Related
Blue Angles & Magician got a crippled Bluetooth profile.
There's no Dial Up Networking client Profile, so i can't use any Bluetooth cellphones as dial-up modem.
Is there any Bluetooth patch to enable DUN Profile so i can use my CDMA/3G cellphone as bluetooth dial-up modem?
I wondered why HTC crippled the DUN profile on Blue Angles & Magician (Himalaya has it), because GPRS connection is a joke compared with 3G.
i need the same for a XDA2i as i wish to use my nokia 6630 as a 3g modem or the XDA2i
anyone know how we can add DUN to our bluetooth
Thanks
John
i need so
regards
here you can find how to add Ｂｌｕｅｔｏｏｔｈ Dial up Network Client to Blue Angel:
http://asukal.seesaa.net/article/1031857.html
THANK YOU
I have made that that your you say and it finally exits that profile, but I am not able to establish a connection per gprs, as you have made it your
thank you
Did you get this to work, As i did not work for me on a XDA2i
John
to work?¿?
Half solution, but no goal
Hi,
I have add a new key in the registy off my PDA2K:
\HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Connection Wizard\AddIns\Partner with a cellphone
and inside:
REG_SZ "Description" value "btrez.dll,29030"
REG_SZ "Dll" value "btwizardprofile.dll,3"
REG_SZ "Icon" value "btrez.dll,29087"
REG_DWORD "Order" value 100
REG_SZ "Title" value "btrez.dll,29029"
Soft reset ...
Now, when open the "new connection" in BT manager, I can see the new profile, run it, find my Nokia 6630, pairing .... but wizard end witch an error because ... I have something else to do but :?:
Sorry for my poor english
Bluetooth Manager -> New -> Explore a Blurtooth device -> then select your mobile phone -> then you see a profiles, supported by your mobile phone -> select all or only "Dial-up networking" -> finish.
After this in BLuetooth My shortcuts you can see icon like "<your mobile phone name>: Dial-up networking". Double click on it, and then you can see a list of connection - press "New connection..." select modem "Bluetooth Dialup Modem" and then fill all other fields, as needed for GSM network on your mobile phone. After you done with making new connection, you must click on it (in list of bluetooth connections).
ValeraVi said:
Bluetooth Manager [ok] -> New [ok] -> Explore a Blurtooth device [ok] -> then select your mobile phone [ok] -> then you see a profiles, supported by your mobile phone [NO,I can't see DUN, why???] .......
Click to expand...
Click to collapse
With DELL X30 I can see the DUN profile on my Nokia 6630 ...
2 Magellano
Is you copy BTWizardProfiles.dll to you pda2k as said in http://asukal.seesaa.net/article/1031857.html and soft reset? if yes, then, sorry, i don't know... because for my siemens s55 all work well
ValeraVi said:
2 Magellano
Is you copy BTWizardProfiles.dll to you pda2k as said in http://asukal.seesaa.net/article/1031857.html and soft reset? if yes, then, sorry, i don't know... because for my siemens s55 all work well
Click to expand...
Click to collapse
YES!!! Now it's OK
Thanks a lot
Where is the article
Has anyone got another link to this article? It doesn't seem to be available anymore.
Alternatively, can anyone tell me how to add the DUN client.
thats excelent i now have a 3g XDA2i. well i do as i am using my nokia 6630 on orange as a 3g bluetooth modem. i also have a orange trial of 1GB per month for 3 months. so i am taking the piss out of it and my XDA2i is constantley connected to my 6630
Thanks to everyone on here for help with this, its excellent
John
Hi there,
I am not sure how to get this to work. I have downloaded the zip file, uncompressed it and copied the folder with all the uncompressed contents to my XDAiis. What do I do next?
Please help. Many many thanks
Fiona
Only BTWizardProfiles.dll should be copied into windows fold
fionawatson said:
Hi there,
I am not sure how to get this to work. I have downloaded the zip file, uncompressed it and copied the folder with all the uncompressed contents to my XDAiis. What do I do next?
Please help. Many many thanks
Fiona
Click to expand...
Click to collapse
I am from http://asukal.seesaa.net/article/1031857.html
PLS do not copy all of downloaded files, only BTWizardProfiles.dll should be do. If you copied all of them, the Bluetooth will not work!
Only BTWizardProfiles.dll !!
I uploaded BTWizardProfiles.dll here again. (ZIPED)
Guys! Good news for you!
i made cab file of the Bluetooth Patch Ver,3900 with Blue Tooth Dial up network client service for Blue Angel(Maybe on Alpine also works,but no tested)
Just tap it on Blue Angel to install it and make soft reset ,you can patch to BT3900 and get Dial network client services with one action!
You can download it from
http://www.asukal.jp/BT3900DUN.CAB
But i am not sure BT3900 Patch is better than default one.
PLS do it with your own risk!
Enjoy it!
why I am not able to connect myself to vodafone with this patch, and the others, how you make it
thank you
BT3500+DUN client
ive found BT3900+DUN Clien was some small troouble last night,
The device will have been awaken alternative automaticaly, even i never touched at all.
So i am wonder which patch is better for Blue Angel so i made New cab with BT3500 and DUN client service.
Following is the DL link
http://www.asukal.jp/BT3500DUN.cab 4MB
You can patch on to the BT3900DUN.
Mr.miguelromerom>i made those cab with the CAB Manager.exe
Opened Original Patch cab file and replaced with another BTWizardProfiles.dll in that cab.
Trouble on you, what device you are using? i just tested Blue Angel.
Updated version of http://forum.xda-developers.com/showpost.php?p=1156153
Modifications:
Fixed mail body/mail attachments errors.
Default Crossbow theme: Remake.
Net.CF: Fixed errors. Upgraded to Net.CF2.SP2. Managed V1 libraries (Microsoft.WindowsMobile.Configuration Microsoft.WindowsMobile Microsoft.WindowsMobile.Forms Microsoft.WindowsMobile.PocketOutlook Microsoft.WindowsMobile.Status Microsoft.WindowsMobile.Telephony) imported from WM6 SDK.
Phone application imported from AKU 3.3 (smartdial still works). Used a bit different phone skin (gray molski.biz). There is attached gray smartdial - compatible with phone skin.
SqlCeSe.sys.dll: imported from WM6 ROM. A bit newer version than used in WM5.
Deleted all predefined favorites. They are not mine favorites.
Corrected Sim Toolkit.
Added Windows Mobile Updates for Daylight Saving Time
Reorganized "Programs" and "Settings". Removed ActiveSync (still available via Comm manager), InternetSharing and ModemLink - available in Settings/Connections. "Backlight" applet moved to "Personal" tab. I think, it is the most often used applet. Removed "Button Lock" - use: Settings/Personal/Buttons/Lock tab instead.
Modified today items order, date plugin set to single line.
PIE: some tweaks. Mostly performance tweaks. Cache limited to 10880kB - the rest of RamDisk can be used for storing mails.
Startup items removed from \Windows\StartUp folder. They are launched from [HKLM\init]. This saves some vital resources.
MSN (in the ExtRom folder) - slightly modified. Other ExtRom CABs are nearly the same. All CABs are disabled by default. Modify \ExtROM\cfg.txt to suit your needs.
Modified some graphics (smallest ones imported from WM6) and sounds. Removed fatutil.dll.0409.mui
[*]COM6 set as GPS intermediate port (look at GPS applet). Don't use COM6 for other purposes unless you undefine that.
Maintenance:
Remove (by hand) \Windows\StartUp\Camera_Detect.lnk.
Known problems:
Button SpeakerOn button doesn't work. Press and hold green phone hardware button instead. Probably I'll not fix it in the nearest future.
Changing themes: After changing theme and reverting back to the default, BaseHue is not restored. I think it is WM5 error (there is somewhere hardcoded default value). To restore: set [HKLM\Software\Microsoft\Color] value BaseHue to b0d57e (hex).
Net.CF: Resco keygen and some other poorly written applications expects to use Net.CF.2 without any service pack. Ask software vendor.
Ringtones are not clear. IMO they have to be loud. They are encoded to have files as small as possible.
Main update files:
Update: Rapidshare
Mirror: MegaUpload (thanks to blackflagsvn)
Mirror: SendSpace (thanks to jakubd)
Mirror: micmeo (thanks to micmeo)
Mirror: isis2.uitm.edu.my (thanks to bizkut)
Misc files:
Reenable sound on screen taps: ClicksClacks.cab
Updated version again - previous version was not working: A bit customized, simplest (sorry, wmpaint is my friend) version of gray SmartDial_V2.5 Uninstall previous version of smartdial before. Other versions (Greek, Hebrew, Cyrillic) you can find here: http://forum.xda-developers.com/showthread.php?p=1100370#post1100370
If you think, that you have to reinstall sms_alert_fix - try this. Updated version: SMS_alert_fix_patch_1, uses InitLauncher. It is Ok to install over previous version
Network update. It is part of next release, but I believe it can resolve some problems with wifi connection. http://forum.xda-developers.com/attachment.php?attachmentid=37063&stc=1&d=1176410905
Thanks:
Many thanks to: helmi_c, mamaich, bepe, logout, tuatara, xplode, saman and supporting user. Happy Easter.
Tips:
Turn on WiFi: Do it only once after soft reset. This procedure will load WiFi driver into system drivers. Start Comm Manager. Select from menu: Settings/WLANsettings. Tap "Turn on WLAN". If there are any WiFi networks available - device will try to connect to. Provide proper parameters (network name, authentication, encryption, keys etc). Probably device would not connect. Go back to "Comm Manager". Turn WiFi off. Since that use only Comm Manager to turn WiFi on and off. There is easy way to recognize if it is required to load WiFi driver, or it is enough to turn on. Look at todays wireless plugin. If there is listed WiFi in any state - there is no need to load driver tapping "Turn on WLAN". Resolving this issue is not easy. If you are interested - read this: http://www.teksoftco.com/forum/viewtopic.php?t=194
COM ports: There are free only COM7 and COM8. COM1 - serial (bottom connector), COM2 - serial_cmd (to send AT commands to the phone) (I'm not sure), COM3 - IrDA, COM4 - BlueTooth, COM5 - BlueTooth DUN, COM6 - GPS intermediate driver, COM7 - free, COM8 - free, COM9 - Virtual COM (virser_data).
NetCF, WiFi and BT GPS together - WiFiFoFum. Setup: add new bluetooth device. Follow pairing procedure. Check "Serial port" service to use from this device. Select "CommPorts/NewOutgoingPort". Use COM7 or COM8. Goto GPS applet (Settings/Connections/GPS). Select "Hardware" tab. Enter previously selected port COM7 or COM8. Verify "Programs" tab - COM6 should be selected. Ok. Turn on WiFi (see previous tips), turn on BT, start WiFiFoFum. Goto Options/GPS. Select COM6 (the same, as selected in GPS applet in the "Programs" tab). Enjoy.
Devices randomly wakes up if BlueTooth is on: this is well known issue and nobody is working on it. Look at this: http://forum.xda-developers.com/showthread.php?t=267389 If it is a problem for you, look for something that can lock device after WakeUp. For example: http://forum.xda-developers.com/showthread.php?t=261277
Back up
Hi Baniaczek,
Great to see another release from you and downloading it rite now.
My question is:
Can I back up all my data (using sunnysoft backup manager), upgrade my IIs with this new rom, and then restore my data from the older rom?
Just cant be bothered re-installing all the softwares needed.
Thanks
joseph.sapri said:
Hi Baniaczek,
Great to see another release from you and downloading it rite now.
My question is:
Can I back up all my data (using sunnysoft backup manager), upgrade my IIs with this new rom, and then restore my data from the older rom?
Just cant be bothered re-installing all the softwares needed.
Thanks
Click to expand...
Click to collapse
No. There is a lot of modifications in registry. Restoring backup you will restore ald values. I thin - all.
hic i will lost a day to reinstall software but i must ,downloading...
thank baniaczek very much
no need for SetOperator anymore?
arnarn911 said:
no need for SetOperator anymore?
Click to expand...
Click to collapse
I can't find any reason to use SetOperator.
If anybody needs it - please use SetOperator from any previous update. It should work.
oops sorry double post... just flashed the firmware... am restoring contacts now.... this is using apache wifi driver right?
thanks
and happy Easter
OMG wifi will not connect...
....great job
btw, who can email micmeo so that he can upload the rom to his website... downloading from rapidshare takes years...
happy ....
downloading...
thank you very much
Great baniaczek!
I'll install now! thank you!
http://forum.xda-developers.com/member.php?u=251591
Is it okay not to run EXTROM? I noticed this EXTROM does not have DelCDetect. Is it not important? Thank you very much.
Thanks Baniaczek I'm going to download
Great work!!! i am testing one hour and all is ok, ROm is very fast. Thanks
will test ocer easter and provide feedback! Thxs in advance!!!!
MS Voice Command 1.6
Thanks a lot baniaczek, much appreciated.
Did anyone try MS Voice Command 1.6 on this ROM ? Is it functioning properly ?
In a previous version,Voice command would still use the microphone instead of the bluetooth handset.
Cheers
Chris
downloading
happy to download this new version
a can't turn on BT
Great!
Thanks!!!
Downloading!
Guys
I am having real problems getting my GPS to talk to my XDA11i . the two devices appear to talk to each other ( flash furiously) but tom tom doesnt recognise it.
Bluetooth manager confirms there is an active connection.
I believe that the BT profile is not set up correctly.
I can go to BT settings and make a new profile , selecting serial transfer etc and then give the profile a name , BUT , each time I select the profile whilst the access permissions are still as set , when I open the services tab no services are selected ! despite selecting it when the profile was set up ?
Any thoughts here ?
Astro1
Go to BT parameter -> services -> serial port -> options
Write down IN/OUT port number, report the OUT port number to you GPS software.
If pb still exists, try to use "Franson GpsGate" or NMEA as connection within gps software.
Tried that !
Hi NewbiePDA
Been there and tried that , the outgoing port is port 6 and in tom tom 's configuration choices the choice of port 6 is the only oje that seems to get any where ( activity from the LED on the GPS unit ) all other port choices given turn off the GPS.
Ive got a copy of franson gpsgate but got nowhere with it ,
It has to be a simple configuration problem !
I have set up a spp profile in BT settings ( and called it tom tom ) I have ticked the serial connection and then Enable service box then closed down ( hit ok). Upon re opening the profile serial port choice is no longer chosen ? any ideas ?
Best Regards
Astro1
Hi Astro1,
I think that creating spp profile is unnecessary, my procedure is as below:
1) Pair you devices
BT -> BT manager -> tools -> pair device -> add
browse you BT devices then you should see you gps icon appear, click on it, then type you password to pair, usually is 0000
2) back to BT manager, choose "new", choose discover a BT device, again, you should see you gps device, click on it, normally you get spp service, just follow the step by clicking "next"...
If you can't see any services available then turn off you BT gps device, turn off you Xda2i BT, soft reset, then turn on gps, back to step 2)
3) If pb remains, probably it's due to tomtom's bt stack, try rename BtCoreIf.dll BtSdkCE30.dll (in \windows folder) to others name, or delete them.
Hope that helps.
re name or delete
Hi Newbe
I am trying to delete or rename the two files you note , I have seen this on other sites as well .
Like you XDA11i says that the files are in use and read only / archive /hidden or in use etc.
It will not let me touch them !
Any ideas of a file manager or software that will let me work on them ??
Astro1
Astro1 said:
Hi Newbe
I am trying to delete or rename the two files you note , I have seen this on other sites as well .
Like you XDA11i says that the files are in use and read only / archive /hidden or in use etc.
It will not let me touch them !
Any ideas of a file manager or software that will let me work on them ??
Astro1
Click to expand...
Click to collapse
download and install gpsdash2 and in the connection settings click on auto config, it will find you gps receaver ad set itself up, this will also give you the correct bt settings, it will show you if everything is working okay. and some cool features.
i had to do this with my jentro bt unit
Hi Skeevee
Ive tried that one too .
GPS gate checks trhe ports and the blue led on the Bluetooth GPS unit flashes furiously ( as if they are talking ) , but GPS gate reports unable to find GPS ???
This is loosing me , it seems to me that the two devices are talking but that there is a comms / set up problem .
TT6 tries to talk to the GPS as well but gets no where ?
Astro1
Problem: when I connect the HTC with my portable pc, only internal sites are accessible..
The only difference with at home is, that the portable at work, uses "Use automatic configuration script" in IE - Tools - Internet options - Connections - Lan settings".
I've looked everywhere in the PIE's options where to 'activate' the use of the same script.. but couldn't find it.
Anyone any ideas?
thx!
I cant get bluetooth explorer to work.
Whenever i tick the check box to enable bluetooth explorer in settings, once i click ok it does not save it and the box is unticked when i open up bluetooth settings again.
Anyone else have this problem?
Any ideas?
I try to fix:
****FIXED*****
Now the Problem just happen to hit me when my bluetooth explorer wasn't working on my Touch pro. From the stock rom it worked fine, then I applied some tweaks, and it stopped.. So I starting searching.. I have came up with no Fixes, so I was retracing my steps..
What had happened was I had set my File System Cache to 131072 from the registry. I never noticed it, till I fired up Advanced Config, and Noticed that when I clicked on the list of sizes, 8M was the higest, I thought that was strange, so I set it to 8M in advanced config, Soft Reset, and now my Bluetooth Explorer is working just fine..
So, recap..
Make sure your FILE SYSTEM CACHE is set to 8M Or just not some Huge Number, My FILE SYSTEM FILTER CACHE IS SET TO 131072
Notice where I got the mixup I set the wrong values.. Hope this can help some people out..
For those who don't know what the Bluetooth Explorer is, Its quite simple, You need to enable FTP Sharing on your Device such as your computer.. Then open the FTP Explorer on your phone, it will list the bluetooth devices it finds, once it does click the device, and walla all the files that are on the device(computer) folder you setup now show on your phone..
If anyone has any questions about this or needs help fixing it, just PM me.
Click to expand...
Click to collapse
but nothing happen, I open start > program > without bluetooth explorer
I use mighty rom, window mobile 6.5
I had no issues when I was using WinXP and a Tilt, I could just pair the laptop and Tilt and transfer files back and forth.
I am now on a new Dell laptop w/ Vista (and Dell Wireless 360 Bluetooth module) and after pairing w/ my Fuze, I cannot transfer files in either direction.
Any thoughts????
Hi, I have your exact same setup and just got BT exporer working.
Things to check are:
1. go to settings under "communications manager " and select Bluetooth
2. add your laptop as new device
3. under mode, make sure "make this device visible.." is checked
4, under FTP, make sure "enable BT explorer" and "enable file sharing" are checked.
On your laptop I used the "Bluetooth Information Exchanger\File Transfer\Shared Folder" to transfer files and I got it to work.
It isn't easy to setup but it does work.
Cheers,
Connor
did you try this from the same thread?