Downgrade to original SPL & ROM (red numbers) - P3600 Software Upgrading

Hi!
I am having problems with my trinity and I need to send it to customer support, so I loaded SSPL and flashed back the original ROM as described here.
The problem is now, that at startup, red numbers still appear as shown in the attached picture. I am pretty sure that these numbers were not there before I upgraded to HardSPL and WM6 (bepe WM6 ger 0.79). When I enter the boodlader manually, it says "SSPL". What went wrong? How can I get rid of these numbers and return original device state?
PS: The reason why I need so send my trinity back to HTC is, that the device often crashes at startup or during runtime and the screen freezes with some graphical errors, which can also be seen on the attached image.

i think that numbers appear in the original bootloader, i remember that...

Hmm, I thought the numbers first appeared after switching to Hard-SPL, but maybe I am wrong. Can anymode else remember the initial state, or has anymode send his device to HTC with the numbers shown at startup?

staubsaug said:
Hi!
I am having problems with my trinity and I need to send it to customer support, so I loaded SSPL and flashed back the original ROM as described here.
The problem is now, that at startup, red numbers still appear as shown in the attached picture. I am pretty sure that these numbers were not there before I upgraded to HardSPL and WM6 (bepe WM6 ger 0.79). When I enter the boodlader manually, it says "SSPL". What went wrong? How can I get rid of these numbers and return original device state?
PS: The reason why I need so send my trinity back to HTC is, that the device often crashes at startup or during runtime and the screen freezes with some graphical errors, which can also be seen on the attached image.
Click to expand...
Click to collapse
What numbers do you see, if you step manually to bootloader?

fktsndr said:
What numbers do you see, if you step manually to bootloader?
Click to expand...
Click to collapse
TRIN100
IPL-0.50
TRIN100
SPL-1-07.0000

agreed
Flashed the same bepe version and it shows up same screens - trying to switch to another ROM (pref. the LIT), for too many drop out issues with the german bepe 0.79 (esp. with TT6 and Dialer) but cannot even get it to run the vodafone WM5 again - due to a broken cable, as I realize now - ok, we´ll see how far the LIT will LEAD

I have an original device with WM5, not yet upgraded, and I have the same red numbers.

staubsaug said:
TRIN100
IPL-0.50
TRIN100
SPL-1-07.0000
Click to expand...
Click to collapse
Everything is ok, this is the original HTC ipl and spl!

okay, thanks! I am going so send my trinity back to htc then.

Hey!
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.

Everything went well and I received a brand new trinity today.

gepino77 said:
Hey!
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.
Click to expand...
Click to collapse
beware : read the wiki could be helpfull for your knowledge...

staubsaug said:
Everything went well and I received a brand new trinity today.
Click to expand...
Click to collapse
Good ....

Related

Remove your Operator Splash Screen ;-)

Ok Friends, you hate the T Mobile Operator Splash Image ? I too.
It looks like http://img9.imagepile.net/img9/25963wm6_default.png
Flash with RUU NoId the nk.nbf file.
It remove only your Operator Image not your OS !
Have Fun
Let me know if you have better Images.
McSteff
Doesn't work for me, but thanks anyway
When I try this it comes up with ERROR [300] INVALID UPDATE TOOL
I have used lokwiz to CID unlock and SIM unlock but I still get this error.
Is there any way to apply this to my device?
Thanks
littld said:
When I try this it comes up with ERROR [300] INVALID UPDATE TOOL
I have used lokwiz to CID unlock and SIM unlock but I still get this error.
Is there any way to apply this to my device?
Thanks
Click to expand...
Click to collapse
My Phone is unlocked.
I set him in Bootloader Moder and run the RUU, it takes a few seconds and the new Operator Logo is flashed.
McSteff
have i understood this correctly?
does the image: http://img9.imagepile.net/img9/25963wm6_default.png become the operator logo instead of standard t-mobile logo, before wm5 or wm6 splashscreen come up?
and also no changes to OS are made - be that wm5 or wm6?
thanks for clarifying
anonymous1 said:
have i understood this correctly?
does the image: http://img9.imagepile.net/img9/25963wm6_default.png become the operator logo instead of standard t-mobile logo, before wm5 or wm6 splashscreen come up?
and also no changes to OS are made - be that wm5 or wm6?
thanks for clarifying
Click to expand...
Click to collapse
Yes, when you SoftReset it comes the new Logo, than Ipl,Spl.... and than the Windows Logo, but the stupid white T Mobile Logo is gone - forever ;-)
And there are no changes about your ROM, no Hard Reset !
It replaces only the Operator Logo.
McSteff
mcs said:
Yes, when you SoftReset it comes the new Logo, than Ipl,Spl.... and than the Windows Logo, but the stupid white T Mobile Logo is gone - forever ;-)
And there are no changes about your ROM, no Hard Reset !
It replaces only the Operator Logo.
McSteff
Click to expand...
Click to collapse
another question if i may?
how do i get the 'stupid white T Mobile Logo' back should i choose to? and by going back i would hope no OS features will be altered?
thanks
you will have to download the splash from internet, or someone could upload it to you, or... you could just perform a HR
anonymous1 said:
another question if i may?
how do i get the 'stupid white T Mobile Logo' back should i choose to? and by going back i would hope no OS features will be altered?
thanks
Click to expand...
Click to collapse
When you flash Aku 3 the T Mobile Operator Logo should be there.
McSteff
Hi, two questions.
1. Does this work when the phone is CID locked? my ipl and spl is 2.06 and can't unlock CID with lokiwiz which only works with 1.xx, and can't flash old ROM bacause most roms say upgrade only and the only one that i found that does not check this, crashes in Vista...
2. And also, I've had lots of problems running different RUUs on Vista (they crash). Do you know if this one does?
Thanks for your help.
Oh, and I have really cool Prince of Persia flash images. Attaching if anyone wants.
damac said:
Hi, two questions.
1. Does this work when the phone is CID locked? my ipl and spl is 2.06 and can't unlock CID with lokiwiz which only works with 1.xx, and can't flash old ROM bacause most roms say upgrade only and the only one that i found that does not check this, crashes in Vista...
2. And also, I've had lots of problems running different RUUs on Vista (they crash). Do you know if this one does?
Thanks for your help.
Oh, and I have really cool Prince of Persia flash images. Attaching if anyone wants.
Click to expand...
Click to collapse
1. Hmm, i dont know if it works on locked phones. My phone is unlocked and ipl/spl 3
2. Dont flash with Vista, RUU didnt work on this plattform, i´ve flashed my phone on xp.
McSteff
Finally it works!
Right, I have no idea why this has worked but it has. I have been trying to get rid of the TMobile logo for ages and I always get the Error 300 get a new update utility error.
What seems to have worked it applying the Radio rom update first (from Pedro12 - http://www4.turboshare.de/v/454059/X...61.21.rar.html) and then applying it.
I did this by replacing the nk.nbf rado file with the one from the splashscreen zip. I now no longer have TMobile on my phone, EVER! Thanks to the people in the community helping us to get the most out of these phones.
I think my phone is CID locked and yet am running WM6 (2.5) and no TMobile splash screen! I just now need to get a life....(!)
Fantastic! works first time! using latest Charmer WM6 ROM
mcs said:
Let me know if you have better Images.
Click to expand...
Click to collapse
Not better, but ... different. Could you do a version with just a black background, no image?
Cool.

Need super help with dopod d810!!! Upgrade ERROR!!!!

i went to the website
www.asia.htc.com/asia/event/WM6/index.html
and followed the on-screen instruction
what happened now is that there's an update error
i followed the step by step to recover but the thing just stuck there
now whenever i on my dopod d810,
my screen just shows the 3 color screen
and that's that
i dont know what to do!!!
help!
and this is crap
i cant seem to establish a connection AT ALL with the activesync
and whenever i want to update, it just says ERROR [286]
i did ALL the steps it suggested
- disconnect USB cable from phone
- remove the battery
- wait 3 seconds and reinstall
- when you switch on, you see 3 screens
- connect USB cable again
- resume install
and then after i resume install,
SAME PROBLEM again! ERROR [286]
its like a vicious cycle!
Just for your info
i am currently using activesync 4.5
and right now whenever i connect my usb to my phone,
the activesync doesnt seem to be able to detect the phone at all
here is the video of my several attempt to upgrade
just download it here
http://www.sendspace.com/file/ha26ws
Is there anywhere where i can download
WM6 for
- Hong Kong (ENG)?
what happened is that right now
i actually used the Aussie one and that doesnt work i think
(assuming that is the problem)
I tried the SEA one and it also doesnt seem to work
I heard that you need to use specific update
the problem is
i dont know where my dopod originate from???
is there any way to tell?
what does the tri-colour screen say?
you can check out trinityguides upgrade problem faq and see if those steps help you.. all isn't lost yet, you should be able to revive your device
let me know how it goes
the TRI screen color says
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
ive seen the faq
doesnt help me at all
I think i might need to flash back to WM5 first
problem is,
where can i download the WM5?
Stalvros said:
I think i might need to flash back to WM5 first
problem is,
where can i download the WM5?
Click to expand...
Click to collapse
here http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
yeah, flashing back to wm5 is a safe bet at this point...
have you tried splxploit?
thanks~
i actually fixed this problem yesterday
i found that link that you gave
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
through this
http://xman892.blogspot.com/
the strange thing is that~
the WM6 that that guy use doesnt seem to have any transcriber
while the official WM6 latest version has
It's not strange at all. The rom that you downloaded is a cooked rom. I think the cook removed any excessive stuff and so you may not find everything you want there.
Stalvros said:
the TRI screen color says
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
ive seen the faq
doesnt help me at all
Click to expand...
Click to collapse
try this, it solve my problem just like yours!!!
http://vimafeje.com/splxploit-windows.zip

kaiser not starting

ok, some urgent help needed, yesterday ok, today will not start. only get as far as, 'smart mobility' R1.27.12.32 G22.45.88.07H D 1.56.00.00
phone is standard WM6 HTC. i have the 6.1 image for upgrading and tried to load using SD card, i get past tri colour screen, then loading, then checking then 'not allowed' and back to tri colour. it says KAIS130, SPL-1.93.000 CPLD-8. what?next
any help appreciated guys......
gazzacbr said:
ok, some urgent help needed, yesterday ok, today will not start. only get as far as, 'smart mobility' R1.27.12.32 G22.45.88.07H D 1.56.00.00
phone is standard WM6 HTC. i have the 6.1 image for upgrading and tried to load using SD card, i get past tri colour screen, then loading, then checking then 'not allowed' and back to tri colour. it says KAIS130, SPL-1.93.000 CPLD-8. what?next
any help appreciated guys......
Click to expand...
Click to collapse
To Flash a ROM you'll most likley need Hard SPL
Follow the "Getting Started" Link in my Sig.
If you cannot get WM to boot, you'll need to re-flash your orginal carriers ROM.
Ta
Dave
thanks for quick reply DaveShaw. fell at the first though, site for 'Cmonex's HardSPL 3.29SD' is blocked here in UAE, dont know why. are there any other links?
gazzacbr said:
thanks for quick reply DaveShaw. fell at the first though, site for 'Cmonex's HardSPL 3.29SD' is blocked here in UAE, dont know why. are there any other links?
Click to expand...
Click to collapse
You shouldn't be using cmonex's SD method the first time round. It is for upgrading only.
I have downloaded the package from point 2 (you should follow the USB method in post 3, NOT the SD set) and have upload it onto my site, please let me know when you are done with it.
http://taeguk.co.uk/xda/HardSPL and CidUnlocker.zip
Ta
Dave
ok, thanks DaveShaw, i have downloaded those files. the method in step 2 involves copying the jump progs to the device memory, which i do not have access to as it will not start. can i just copy to the sd card? thats why i was trying to flash a standard rom. i need a solution that will work just from the card. will the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar load using what i have on my phone now? i assume that the spl gets replaced when i upgrade to 6.1 with htc ruu. i can try anything as i have nothing to lose now (do i?)
gazzacbr said:
ok, thanks DaveShaw, i have downloaded those files. the method in step 2 involves copying the jump progs to the device memory, which i do not have access to as it will not start. can i just copy to the sd card? thats why i was trying to flash a standard rom. i need a solution that will work just from the card. will the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar load using what i have on my phone now? i assume that the spl gets replaced when i upgrade to 6.1 with htc ruu. i can try anything as i have nothing to lose now (do i?)
Click to expand...
Click to collapse
Enter your bootloader and try flashing any ROM supplied by your carrier to get into Windows Mobile.
What screen do you get stuck on? If it is the tri color screen check out the link in my signature.
Ta
Dave
Hi again, i am not actually 'stuck' on the screen as i can get into the loader, its just that i get the message saying that the (newer) rom will not load. i am extending my (c)rapidshare as free will not let me down load the 'standard' rom, then i will try that (just had to re-initialise my paypal and the passwords are on eWallet the phone, so ive reloaded the eWallet on my pc and ....so it goes on zzzzzzzzzz its funny how these things spiral down - not).
is there any way to update the spl only from the sd card?
gazzacbr said:
Hi again, i am not actually 'stuck' on the screen as i can get into the loader, its just that i get the message saying that the (newer) rom will not load. i am extending my (c)rapidshare as free will not let me down load the 'standard' rom, then i will try that (just had to re-initialise my paypal and the passwords are on eWallet the phone, so ive reloaded the eWallet on my pc and ....so it goes on zzzzzzzzzz its funny how these things spiral down - not).
is there any way to update the spl only from the sd card?
Click to expand...
Click to collapse
No.
Can your phone boot into Windows or not?
Ta
Dave
Hi, no, it will not boot to windows. just been reading around while 'RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship' is downloading. ive got connected with mtty and get cmd>. when i type boot i get 'Command Error !!!' i assume thats not good, i think rom is corrupted. tried standard HTC 6.1 RUU_Kaiser_HTC_FIN_3.29.414.0_radio_sign_25.83.40.02_1.65.17.56_Ship version 3.14.4.1 again on USB and after phone says 1% also message saying that it will not load error 294: invalid vendor id
gazzacbr said:
Hi, no, it will not boot to windows. just been reading around while 'RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship' is downloading. ive got connected with mtty and get cmd>. when i type boot i get 'Command Error !!!' i assume thats not good, i think rom is corrupted. tried standard HTC 6.1 RUU_Kaiser_HTC_FIN_3.29.414.0_radio_sign_25.83.40.02_1.65.17.56_Ship version 3.14.4.1 again on USB and after phone says 1% also message saying that it will not load error 294: invalid vendor id
Click to expand...
Click to collapse
Yeah, you need the ROM your carrier supplied.
Where is the Phone from?
Does a Hard Reset help?
Ta
Dave
woo hoo, yippeeeeeeeeeeeeee. the kaiser lives. back to standard 6.0 rom. cheers, i owe you a beer (or 2) if you are ever in abu dhabi, let me know ;-)
i can reload all from sprite backup (only from yesterday) to get me going again
but..... next will try to replace spl and then load 6.1. not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
HardSPL 3.29 is first (yes?) then will try Kaiser_HTC_ASIA_HK_WWE_3.34.721.2 which sounds good. one more thing, my phone is not locked so do i need to do the 'SIM and CID-Unlock'
gazzacbr said:
woo hoo, yippeeeeeeeeeeeeee. the kaiser lives. back to standard 6.0 rom. cheers, i owe you a beer (or 2) if you are ever in abu dhabi, let me know ;-)
i can reload all from sprite backup (only from yesterday) to get me going again
but..... next will try to replace spl and then load 6.1. not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
HardSPL 3.29 is first (yes?) then will try Kaiser_HTC_ASIA_HK_WWE_3.34.721.2 which sounds good. one more thing, my phone is not locked so do i need to do the 'SIM and CID-Unlock'
Click to expand...
Click to collapse
That's right, flash the HardSPL 3.29 first (SIM unlock is optional, CID unlock isn't needed - Hard SPL takes care of that - but it comes as part of the SIM unlock) then flash a WM6.1 ROM.
Ta
Dave
gazzacbr said:
not sure why HTC standard would not let me update, i thought the ruu would update any htc phone
Click to expand...
Click to collapse
Only if it's from the same region the RUU was intended for eg the European TyTN II's won't accept the latest Hong Kong WWE ROM by default because of this so as already suggested hardSPL works around this. My WM 6.0 UK original TyTN II upgraded to WM 6.1 OK but that was using the HTC UK provided ROM update. That updated everything required including the SPL and Radio to the required HTC versions. I'm back on the original WM 6.0 version though due to reliability issues with 6.1 and poor GPS performance.

Tmobile Compact iv Rom Upgrade

Hi folks, I have just got a T-Mobile Compact iv after handling a few HTC Touch Diamonds through my company and loving it in comparison with my old Vario 2 (HTC TyTN 1)
As I am on Contract with T-Mobile I have gone for the Compact iv version as it was free to me however Once receiving it I noticed the rom including the TouchFlow is a really really old version compared to what's on the Touch Dimaonds.
I have spoken to T-Mobile and they told me they can't supply a newer version but they have given me full permission to use the one on the HTC Website for the Touch Dimaond and if anything was to go wrong they will still support me.
I have a serial from one of the Diamonds we have here in the company in order to download the rom for my compact but I thought I would check here first as HTC refuse to give me any information as its a T-Mobile branded phone that the rom for the Touch Dimaond is perfectly fine for the UK Compact iv?
Thanks in advance for any information.
Regards,
Max
max_carpenter said:
Hi folks, I have just got a T-Mobile Compact iv after handling a few HTC Touch Diamonds through my company and loving it in comparison with my old Vario 2 (HTC TyTN 1)
As I am on Contract with T-Mobile I have gone for the Compact iv version as it was free to me however Once receiving it I noticed the rom including the TouchFlow is a really really old version compared to what's on the Touch Dimaonds.
I have spoken to T-Mobile and they told me they can't supply a newer version but they have given me full permission to use the one on the HTC Website for the Touch Dimaond and if anything was to go wrong they will still support me.
I have a serial from one of the Diamonds we have here in the company in order to download the rom for my compact but I thought I would check here first as HTC refuse to give me any information as its a T-Mobile branded phone that the rom for the Touch Dimaond is perfectly fine for the UK Compact iv?
Thanks in advance for any information.
Regards,
Max
Click to expand...
Click to collapse
A Touch Diamond ROM will work fine on a Compact IV. It´s a T-Mobile branded HTC Touch Diamond with a different cover. Hardware specs are all the same. So there's no reason why it wouldn't work. Just know what you're doing when flashing it. It could go wrong.
Thanks for the reply. I have flashed a few phones including HTC's and Nokias so I am not worried about flashing it, its part of my job being in IT I just wanted to ensure that the rom would work correctly encase there were any slight differences in hardware but I have got an HTC Branded Serial code so I will go ahead and download the rom upgrade
Thanks,
Max
max_carpenter said:
Thanks for the reply. I have flashed a few phones including HTC's and Nokias so I am not worried about flashing it, its part of my job being in IT I just wanted to ensure that the rom would work correctly encase there were any slight differences in hardware but I have got an HTC Branded Serial code so I will go ahead and download the rom upgrade
Thanks,
Max
Click to expand...
Click to collapse
Rom's could be found here to. They are all orignal roms.
See I would do that but as T-Mobile would normally no longer support you if you change roms and they have told me they will but as long as its downloaded from the HTC website I think I am going to be safe this time.
I wouldn't mind trying the 6.5 roms I am very intrested but I think I will wait until I have a spare phone
Regards,
HELP!! Won't run
:-( I tried to use the rom update but it says invalid Vendor ID then restarts my phone. It actually checking and finding I am running T-Mobile. Is there anyway around that?
Regards,
Max
Max, have a read of the wiki and you'll see there are a few things you need to do prior to flashing a new one. The most important one is installing HardSPL - this removes the invalid vendor id probs. Like I say, read the wiki and all will be clear.... if it isn't clear - don't risk it!
max_carpenter said:
:-( I tried to use the rom update but it says invalid Vendor ID then restarts my phone. It actually checking and finding I am running T-Mobile. Is there anyway around that?
Regards,
Max
Click to expand...
Click to collapse
Follow this tutorial and it should work. You could take a look here to.
Hi, I had just read all the instructions downloaded and installed the HardSPL from the second link you provided and Installed the orginal version (not the latest on that link as its what it said to try first)
I flashed it ok came back on but the screen is jurky and very slow when it finally finished coming back on it went straight to the customization screen which is normal for a flash but took forever (alot longer than I have seen before) once complete I then re-connected it back up and went to run the HTC Rom upgrade and still says invalid Vendor ID.
Am I undesrtanding this wrong and I need to copy certain files out of the HTC Upgrade and use them along side the files I downloaded with the HardSPL and use a mixture of files to get it working.
Regards.
Max
max_carpenter said:
Hi, I had just read all the instructions downloaded and installed the HardSPL from the second link you provided and Installed the orginal version (not the latest on that link as its what it said to try first)
I flashed it ok came back on but the screen is jurky and very slow when it finally finished coming back on it went straight to the customization screen which is normal for a flash but took forever (alot longer than I have seen before) once complete I then re-connected it back up and went to run the HTC Rom upgrade and still says invalid Vendor ID.
Am I undesrtanding this wrong and I need to copy certain files out of the HTC Upgrade and use them along side the files I downloaded with the HardSPL and use a mixture of files to get it working.
Regards.
Max
Click to expand...
Click to collapse
Did you successfuly flash the HardSPL into your device? You can check this by doing this:
To confirm is Hard-SPL is on your device, manually enter Bootloader by pressing the Volume Down and performing a soft reset at the same time. If successful you will see the tri-colour screen and the following will be displayed
Hard SPL 1.40.Olinex
DIAM100 MFG 64M
SPL-1.40.OliNex
I've checked what mine said, and this is what I've got back.
DIAM200 64M
SPL-1.93.OliNex
MicroP-Diam (LED) v11
So I guess you need a different HardSPL. Can someone confirm this for me? Checked my own MDA Compact IV map on my laptop and saw to files that I've used for flashing the HardSPL. Used Unsigned-Hard-SPL-Diamond-OliNex.zip and RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip. Needed to overwrite RUU_Signed.nbh in the map for Unsigned-Hard-SPL-Diamond-OliNex with the one out of the map from RUU_Signed_1_93OliNex_HSPL_UnsignedEdition. This worked for me then. Added the files for you. So maybe this works for you.
I get:
DIAM200 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
Have I done it with the wrong version now then?
I have tried using the files you have supplied and that worked as all the other flash things fail now so let me give it a go now that I have completed with your files.
Regards,
Max
max_carpenter said:
I get:
DIAM200 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
Have I done it with the wrong version now then?
I have tried using the files you have supplied and that worked as all the other flash things fail now so let me give it a go now that I have completed with your files.
Regards,
Max
Click to expand...
Click to collapse
I guess it had to work. Don't understand why it didn't. Because the HardSPL flash worked for you I don't understand why you stil had the invalid Vendor ID message. I hope my version will work for you.
Well after I did your flash and it finally came back on and finished the customization, the TouchFlo no longer appeared, just got a blank home screen and stayed like that. I have started the HTC Rom upgrade and it is actually flashing this time,
at 19% as I am writing this.
So I will post my results when it has finished.
Thanks,
Max
URGENT! Rom Update Failed!
Hi I need some urgent help.
The HTC Rom Update was running through gets all the way to 100% on screen and on mobile and then the phone restarts and the software says 'Update Error'
the phone then restarts to Bootloader and says:
DIAM200 64M
SPL-1.93.Olinex V11
MicrP-Diam (LED) V11
PSOC-VICT STAGE_PVT v0x20
Upgrade ROM Code error
Please Try Again
I have tried using a completly different computer and run the upgraded rom flash again and again it runs all the way through then fails at 100% again.
HELP!!! What do I do,,, I have no phone now :-(
Ok I have managed to flash it back to the posted by Crazyrooster, in this thread and its working again now the T-mobile branding has now gone and in Device Info it says:
Rom: 2.03.405.2 WWE
Date: 12/19/08
Radio: 1.09.25.23
Which is the latest version right? So how come the HTC Rom update failed but flashing the one contained earlyier on in this thread suddenly works and reports the latest vesion?
Regards,
Max
max_carpenter said:
Ok I have managed to flash it back to the posted by Crazyrooster, in this thread and its working again now the T-mobile branding has now gone and in Device Info it says:
Rom: 2.03.405.2 WWE
Date: 12/19/08
Radio: 1.09.25.23
Which is the latest version right? So how come the HTC Rom update failed but flashing the one contained earlyier on in this thread suddenly works and reports the latest vesion?
Regards,
Max
Click to expand...
Click to collapse
I really don't have a clue. So the phone is working now with a original HTC Touch Diamond ROM? Very strange that it gave problems. When I flashed a phone (MDA Touch) for the first time it worked for me. When I flashed my MDA Compact IV I didn't have any problems.
Right,
I didn't use the HTC Rom as the last flash it was the one listed a few posts back and it reports:
Rom: 2.03.405.2 WWE
Radio: 1.09.25.23
However I have the following problems and I am not sure they are related:
1: Sometimes on call its crackling
2: Loud speaker is awful and very distorted
3: Internet not working on all programs (just phoned t-mobile and requested internet settings to be resent see if that works)
4: My hang up button doesn't seem to be working once the screen has gone off.
5: Signal seems to be very week.
Any ideas anyone?
Regards,
Max
Ok I have just spoken to T-mobile and they reckon if I phone HTC they will supply me back with the T-mobile Rom.
But until then as they are shut I might experiment with further flashes to see if I can get it working better because I do want the latest software runs so much smoother but the problems I am currently having I can't live with.
Max.
Ok, hmm I have in theory 'downgraded' the rom now on version
1.93.405.1 WWE downloaded directly from the HTC website radio version 1.00.25.05 and I still have the same problems:
crackling or fuzzing on calls,
the loudspeaker is a bit better quality but still a bit distorted (even at lowest volume)
internet works but for some reason, activesync wont work with our exchange server, msn mess doesnt work, you tube app.
still feels quite warm but thats prob all the flashing I am doing.
The latest HTC rom from their website still gets to 100% then fails and leaves no os on my phone just the bootloader.
One problem fixed the hang up key now works fine.
So I guess its just experimenting with the radio now and get a better signal.

Error during ROM Update

Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Charlles said:
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Click to expand...
Click to collapse
Reflash your original carrier rom. from the tri-color screen.
Since WM 6.5 has not and will not be released for the Kaiser, I am assuming that you are trying to flash a custom 6.5 rom, and have followed all the steps described here:
http://forum.xda-developers.com/showthread.php?t=433835
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Charlles said:
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Click to expand...
Click to collapse
Did you follow all the steps in the link I gave you above before you tried to flash the Hyperdragon rom ?
What I mean is to find the original rom that came with your phone, in the Kaiser Wiki and reflash that on to your phone.
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Charlles said:
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Click to expand...
Click to collapse
Where and when did you get your phone and who is the carrier ?
I from Brazil, the carrier is CLARO, i buy of a friend in this month, i have no idea when he buy.
In the box of the phone, is write: "Windows Mobile 6 Professional"
have another way to fix this?
What is the built of your tytn II i.e. its HTC TYTN II or AT&T Tilt ???
if its of HTC then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of HTC available on kaiser wiki page and vice versa for AT&T Tilt.
Hope it'll sort out ur problem.
Cheers
kashifmehmood said:
what is the built of your tytn ii i.e. Its htc tytn ii or at&t tilt ???
If its of htc then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of htc available on kaiser wiki page and vice versa for at&t tilt.
Hope it'll sort out ur problem.
Cheers
Click to expand...
Click to collapse
htc tytn ii
A try a lot, and usualy the errors bellow happen:
ERROR [294] : INVALID VENDER ID
ERROR [262] : UPDATE ERROR
If help, what show in the screen is:
RUUNBH
KAIS120
SPL-1.94.0000
CPLD-8
USB
You need other information?
Thanks
Fellas,
I read in another topics, and i think this error happen because i don't have the HardSPL installed on my HTC TyTN II.
Now the question, how i can install HardSPL with my phone frozen on the tri color screen?
How can i know if HardSPL is install on my phone?
Thanks.

Categories

Resources