "Default" = "e0010409"
Code:
HKCU\keyboard layout\Preload\1
"Default" = "e0010411" >> "Default" = "e0010409"
I'm not sure if the last trick will work and fix your keyboards but it works for me.
Try this post in another thread on this fourm, its for the diamond:
http://forum.xda-developers.com/showpost.php?p=2590632&postcount=6
just follow it step by step and you will have chinese (cantonese) support
@Chenman: I just did that and after a softreset, it hangs @ the Windows Mobile 6.1 screen....hard reset?
Hey Sasimi, did you try the one I sent you via pm ?
Working fine on my diamond, Easy install with no hangups as of yet !
Sasimi said:
@Chenman: I just did that and after a softreset, it hangs @ the Windows Mobile 6.1 screen....hard reset?
Click to expand...
Click to collapse
Did you follow it step-by-step?
It didnt hang for me, but yeah, sounds like you might need to do a hard reset.
chenman said:
Did you follow it step-by-step?
It didnt hang for me, but yeah, sounds like you might need to do a hard reset.
Click to expand...
Click to collapse
Yeah, did it step by step, anyway, I just installed CE-star, which gave me chinese support too, so thanks anyway.
Sasimi said:
I've just gotten my Touch Diamond a day ago and now I'm running Dutty's v2,3a rom, however I've noticed that it doesn't come with Cantonese support. Mp3's etc show *[email protected]()[email protected] instead of the Chinese CHARACTERS.
So can anybody tell me how install Chinese support?
Click to expand...
Click to collapse
Why don't you simply install the Official Chinese ROM for Hong Kong?
This will surely be the best support for Cantonese!
http://forum.xda-developers.com/showthread.php?p=2441695#post2441695
Having just seen an image of the AT&T branded TP2 at engadget, I see they messed with the keyboard layout compared to the HTC original. Other carriers have also tinkered, such as moving the FN key and including or not the Ctrl key.
I've only ever flashed roms before on an Athena (Dopod U1000) and Ipaq hx4700, which didn't have this issue, so I never thought about this before. If I get the AT&T version, will there be compatibility problems when flashing cooked roms for the unbranded version? I know that cdma versions need their own cooked roms. Will it be the same situation for users of the AT&T and T-MO USA versions?
Thanks.
evermore said:
Having just seen an image of the AT&T branded TP2 at engadget, I see they messed with the keyboard layout compared to the HTC original. Other carriers have also tinkered, such as moving the FN key and including or not the Ctrl key.
I've only ever flashed roms before on an Athena (Dopod U1000) and Ipaq hx4700, which didn't have this issue, so I never thought about this before. If I get the AT&T version, will there be compatibility problems when flashing cooked roms for the unbranded version? I know that cdma versions need their own cooked roms. Will it be the same situation for users of the AT&T and T-MO USA versions?
Thanks.
Click to expand...
Click to collapse
The same problem occured on the Kaiser, once Cooked ROM's appear I'm sure someone will make a CAB to set the keyboard layout right for your device. Just install the CAB after flashing each ROM and you'll be fine - put it in your UC / SASHMI script so you never forget .
Dave
Thanks very much, Dave. That's great news.
I think the Hardware Keyboard Layout is defined with that Registry entry:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KeyboardLayouFiles]
For german TP2's it is:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KeyboardLayouFiles]
"07FF"="eT9.Rhodium.0407.kmap.txt"
and for WWE TP2's it is:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KeyboardLayouFiles]
"07FF"="eT9.Rhodium.WWE.kmap.txt"
After dumping the official ROM and making Packages, I found some interesting files inside the IME Engine Western package:
eT9.Rhodium.0C0A.kmap.txt
eT9.Rhodium.040C.kmap.txt
eT9.Rhodium.0407.kmap.txt
eT9.Rhodium.0410.kmap.txt
eT9.Rhodium.0414.kmap.txt
eT9.Rhodium.0419.kmap.txt
eT9.Rhodium.Cingular_US.kmap.txt
eT9.Rhodium.swiss.kmap.txt
eT9.Rhodium.TMOUS.kmap.txt
eT9.Rhodium.wwe.kmap.txt
eT9.Rhodium.wwe_ara.kmap.txt
eT9.Rhodium.wwe_rus.kmap.txt
Thanks animelover! This works in the new 6.5 NRG ROM for my german layout!
In [HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KDBFiles] I changed the entry 07FF to "eT9.HQD_GER.kdb"
while in [HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KeyboardLayouFiles]
I changed the entry 07FF to "eT9.Rhodium.0407.kmap.txt" (as stated in the post above).
I'm not sure if the first step is 100% necessary, especially for other layouts, but it worked for me.
Note for users with the german layout: The kmap file needs to be edited by switching Z and Y in the VK column. My kmap is attached...
Has anyone gotten the T-Mobile TP2 layout to work?
brianb7590 said:
Has anyone gotten the T-Mobile TP2 layout to work?
Click to expand...
Click to collapse
no luck so far
I opened the eT9.Rhodium.TMOUS.kmap.txt from my \windows in notepad, but don't know how to fix it - the ALT key does not work (its called the FN key in the txt file - which makes sense since in Fuze and kaiser, it was FN key) and the CTRL key does not work - the txt file - leaves that as blank.
This is what it says:
___
// Row 5
{0xEC 0xEC 0x00 0x00 0x00 0xff} // FN - 0xEC = FN
{0x11 0x11 0x00 0x00 0x00 0xff} // CTRL
{0xF2 0xF2 0x00 0x00 0x00 0xff} // MSG - 0xF2 = MSG
___
Any ideas?
what did control do on the original tmobile keyboard because now the ctrl key at least works as the alt key i just found out.
hondamx525 said:
what did control do on the original tmobile keyboard because now the ctrl key at least works as the alt key i just found out.
Click to expand...
Click to collapse
Ctrl + C - copy
CTRL+V - paste
just like on a desktop
<post deleted; wrong thread, sry>
on tmobile touch pro2 US with any cooked ROM (Fursion Power or EnergyROM) - the ALT and CTRL are switched on the h/w keyboard - anyone know enough about kmap.txt to be able to switch it out?
would be a great help!
Thanks!
load stock ROM, use Remote Registry to export all settings that have to do with keyboard, load custom ROM, copy registry settings over and your control key should work. If anyone finds the right keys then post so everyone knows the fix.
brianb7590 said:
Has anyone gotten the T-Mobile TP2 layout to work?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=4371210
should ask some of the guys that already cooked ATT official rom and the leaked tmobile rom the keyboard set up should already be in there the should have it
Hi all,
I'm having problems getting my Sweish/Nordic keyboard to work as it should now that I've flashed the NRG ROM.
In my original stock rom the registry entries were [HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KDBFiles] 07FF as "eT9.HQD.kdb" and [HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\Keyboard LayouFiles] 07FF as "eT9.Rhodium.0414.kmap.txt". Withese settings in NRG all that happens is that the FN and Shift keys stop working. The basic characters work fine but any capitals or "special" characters are shot.
Any ideas on what I should try next?
Thanks/McHan
McHan said:
Hi all,
I'm having problems getting my Sweish/Nordic keyboard to work as it should now that I've flashed the NRG ROM.
In my original stock rom the registry entries were [HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KDBFiles] 07FF as "eT9.HQD.kdb" and [HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\Keyboard LayouFiles] 07FF as "eT9.Rhodium.0414.kmap.txt". Withese settings in NRG all that happens is that the FN and Shift keys stop working. The basic characters work fine but any capitals or "special" characters are shot.
Any ideas on what I should try next?
Thanks/McHan
Click to expand...
Click to collapse
You exported the wrong keys. These aren't what is the issue. Download my reg fix for the TMOUS TP2. I forget the exact location, but it is in that reg file.
gehzumteufel said:
You exported the wrong keys. These aren't what is the issue. Download my reg fix for the TMOUS TP2. I forget the exact location, but it is in that reg file.
Click to expand...
Click to collapse
Thanks gehzumteufel. Naive question, but do you have any idea where I might find the correct registry values for my Nordic keyboard?
Thanks/M
Hm, I had hoped that changing the [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD] "CurLang" value to 414 (which was the local language I had on the original SW-KB) would do the trick. But no, no such luck The key that's in the T-Mobile"fix" but which I don't have now is "LayoutID"=dword:00000213. Any idea what this does?
Norwegian keyboard layout file
Hi, thanks to the guides on here, I made a norwegian layout file for the Rhodium. It worked perfect with the NRG 6.5 ROM.
It is attached, either copy it to the windows folder using Total commander and then change the registry value to "eT9.Rhodium.wwe-nor.kmap.txt" or simply rename the original wwe file first and then copy this file in using the standard name (eT9.Rhodium.wwe.kmap.txt) to avoid editing the registy.
Hello to everyone and thanks in advanced for your help ...
I would like to know how can I return to the Windows Mobile Old keyboard ... the one that has handwriting posibility .... I try several roms ... and I like them but I don't like the HTC new keyword ... I really prefer the old version because I think is fast for me writing than tiping ...
Actually I'm using Itje's Touch-IT v16 with winmo 6.1
Thaks a lot ....
The Maxx
This transcriber cab might work for you.
edit: If that doesn't work, or if you'd just like the entire OEM keyboard, here you go.
thanks ... but both cabs don't work or maybe I don't know how it work.
sfreirez said:
Hello to everyone and thanks in advanced for your help ...
I would like to know how can I return to the Windows Mobile Old keyboard ... the one that has handwriting posibility .... I try several roms ... and I like them but I don't like the HTC new keyword ... I really prefer the old version because I think is fast for me writing than tiping ...
Actually I'm using Itje's Touch-IT v16 with winmo 6.1
Thaks a lot ....
The Maxx
Click to expand...
Click to collapse
Look for Calligrapher from phatware. It's the advanced version from the built in one.
jackleung said:
Look for Calligrapher from phatware. It's the advanced version from the built in one.
Click to expand...
Click to collapse
Thanks I looking for it rigth now .... anyway Is possible disable the input way that the manila's rom has? maybe by regedit and return to the windows mobile original?
I just donwloaded the .cab file, but I think is not what I'm looking for ... I'm want to disable the HTC input method and use the old that came with windows mobile the one that has block recognizer, keyboard, letter recognizer and simbol pad. Please if some one knows how can I do that it will be very helpfull for me.
BR
The Maxx
sfreirez said:
I just donwloaded the .cab file, but I think is not what I'm looking for ... I'm want to disable the HTC input method and use the old that came with windows mobile the one that has block recognizer, keyboard, letter recognizer and simbol pad. Please if some one knows how can I do that it will be very helpfull for me.
BR
The Maxx
Click to expand...
Click to collapse
Here's another stab at it. I've cabbed this up. Install it and soft reset. Let me know how this one works out.
TaurusBullba said:
Here's another stab at it. I've cabbed this up. Install it and soft reset. Let me know how this one works out.
Click to expand...
Click to collapse
Thanks ... Downloading ... I'm going to try to use it with the Ijte's LEo 9 ROM. Thanks for your help ...
The Maxx
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
Give this one a try. Install the keyboard first, then dictionary... soft reset.
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
I never find how to change layout for Microsoft software keyboard but if your rom use EZinput software keyboard, you can change the layout with that:
Go to HKLM\Software\Tegic\et9
Change the value of DefaultLanguage
0109 -> qwerty
010C -> azerty
0107 -> qwertz
There is also 0110 and 010A avalaible but I don't know for which layout it is so you may have to try yourself
Click to expand...
Click to collapse
I do not know if nordic is supported and maybe there are other value than this ones but it is all that I know now...
Not Working
Hello again Taurusbulba... The cab don't work either .... I'm using the Ijte's TOUCH IT LEO 9 .... I did the follow: (1) Download the cab (2) copy to sd (3) install from SD (4) soft reset ... (5) Open word, excel and contacts and I have the same HTC Keyboard .... (6) try to setup the keyword from Start/Settings/Personal/Input ... and only have Touch Input....
Plese help me ...
Thanks a lot ....
The Maxx
strix75 said:
if you run a custom rom is it possible to change the software keyborad to nordic layout?? I have the smeberg cab for the hadeware keybord. But missing the nordic keybord in the soft keybord. So please help me out.
Regards.
Click to expand...
Click to collapse
I removed your last post because you double-posted the same question. I answered you in post #10. Did you not see that? Try it out and let me know if it works.
sfreirez said:
Hello again Taurusbulba... The cab don't work either .... I'm using the Ijte's TOUCH IT LEO 9 .... I did the follow: (1) Download the cab (2) copy to sd (3) install from SD (4) soft reset ... (5) Open word, excel and contacts and I have the same HTC Keyboard .... (6) try to setup the keyword from Start/Settings/Personal/Input ... and only have Touch Input....
Plese help me ...
Thanks a lot ....
The Maxx
Click to expand...
Click to collapse
Well that's not good. I'll keep my eye out for another OEM Microsoft keyboard, but I'm running out of resources. No guarantees I can find one that'll work for your device though.
Hello!
This may be an odd request, but I need a cab file that will change my phone's layout to the P4350's
What happened was, I flashed a ROM called f1rick's ROM v3.6, awesome ROM by the way! But I'm guessing it is for a T-Mobile Wing. I have an HTC P4350...
What the issue is, some keys are swapped around, for example the "atsign" is suppose to be Fn + Q ... but Fn + Q = (
I now have to Fn + L (which is actually for "=") to get the atsign sign!
The last thing I want to do is go performance ROM hunting and hours of flashing, so is there a cab file I can apply to correct the layout?
Thanks