Related
Can you please help my configuration is same as yours mentioned on the site
ROM VERSION 1.12.62 WWE
Radio Version 1.02.00
Protocol Version 1337.32
Ext ROM version 1.12.925
The problem I am having is that most of the time when I receive or make a call the other party cant hear my voice. I do a soft reset and it works even the Service centre people couldn’t help as they didn’t want to upgrade the Radio ROM. I learned on the website that upgrading th radio rom would help. However I have tried and its usually get an error. Is there any simpler option where I can download the RADIO ROM UPGRADE.
Thanks
I highly suggest you check out Wiki and read up WELL.
I had the same problem, I upgraded my radio from 1.08 to 1.12 and it was solved. check this site:
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.10_Upgrade[/url]
Edit: It says Radio 1.10 upgrade, but the page shows the 1.12 upgrade.
Have tried but none of the damn things or upgrades are working on my X2 probably the specs are not matching and the service centre people have no clue or they are not ready to upgrade the same for me.
hi all,
i have a qtek 9100 flashed with the uk rom 1.6.7.1 from this website and since i did that... i can not turn my wifi on!
have readed almost all topics going about the wifi issues but nothing helps
please thanks to anyone how can help solving this problem
regards kimo
Having the same problem here with the dutch Qtek rom 1.3.7.10. Cant use WLAN after flashing from vario Rom to the Qtek.
Also have a problem when i try another Rom. It doesnt seems to work anymore when trying to flash. ActiveSync disconnects when trying to flash Rom. (is disconnects when the status bar is showing up)
did you fixed your wifi problem
did you fixed your wifi problem?
please let me know
thanks
Check your Router/wifi!!
I know this might seem really stupid, but I've had the exact same problem. Fortunately after hours of trying to solve it, I tried my wifes MDA Pro, which to my delight also couldn't connect via wifi. :lol:
My problem was exactly that. My wifi router needed to be soft-reset or switched off and rebooted!
It solved my problem. It might be the same for you. Incidentally, I am now running the same Qtek 1.6.7.1 ROM from T-mobile Vario ROM as you guys and I assure you it's not the ROM.
Give it a try if you haven't already. Additionally, I find after ROM updates, my wifi won't connect till I set the power slider (wifi settings to Best Performance).
Good luck.
mackaby007
Qtek ROM:
Rom Version: 1.6.7.1 WWE
Rom Date: 11/28/05
Radio version: 01.13.10
Protocol version: 4.0.13.24
ExtRom: 1.6.7.101
I put the new FW or rom in my 8125 from Cingular, everything works.. got SMS working, got EDGE working, but Wi-fi does not
it sees the AP but will not connect. it says connecting then Unavailable
ideas.. i would like wifi.. really a conveance.
e.b.
what did you upgrade to? I upgraded to 2.16.9.101 and have had no problems connecting to my WPA protected wifi network.
mine says ROM 2.16.9.1 WWE
extended rom 2.16.9.101
radio 1.12.10
and you used the RUU file to upgrade the unit???? mine upgrade the radio to 2.07.10 as well.
IPL/SPL: 2.16
ROM Ver: 2.16.9.1 WWE
ROMdate: 2/6/6
Radio: 02.07.10
Protocol: 413.1.0.2
ExtRom: 2.16.9.101
ROM Ver: 2.16.9.1 WWE
ROMdate: 2/6/6
Radio: 02.07.10
Protocol: 413.1.0.2
i bypassed the extended rom.. so there is none
but.. still no working wifi
it see the AP but will not connect to it
same problem here, haven't found a fix yet. My router is only 802.11b capable and not 802.11g. I wonder if that has anything to do with it. Maybe this new ROM sets the device to G only. Although, using Nico's registry wizard, the G mode isn't selected.
Do you have any kind of encryption active on your wireless router? If so, turn it off and see if you can connect. If you can, I'd suspect a problem in the key.
If you still can't connect even when WEP or WPA is off, then the problem is elsewhere. What kind of router is it?
I was going mad with the same problem.
I'm not 100% sure it appears the issue was related to the MAC address of my unit - as well as WPA I do MAC filtering to weed out unwanted devices
I'm not sure if it was a base-station issue, or if the ROM upgrade changed the MAC address on my K-Jam
double-checked and added the IP from the device and now it's happy as Larry (as I say it may be a total red herring... I may have forgotten to save the router config to Flash and we had a powercut over the weekend...)
if you installed the cingular extended ROM do a hard reset immediately. that's what f's up wifi. i loaded the full extended rom and was NOT able to get wifi to even start. once i hard reset, everything was a-ok
darkjedi said:
if you installed the cingular extended ROM do a hard reset immediately. that's what f's up wifi. i loaded the full extended rom and was NOT able to get wifi to even start. once i hard reset, everything was a-ok
Click to expand...
Click to collapse
There is NO EXTEDNED rom installed at all.
I bypassed it compleatly.
when it asked me where I was (orange etc..) I did har soft reset and no rom was installed at all.
no cingular rom, no Imate rom, no extend rom other then the OS
e.b.
i wasn't meaning you in particular, i'm saying for the people who can't even get wifi started.
I did allow it to run the RUU's extended rom... I don't remember which carrier I chose on the carrier screen. My wifi does work fine on my WPA G network.
ok.. so i am an idiot.. i tried another AP and it worked fine.
so my question is.. (this worked before BTW, before I upgraded to the new ROM)
I have a linksys SRX400 router (WRT54GX4).
I just upped the FW to 1.00.10 from 1.00.09.
any ideas?
e.b.
I appear to have the same problem with my qtek 9100.
Used to connect to my pair of dlink dwl-900ap+ 's fine. Since the rom upgrade it will only connect if I turn off wep! No idea about wpa cause I've never managed to get it to work!
Naive queston
I just bought my Cingular 8125, and it's my first one of this kind.
Please, could some one tell me what advantage new ROM gives over standart package?
Thanks
After upgrading an i-Mate PDA2K (PH20B 0 B WWE E CDL__001 1.40.00 0 0 1.12.00 12.00) to WM5 BA TuMa v1.3 Release (as well as various other WM5 ROM builds), the device has been restored back to original shipped WM2K3SE ROM (PDA2k_WWE_14000_176_11200.exe), due to numerous problems including ActiveSync connectivity via USB or Bluetooth failing.
However, now when reverted back to original shipped ROM, device reports that the Bluetooth license has expired and disables the Bluetooth. Re-enable Bluetooth device and the same thing happens, it reports an error and disables itself again.
Any solution to this problem?
Also, why doesn’t reverting back to shipped software (CE-ROM, EXT-ROM, Radio) solve this problem?
Can someone please explain what flashing ROM changes and what it does not change?
sorry i have the same problem and i'm still trying to solve it
anybody can help us????????
plz
Had the same problem after pairing my BA with my new Headset.
Switched BT off and did a Soft-Reset ... after restart switched BT on again and the Message was gone. I am unable to explain why this happens but it worked for me. Good luck guys.
i even tried t-mobile rom , o2 rom , i-mate rom
but the same problem still on
i'm trying again ........ :?
This problem seems to be related to the Widdcom stack (at least, it was with me). The 3900 stack does not work with WM5.
hope this helps?
hey guys, i have a Orange SPV M2000 UK set and currently having this problem (license expired) for few days. So i tried flashing the firmware to O2 2s firmware, the bluetooth still expired.
the question now is,
1. if i upgrade to WM5, will this problem (bt expired) solve? Anyone tried this? I willing to do anything to fix my bt, except sending this phone back to the factory, since now im in malaysia.
2. when i update the firmware for wm2003se (orange UK firmware) they say country id error. why so? how can i flash the firmware if this error comes out?
really appreciate those can help me out here. im total out of idea to fix this stuff.
hey guys, i have a Orange SPV M2000 UK set and currently having this problem (license expired) for few days. So i tried flashing the firmware to O2 2s firmware, the bluetooth still expired.
the question now is,
1. if i upgrade to WM5, will this problem (bt expired) solve? Anyone tried this? I willing to do anything to fix my bt, except sending this phone back to the factory, since now im in malaysia.
2. when i update the firmware for wm2003se (orange UK firmware) they say country id error. why so? how can i flash the firmware if this error comes out?
really appreciate those can help me out here. im total out of idea to fix this stuff.
edited:
I fixed my bluetooth expired prog. download the broadcomm 1.6 version from ftp and now bluetooth work like normal. the downside after installing this version is that the messaging kindda lag (bug?) and today's theme kindda messed up (no big issue; just change to other theme)
another problem came out is, i can pair with bt handsfree, but not functioning properly.
Hello,
after a Rom update on my QTEK 9090, the radio stack is missing (no gsm) and now is not possible to update it. I've already tried the suggestions on http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors
address but my pda still not working.
Could you help me?
thank you before
does it say NONE during bootup? maybe this will help.
http://forum.xda-developers.com/showthread.php?t=263086