Hello,
I've got a little problem, I've installed TomTom 6.032 on my Kaiser. After successful instalation it shows up in Programs and Today screen but that Today screen's TomTom icon doesn't work, it only makes a sound when I click on it and nothing else happend. From Programs it can be started normally. I'd be glad for any suggestions. Thanx
Related
Greetings,
My Kaiser arrived without Tom Tom 6 installed. I found the software on these forums, installed it and GPS is working fine. However, after installation my Today screen disappears completely. Even after going into settings and adding items nothing appears on the screen except battery, signal strength etc on the top bar.
A hard reset solves the problem but only until Tom Tom is installed again. Any idea what could be the problem?
Hmm, I remembered that I got this issue before, but I just did soft-reset and then fine again.
Maybe try to arrange the plugin up and down. Put the Tomtom in the bottom.
alexmw said:
Greetings,
My Kaiser arrived without Tom Tom 6 installed. I found the software on these forums, installed it and GPS is working fine. However, after installation my Today screen disappears completely. Even after going into settings and adding items nothing appears on the screen except battery, signal strength etc on the top bar.
A hard reset solves the problem but only until Tom Tom is installed again. Any idea what could be the problem?
Click to expand...
Click to collapse
I tried doing above but no success. It appears that its not only after Tom Tom installation, but any time i try to configure Today Screen it simply disappears. This also happens after running any program e.g skype or google earth.
Anybody help?
Sounds like a defective unit since I have only heard of this happening to yours sorry to say.
All,
I recently flashed over to the HTC ROM. Since that time, I have had TomTom hangup on me after I fully charged the battery. Partial charges seem fine, but whenever the battery is fully charged and I do a softreset Tom Tom will start up and hang on the startup screen at that point my phone is useless and won't respond unless I take out the SD card.
So I have two questions:
1) First, what is the regedit I can do to stop TT from automatically starting on reset?
2) I am currently running TT Nav 6.010-ish... I am planning on updating using the cab files I have seen on here to 6.032. After updating, do you think that will solve my problems with TT hanging up??
Thanks for the read.
I've installed SPB MS2 and P+ and the Kaiser Tweak.
Oddly, on my Today screen I get the rotating prism indicating a running application or booting application when there is none running or booting. It appears for a 1/2 second every few seconds. Even a soft reset doesn't fix it. Usually, if I shut the phone down overnight it is corrected when powered up in the am, but not this am.
I checked my memory and "running programs". Nothing there. I turned off my weather updater and my activesync.
What gives? Anyone?
aint nobody got any ideas here?
Hi,
Maybe you can try memmaid. It may help you to detect what's the problem.
yawcheehou said:
Hi,
Maybe you can try memmaid. It may help you to detect what's the problem.
Click to expand...
Click to collapse
DL'ed it and found the camera program operating in ghost mode but that did not eliminate the issue. Any other ideas from anyone?
I have a problem this sometimes and I think I have discovered that it is my SPB PocketPlus Today Plug-In.
I usually deselect the plug-in in the SPB pocketplus options and OK it, then turn it back on again and the problem stops.
rjcb23 said:
I have a problem this sometimes and I think I have discovered that it is my SPB PocketPlus Today Plug-In.
I usually deselect the plug-in in the SPB pocketplus options and OK it, then turn it back on again and the problem stops.
Click to expand...
Click to collapse
Now this is interesting. I had not tried this. My PP is not enabled for my Today screen but my MS2 is (I have a PP tab for my MS2). I unchecked MS2 and the problem stopped. But, my touchscreen locked up so I had to soft reset. On restart the problem is gone. Re-selected the MS2 and issue is gone.
Thanks. I'll post it on the clubspb so that the company will figure out what the problem is.
I have had tomtom7 installed on my T-Mobile Compact V. Ive also upgraded .NET to 3.5 and installed g-config so as to allow TT7 to work in landscape mode. Everything worked fine, (other than the known problem of the clipped audio).
However I now find that sometimes (more and more regularly), when I start TOMTOM, I get the spash screen, but when that dsiappears, TT7 doesnt start.
The only way round this is to do a soft reset and start TT7. however when I exist and then later try to start it again it again sometimes refuses to start.
Anyone else had this problem?
Regards
Max
I have the same problem...sometimes it starts at the first time, others it doesn't start for 4/5 times...
I get that problem occasionally, but I have never had more than a single incident - simply launching the app again (without a soft reset) has always worked for me...so far.
same here.
Sometimes it starts the first time, sometimes after 2 to 10 times ! And sometimes it won't start at all and the soft reset is needed. (ClerRAM level 2 doesn't work in thoses cases).
Pretty annoying beacause sometimes during a day I have to start TomTom 20 times (and if every time I need to start it 10 times ... you do the math !)
I guess there is a process interfering with TomTom boot, but I can't seem to find wich one...
Which version of TomTom do ya all use?
I use 7.910 without any problems.
With 7.915 I had problems but not for long because I un-installed it very quick.
I use 7.910 indeed ...
what kind of problems did you have with 7.915 ?
i have the same problem but i have to just try and restart the app once or twice again for it to work. The version im using is 7.915 (installed using ttn7.915.9196.vga_black.cab). If u actually have the MS error reporting on it shows that an error occured but just asks to send info to MS. however im not sure how to check the details of the error.
any ideas?
bonethug_51 said:
i have the same problem but i have to just try and restart the app once or twice again for it to work. The version im using is 7.915. If u actually have the MS error reporting on it shows that an error occured but just asks to send info to MS. however im not sure how to check the details of the error.
any ideas?
Click to expand...
Click to collapse
I think the prompt asks you if you want to check for details.
Im using TTN_7.450.9028
Its that a stable version?
While using TT yesterday, I found that i dont have to reset, I just need to keep launching it, till it starts.
i had the same problem when i installed tomtom on the storage card, it instaled on the phone now and it starts first time, everytime
Hi Everybody
Thanks to your support and explanation in this forum, i upgraded my Qtek 2020 to WM 6. But now i have problem when i use tomtom 7. During navigation, the screen freezes for a couple of seconds, and then starts to function again. Every few minutes, the screen freezes, and so on. I tried to upgrade radio rom to ver. 1.17, tried different tomtom versions, and also the ATIFIX.cab file, but this doesn't work on Himalaya devices.
I need right suggestions to fix the problem.
Thanks to all.
Regards
Sounds to me like lack of memory or slow sd-card. A 133x works fine!
I finally solved!!!
The problem was the phone section turned off.
When i turn on phone section ok Qtek2020, Tomtom works fine, never freeze and really smooth during navigation.
That's all!!