Related
Hello,
i want to use the led light for an incomming sms more than 5 min. In the setting i´m not able to select the remember box (is not enable) i only can see that the time is set to 5 min.
I want that the led flash for 60 min.
Any ideas ?
Daniel
Daniel, I did manage to find it in the registry, to make it flash "no limit" the value was zero, the default value was 5000 (5000 milliseconds=5 seconds) so the value will be 60000 for 1 hour. My phone is doing a ROM update right now, so I will have to post after I search through the registry again. Try usingt PHM Regedit to search for "Flash" and keep clicking "find next" until you find it. I will post the reg key later.
Hello sasha26
i used TC and i only found two entry with FLASH.
The values are not for the flashing signal (one for camera?)
Daniel
I found the entrys
HKCU/ControlPanel/Notification/{A877......} (one entry for each notification)
if found the duration for new SMS / new MMS .... and more. Set the duration from 5 to 60 - restart.
now in the windows setting the value from 60 is in the field.
Daniel
led
but...
when i've an incoming sms the only led lighting is the circular one...
the up led in speaker phone when works?
OKAY this is wierd!
I didnt realize that the Diamond had a LED light!
I have had mine for a week now a didnt discover it was missing!
Can someone post the reg settings for the different values!
AFAIK there is only the circular light around the center button.
I think the "LED" you're referring to is the ambient light sensor next to the speaker?
When I set the duration to 0 - would it light on until I'd read the message?
Mr.Eliot said:
AFAIK there is only the circular light around the center button.
I think the "LED" you're referring to is the ambient light sensor next to the speaker?
Click to expand...
Click to collapse
AH...OK! yes, im referring to this one...
Hello,
i found several entrys in
HKCU/ControlPanel/Notification/
for each entry in the listbox from "Windows - Settings - Sound - Notification".
I have a German Rom so i don´t know if the numbers in the {} the same as in the US / GB Rom.
But it is easy to find, in the entry you also find the text e.g. "New SMS".
I only set the entry in Duration from 5 to 60. In the Windows-Setting now 60Min appears.
Daniel
Is it possible to make the light be active for more then 60 minutes?
How about 120, or unlimited? (untill you have read the SMS)
Are you sure? I think the battery will not be happy eheheh
bye
stefano
larsemil said:
Is it possible to make the light be active for more then 60 minutes?
How about 120, or unlimited? (untill you have read the SMS)
Click to expand...
Click to collapse
You could always try. 1440 for instance, that's 24hrs
more than 60 does not display, anyone an idea what happening about this ?
0= unlimited. If you look in settings after setting the reg to 0, it will show unlimited.
thanks for this tip
could not find the actual key to change....
unlimited does not work, the led goes off after 1 min.
anyone an idea ?
smithi said:
more than 60 does not display, anyone an idea what happening about this ?
Click to expand...
Click to collapse
I have change to 120 - now i testing - 30min ago and wait
edit:
after 40min flash stoped ?!?
Thanks Matt....what value / line in the registry are you changing
[edit]
Thanks All....
After reading this thread at least six times decided to read again but carefully......
Have seen the light and the keys that needed changing...again many thanks.
Have set to 60
Testing missed call...set to 60.....shows in settings notification
good after 5 min then 30 min ......
will advise if reach 60 min.
has stoped at 50 minutes.....not sure why...
hmm, the right thing to do is to actual unlock this feature like it's meant to be, I wander why they greyed it, possibly they were so paranoid and afraid of battery life so they turned everything they can come for...
so, to sum it up, 0 in settings doesn't work and max available flashing is around 50 min.? For both missed calls and sms's?
EDIT:
Just found it. You have to change AvailableOptions to 12 instead of 11. This will ungray drop down menu just like it should be.
I don't know if some know but there are few options that you can modify in registry to enhance the sound. You can change value prim_treble, prim_bass...... they go from 0 to 4. You can even change the setting of equalizer and make them go till + or - 12 (and not only 6 as in audiobooster)
I have tried the old Audiobooster with this cab :http://forum.xda-developers.com/attachment.php?attachmentid=58130&d=1195040550
All work! Means you don't have to modify registry you can modify through it. Only trouble is resolution. Not VGA
Could someone make it for VGA devices?
is this only for headphones or does it push the speaker from the phone to ?
thanks
headphone only to prevent speaker from damaging
reffering to the tweak list for the touch diamond;-
2. Boost TFL3D Performance --> HKLM\System\Storagemanager\Fatfs and change key Cachesize from 16384 to 32768
Ive been to Fatfs with PHM regedit and the value data in "cachesize" is displaying "0", shouldn't it be "16384" am I doing something wrong ?
Rom - 1.37.405.1.wwe, 12/6/08, protocol - 52.26a.25.09h
Will this tweak work with this rom?
Perhaps i should be using Advanced Config ?
couldn't find anything helpful in previous threads
any help is cool.
p.s., tried altering the "screen-off" setting, not much luck with that either
I have just started using ms voice comand, but the volume is very low
I have looked about and done a reg hack to change
HKEY Current User - Control panel - Sound Catagories - Voice Command -
Change:
Attenuation Catagory - Value 1
InitVol - Value 3
and also tried
HKEY Current User - Control panel - Sound Catagories - Voice Command -
Change:
Attenuation Catagory - Value 2
InitVol - Value 8
but neither of these make it any louder
anyone using voice command, that has been able to fix this on a diamond?
I am only using it on the speaker and not a bt headset
Also i noticed that the speach is not as clear as cyberon VC, as it is alot faster. But i prefer the features of MSVC with regards reading the email subjects and caller id
7. *Adjusting Volume of Announcements -* There are two values that seem to influence the volume of announcements. They are stored within the following key:
*HKCU\Control Panel\Sound Categories\Voice Command1*
The values are:
*AttenutationCategory*
*InitVol*
There are apparently different default setting based on your device. In general the values are generally around 1-4 for *AttenuationCategory* and 1-5 for *InitVol*. Some research shows that setting *InitVol* to 40 and *AttenuationCategory* to 1 provide the best results. In my testing I have found the *InitVol* to do nothing. The *AttenuationCategory* definitely does something, it seems the lower the number the lower the voice. When set it to 0 the announcements were very faint. Setting it higher made them higher, although I can't say that anything over 4 or 5 got any louder.
In my findings I would say set both of these to 5 (I have read some other posts that lead me to believe setting InitVol over 5 is pointless, in addition, the posts that recommend setting it to 40 don't specify if that is decimal or hex).
Got this out of the Kaiser Forum.
do i need to restart the device for these settings to become active?
What I do is shut the phone down...Power Button, and then take out the battery for a second or two, then I put the Battery back in and start it back up. Some reg settings you change revert back when you just soft reset.
I would love to make voicecommand louder BUT i can't. I changed the values but the volume is still down....
How do i do???
Someone???
I read in one post that if I remove S2A, the voicecommand will be louder...but i still don't know how to remove S2A....
HEEEEEELLLLP!!!
The loudest volume level on HTS HD2 i got with:
indows Registry Editor Version 5.00
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\InCallFeedback]
"AttenuationCategory"=dword:00000001
"InitVol"=dword:00000005
"DefaultSound"="\\Windows\\HTCTone\\Midi2Wave_079_4098.wav"
"Directory"="\\Windows\\"
[HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce]
"Category"="InCallFeedback"
"Sound"="\\Application Data\\Volatile\\\\TTSCallerID.wav"
"Script"="p"
Not tested on BT headset yet.
Hi there,
since i got my Kaiser i always had a problem with the low BT Volume. I tried many fixes from here but noone works for 100%.
The only lud roms were the PDA Corner ones.
So i made my own
Install the attached cab and restart your device. Then sound will be fine and loud.
If you use SRS Wow it won't work after installation, cause i had to change the drivers in registry.
@MODS: CAN WE MOVE THIS TO DEV/HACKING SECTION? CAUSE I THINK THIS COULD WORK FOR ALL DEVICES!!!
what exactly does this do (on your phone, what does it change, or is it a program always running?) and if it makes things worse is it uninstallable ? (since I see it's a cab).
Mr. Kayne said:
what exactly does this do (on your phone, what does it change, or is it a program always running?) and if it makes things worse is it uninstallable ? (since I see it's a cab).
Click to expand...
Click to collapse
The .cab file just contains registry settings and the file 'AudioPara3.csv'. As far as I can tell the 'AudioPara3.csv' is identical to the one already in my ROM (stock-ish 5.2.19212), however there are quite a few new registry entries that I can't see in my ROM
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate" = 48000
"BitPool" = 0
"UseJointStereo" = 0
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"PowerSave" = 1
"ConnectHFOnCall" = 1
"Capability" = 101
"BTAGExtModule" = OEMAGW.dll
"SupportCLI" = 0
"BTAGPBModule" = \Windows\BthAGPhonebook.dll
"NoRoleSwitch" = 1
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BtA2dpSnd]
"GainADC_LoudSpkMIC_12h" = 60
"OldDriver" =
"Dll" = bta2dp.dll
"SPKVol_NotPhoneCall_02h_06h" = 0
"SPKVol_PhoneCall_02h_06h" = 3
"HPVol_PhoneCall_04h" = 4
"GainADC_BluetoothMIC_12h" = 33
"GainADC_HeadsetMIC_12h" = 42
"GainADC_ReceiverMIC_12h" = 55
"3DEff" = 0
"MicGain" = 39
"AGC" = 0
"Treble" = 0
"Bass" = 0
"IClass" = {A32942B7-920C-486b-B0E6-92A702A99B35}
"Sysintr" = 25
"Flags" = 65538
"Index" = 8
"Order" = 8
"Prefix" = WAV
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"OldDriver" =
"Dll" = Wavedev.dll
"Flags" = 0
"IClass" = {A32942B7-920C-486b-B0E6-92A702A99B35}
"DACVol_0Ch" = 7
"SPKVol_NotPhoneCall_02h_06h" = 0
"SPKVol_PhoneCall_02h_06h" = 3
"HPVol_PhoneCall_04h" = 4
"GainADC_BluetoothMIC_12h" = 33
"GainADC_HeadsetMIC_12h" = 42
"GainADC_ReceiverMIC_12h" = 55
"3DEff" = 0
"MicGain" = 39
"AGC" = 0
"Treble" = 0
"Bass" = 0
"Sysintr" = 25
"Priority256" = 149
"Order" = 11
"Index" = 1
"Prefix" = WAV
Andy
The .cab file just contains registry settings and the file 'AudioPara3.csv'. As far as I can tell the 'AudioPara3.csv' is identical to the one already in my ROM (stock-ish 5.2.19212), however there are quite a few new registry entries that I can't see in my ROM
Code:
Click to expand...
Click to collapse
Yes thats right, the most of the cab are just reg keys, there is no app or similar that runs in background. The audiopara.csv is from an oldr att rom.
First i trie every fix around here on xda-developers, but no one of them worked properly. Then i mixed some of the together, and i noticed an improvement. Some days ago i got the csv file and replace it with the one in my actually rom and volume was very high. I checked this on several roms and for me it seems to work. Some of the reg keys don't do anything with the volume but they improve the sound quality over bluetooth.
Would be great if some of you could post their results.
Don't matter, i don't know if you can completly uninstall this, but there is no key or so that will make bt or so not work anymore.
Also it would be great if you could send my you audiopara.csv files and the reg keys of the rom you are usin (if it's loud), so i try to improve it more and more, or am i the only one with bad volume?
If anyone is using a pda corner rom at the moment, please send me the reg keys and the audiopara3.csv cause theese roms had the best sound quality and volume with bt.
well I tried it out and I guess my bluetooth is slightly louder. ( I checked it before and after)
No adverse effects.
Solace v1 (ROM version 3.29.707.0 WWE)
Radio 1.70.19.09
Windows Mobile 6.1 of course. Hope that helps in some way.
Thanks my brother,i'll test your cab.
Hi Jecky
Thanks for this !!!!!!
To be honest, can't differentiate a "absolutely louder" feeling.
Can you tell us how to modify / what / which part to modify by ourselves to alter the volume up or down? Thanks.
My BTHS is Omiz2099, when matched to ELF is loud as hell. But when match to Asus P552w GalaxyMini2 is soft as hell.
Hence this is much appreciated. eventhough not feeling significantly, but Thanks still.
Did u changed the parameters of the sound variables to their maximum values in that registry tweak ????
BT headset micro_speaker volume change
BT headset's micro_speaker volume hasn't increased, but MIC pickup has, after I changed everything to "100".
I notice there isn't any BT heatset micro_speaker's volume control.
i.e. I suspect need "BTVol_PhoneCall_??h_??h" = ??
but I don't know how many h or whatever to use behind.
Anyone can shead of light?