Hello around,
i wanted to change the volume of the speaker during a call and it didn't work.
What happened? In Standby it was alwyas possible to press the "Volume up/down" button located at the side of the phone and I saw the black "scroll-bar" that changed left/right. That thing doesn't appear anymore.
Anyone with the same problem? Can you help me please?
I've installed some software and made some of the known reg-tweaks, but nothing special...
Thx 4 help!
homerjs_77
homerjs_77 said:
Hello around,
i wanted to change the volume of the speaker during a call and it didn't work.
What happened? In Standby it was alwyas possible to press the "Volume up/down" button located at the side of the phone and I saw the black "scroll-bar" that changed left/right. That thing doesn't appear anymore.
Anyone with the same problem? Can you help me please?
I've installed some software and made some of the known reg-tweaks, but nothing special...
Thx 4 help!
homerjs_77
Click to expand...
Click to collapse
Let's start with the basics:
What software and reg tweaks? Have you tried a soft reset?
Related
I can't see any similar problems on the forum, so can anyone help?
Yesterday my Kaiser's power button stopped working. In the middle of the day, not doing anything with it, installing anything or changing any settings. I took it out of my pocket and the screen was on with the power off dialog box showing (I normally keep it on standby in my pocket) The power button wouldn't put it into standby, and holding it wouldn't power it down. Intermittently the power off dialog appears on screen, if I click yes the device restarts (doesn't stay off). Everything else seems to work normally still. Soft resetting works normally. All the other buttons seem to work ok. I've tried a hard reset, but that made no difference.
Anyone else have anything like this?
no but i think ur power button seems to be stuck.. take it to ur local att store and see if they can help u out or try pressing and see it becomes unstuck.
omk298 said:
I can't see any similar problems on the forum, so can anyone help?
Yesterday my Kaiser's power button stopped working. In the middle of the day, not doing anything with it, installing anything or changing any settings. I took it out of my pocket and the screen was on with the power off dialog box showing (I normally keep it on standby in my pocket) The power button wouldn't put it into standby, and holding it wouldn't power it down. Intermittently the power off dialog appears on screen, if I click yes the device restarts (doesn't stay off). Everything else seems to work normally still. Soft resetting works normally. All the other buttons seem to work ok. I've tried a hard reset, but that made no difference.
Anyone else have anything like this?
Click to expand...
Click to collapse
I'm having the exact same problem right now. The power button definitely seems to be stuck. Can't figure out how to unstick it
About a week ago I had a similar problem.
The power button and the photo button stopped working. I couldn't turn the the device off or set it to standby.
Had to soft reset and after that it was ok again.
Draqula said:
About a week ago I had a similar problem.
The power button and the photo button stopped working. I couldn't turn the the device off or set it to standby.
Had to soft reset and after that it was ok again.
Click to expand...
Click to collapse
What do you mean by soft reset? Just pushing the little button at the botttom?
bTrizzy said:
What do you mean by soft reset? Just pushing the little button at the botttom?
Click to expand...
Click to collapse
Yep thats the ticket.
thetruth1985 said:
Yep thats the ticket.
Click to expand...
Click to collapse
Well that didnt work! Any other solution?
Is it possible to unmap the power button and map that question to another button???
I will try to explain the problem as simple as possible even if it's not.
The problem is as following: after closing "opera" and I disconnect from WIFI after awhile being used pressing immediately the "hang up buttom" to enter into the rapid menu or the specific function that I selected, it does not do what it's suppose to but the touch flow iscons scroll towards the right. The only solution to abilitate once again the original fucntion is to do a soft reset.
Can you help me?
thanks
I have been experiencing something similar. Sometimes a press on the end call button seems to be registered by the phone as a "move right" command. I have no idea what it is. Can anyone help? After I go back "home" everything seems ok.
Maybe that touch pad at the bottom is not as good as it should be?
ok but why after soft reset the button turn ok?
please help me
Hello guys,
I´ve got a little Problem with my diamond.
I´ve set up my "End Call" button to lock the device, if pressed a few seconds.
Sometimes after a call this does not work. Instead of locking the phone, the button acts as "Cursor right" button and scrolls trough the tf3d tabs ...
Putting the phone into sleep mode and wake it up again makes the button act as normal.
I had this problem with the original T-Mobile 1.93 Rom, and also with AZTOR V7, which I flashed a few days ago (great ROM btw. )
Any ideas?
I guess you need to press it accurately, try to press it as much right and bottom as possible
charlie42 said:
I guess you need to press it accurately, try to press it as much right and bottom as possible
Click to expand...
Click to collapse
No.. i have the same problem.
charlie42 said:
I guess you need to press it accurately, try to press it as much right and bottom as possible
Click to expand...
Click to collapse
No, it´s definitely not a hardware problem. It works again, if you put the phone to sleep for a second, or if you reconfigure the call end button in the system settings.
kodbg said:
No.. i have the same problem.
Click to expand...
Click to collapse
Nice to be not alone ...
I´m searching throug the forums for about two weeks now, and I haven´t found anybody describing this problem yet!
I have a strange problem, the call button and the home button work perfectly, also the arrow up, down and left do their job,
but if i press the back button, end call or right arrow button (i need to press really hard to get some sort of respone) all of them work as the back button, no matter where i click on the right side of the navi board.
when i try to call somebody, the end call button works only if i press it about 2 seconds after the call button, but once the call is conected it won't work, neither when i hold it, it's just not working, and the right arrow button i need to press about 50 times to move right, and then another 50 times...
i tried to reflash another ROM, but the problem still remains
did anyone have a similar problem?
Is this this a software of hardware problem?
Did anyone manage to solve this problem?
damir-bosna said:
I have a strange problem, the call button and the home button work perfectly, also the arrow up, down and left do their job,
but if i press the back button, end call or right arrow button (i need to press really hard to get some sort of respone) all of them work as the back button, no matter where i click on the right side of the navi board.
when i try to call somebody, the end call button works only if i press it about 2 seconds after the call button, but once the call is conected it won't work, neither when i hold it, it's just not working, and the right arrow button i need to press about 50 times to move right, and then another 50 times...
i tried to reflash another ROM, but the problem still remains
did anyone have a similar problem?
Is this this a software of hardware problem?
Did anyone manage to solve this problem?
Click to expand...
Click to collapse
To exclude, that this is a software problem do the following:
1. shut down the phone
2. take the battery out for a few seconds and insert it again
3. flash the original latest version of your provider rom (if it's a xda diamond, then flash the latest O2 rom, and so on if it's orange, t-mobile, vodafone ...)
4. after you setup the rom, make a hard reset
5. now have a look; does the issue persist? If yes, then it's shurely a hardware problem
Hi,
I recently pressed the "Touch key FW update" button. All of a sudden the menu and back button stopped responding. The lights go on when I press the home button but that is all it does.
Can anyone help with this? I've tried searching the forums for answer but couldn't find anything related to this.
Thanks.
Monkichi-1224 said:
Hi,
I recently pressed the "Touch key FW update" button. All of a sudden the menu and back button stopped responding. The lights go on when I press the home button but that is all it does.
Can anyone help with this? I've tried searching the forums for answer but couldn't find anything related to this.
Thanks.
Click to expand...
Click to collapse
Have you tried? pull out the battery, soft reset, factory reset