touch keyboard stuck on numericals - Tilt, TyTN II, MDA Vario III General

For some reason now, I cant get the letter keys on the touch keyboard to be displayed. I tried searching all over for a possible solution, but I couldnt find anything. If anybody to help me out with this, id appreciate it.

anybody? This has been bugging me and was wondering if anybody was experiencing the same thing...

so reading around a bit, it turns out that the disable xt9 cab messes up the touch keyboard...
is there a way to fix this problem?
I would really like to use the touch keyboard and this is a bummer

Try maybe uninstalling the xt9 cab and soft reset... see what happens

moto2000 said:
For some reason now, I cant get the letter keys on the touch keyboard to be displayed. I tried searching all over for a possible solution, but I couldnt find anything. If anybody to help me out with this, id appreciate it.
Click to expand...
Click to collapse
I think you mean numerals or numbers. Never heard of numericals.

TTUStudent said:
I think you mean numerals or numbers. Never heard of numericals.
Click to expand...
Click to collapse
nu·mer·i·cal –adjective
1. of or pertaining to numbers; of the nature of a number.
2. indicating a number: numerical symbols.
3. bearing or designated by a number.
4. expressed by numbers instead of letters
courtesy of Dictionary.com

Related

HTC Touch Keypad

When I install the keypad I get something really weird and unwanted when I want to write a new text message.
Without the keyboard installed I can write the first couple of letters of a contact and it will give me a list of contacts that match that set of letters. however once the touch keyboard is installed I just get its own autocomplete kick in... even when I submit the letters the contact popup doesn't come up?
Does anyone know a way of keeping the contact functionality and the keyboard at the same time?
I've tried disabling XT9 reg file in one of duttys threads, still no joy
Yeah the exact same thing happened on mine and unfortunatley i couldnt find a solution either and eneded up removing it from the device, this being a real shame cause it was very useful specially for texting one handed.
A part solution is to send new text, use touch keyboard to enter first couple letters like you would before then menu / check names it should then bring up a list of ones that partially match, bit long winded though.
Anyone else found a solution to this?
Anyone found a solution to this? I'd love to be able to use the htc pad...!
can anyone recommend a better input thing that will preserve the mentioned function?
I just press the 'to ' text yo the left and use the list , tis fairly fast -- but now I must go as my battery is almost dead!
Its quicker to just to press a letter
Can't anyone think of a fix!!?
Can I just use the sip file or something from the cab?
I've found a cab to disable the XT9 and it means that you can press a letter and it will come up with contacts matching the letter... however it messes up the touch keypad and board.. they both just display all the letters and numbers. :/
so, where is the cab file then ?
Hmmm I think i saw the cab file somewhere

Stop screen keyboard from opening automatically

Argh! its one of those annoyances that pisses me off lol.
Every time I enter a text field screen keyboard pops up covering half of the screen.
How do I stop it? I want it to open only when I click on it.
..........
Out of curiosity, are you using the standard keyboard or Pocket CM, resco ect?
Standard, the one that comes with Dutty's v4. It has a Touch skin, but I think it's standard keyboard.
If there's an answer somewhere - please point me in the right direction.. I searched and didn't find anything (it's kinda hard to phrase this one)
Sorry. Don’t have any answers for you. I was asking just to keejp note just in case a similar problem occurred with my Kaiser. I have an original non flashed rom by the way, so it probably won’t be a problem with me.
246810 said:
Sorry. Don’t have any answers for you. I was asking just to keejp note just in case a similar problem occurred with my Kaiser. I have an original non flashed rom by the way, so it probably won’t be a problem with me.
Click to expand...
Click to collapse
Yes you will.
It's not a bug, it's a feature.. and it comes standard with every ROM I've seen (WM5+). Most people won't have a problem with it, but if I type something, I use hardware keyboard.. so on-screen keyboard pop-up is useless for me.
ummm... well it hasn't been a problem with any of the two MDA touch's, MDA vario II, or two MDA Vario III's I've had in the last few months... Fingers crossed it'll stay that way....
I would also like to see a solution
I vaguely remember a blank-sip or none-sip program exactly for this purpose. You could make it the default. Maybe PHM made it, try searching on the web.
I like the option of using the SIP sometimes, but most of the time I don't want it. It seems like once you use it once, it thinks you want it all the time, until you use the hardware keyboard again. How hard would it be to just let me click on it when I want it. Jeez!
a blank SIP is an option in this free program: http://www.phm.lu/products/PocketPC/PowerToys/
Blank SIP is a solution, but not a very good one. When I do want to use screen keyboard, I'd have to snipe that little arrow to open SIP selection, then find what I want and click it. Wait for it to load...
It'd be easier if it just wouldn't pop-up when cursor is in the text field. There's probably a setting somewhere..
Try this....
DarkDvr said:
Blank SIP is a solution, but not a very good one. When I do want to use screen keyboard, I'd have to snipe that little arrow to open SIP selection, then find what I want and click it. Wait for it to load...
It'd be easier if it just wouldn't pop-up when cursor is in the text field. There's probably a setting somewhere..
Click to expand...
Click to collapse
Try these registry settings that worked for me. When I used to open a new document with ms word or go to the address bar in PIE the sip used to pop up but not after applying these settings. After import .reg file or changing them manually you will need to soft-reset.
It now only pops up when i select rename file in resco explorer. But I can live with that.
Hope this helps...
diigibio (diigimatrix)
Some programs call it automatically. It's the way they're coded. I would think there wouldn't be a way to suppress the on-screen keyboard without disabling it entirely.
ugoff said:
Some programs call it automatically. It's the way they're coded. I would think there wouldn't be a way to suppress the on-screen keyboard without disabling it entirely.
Click to expand...
Click to collapse
The only other way to do this is to go to HKEY_CURRENT_USER\ControlPanel\Sip and change "AllowChange" from 1 to 0 and then soft-reset. However as you say this will disable it fullstop. So the only way you could enter info is either at the dialer (to call someone) or by using the slide out keyboard. To re-activate change the 0 back to a 1 at the above registry key.
diigibio

Installed Touch Keyboard & Keypad. Help w/ 2 minor issues please!!

Okay ladies and gents, I have searched and searched and can't seem to find my answer. I am sure one of you smart lads can give me a response in 4 seconds.
The keyboard and keypad work great on my Tilt but I have two issues:
1) I've noticed the screen shots include a tool bar above the keyboard with options for BOLD, UNDERLINED text, ect. I do not have that. What can I do?
2) My xt9 works fine but if I want to create a new text msg, the drop box of contacts no longer appears. This is quite hard to explain but before xt9, if I inputted the letter "J," a drop box of about 7-8 contacts will show up to with names starting with J; sort of like a quick list. The more letters I inputted, the more specific of results the drop box displays. Even if I am in ABC mode, this feature is no more. Would I have to kill Xt9 via registry to revive this feature?
Thanks in advance.
richabi said:
2) My xt9 works fine but if I want to create a new text msg, the drop box of contacts no longer appears. This is quite hard to explain but before xt9, if I inputted the letter "J," a drop box of about 7-8 contacts will show up to with names starting with J; sort of like a quick list. The more letters I inputted, the more specific of results the drop box displays. Even if I am in ABC mode, this feature is no more. Would I have to kill Xt9 via registry to revive this feature?
Thanks in advance.
Click to expand...
Click to collapse
I too have this similar issue
I am unable to type anything in the to: field cause of Xt9
but after uninstalling of the touch keyboard it works again
yeah, I figured it is software conflict with xt9 - you can have one or the other kinda thing. I think I rather have the xT9 than the quick list. I will just have to press one extra key (return) for every contact included.
corleno said:
I too have this similar issue
I am unable to type anything in the to: field cause of Xt9
but after uninstalling of the touch keyboard it works again
Click to expand...
Click to collapse
Try using the diamond keyboard, it solve the problem.
pmtan666 said:
Try using the diamond keyboard, it solve the problem.
Click to expand...
Click to collapse
thanks that did the trick !!!
the only annoying feature
NO SPACE after clicking a predicted word !! grrrr
anyway to overcome that ?

Messages name auto complete

Ok, so when I used to start typeing a contacts name in the 'to' field of message, it would give me a list of names or numbers after putting in a few letters or numbers. Now I have to put in a couple letters/numbers and then go to check name. Anyone have any idea how i turned this off.
GreenLantern said:
Ok, so when I used to start typeing a contacts name in the 'to' field of message, it would give me a list of names or numbers after putting in a few letters or numbers. Now I have to put in a couple letters/numbers and then go to check name. Anyone have any idea how i turned this off.
Click to expand...
Click to collapse
try this:
u want to send sms to Johny, start typing to the name field "Jo" and then push the space bar on your keyboard, an option of the possible names should pop up at the bottom.
Mikulec said:
try this:
u want to send sms to Johny, start typing to the name field "Jo" and then push the space bar on your keyboard, an option of the possible names should pop up at the bottom.
Click to expand...
Click to collapse
ok, now I feel a bit retarded, don't remember doing that before, but guess it was. Thanks.
Have loaded any new touch keyboards to your device. For me, that feature will stop working after I add any new keyboards. It will come back for a bit after a soft reset, but then it goes away again. Once I remove the offending keyboard, then it works again... I wish I could have both.
I have a similar problem if I use large title bar. When its loaded, the roller wheel on the side no longer controls call volume... Again, wish I had both!
GreenLantern said:
ok, now I feel a bit retarded, don't remember doing that before, but guess it was. Thanks.
Click to expand...
Click to collapse
u r welcome, I feel retarded most of the time.
GreenLantern said:
ok, now I feel a bit retarded, don't remember doing that before, but guess it was. Thanks.
Click to expand...
Click to collapse
You should't have to enter a space to get the options. It should appear as your typing.
As mentioned above if you installed a keyboard from another device, such as the Touch or Diamond, with T9/XT9 you will lose this auto complete and word suddgestion. There is a disable XT9 cab witch will give you the auto complete and word suddgestion back, but cause the non defult keyboards to enter number only, no letters. it that is the case you have to decide witch is more important to you.
Did you install another keyboard? or did it just stop working as it had?
I will agree that the Installation of Customer SIPs like PCMKeyboard or something else will interfere with this..
RojasTKD said:
You should't have to enter a space to get the options. It should appear as your typing.
Click to expand...
Click to collapse
yes, but its the workoround if u have installed other sips. I dont hyave this isue and have resco keybord installed, so that one is not causing the issue.
Mikulec said:
yes, but its the workoround if u have installed other sips. I dont hyave this isue and have resco keybord installed, so that one is not causing the issue.
Click to expand...
Click to collapse
Correct, but I was just replying to him saying:
ok, now I feel a bit retarded, don't remember doing that before, but guess it was. Thanks"
because he shouldn't feel stupid, because he did't have to do it previously.

TouchPal 3.5 and HTC Diamond = incompatibility !!!

Does anyone else have the following problem ?:
When you go to the SMS tab, and press the small box to start writing new SMS, if you use the original Diamond keyboard, you can just type a few letters of your contact and it will fully appear. If you use TouchPal (I'm using version 3.5), this feature is disabled, you have to type your entire contact name every time, it doesn't recognize the first few letters and try to find a match. This is SO annoying !
Please tell me there is some workaround...
Could it be that the Diamond's original keyboard stores all the contact information in the Keyboard dictionary ?, if this is true, it means no keyboard apart from Diamond's original will allow quick find of contacts in SMS...
no problem with me..
say for eg you wanna call "home"
just press H O and enter and then it will detect home in my contact.
i suspect the problem may be.. touchpal "store" what you pressed in its own list instead of going up to the SMS directly..
Same problem. Would love to see an solution, but I think there is none...
Wizard,
Do you have the Touchpal keyboard ???
its free for personal use available online..
The contacts don't display when you start typing, but if you only type a few letters and then press send a page appears with all contacts that have the letters you've typed in their names. You can then tap the contact you wish to send to.
I don't find it a problem.
mouseymousey said:
The contacts don't display when you start typing, but if you only type a few letters and then press send a page appears with all contacts that have the letters you've typed in their names. You can then tap the contact you wish to send to.
I don't find it a problem.
Click to expand...
Click to collapse
Thanks.
How the hell did you figure that out ?, I would have never tried it myself...
Noam23 said:
Does anyone else have the following problem ?:
When you go to the SMS tab, and press the small box to start writing new SMS, if you use the original Diamond keyboard, you can just type a few letters of your contact and it will fully appear. If you use TouchPal (I'm using version 3.5), this feature is disabled, you have to type your entire contact name every time, it doesn't recognize the first few letters and try to find a match. This is SO annoying !
Please tell me there is some workaround...
Click to expand...
Click to collapse
slide up the 'enter' key on single-key layout for disable word prediction. then u can get back the single letter search and few letters matching feature just like original Diamond keyboard
desol said:
slide up the 'enter' key on single-key layout for disable word prediction. then u can get back the single letter search and few letters matching feature just like original Diamond keyboard
Click to expand...
Click to collapse
That's the first thing I tried, I was shocked that it didn't work !, does this work for you ???
Noam23 said:
That's the first thing I tried, I was shocked that it didn't work !, does this work for you ???
Click to expand...
Click to collapse
yes, its work for me
desol said:
yes, its work for me
Click to expand...
Click to collapse
How could this be ???, could you please tell me your Touchpal settings ?
Noam23 said:
How could this be ???, could you please tell me your Touchpal settings ?
Click to expand...
Click to collapse
i didnt set anything. its all be default n not using any language pack
desol said:
i didnt set anything. its all be default n not using any language pack
Click to expand...
Click to collapse
desol, does it work for you if you don't disable word prediction ?, Wizard claimed in this thread that even in word prediction it works...
Here is the quote of Wizard:
no problem with me..
say for eg you wanna call "home"
just press H O and enter and then it will detect home in my contact
Click to expand...
Click to collapse
beside the contact list problem, I found that the copy and paste button is not working too. Do you have this problem?
Noam23 said:
desol, does it work for you if you don't disable word prediction ?, Wizard claimed in this thread that even in word prediction it works...
Here is the quote of Wizard:
Click to expand...
Click to collapse
if I dont disable word prediction. I will use the way same with Wizard. Both way are work fine for me
Noam23 said:
Thanks.
How the hell did you figure that out ?, I would have never tried it myself...
Click to expand...
Click to collapse
Can't remember how I found it, almost certainly by mistake though
mouseymousey said:
Can't remember how I found it, almost certainly by mistake though
Click to expand...
Click to collapse
totally agree.. we're learn by mistake
just in case you guys are still experiencing this problem, i found a fix at http://forum.ppcgeeks.com/showthread.php?p=241036
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409\Ime File
set the Ime File value from \windows\eT9ime.dll to compime.dll
soft reset device.
yea i think touchpal has alot of problems. liek the new v3.5 when i ever type in the word "its" or "were" in my sprint diamond, phone restarts wtf and same thing in the htc mogul.
Anyone have this issue to or a fix to it?

Categories

Resources