Registry Hacks - Tilt, TyTN II, MDA Vario III General

I saw a thread over on the Mogul forum that had a huge list of reg edits for the mogul, all in one spot. I saw a nice edit I tried doing on my Tilt but the path wasn't there - it was to adjust the vibrate level. My vibrate is so loud when I'm in a meeting everyone looks over when it starts, it's louder than my wifes vibrator - lol
Anyways, if anyone knows where the edit for adjusting vibrate level is in the Kaiser registry can you let me know. I did a search but came up empty. I have the Kaiser tweak, but didn't see that on there.
Maybe this can be a thread where everyone posts their favorite reg edit.

No one???????????????????

take it easy
jackryan57 said:
No one???????????????????
Click to expand...
Click to collapse
3 hours and 18 minutes.
Give people a chance.
It's a big and busy world - people are doing things.
Someone will have an answer eventually - maybe not a solution . . .

I agree. But maby if you change the topic to something relevant to the question you could get you(our) answer.

In order to answer this I think we need more details.
Tell me more about your wifes vibrator

mattarse said:
In order to answer this I think we need more details.
Tell me more about your wifes vibrator
Click to expand...
Click to collapse
hahahahaha......nice reply

Related

Keep dialpad on while on a call?

I have to make a lot of calls to conference #'s and such, and I consistently find myself panicking when I have to enter a pin or entry code, because the back light has gone off (screen blank), and when I do figure out the right key to press to bring it up, the keypad is no longer there. I have to press the "show keypad" button. Usually by the time I figure that all out, if I haven't already inadvertently hung up the call, I've timed out for the response.
Anyway, making a short story long.... Is there anyway, while on a call, to keep the dialpad and backlight on?
kaiser tools. search. read
kireol said:
kaiser tools. search. read
Click to expand...
Click to collapse
I suspect you meant "Kaisertweak", not "kaiser tools". Thank you. I was able to weed out the reg hack to keep the backlight on longer. It wasn't clear that this also addresses keeping the keypad up.
mooshwa said:
I suspect you meant "Kaisertweak", not "kaiser tools". Thank you. I was able to weed out the reg hack to keep the backlight on longer. It wasn't clear that this also addresses keeping the keypad up.
Click to expand...
Click to collapse
one klick to the dial wheel will do also show the the dialpad.
mooshwa said:
I suspect you meant "Kaisertweak", not "kaiser tools". Thank you. I was able to weed out the reg hack to keep the backlight on longer. It wasn't clear that this also addresses keeping the keypad up.
Click to expand...
Click to collapse
And the final answer is... how do you do this. (Infallable ones: please spare us the read, search mantras...)
Bump
Bump. Anyone? Thanks in advance. This small change would really be a great useability enhancement for normal phone use.
KaiserTweak
Download KaiserTweak and disable Fast Sleep. There are a lot of tweaks included that make the Kaiser/Tilt better.
http://forum.xda-developers.com/showthread.php?t=333898
Name?
madmatt079 said:
Download KaiserTweak and disable Fast Sleep. There are a lot of tweaks included that make the Kaiser/Tilt better.
http://forum.xda-developers.com/showthread.php?t=333898
Click to expand...
Click to collapse
Is it just a very strange description for this reg tweak? "Fast Sleep" sounds totally different than "Disable Automatic Call Status Switching". Is this a 2 for 1 change? Can someone simply post the exact registry change, that is easier for me?
Bump (again)
Wow, lots of comment, incorrect and corrected comments. Potentially cryptic solutions. Anyone with a simple registry change. Sure would be much appreciated.
swamp2 said:
Wow, lots of comment, incorrect and corrected comments. Potentially cryptic solutions. Anyone with a simple registry change. Sure would be much appreciated.
Click to expand...
Click to collapse
Just download the F-ing application and make the change. It automatically changes the registry entry so you don't have to worry about it. Your question was answered, there's no need to bump this thread because it wasn't answered in the way you wanted it to be.
Thanks
Bellfazar said:
Just download the F-ing application and make the change. It automatically changes the registry entry so you don't have to worry about it. Your question was answered, there's no need to bump this thread because it wasn't answered in the way you wanted it to be.
Click to expand...
Click to collapse
Thanks man, really friendly and mature comment. Is there really a need to start with the "F-ing" language. Grow up, requesting a registry edit is really acceptable from my experience on this board. I simply prefer to manage all of my registry changes manually.
swamp2 said:
Thanks man, really friendly and mature comment. Is there really a need to start with the "F-ing" language. Grow up, requesting a registry edit is really acceptable from my experience on this board. I simply prefer to manage all of my registry changes manually.
Click to expand...
Click to collapse
Just to give you a heads up this program "KaiserTweak" works really well. I have used it myself now on 3 different ROMS and have had no issues. I highly recommend it.
You are all WRONG
kierol, Hejdemann, madmatt079, and Bellfazar.
You guys are ALL WRONG! OK some of you are only 50% wrong.
A particularly big "screw you" back to Bellfazar for the unjustified "know it all" and rude attitude. See below from PM-ing with KaiserTweak author Chainfire.
The point is that there are two separate issues, clearly delineated by mooshwa in reply #3.
From swamp2 to Chainfire:
Sorry to bother you with a PM. I really dig your program and all the great reg edits you have put together. I prefer to manage my reg mods manually. Folks keep telling me that there is a reg edit in your program that disables the automatic switching, after placing a call, from the keypad to the call status window of the dialer. I would simply like to disable this automatic switching and not change anything else. I would greatly appreciate you sharing this reg edit with me. By the way in case it is relevant I have the AT&T branded device with the AT&T dialer as well. Thanks in advance.
Click to expand...
Click to collapse
Reply from Chainfire to swamp2:
AFAIK there is no Tweak in KaiserTweak that does this, though it may be some side-effect of another tweak. If you are interesting in the tweaks themselves, read the XML document format description on the KaiserTweak page and just download KaiserTweak and review the XML file. All tweaks are in there.
Click to expand...
Click to collapse
Lastly just to be 100% clear I am using the disable fast sleep tweak and that works great but it IS NOT a side effect of this tweak to accomplish what I was posting about, disable automatic call status switching.

Keypad vibrate*UPDATED FOR 6.1*10-07-08

This .cab will create a short vibrate everytime you press a number when dialing a number.
***this is the updated version. Will only work on 6.1***
please report any problems.
I have noticed a quicker response time, i might be crazy to.
**for people with problems getting the error, install the second one**
Confirmed working on....
L26KDV12------------OUTSTANDING RESPONSE
HYPERDRAGONIIIPRO--SLIGHT DELAY BUT GOOD
ATT 6.0--WORKS DECENT
ATT 6.1--SUCKS ASS BUT WORKS
hey i just tryed the Cab Works great thanx!!!! =D
RussianTechno101 said:
hey i just tryed the Cab Works great thanx!!!! =D
Click to expand...
Click to collapse
Not a problem, ever since my wife got the motorola z9 it has tactile response (vib when button pressed) i thought it would be great for the tilt. I always miss a number using the dialer.
Perhaps the updated video drivers will provider a better response time on the touch screen...
*sigh* hope HTC actually follows through, otherwise I may lean a bit more toward another manufacturer next time (I like playing games during lunch breaks, and when i take the train -- most game's i've found, even basic ones that run on my T-Mobile Wing (HTC Herald), fail on the tilt :-(
KD8DNS said:
This .cab will create a short vibrate everytime you press a number when dialing a number.
Click to expand...
Click to collapse
Nice bro. You go from being banned for a week and come back with an app. To the mods, ban this guy some more. No telling what he will come back with.
J/K
P1Tater said:
Nice bro. You go from being banned for a week and come back with an app. To the mods, ban this guy some more. No telling what he will come back with.
J/K
Click to expand...
Click to collapse
i also created the voice command announcement fix, it fixes the problem of msvc 1.6 not announcing calls on the tilt. link here http://forum.xda-developers.com/showthread.php?t=388964
hey, so do the short or long tones need to be on? as i have them turned off and the vibrate feature doesn't work.
krkonose said:
hey, so do the short or long tones need to be on? as i have them turned off and the vibrate feature doesn't work.
Click to expand...
Click to collapse
long, and if that dosn't work let me know what rom, and dialer your using and ill do some troubleshooting. and are you sure the cab installed and.
Hey, I downloaded it and installed it but it wont work. I also noticed that when I punch in a number on the keypad, there is no tone. what should I do?
Thanks
I am using
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
WM 6.1
Thanks
KD8DNS said:
This .cab will create a short vibrate everytime you press a number when dialing a number.
Click to expand...
Click to collapse
...and this one should remove it!
tnyynt said:
...and this one should remove it!
Click to expand...
Click to collapse
thank you very much for that.
What is the difference between this vibrate keypad CAB and the previously released vibrate keypad CAB (as seen in this thread) ???
Charles
polyrhythmic said:
What is the difference between this vibrate keypad CAB and the previously released vibrate keypad CAB (as seen in this thread) ???
Charles
Click to expand...
Click to collapse
HA HA HA. Wow looks like someone else had the same idea about 3 years ago. Boy did i waste my time. But i guess to answer your question .zip vs .cab other than ripping it apart to inspect how it was written, and it was posted in the Magician forum. Oh well i guess i wasted my time, but on the other hand i hope people found it useful.
Argh, for me, nothing work, no vibrate, no sound.
yeantbron said:
Argh, for me, nothing work, no vibrate, no sound.
Click to expand...
Click to collapse
make sure dtmf short tones are on.
oups...sorry, sometimes, i'm very stupid lol
Thank you !!!
Hey this cab works great for me. Is there anything that will produce the same type of feedback for the soft keyboard? Or would that depend on the sip?
elypsar said:
Hey this cab works great for me. Is there anything that will produce the same type of feedback for the soft keyboard? Or would that depend on the sip?
Click to expand...
Click to collapse
Let me do a little reasearch.
I appreciate it!
KD8DNS said:
Let me do a little reasearch.
Click to expand...
Click to collapse
Any news on this at all?

Issue of Touch Sensor

Hi Guys,
I am using HTC Tilt and have some problems with my phone. The touch sensor is responding very much late. Would like to know how to make it faster... Awaiting for your suggestions..
same for me!
i don't know why,but after flashing it goes perfect!but after few days of use it becomes slow to response to finger and pencil touch...Anyone knows why,and possibly,how to heal this problem?thx anyway
just a guess but it probably has something to do with the registry although I don't know which setting
and a little side note: Mods will probably move this to the general section
I'm very sure that kaiserII101 is correct. I believe I remember reading about a registry value that will affect the pressure you must apply to the screen, and another that will affect delay or something. Not really a whole lot of help, but just my thoughts.
Dave
siddesh_0110 said:
Hi Guys,
I am using HTC Tilt and have some problems with my phone. The touch sensor is responding very much late. Would like to know how to make it faster... Awaiting for your suggestions..
Click to expand...
Click to collapse
Have you used the Touch control settings in "Schaps Advanced Configuration" or "Kaiser Tweak?
Both are available here on XDA...
tbryson92110 said:
Have you used the Touch control settings in "Schaps Advanced Configuration" or "Kaiser Tweak?
Both are available here on XDA...
Click to expand...
Click to collapse
Well I havn't tried it out.. could u guide me thru.. for the same..
siddesh_0110 said:
Well I havn't tried it out.. could u guide me thru.. for the same..
Click to expand...
Click to collapse
The utility is on the xda site, but I have no problem giving it to you.
There are a lot of other fun things in the program, just make sure you do a full back-up before you start messing around with it. ('Sprite' is great for this.)
It's a registry editor, but it is formatted in a multiple choice style, with "Advised" settings as well as "Default".

Mic sensitivity set

hi all my X1 is giving me issues with every radio i try.. please help
i live in Cape town South Africa
and id like to know if there is a .CAB that can boost my mic's sensitivity as when some one calls me i can hear them loud & clear but they cant here me well @all..
Thanks Damin
hi,
have a look at these settings of yours and if different adapt them, then soft rest and give it a try
maybe you have to modify InCall2 and InCall3 as well,didn't have problems with that and therefore haven't tried myself yet
gl though
\HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory
Default: 2
New Value: 1
\HKCU\ControlPanel\SoundCategories\InCall\InitVol
Default: 2 or 3
New Value: 10
DrakenKorin said:
hi,
have a look at these settings of yours and if different adapt them, then soft rest and give it a try
maybe you have to modify InCall2 and InCall3 as well,didn't have problems with that and therefore haven't tried myself yet
gl though
\HKCU\ControlPanel\SoundCategories\InCall\AttenuationCategory
Default: 2
New Value: 1
\HKCU\ControlPanel\SoundCategories\InCall\InitVol
Default: 2 or 3
New Value: 10
Click to expand...
Click to collapse
thanks DrakenKorin let me see if i can find that on the rom im using now... its genesis.one_1_0_WWE
ill let u know if it helps ..
any .cab file that can mod the mic sensitivity ?
Damin777 said:
thanks DrakenKorin let me see if i can find that on the rom im using now... its genesis.one_1_0_WWE
ill let u know if it helps ..
any .cab file that can mod the mic sensitivity ?
Click to expand...
Click to collapse
good, will be interesting to know
no cab here, search and I'm sure you will find something
DrakenKorin said:
good, will be interesting to know
no cab here, search and I'm sure you will find something
Click to expand...
Click to collapse
my eyes are red from searching ... this is about my 10th WM phone & i still have trouble finding things LOL
Damin777 said:
my eyes are red from searching ... this is about my 10th WM phone & i still have trouble finding things LOL
Click to expand...
Click to collapse
there are a few, problem is evaluating whether they are compatible with X1
for TP2
there are others...
tried
settings->Microphone AGC
AGC means Automatic Gain Control
which mean if the signal the microphone receive it will automatic inc the amplification of it

[Q] Vibration & Ringer at the same time

Is there a way to get the vibration and ringer run at the same time.... like the normal phones? I mean... vibrate runs while the ringer is running.
I hope you could help me... thanks!
I use Mozzart & HD2 running both WP7 and the same problem.
try this xap.
Download
Restore back to original
Download
ricsonrainer said:
Is there a way to get the vibration and ringer run at the same time.... like the normal phones? I mean... vibrate runs while the ringer is running.
I hope you could help me... thanks!
I use Mozzart & HD2 running both WP7 and the same problem.
Click to expand...
Click to collapse
You don't need a download to do what you want! Geez!
Go into Settings...Ringtones and Sounds...turn both ring and vibrate on. A simple 1,2, 3!!!
Geez Louise...doesn't anyone explore there phones and software anymore to see what features are accessible???
Let me elaborate further. My phone is set to ring and vibrate. However, when I receive a call, it just vibrates twice then ringer kicks in. The vibration stops after the ringtone plays. So if I miss the first two vibrations, I will miss the call id I cant hear the ringtone.
Thanks again for your help!
Sent from my HTC HD2 Gingerbread using XDA App
Tried the first download. Didn't work.
I tried the first download file. It's still the same. It first vibrate twice, then stops, the the ring sounds... no more vibrations after this.
oh sorry.. BTW this xap was work on my HD7 so i'll think it may work on your HD2 too.. .
You don't need a download to do what you want! Geez!
Go into Settings...Ringtones and Sounds...turn both ring and vibrate on. A simple 1,2, 3!!!
Geez Louise...doesn't anyone explore there phones and software anymore to see what features are accessible???
Click to expand...
Click to collapse
Funny you doesn't know this thing lol~.
If vibrate & ringtone was work in the same time, I no waste of time to create this thing.
Perlnx said:
oh sorry.. BTW this xap was work on my HD7 so i'll think it may work on your HD2 too.. .
Funny you doesn't know this thing lol~.
If vibrate & ringtone was work in the same time, I no waste of time to create this thing.
Click to expand...
Click to collapse
Hi Perlnx,
Thanks for your time helping me out. BTW, what's the difference of the first download compared to the second one?
I will try the second download later and see if it makes any difference. Have a nice day!
Ringer and Vibrates now work
ricsonrainer said:
Hi Perlnx,
Thanks for your time helping me out. BTW, what's the difference of the first download compared to the second one?
I will try the second download later and see if it makes any difference. Have a nice day!
Click to expand...
Click to collapse
Hi Perlnx,
Your first download file worked. I only sideloaded before and not deployed... that didn't work. However, I found it at the phone application menu and deployed this application.
Now I'm a happy man. It now vibrates all the time while the ringtone is running. It just doesn't pause though... just continue vibrating.
I will do the same with the mozart tonight.
Thanks for sharing your time and effort making this application file.
Hi Perlnx,
If you're still developing/improving this application, I think it's also a good idea to vibrate and pause. Sorry to ask...
It's just registry edit, I'll try to looking for a new key later.
The first one is import vibrate key into the phone
and the second one is delete the key and restore back to normal.
DID you search before you ask and post mate!!
i posted this solution since...
http://forum.xda-developers.com/showthread.php?t=986906
Perlnx please code me a lighty keypad to for more than 30 s i don't want to waste my battery!!!
waiting for the reg key...and not the deploy mate!!!
jianototi said:
DID you search before you ask and post mate!!
i posted this solution since...
http://forum.xda-developers.com/showthread.php?t=986906
Click to expand...
Click to collapse
jianototi,
I did search before I requested mate!!! Maybe you should separate RING&VIBRATE title on your post so it can be searched mate!!
Now try searching for "HD2 WP7 vibrate and ring"... see if you can find your own post mate!!
If you want to help others, just skip with the complain mate!!
I've been helped and helped others on this forum for quite some time now. I'ved seen stupid questions, but I just smile when I see one. You should do the same mate!!
jianototi,
Oh, did you also posted this:
http://forum.xda-developers.com/showthread.php?p=11460499
Please search before posting mate...
smile mate!!
ego is bad mate on XDA
it's not you what i meant but the solution that came in less than 50 min...i meant..
ricsonrainer said:
jianototi,
Oh, did you also posted this:
http://forum.xda-developers.com/showthread.php?p=11460499
Please search before posting mate...
Click to expand...
Click to collapse
SO WHAT !!!! explain please
Well, when I requested for help, I got the answer without complain from somebody. Your complain was not needed anymore.
And while you posted that UNSUPPORTED opinion with dual booting, did you receive any comment like "DID YOU EVER EVEN SEARCH BEFORE YOU POST?" None... so why do like offending people when it's not needed?
ricsonrainer said:
Well, when I requested for help, I got the answer without complain from somebody. Your complain was not needed anymore.
And while you posted that UNSUPPORTED opinion with dual booting, did you receive any comment like "DID YOU EVER EVEN SEARCH BEFORE YOU POST?" None... so why do like offending people when it's not needed?
Click to expand...
Click to collapse
haha so read my mail mate..,well do ur work mate! And I'll do my! search again mate and look for backup software that people began to ask after my post
that post was to help others and not to be saved hhee...
Anyway last post for u..
ricsonrainer said:
Well, when I requested for help, I got the answer without complain from somebody. Your complain was not needed anymore.
And while you posted that UNSUPPORTED opinion with dual booting, did you receive any comment like "DID YOU EVER EVEN SEARCH BEFORE YOU POST?" None... so why do like offending people when it's not needed?
Click to expand...
Click to collapse
haha so read my mail mate..,well do ur work mate! And I'll do my! search again mate and look for backup software that people began to ask after my post
that post was to help others and not to be saved hhee...
Anyway my last reply on u,..

Categories

Resources