At school there is wireless all around campus however I can't connect to it. My Tilt shows the wireless but can't connect. On my laptop all I need to do is connect and then login when prompted in Internet Explorer. On my Tilt sometimes I'm able to connect and then get to the login page in IE but then it won't go any further and just stays that way. Are there any settings or mods that I can use? Please help me. Thank you thank you
I have had the same issue with my Kaiser as well as my s620 Excalibur... I think it has to do with certificates.. Atleast at my school after logging into their web page, it asks me to download a certicate on my laptop... my cell doesnt downlaod the cert, therefore doesnt work
@ first dude, tryping copying over the mac ip address from ur laptop to ur cell(idk if its possible to clone the ip to ur phone or not). when u log in through ie its most likly regestering ur mac with a mac filter...so this might work
@ second dude, try using odyssey access client on ur phone and importing ur certification that u downloaded from ur laptop...again this may not work bc the certification may only work on pc's
Yeah my school requires me to register my mac address for it to connect. Ask the IT guys or helpdesk to see how to do so!
thanks guys I will try these suggestions tomorrow at school
Related
Hi!
I'm having trouble using my tytn II as a modem in windows vista. I had no problems in windows xp but since i installed windows vista and use internet sharing application this is what happens:
I get connected and a new networkadapter (NDIS) is detected
I recieve a local ip-adress of 169.xxx...
This is making me crazy and i've searched the forum without beeing able to find anyone with the same problem...what am i doing wrong??
Any help will be greatly appreciated!
Thank you!
I understand, you use it with USB cable, may be using it with Bluetooth will be better, because in this case Windows will recognize it as a modem.
Please provide some more information about how did you make the configuration.
Did you make it as it was described in the user guide?
Hi!
I did make the configuration exactly as the manual describes it and my device is syncing correctly and everything. It even installs as a network driver when i use the internet sharing application. But it just wont give me an ip-address...
I've had this issue for over a month now and it feels like vista is blocking the service or something, but i just cant figure it out...
PLEASE advise!
I have the same Problem as you !
As a matter of fact, I have an ip but vista says that I'm connected to local network but not to the Internet.
But at the same time I have an illimited data plan that runs perfectly when using Pocket ie...
Still searching for a solution...
But i'm sure it comes from vista...
megaman
No problems!
Hi guys.
Ive used this feature with vista with no problems at all..
Just turned internet sharing on and it connected to the network connection then vista aked me what kind of network it was (Home, Work Place etc) and hey presto it worked.
Mine is a T-Mobile Vario iii btw.
Never really had a problem either though it's much too slow compared to a "real" USB-3G/HDSPA-modem. (I max out at 1.2-1.8 mbit/s but when I use my dedicated modem I easilly reach 4 mbit/s)
megaman said:
I have the same Problem as you !
As a matter of fact, I have an ip but vista says that I'm connected to local network but not to the Internet.
But at the same time I have an illimited data plan that runs perfectly when using Pocket ie...
Still searching for a solution...
But i'm sure it comes from vista...
megaman
Click to expand...
Click to collapse
Yeah this is killing me! I get the same as you, i get a IP-address but its a local one 169.xxx.xxx.xxx and vista says its a local ip-address...
I've started looking for services that may be stopped and such in Vista, but i still cant get it to work
I also can't get it to work, so if my WiFi goes out and i need internet, i just reboot to XP... Obviously not a solution, it's very annoying. I'd love to figure this out. I think my friend said he got it working, i should get details from him!
-Taylor
Guys, this is not the solution, BUT, until someone finds it, this is a awesome way to get around the problem! Just install the application, start it and tap connect. Now on your computer you'll find a new adhoc network using wifi, connect to it and your ready to go!
http://www.jongma.org/WMWifiRouter/
So the other day i decide to try to ics (internet connection sharing) with my comp via usb. But when i try to go online on my comp(firefox ofcourse) i get a HTTP ERROR $CODE$ $MESSAGE$. i no you probably have to change up some settings which ive tried. ive tried in firefox and i no i have the right settings for the ful internet with t-zones........any suggestions?
anyone?.......
Got the start menue then go to the program then accesories at the top and it will say internet share but its gona move super slow
Is Active Sync connecting properly? On the phone, is the ICS program selected to use the USB connection and not bluetooth? Does the internet on your phone work just fine?
Also, make sure active sync is green before hitting connect in ICS.
thentertaina said:
So the other day i decide to try to ics (internet connection sharing) with my comp via usb. But when i try to go online on my comp(firefox ofcourse) i get a HTTP ERROR $CODE$ $MESSAGE$. i no you probably have to change up some settings which ive tried. ive tried in firefox and i no i have the right settings for the ful internet with t-zones........any suggestions?
Click to expand...
Click to collapse
Make sure you can browse on the device first...
Try a soft reset (pull the battery out while it's turned on)
also if you have XP SP2 or higher, load up command prompt
Start => Run => CMD => Click ok
now type these in
netsh int ip reset resetlog.txt
netsh init ip delete arpcache
netsh winsock reset all
restart your computer and try your internet sharing again.
If that still doesn't work, feel free to call 1-800-937-8997 That is t-mo's cust care department, and ask for Tier 3 Data Support. That seems to be something around a bad gateway. but I'm not to sure. I think a trouble ticket would have to be filed and it advanced to ATSG...
On top of that, have them test the Internet2.voicestream.com, and internet3.voicestream.com provisionings on your account in what they call ihlr. also try to get them to do a cancel location.... have them re provision the acount (remove the apns and put them back), and maybe even remove the wap.voicestream.com and internetX.voicestream.com apns from the sim card and then resend the switch. that might work.
forewarn you they will go through these trouble shooting tips with you while you're on the phone. (the netsh commands)... but demand that they do the info above... and if you're still getting the HTTP Error, ask for a trouble ticket, now you will have to be on the phone and they do take a while, but it won't get filed unless you're on the phone with them. and the account HAS to be verified. so make sure you are either an Authorized User or the Account holder on the number you're calling about. Also make sure you're not on the device. they hate it, and it's against policy... They are an in bound call center and are unable to call customers back... but half the time they can't get through because they're number is blocked.
Hi xda'ers. I'm really hoping someone out there can help me. I've got an AT&T tilt. I purchased some software called webcamera plus by Ateksoft. It doesn't seem to work though. It won't connect the ppc to the pc through active-sync...although it should. my tilt just keeps trying to connect to a certain IP address. On my pc, it shows the software as waiting for a connection. I never get past that point. Would anyone have any ideas? Thanks in advance!!!!!!!!!!!!!!!!!!
2 things to check would b that the phone is set for advanced network functionality and also the same setting on pc's activesync. If not test ip address with ie? on pc to check for responce.
Also make sure you have the port settings right, and port forwarding may be needed (most likely will be). I'm using it and it works great.
um, try this:
if you're using it with wlm for example, start the webcam on the phone, and the annoying lil box will come up and it will look for an ip address, THEN send your webcam on wlm, nothing will happen...so cancel the webcam on the phone, (just press the action button to make the annoying lil box go away)....then try starting the webcam again, from your phone. it should then immediately find the ip address. it's really gay software!
hope this helps.
I'm having a similar issue, and the fix above didn't work. I've got "Auto-detect IP Address" unchecked, put in my laptop's network IP (192.168.2.6), forwarded port 2047 to 192.168.2.6 on my router...still nothing. It just endlessly tries to connect and the attempts counter just keeps ticking up, meanwhile my computer still says "Waiting for connection...". Am I doing something wrong here? Even if I check "Auto-detect IP Address", it does the same thing except it says "IP: 169.254.2.2" instead of "IP: 192.168.2.6" in the window. Do I need some kind of firewall setting or something? This has me stumped.
EDIT: I changed it so port 2047 forwards to 192.168.2.7 (my phone's LAN IP) and disabled my firewall. Still no dice.
I bought the app last tuesday and after a few tries I deleted it......it's buggy as hell.,,,waste of money.
tfdeere said:
Hi xda'ers. I'm really hoping someone out there can help me. I've got an AT&T tilt. I purchased some software called webcamera plus by Ateksoft. It doesn't seem to work though. It won't connect the ppc to the pc through active-sync...although it should. my tilt just keeps trying to connect to a certain IP address. On my pc, it shows the software as waiting for a connection. I never get past that point. Would anyone have any ideas? Thanks in advance!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
First, ensure you've installed the desktop software correctly. It loads the video device driver so Webcamera Plus will show up as an available video device in capture programs. Also I'm assuming here that you've properly installed the latest application on your phone. If you haven't go to the Ateksoft website and get the latest version.
Next verify that you have a working Activesync connection between your PC and phone. Some have indicated it's necessary to disable advanced network capabilites in the "USB to PC" control panel (under Start > Settings > Connections). You're mileage may vary, and seems dependant the ROM. I'm running the Faria WM 6.1 and I don't even see this option and the program still works fine on my system. Now connect your Kaiser to your PC.
Now launch your video capture program, or chat program that uses a webcam, or whatever you'd like to use Webcamera Plus with. You should be able to choose your video source, and if you've installed the Webcamera Plus desktop software correctly you should see it as an available video source. Choose it.
Finally, start the Webcamera Plus application on your Kaiser. Go to Menu > Settings > Network. Check the box to "Autodetect IP". If you're going to use Activesync instead of a TCP/IP connection then this must be checked. Click "Done", and then "Start". You should be connected!
If not then check the firewall settings on your PC. Maybe reinitialize the capture device in whatever program you're using on your PC to view the Webcamera Plus image / video stream. Good luck!
kmorris89 said:
I'm having a similar issue, and the fix above didn't work. I've got "Auto-detect IP Address" unchecked, put in my laptop's network IP (192.168.2.6), forwarded port 2047 to 192.168.2.6 on my router...still nothing. It just endlessly tries to connect and the attempts counter just keeps ticking up, meanwhile my computer still says "Waiting for connection...". Am I doing something wrong here? Even if I check "Auto-detect IP Address", it does the same thing except it says "IP: 169.254.2.2" instead of "IP: 192.168.2.6" in the window. Do I need some kind of firewall setting or something? This has me stumped.
EDIT: I changed it so port 2047 forwards to 192.168.2.7 (my phone's LAN IP) and disabled my firewall. Still no dice.
Click to expand...
Click to collapse
Your Kaiser is connected to your LAN via Wifi also, yes? In other words, both your laptop and your Kaiser are on the same network. If so, then you were on the right track setting up port forwarding to your laptop's IP address. If you have the right laptop IP address set in the Webcamera Plus software (on the phone), and the same port specified as you setup in your router, then it should work. If it doesn't then you may have a software firewall blocking your connection.
If you're phone is NOT connected to your LAN via Wifi then you're using the wrong IP address (192.168.2.6). You need to use your WAN IP, not your LAN IP, in the phone's Webcamera Plus network settings. If that doesn't work, and you're sure your router settings are correct, then you should probably take a close look at your firewall logs. Or try disabling it altogether for test purposes.
I ended up getting a different program which worked better, but the FPS was pretty crappy either way and the camera cut out every few seconds. Looking at actual webcam alternatives now instead of being cheap Thanks for your replies though, I appreciate it.
is this software freeware?
hi is the software webcamera v2.0 freeware or does it expire after a set amount of usage and then you have to pay? thanks
hi is the software webcamera v2.0 freeware or does it expire after a set amount of usage and then you have to pay? thanks
Click to expand...
Click to collapse
It expires after a few minutes you have to pay for the full version
I have Touch2 and Qtek 8310 (and Windows 7 32bit). I've install webcamera v2.1 and the problem is that it works with Qtek but not with htc touch2. Same settings on both phones but only with qtek i get image on skype and msn. Any ideas??? (qtek has WM 6.1 and touch WM 6.5)
web cam
where do u get this software from and can i use it on my handsets MSN? (tytn ii)
Hi guys. I'm really stuck now.
I have an O2 Stellar that I am trying to retrieve photos from on behalf of a colleague who needs them for work purposes.
The charger port is broken (thanks HTC) but will charge OK, just not be detected by a PC. I can't use an SD card in the device as these are blocked by the security software (which cannot be unistalled). Bluetooth is also disabled as a security protocol.
I THINK I may be able to connect this via Wireless as I can switch this on, and my question is: Can I connect the Stellar to a Wireless network and upload the files to another computer on the same network? Will this work do you think?
I would have tried it already but we don't have a wireless network here and it would mean taking it home to try.
WIFI Remote Acces
A very useful programm for exactly that kind of need is WIFI Remote Acces by Julien Manici.
Here's the link:
...
sorry, I am not permitted to post links because I am new...
I'll try an PM
hey buddy... here's the link from mobile9
http://gallery.mobile9.com/f/1144785/
hope u enjoy........ do leme knw
For some reason my X1 won't connect with wifi. It connects to the internet when I went on facebook I got to the log in screen but after trying to log in it says dns not available. Please help, also if anyone is from the Philippines here that has a X1 and got FBT and UBT on it please help. Smart or Globe. Thanks
Man, 100 plus views but still no respond? Come one, some out there please help me out.
1. try different web browser opera, uc browser,...etc
2. try connect with different connection wifi, activesync with pc/laptop connect to modem,...etc
3. try login different social web/mail, twitter, yahoo, gmail,...etc
4. try changing sim card on your country, smart, global,...etc
i'm sure one of them should work