Hey everyone I just flashed to the Touch-IT 4.41 Rom and it looks great props to itje.
I put the HardSPL but I forgot to install the 3 .cabs with it.
Now whenever I try to sync it to my computer, it doesnt sync.
Now im trying to restore the stock Wing SPL/Rom and its not letting me.
I tried in boot loader mode and regular booted up, with no luck!
Also I read in another post that I need to use USPL, but its stuck on step one.
Anyone have suggestions?
By the way I'm using Windows Mobile Center
Related
How do I delete this post?!
* UPDATE: Either I'm just really tired or I am going blind. I fixed my problem, but now I cant seem to be able to find a way to delete this post...
I got my Cingular 8125 about a week ago, it's been a dream! I LOVE THIS THING!
Tonight I decided to update the ROM. I got it with 1.8 or something really old like that so I thought updating would be a good idea. I went to the HTC site an downloaded the latest ROM (2.25).
As I am a mac user, I fired up the old PC and updated. But before I did, I installed SPB Backup on the 8125 and backed everything up to my miniSD. Update went fine. Worked like a charm. I went to restore my files and thats where it all went to hell!!!
I made the mistake of restoring ALL of my files and settings. It seemed fine when it was done. the 8125 asked for my password, and as I finished typing it in, the 8125 rebooted without notice. The Cingular screen came up, loaded fine. Then the Windows Pocket PC screen came up and then the top bar with icons came up. That was it. Now it just sits there, nothing else loads. I can put it on stand by. But nothing else happens. No today screen, no phone, no signal, nothing.
I tried to connect it back to my PC but ActiveSync cant mount it. I tried the Wizard ROM update installer, but it said that the device couldn't be found. I tried connecting it to my Mac with Missing Sync. It asked for a password, which it has never done before (which seemed promising) but after I typed it in, again, no device was found.
Now the poor thing is just sitting there on my desk
Is there anything I can do to get it up and running again? Is there a way I can get one of my machines to recognize it and wipe it clean so I can start fresh???
Please help! I bought this phone refurbished, so I dont know if I will be able to get it replaced. Any help would be greatly appreciated!!!
Was this device CID unlocked? Did you try going to the bootloader mode (Hold camera down and press reset while holding camera button, rainbow screen should appear) and then flashing it with your desire ROM?
If it still don't work, you might need an SD backup image of a rom. I've been trying to look for one but the only think I found is an image of a dutch language ROM. If I do get one I'll give you a PM.
Clem
clemsyn said:
Was this device CID unlocked? Did you try going to the bootloader mode (Hold camera down and press reset while holding camera button, rainbow screen should appear) and then flashing it with your desire ROM?
If it still don't work, you might need an SD backup image of a rom. I've been trying to look for one but the only think I found is an image of a dutch language ROM. If I do get one I'll give you a PM.
Clem
Click to expand...
Click to collapse
Hey thanks Clem! I did solve my problem, but now I have a new one. I HATE 2.25!!!
So if you do get your hands on an older ROM, I would be forever greatful!
Thanks for responding!
Here is the link for the 1.8 Cingular ROM
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
I hope this works for you.
You think you can save that 2.25 image to your SD card coz I've been looking for an SD image this is ths instructions...that is if you don't mind.
ftp://xda:[email protected]/Wizard/DumpROM/How_to_DumpROM.txt
and here are the files needed
ftp://xda:[email protected]/Wizard/DumpROM/ntrw_189.exe
ftp://xda:[email protected]/Wizard/DumpROM/psdread.exe
ftp://xda:[email protected]/Wizard/DumpROM/romupdate_115.exe
This will also create you a backup of 2.25.
Thanks
clemsyn said:
Here is the link for the 1.8 Cingular ROM
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
I hope this works for you.
You think you can save that 2.25 image to your SD card coz I've been looking for an SD image this is ths instructions...that is if you don't mind.
ftp://xda:[email protected]/Wizard/DumpROM/How_to_DumpROM.txt
and here are the files needed
ftp://xda:[email protected]/Wizard/DumpROM/ntrw_189.exe
ftp://xda:[email protected]/Wizard/DumpROM/psdread.exe
ftp://xda:[email protected]/Wizard/DumpROM/romupdate_115.exe
This will also create you a backup of 2.25.
Thanks
Click to expand...
Click to collapse
THANKS CLEMSYN! I'll give them a try! YOU ROCK!
Hi... I installed touch-it on my Wing but now I can't uninstall the rom, and I want to go back to wm6.1 clean...
I've been trying diff things but it gets stucked at 1% and then it restarts...
I've also read some other posts regarding installation but there's nothing about downgrading... I have the original RUU for my Wing and also the original RUU with wm 6.1, I've tried to downgrade under Vista and nothing and also under XP and it's the same story... I don´t know if I have to download and run on my Wing some .cab's or something to remove the ones I installed when upgrading to Touch-It...
Any ideas?
Ty!
Woohoo I was finally able to restore my Wing...
If you have the same doubt... U need to get an update of the ROM (I used the original update ty iPhone iWing for your thread "http://forum.xda-developers.com/showthread.php?t=437630" there u can get the files)...
Then just softSPL to return to original SPL (I had to get rid of yang4.xxxx) and flash the rom... and well there you go...
i Download the HTC Fuze ROM Update- Version 5.11.502.2 WWE
after i flashed it and booted it, initial setup was taking place... it said it was setting up touchFLO. everything looked good.
until...
it just rebooted!
and it keeps cycling that way. it never gets to load windows.
i have read that other people have been having trouble with touchflo after the update... but now i cant even get windows to load.
ive been trying to find solution all day. about 15 hours. i cant even flash another rom into it. i cannot hard spl. anyone?
Did you install Hard Spl 1.40 before you flash the device ??
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Read the dummies guide http://forum.xda-developers.com/showthread.php?t=505377
Post anything further in that thread, no need to create new threads.
haqx said:
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Click to expand...
Click to collapse
connect ur phone in active sync mode with ur pc.
then run the HSPL olines wrapper.
ull enter a tricoloured screen which will say 1.56.OLINEX.
disconnect and reconnect ur USB cable.
Run the EXE in the downloaded ROM.
ull be ready with the new rom..
this is assuming u have Win XP. for other OS u need to dnload drivers from the thread mentioned in the above post.
Generally speaking if you are experiencing discolourization it is because your SPL is incorrect.
Check your SPL in bootloader. Then follow this guide. Any future queries regarding flashing should be posted in that thread and myself or others will help you. If no one responds PM me and I'll respond next time I'm online.
Thread closed
Ta
Rick
Hi there, I installed "RUU_Rhodium_HTC_ARA_1.19.415.1_Radio_Rhodium_3.44.25.27_Signed_Ship" on my phone, and now it is stuck on the reboot screen, and it keeps rebooting constantly. it won't boot anymore.
I tried to install a different Rom, and it still won't boot.
I tried the hot fix rhodium radio 3.46.
I tyried SPL loader. no luck
Any help is greately appreciated.
Do you have Hard SPL?
Have you tried re-flashing the stock ROM for your device, not just "another" ROM?
Dave
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
ericsson12 said:
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
Click to expand...
Click to collapse
Can you boot Windows Mobile? If not, can you re-flash your carrier's ROM (hopefully they have a Ship Exe) whilst in the bootloader (see the Rhodium wiki pages)?
Ta
Dave
Have you tried Mtty?
Mine got stuck at bootloader a couple of days ago, because my computer hang in the flashing.
Second time Mtty saves me
I am able to boot into windows now, but i am unable to load the Arabic ROm.
Help please
I've had something similar.
But my phone kept reinstalling itself every time it booted.
Now I know this was a diamond, but I think it might help.
Maybe someone else could look at this as well and give his opinion about it.
The thread about this case is here http://forum.xda-developers.com/showthread.php?t=493131
Hope that helps
i had this problem.. the only way that seemed to work with me is flash stock spl then flash rom.. once the rom is flashed succ run the arabic localization.. finish it n the re-flash hspl.. thats is the only way around it.. i think there's a conflict between the ara setup n hspl.. dont know if it'll work with u, but did with me since my device accepted the rom in stock spl.. hope it works for u ;-)