i Download the HTC Fuze ROM Update- Version 5.11.502.2 WWE
after i flashed it and booted it, initial setup was taking place... it said it was setting up touchFLO. everything looked good.
until...
it just rebooted!
and it keeps cycling that way. it never gets to load windows.
i have read that other people have been having trouble with touchflo after the update... but now i cant even get windows to load.
ive been trying to find solution all day. about 15 hours. i cant even flash another rom into it. i cannot hard spl. anyone?
Did you install Hard Spl 1.40 before you flash the device ??
Related
Well, it seems that my BA finally broke (WM5 anyway). It happened when i was flashing back from a test rom to ivans latest version, i flashed, booted up and got to the wight screen, and stayed there... for 30 minutes. undettered i then tried every WM5 rom i could lay my hands on, but to no avail. in final desperation i downgraded to wm2003se and lo and behold it worked!
Anyone got any idea how to get wm5 working again on my ba?
just reflash back to WM5
thi is a rare bug, which occures, and the fix is downgrade to 2003 and then upgrade to WM5
done that, twice
have u tried to format your extended rom ?
there is topic out there, but show how to do it.
u could give that a try.
reflash everything including radio and ext rom, use radio 1.13, after flashing WM2003 try to flash WM5, please post the result. If this does not work i think it is a bootloader issue, if you can get the same version of boot loader and flash it maybe all will work.I am too scared to mess with bootloader yet.
http://forum.xda-developers.com/viewtopic.php?t=46867
Does anyone have command reference for BA bootloader trough mtty
[curse]
**** **** **** **** **** **** ****
[/curse]
right, i ran the mtty thingy, and reformatted the flash, i then went back to 2003se and storage and extrom were working , but then when i tried to go back to wm5 i kept getting a model id error even though i used xda3nbftool.exe to set the same one as in deveicedata.txt but to no avail, when i gave up to go back to wm2003se i found i couldnt exit bootloader! so i tried connecting again via mtty, it all went fine, ran the commands again etc but still stuck in bootloader. out of desperation i took out the battery, but now to my horror the phone wont even turn back one (yes, i've put the battery back in ). has anyone got a clue how to fix this?
Many thanks in advance....
edit - I just tried a bit of percussive maintanace on it and lo and behold... it began to boot
The only problem now is that the boot screen is f*cked up and i get a model id error whenever i try to upgrade roms (even the official orange shipped extract with no modifications wont run )
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
@Midget_1990
edit - I just tried a bit of percussive maintanace on it and lo and behold... it began to boot
Click to expand...
Click to collapse
"Percussive Maintenance" rarely fails. Nice term though - I'm sure I'll quote it.
Do post a link to the mtty command reference when you get it.
Cheers
- it just sounds better the 'i threw it at a wall'
I tried flashing WM6 on my QTEK 2020, but I had the wrong version. I begun the upgrade having it on bootloader and after a while an error about updating radio occured. Now, my PPC powers up, but it gets stuck on the beginning with the "QTEK" logo with the clouds and the blue led that indicates the bluetooth is activated. Neither soft nor hard reset does anything and I can't flash the original rom through bootloader (I can boot the PPC in bootloader).
Does anyone have any idea please?
If you posted this in the Qtek2020 (Himalaya) forum, you might get a quicker response.
Thread moved out of the BA section
Maybe you should try reflashing. Just flashing a new ROM and then just a radio might do the trick.
How did you flash? With the No_ID?
And what were you trying to flash? A BA ROM while you have a HIMA?
OK!
It's ok now! I flashed the WM6 Rom having my PPC on bootloader and everything's fine!
Its very good to hear that..btw which rom did u flash before and what have u flashed now
I really can't remember what the previous rom was, but it was for another brand! It was stupid to flash that one! The one I have now is this:
http://forum.xda-developers.com/showthread.php?t=332945
But I have a problem. The PPC restarts randomly even if I do nothing with it. I haven't overclocked it.
It is not got sign, if your PPC restarts randomly. Better you flash it again.
I flashed again the ROM from "Himalaya Mobile 6" category and the following link:
http://forum.xda-developers.com/showthread.php?t=332945
but my PPC keep restarting and one more thing, WM6 kills my battery! I've got to charge it every day, before I charged it every 3-4 days. Does anyone have any idea what I should do? Can I put WM2003 now?
Hmmm... I'm using the 7c ROM from that page with no problems at all.
Did have some issues with some older apps and the config for TomTom when I switched to WM6, but not anymore.
What do you have installed, and what versions?
I have installed nothing but WM6!
I just flashed my Diamond with the: RUU_Diamond_HTC_NOR_2.03.409.1_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I'm an norwegian that's in the US studying, so they only gave me the norwegian version. Anyways, everything worked fine until flash, but now my phone refuses to register on the network (AT&T)!
Took the sim-card back to the at&t nokia phone, worked the first time...
I really wants to use my Diamond instead of the crappy nokia, but it would be a shame to downgrade to 1.93 (which worked just fine...).
Someone, please have a solution for me?
simply install a new radio....try 1.00.25.07 that seems to be the only quadband radio..
(you have to flash an hspl before)
It's stuck on 0% and won't continue... Tried several roms :-/
no service?????
is there a soution to this no network problem
THERE IS A CROSS IN THE RECEPTION BAR AND WHEN YOU DIAL OUT IT SAYS "OPERATION FAILED"
any replies appreciated
Quite bad if the official RUU more or less bricks the device, at least turns into just a little computer
It screwed up my Diamond aswell The gprs is completely dead, been up all night trying to fix it, several hard resets etc, nothing helps... if it was a cooked rom I could tolerate it but official roms screwing up our phones this easily pisses me off.
Mine worked again, with the old 1.93 rom!!
What the hell did they do to 2.03? I suppose the radio rom is different at least... But I couldn't change to the old radio when I had 2.03, tried using the HardSpl...
Is it possible to flash _once_ with everything from 2.03, but the 1.00.25.05 radio (which is the one from 1.93)? Doing it sequentually doesn't work.
So what I did, as the final solution:
Flash with stock 2.03 rom
HardSPL
Flash with 1.05.25 radio
Works perfect!
Hmm i did the other way round with my o2 XDA Diamond (1.93 Stock)
1. Hard SPL
2. New Radio Rom (1.09.25.23)
3. 2.03 official Ger HTC Rom (without vendor lock)
works great as well
I've seen this issue a couple of times too. With 1.93 as well as with 2.03. Did not figure out what was the cause but never had a chance to bring the device back to life with some uninstallation or radio flash. I always went back to the SPB Backup from the night before it stopped working propperly.
I dont' know if this is the problem of onkolog rom or just the way i flash my phone.
First i use the old rom of davideuck Davideuck_V-7, CE OS 5.2.20769 on 29,March . I then got trouble with battery drained with this rom when i used SPB 3.0.
I try to update to new 6.1 rom of onkolog on 1, May
This is what i did.
My phone was on and connected to my PC. I then run HardSPL 1.56 successfully.
The phone was on again and i run the wrapper file in the same folder with onkolog rom. It run smoothly but when it recognized my O2 network it told me to be restarted after 5 seconds and when the "htc" words appear my phone hang.
i need to do a soft reset and this time it worked.
I then tried to install flip it. It required to restart after install and this time i got hang again.
I install htc Tweak and use it soft reset, some times it worked sometimes my phone hang and i need to do soft reset.
The same problem appear when i used A-A reset software.
I then decided to go back to early version of onkolog 6.1 rom (used older version of hspl) on 1-April and still got the same problem.
I tried to reflash with uspl but still stucked with usb driver.
Can anybody tell me how to show this problem . I really like the idea of onkolog but maybe he is too busy to answer me.
Hi,
I've just upgraded to a new Dutch rom, but since then I only have trouble.
I get different colours (like drivers are not loaded), it keeps getting stuck or resets itself, and nothing helps.
I've tried to put on a different rom, with succes, but I still have the same problems.
On startup, however, I see the right colours.
I also put back the latest original ROM, but no luck...
Can anybody help me?
guessing you have hspl 1.14 installed
Yeah, I reinstalled that, as one of the latest things I did.
The problem you describe happens when you flash a 1.56 based rom with 1.14 HSPL. First flash a stock 1.56 ROM (a new SPL is then flashed as well) or use the new HSPL. Then you should be fine. So no, it's nor corrupt!
For more info, read crackwhore's guide (sticky)
Well, I'm trying to do so now, but it keeps getting stuck at 0%...
Does it matter I have an NLD-version, and not a WWE?
Update: I cannot get a proper connection via activesync, and through the bootloader it stays at 0%, and after a while the update utility says no.
Update 2: ah, thanks to troubleshooting, it looks fine!
THANKS!