Hello guys,
I´ve got a little Problem with my diamond.
I´ve set up my "End Call" button to lock the device, if pressed a few seconds.
Sometimes after a call this does not work. Instead of locking the phone, the button acts as "Cursor right" button and scrolls trough the tf3d tabs ...
Putting the phone into sleep mode and wake it up again makes the button act as normal.
I had this problem with the original T-Mobile 1.93 Rom, and also with AZTOR V7, which I flashed a few days ago (great ROM btw. )
Any ideas?
I guess you need to press it accurately, try to press it as much right and bottom as possible
charlie42 said:
I guess you need to press it accurately, try to press it as much right and bottom as possible
Click to expand...
Click to collapse
No.. i have the same problem.
charlie42 said:
I guess you need to press it accurately, try to press it as much right and bottom as possible
Click to expand...
Click to collapse
No, it´s definitely not a hardware problem. It works again, if you put the phone to sleep for a second, or if you reconfigure the call end button in the system settings.
kodbg said:
No.. i have the same problem.
Click to expand...
Click to collapse
Nice to be not alone ...
I´m searching throug the forums for about two weeks now, and I haven´t found anybody describing this problem yet!
Related
hi, pls how it is possible to reaply the factory settings and the whole stuff like office...ive tried it like on my vap compact ii or mpx200 and it doesnt works
thx
heh, ive got it already it was the aplpication expret->clear storage,im a little bit surprised, ive expected that it would be somehow possible like in the past, hold some button, then turn on...
but my question statys, is it possible to hardreset it also withoutto go inside the system? it can be, that it crashes and i do not have access to this application
thx
look on the s710 wiki
try pressing both soft keys and the press the on button for a 0.5 seconds, then release the 2 softkeys.
qtek_metanol said:
try pressing both soft keys and the press the on button for a 0.5 seconds, then release the 2 softkeys.
Click to expand...
Click to collapse
yeah, ive already found it, thx...
Good evening, guys!
I have a very strange problem, I'm new to PPC scene and bought a HTC TyTN II for christmas. I flashed my ROM and I'm using Dutty's Rom... I noticed that the "green phone" hard key isn't working. I think it worked before flashing, because when I pressed the button it opened my Contacts, now nothing happens, even the light of the pad doesn't go on. Is it a hardware issue or software? I really don't want to do a hard reset, because I did it a couple of times...
No suggestions?
I did a hard reset, but the problem's still here.. it might be a hardware issue.
But how could I know? Or maybe it's the radio?
Please help me!
I've changed the radio to 1.27.12.17 but the problem's still here... I'm really confused. When somebody calls me there's no way to answer him. Very strange. Is there a button mapping program, that can change these buttons? I'll be happy if I can use the start button as the "green phone" button if there's no solution...
I dont know how to fix your button problem but as to answering phone calls, when someone calls it should say answer on the bottom left corner of your screen and you can press it to answer.
jasonrush said:
I dont know how to fix your button problem but as to answering phone calls, when someone calls it should say answer on the bottom left corner of your screen and you can press it to answer.
Click to expand...
Click to collapse
Thanks. I noticed that it's a hardware problem... when I press it very hard it works... strange. Do I need to change to the default HTC ROM if I want to give my device for fixing?
Yes. Look at the Wiki and the sticky threads. The process is detailed there.
i´ve noticed today that my "green or call" button is not responsive.
I have to press many times to enter the phone, and also to select a number in contacts and make that call.
Anyone had this problem?
I made a hard reset because it might be some software i installed and the problem is still there
no one are having or had this issue?
Try a soft reset, the touchpad with the buttons often looses it's way.
tnyynt said:
Try a soft reset, the touchpad with the buttons often looses it's way.
Click to expand...
Click to collapse
Yes i did, and also tried another rom beside de original.
I can say, that some times work and sometimes don´t work that well, but even without a reset it starts to work again but with some flaws.
I´m starting to suspect that this is a normal situation on most of the diamonds and no one has ever talked very much about it
I own my diamond for about a month and it only started to do this a week ago, that´s very very strange.
battax said:
no one are having or had this issue?
Click to expand...
Click to collapse
Every now and them my soft touch panel loses it's way.
Here's what I do to reallign it: either press on the bottom right corner twice or soft reset.
tnyynt said:
Every now and them my soft touch panel loses it's way.
Here's what I do to reallign it: either press on the bottom right corner twice or soft reset.
Click to expand...
Click to collapse
Even with a soft reset sometimes the problem continues.
I don´t understand your ideia, so the call button have something to do with the soft touch (whell?) they are connected?
When you say press bottom right corner, you say press the disconnect button? and it solves the irresponsive call button?
Do you know anyone with a diamond having this issue? It seems to me like a hardware problem.
It´s very very anoying and it drives me crazy.
Today the call button is working flawless, so i don´t understand this, send to warranty or not
Does anyone have issues with the keypad?
I think that some people are starting to have problems with it.
ok this is weird..all my keys aren't working at all incl. the volume key except the home key..even the touch-sensitive scrolling doesn't work. Oh and the phone keypad, compact qwerty and full qwerty (if T9 is on) don't work too......!
ok this is weirder..long press end key works...I suppose my problem is software?
okayyyyyyyy even weirder..it's fixed. I uninstalled Cyberon Voice Commander and Remote Desktop Mobile. I have a feeling it's Remote Desktop. However, it was fine when I first installed both programs so I have no idea what triggered the problem......maybe because I left my phone at the post office?!
attakorn said:
okayyyyyyyy even weirder..it's fixed. I uninstalled Cyberon Voice Commander and Remote Desktop Mobile. I have a feeling it's Remote Desktop. However, it was fine when I first installed both programs so I have no idea what triggered the problem......maybe because I left my phone at the post office?!
Click to expand...
Click to collapse
Some application cause that symthons in the hardware buttons, but in my case i don´t none installed and also i don´t have no app to mapp hardware buttons.
I guess it´s a hardware flaw in my case.
Hi everyone,
I got a HTC Tytn 2 and i have a problem with it.
When i boot the phone it starts up and goes into windows like every windows mobile phone.
But when i press the standby button my screen wont go out of standby.
Only when i reset the phone it will work again.
Anyone got idea's ?
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
WGN88 said:
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
Click to expand...
Click to collapse
Have you at least tried backing up your data and doing a hard reset first ?
Yes, and i have also tried to put on a new rom and even updated the radio.
Iam a little bit out of idea's...
here are some more ideas:
1. how to test the power button: you say pressing the power button does not wake up the device once it goes to sleep. conversely, does pressing the power button put the device to sleep while the screen is on? if the power button is unable to make the device go off->on as well as on->off, then the power button is likely broken. if pressing the button achieves on->off, then the power button is probably ok and some software issue becomes more likely.
2. how to enable wake on pressing ANY hardware button: look for an option in Settings. i can't tell you the exact option because the ROM i am using does not have a link for this option, but this option does exist 100% in stock ROM and in lots of other ROMs. it contains settings like "Lock all buttons except power button" and "Keep all buttons unlocked" or something similar. by using the second option, pressing ANY hardware button while the screen is off will wake up the device.
3. you can use AE button plus to perform even more advanced button (re)mappings.
4. just to be sure that your device is really working correct, does the screen wake up when you call the phone or when you receive a text message? if it does not wake up even then, then search for "sleep of death".
Thanks for the response.
I think its a Service of Death problem.
Because when i try calling/smsing it, it wont go on
The buttons do work then...hopefully there's a fix for this problem...
Oke, i tried switching to 2G or 3G only but that didn't fix my Standby of Death.
I also bought a new sim card of vodafone so i wont get a No Sim error.
But what can i do now about it...it hangs like every 5 min...
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
WGN88 said:
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
Click to expand...
Click to collapse
Maybe it's hardware and something is coming loose
I have a strange problem, the call button and the home button work perfectly, also the arrow up, down and left do their job,
but if i press the back button, end call or right arrow button (i need to press really hard to get some sort of respone) all of them work as the back button, no matter where i click on the right side of the navi board.
when i try to call somebody, the end call button works only if i press it about 2 seconds after the call button, but once the call is conected it won't work, neither when i hold it, it's just not working, and the right arrow button i need to press about 50 times to move right, and then another 50 times...
i tried to reflash another ROM, but the problem still remains
did anyone have a similar problem?
Is this this a software of hardware problem?
Did anyone manage to solve this problem?
damir-bosna said:
I have a strange problem, the call button and the home button work perfectly, also the arrow up, down and left do their job,
but if i press the back button, end call or right arrow button (i need to press really hard to get some sort of respone) all of them work as the back button, no matter where i click on the right side of the navi board.
when i try to call somebody, the end call button works only if i press it about 2 seconds after the call button, but once the call is conected it won't work, neither when i hold it, it's just not working, and the right arrow button i need to press about 50 times to move right, and then another 50 times...
i tried to reflash another ROM, but the problem still remains
did anyone have a similar problem?
Is this this a software of hardware problem?
Did anyone manage to solve this problem?
Click to expand...
Click to collapse
To exclude, that this is a software problem do the following:
1. shut down the phone
2. take the battery out for a few seconds and insert it again
3. flash the original latest version of your provider rom (if it's a xda diamond, then flash the latest O2 rom, and so on if it's orange, t-mobile, vodafone ...)
4. after you setup the rom, make a hard reset
5. now have a look; does the issue persist? If yes, then it's shurely a hardware problem