Kaiser Call History - Tilt, TyTN II, MDA Vario III General

I know this topic has been posted before however I cannot believe that all of the developers, cooks and fanatics in this forum are unable to provide a fix to this query which I would be more than happy to donate for.
The call history on my Kaiser is by default limited to storing the last 2 weeks which is not satisfactory whatsoever which is why I would like a fix so the Kaiser does not have a time limit on the call history. I would like all my calls to remain on my Kaiser untill such time as I delete them manually.
All I want to now is whether this is possible or is there a 3rd party program which can do this? Thanking you in advance. Richard

rwcozens said:
I know this topic has been posted before however I cannot believe that all of the developers, cooks and fanatics in this forum are unable to provide a fix to this query which I would be more than happy to donate for.
The call history on my Kaiser is by default limited to storing the last 2 weeks which is not satisfactory whatsoever which is why I would like a fix so the Kaiser does not have a time limit on the call history. I would like all my calls to remain on my Kaiser untill such time as I delete them manually.
All I want to now is whether this is possible or is there a 3rd party program which can do this? Thanking you in advance. Richard
Click to expand...
Click to collapse
Hi dude
I don't know the right registry tweak to fix it (maybe someother know it!) but you can try the SKTolls app, but it isn't free, more info about it here!
From the main menu -> Tune Up! -> Phone Edition Tab -> set it in the "Call history legth" option!!
Ciao

...again here
just now i found this registry key! Use any Regeditor and go here:
"HCU\ControlPannel\Phone" and edit the key "CallHistoryMax" but i don't well remember if the "0" value is for unlimited number or really 0, no history. However try first to set "0" , soft-reset and test it! If you haven't call history the "0" is that, so edit it again to a number you prefer (the limit is about 65500, anyway i think it's enough for you!)!

ok, wish granted, please send your donation to the creator of KaiserTweak.

the_passenger said:
ok, wish granted, please send your donation to the creator of KaiserTweak.
Click to expand...
Click to collapse
Haha! If only the OP had used the "search" feature to begin with! LOL!

Would gladly donate and fortunately not stupid enough not to search.
I have both kaiser tweak where I have set call log to "Never" and have SK Tools where I have set call history length to maximum.
Could these 2 programs be conflicting each other?

rwcozens said:
Would gladly donate and fortunately not stupid enough not to search.
I have both kaiser tweak where I have set call log to "Never" and have SK Tools where I have set call history length to maximum.
Could these 2 programs be conflicting each other?
Click to expand...
Click to collapse
I've both these two apps installed, but, in my device, i didn't realize any conflict!

@[email protected] said:
I've both these two apps installed, but, in my device, i didn't realize any conflict!
Click to expand...
Click to collapse
Thanks for the reply. How long does your call history stay on your kaiser for just to establish whether your tweaks etc are working?

rwcozens said:
Thanks for the reply. How long does your call history stay on your kaiser for just to establish whether your tweaks etc are working?
Click to expand...
Click to collapse
...mmmh,i cannot answer you, or better, it's not useful for your purpose, because i've setted the number limit to 200 and the time limit to 1 month (it's enough for me), however i can only say that untill i don't manually delete the call history, it's always stored on my device without problem!!!
Ciao

Related

Keep dialpad on while on a call?

I have to make a lot of calls to conference #'s and such, and I consistently find myself panicking when I have to enter a pin or entry code, because the back light has gone off (screen blank), and when I do figure out the right key to press to bring it up, the keypad is no longer there. I have to press the "show keypad" button. Usually by the time I figure that all out, if I haven't already inadvertently hung up the call, I've timed out for the response.
Anyway, making a short story long.... Is there anyway, while on a call, to keep the dialpad and backlight on?
kaiser tools. search. read
kireol said:
kaiser tools. search. read
Click to expand...
Click to collapse
I suspect you meant "Kaisertweak", not "kaiser tools". Thank you. I was able to weed out the reg hack to keep the backlight on longer. It wasn't clear that this also addresses keeping the keypad up.
mooshwa said:
I suspect you meant "Kaisertweak", not "kaiser tools". Thank you. I was able to weed out the reg hack to keep the backlight on longer. It wasn't clear that this also addresses keeping the keypad up.
Click to expand...
Click to collapse
one klick to the dial wheel will do also show the the dialpad.
mooshwa said:
I suspect you meant "Kaisertweak", not "kaiser tools". Thank you. I was able to weed out the reg hack to keep the backlight on longer. It wasn't clear that this also addresses keeping the keypad up.
Click to expand...
Click to collapse
And the final answer is... how do you do this. (Infallable ones: please spare us the read, search mantras...)
Bump
Bump. Anyone? Thanks in advance. This small change would really be a great useability enhancement for normal phone use.
KaiserTweak
Download KaiserTweak and disable Fast Sleep. There are a lot of tweaks included that make the Kaiser/Tilt better.
http://forum.xda-developers.com/showthread.php?t=333898
Name?
madmatt079 said:
Download KaiserTweak and disable Fast Sleep. There are a lot of tweaks included that make the Kaiser/Tilt better.
http://forum.xda-developers.com/showthread.php?t=333898
Click to expand...
Click to collapse
Is it just a very strange description for this reg tweak? "Fast Sleep" sounds totally different than "Disable Automatic Call Status Switching". Is this a 2 for 1 change? Can someone simply post the exact registry change, that is easier for me?
Bump (again)
Wow, lots of comment, incorrect and corrected comments. Potentially cryptic solutions. Anyone with a simple registry change. Sure would be much appreciated.
swamp2 said:
Wow, lots of comment, incorrect and corrected comments. Potentially cryptic solutions. Anyone with a simple registry change. Sure would be much appreciated.
Click to expand...
Click to collapse
Just download the F-ing application and make the change. It automatically changes the registry entry so you don't have to worry about it. Your question was answered, there's no need to bump this thread because it wasn't answered in the way you wanted it to be.
Thanks
Bellfazar said:
Just download the F-ing application and make the change. It automatically changes the registry entry so you don't have to worry about it. Your question was answered, there's no need to bump this thread because it wasn't answered in the way you wanted it to be.
Click to expand...
Click to collapse
Thanks man, really friendly and mature comment. Is there really a need to start with the "F-ing" language. Grow up, requesting a registry edit is really acceptable from my experience on this board. I simply prefer to manage all of my registry changes manually.
swamp2 said:
Thanks man, really friendly and mature comment. Is there really a need to start with the "F-ing" language. Grow up, requesting a registry edit is really acceptable from my experience on this board. I simply prefer to manage all of my registry changes manually.
Click to expand...
Click to collapse
Just to give you a heads up this program "KaiserTweak" works really well. I have used it myself now on 3 different ROMS and have had no issues. I highly recommend it.
You are all WRONG
kierol, Hejdemann, madmatt079, and Bellfazar.
You guys are ALL WRONG! OK some of you are only 50% wrong.
A particularly big "screw you" back to Bellfazar for the unjustified "know it all" and rude attitude. See below from PM-ing with KaiserTweak author Chainfire.
The point is that there are two separate issues, clearly delineated by mooshwa in reply #3.
From swamp2 to Chainfire:
Sorry to bother you with a PM. I really dig your program and all the great reg edits you have put together. I prefer to manage my reg mods manually. Folks keep telling me that there is a reg edit in your program that disables the automatic switching, after placing a call, from the keypad to the call status window of the dialer. I would simply like to disable this automatic switching and not change anything else. I would greatly appreciate you sharing this reg edit with me. By the way in case it is relevant I have the AT&T branded device with the AT&T dialer as well. Thanks in advance.
Click to expand...
Click to collapse
Reply from Chainfire to swamp2:
AFAIK there is no Tweak in KaiserTweak that does this, though it may be some side-effect of another tweak. If you are interesting in the tweaks themselves, read the XML document format description on the KaiserTweak page and just download KaiserTweak and review the XML file. All tweaks are in there.
Click to expand...
Click to collapse
Lastly just to be 100% clear I am using the disable fast sleep tweak and that works great but it IS NOT a side effect of this tweak to accomplish what I was posting about, disable automatic call status switching.

Are there any Standalone Answerphone Software's

Hi all,
due to the fact my provider has now started charging me for accessing voicemails and will not include voicemail access in my inclusive minutes I have turned off the voicemail answerphone on my t-Mobile MDA Vario III (Kaiser), what i'm looking for is a programto run on the PDA that will answer a call after say 45 seconds of ringing and act like an answerphone and record any messages direct to the PDA. I have searched for answerphone but without luck and the only program I can find via Google is iSecretary, but that aparantly isn't fully compatable with the Kaiser?. Has anybody got any ideas as to anything else available that will do this job, preferably free but if I have to pay for the ideal solution so be it.
Thanks
MI5
Sorry, did not read full post.
vip3r69 said:
Sorry, did not read full post.
Click to expand...
Click to collapse
Very helpful, indeed...
htc_mi5 said:
Hi all,
due to the fact my provider has now started charging me for accessing voicemails and will not include voicemail access in my inclusive minutes I have turned off the voicemail answerphone on my t-Mobile MDA Vario III (Kaiser), what i'm looking for is a programto run on the PDA that will answer a call after say 45 seconds of ringing and act like an answerphone and record any messages direct to the PDA. I have searched for answerphone but without luck and the only program I can find via Google is iSecretary, but that aparantly isn't fully compatable with the Kaiser?. Has anybody got any ideas as to anything else available that will do this job, preferably free but if I have to pay for the ideal solution so be it.
Thanks
MI5
Click to expand...
Click to collapse
I'm afraid there is no solution, because of the limitations of the Kaiser (and many HTC devices) with the incoming sound.... (mic only)
A workaround should be available in iSecretary, recording loudspeaker -> mic, but this application crashed a lot on my Kaiser so removed it...
Also because it is not a nice solution anyway...everybody can 'enjoy' the voice message.
Zoolooc said:
Very helpful, indeed...
Click to expand...
Click to collapse
Sarcasm does not suit your hair style, I did say sorry.
vip3r69 said:
Sarcasm does not suit your hair style, I did say sorry.
Click to expand...
Click to collapse
OK, I hurried myself to answer, it was still the leftover text making me think that the answer wasn't helpful, as seeing the thread's subject first made me hope to actually find something helpful (wondering why there isn't such an application anyway). Sorry.
Zoolooc said:
(wondering why there isn't such an application anyway). Sorry.
Click to expand...
Click to collapse
because of the limitations of the Kaiser (and many HTC devices) with the incoming sound.... (mic only)
Optimistisch_nl said:
I'm afraid there is no solution, because of the limitations of the Kaiser (and many HTC devices) with the incoming sound.... (mic only)
A workaround should be available in iSecretary, recording loudspeaker -> mic, but this application crashed a lot on my Kaiser so removed it...
Also because it is not a nice solution anyway...everybody can 'enjoy' the voice message.
Click to expand...
Click to collapse
According to iSecretary the TYTNII is only "half supported" but it looks it would do everything you want.
- lifts the handset automatically when the preset time expires;
- plays the file to the caller;
- records your caller's message within the limits of preset time and hangs up;
Click to expand...
Click to collapse
(http://www.isecretary.net/about.php)
check your voicemail using a landline...
I guess i'll have to try isecretary and see if it does enough to get me going, unfortunatly checking voicemail via a landline is not an option in my situation.
Thanks for all the replies so far.
MI5
htc_mi5 said:
I guess i'll have to try isecretary and see if it does enough to get me going, unfortunatly checking voicemail via a landline is not an option in my situation.
Thanks for all the replies so far.
MI5
Click to expand...
Click to collapse
just be prepared.... you will be disappointed...
I did try iSecretary and it worked on some of the calls, about 2 out of the 10 I made to my phone. And like "Optimistisch_nl" said: the callers voice is on loudspeaker while leaving the message. Also the message that I recorded to tell people to leave a message doesn't play either for the caller.
Sorry dude, I'm also still looking for something like this and will let you know if I find a solution.
# Zoolooc # Apology accepted and I also apologize for my remark.
vip3r69 said:
I'm also still looking for something like this and will let you know if I find a solution.
Click to expand...
Click to collapse
You won't find a solution unless you buy e.g. a Nokia.....
Guys, ALWAYS check out the Wiki first. I've answered this very question at http://wiki.xda-developers.com/inde...nswering machine for Windows Mobile released!
(also see the group http://wiki.xda-developers.com/index.php?pagename=Audio and call recording, answering machines )
In a word: no, don't expect much - WinMo is, by default, pretty much useless when it comes to local (!!) nswering machines. Should you really need them, go for Symbian.
Optimistisch_nl said:
You won't find a solution unless you buy e.g. a Nokia.....
Click to expand...
Click to collapse
Yup, it works wonderfully on my Nokias...
Optimistisch_nl said:
You won't find a solution unless you buy e.g. a Nokia.....
Click to expand...
Click to collapse
I was also told that file sharing on WM is not possible by "CLEVER" people, but hypest told me that by setting up a ftp server on the ppc you could share folders that would be visible and able to be browsed by another ppc. Now if that is not "file sharing" then lets call it "sharing files". It works just the same as normal file sharing on Windows.
( http://forum.xda-developers.com/showthread.php?t=374249 )
Where there is a will there is a way.
vip3r69 said:
I was also told that file sharing on WM is not possible by "CLEVER" people
Click to expand...
Click to collapse
You should have asked me I've even reviewed & thoroughly compared FTP clients (along with mentioning FTP servers) for Windows Mobile - search for example for 'vxFtp' in the Wiki.

Menu ' Phone / Filter Calls ' does not retain settings

Hi, everybody
after upgrading to WM 6.1, i noticed that Filter Calls always displays just the missed calls, that is I have ti tell him each time that I want to see All Calls, however next time I open Call / Filters, again I can see only missed calls.
what should be the problem?
thank you.
loveumaryii said:
Wise man have their mouths in their hearts, fools have their hearts in their mouths.-------------------------Our website offer Fast and Secure wow powerleveling service. 60-70, Cheap 1-70. The Professional ! Powerlevel wow gold now. WOrld of warcraft Power Leveling bloom of true love associated with this time of year!
Click to expand...
Click to collapse
You're going down spammer!!!
Smart thing to quote his entire post including his links
Same problem. Does any one know how to solve it
Me too, check the registry did not find the correct registry key to toggle to all calls. Anyone can help?
Same annoying bug here too..
Just browsed through the registry, but I couldn't seem to locate the proper key(s).

Anyway to change the voice that reads sms outloud?

You know the lady voice that announces when the battery is almost dead, when you get a text message and reads it to you and all the other stuff...is there any way to change that text to speech voice to a different female voice? I know there are several other voices that are available but not sure how it would be changed on wm 6.1
First off, what app is doing that for you?
huh???!!
angelo2k8 said:
You know the lady voice that announces when the battery is almost dead, when you get a text message and reads it to you and all the other stuff...is there any way to change that text to speech voice to a different female voice? I know there are several other voices that are available but not sure how it would be changed on wm 6.1
Click to expand...
Click to collapse
Are you sure your using a diamond for that? I have used a diamond for months now and have not discovered that feature!! please provide further details as to what device you have and which country bought in etc.
interesting....
I think I know what he's talking about, which is he has MS Voice Command installed.
As far as I know, it isn't possible to change the voices on MSVC but if anyone can prove me wrong please do, as I'd love a different set of voices as well
xavierdemon said:
First off, what app is doing that for you?
Click to expand...
Click to collapse
He's talking about Voice Commander. When you receive an email / sms you can run it and say 'Read SMS' or 'Read Email' and it will read any unread emails /sms
Very handy, esp. when driving
I would also love to know how to change the voice though
xavierdemon said:
First off, what app is doing that for you?
Click to expand...
Click to collapse
Voice Command located in settings menu.
RAF_SHC said:
Are you sure your using a diamond for that? I have used a diamond for months now and have not discovered that feature!! please provide further details as to what device you have and which country bought in etc.
interesting....
Click to expand...
Click to collapse
Come on now, of course I know what freakin' phone I'm using. That's like asking someone if they know what kind of car they drive and if they are sure about it.
Here's what you do to enable it:
Settings>Voice Command>
Check 'Enabled'
Check 'Messaging', 'Status' & 'Phone' boxes
The go to 'Notifications' and check 'Announce notifications through device speaker or wired headset only'
[/LIST]
Those directions above will read out loud the person calling you when you get a call, the person who sent you a SMS and what the SMS says, will read to you any email including the sender and subject line, but not the email and will also notify you when your battery is gonna die.
Trust me, it's a major attention-getter when your phone reads a text message to you when it comes in and people around you are like wtf was that. Plus it's great if you are lying in bed or something and your phone is across the room...you can hear what the message says and whether or not it's worth getting out of bed for. :-D
But anyway, if anyone knows how to change the voice please respond. Thanks!
Voice Command isn't installed on all Diamonds as standard and as I stated, there is no way to change the voices, I have searched for this myself before with no luck.
cool!
xavierdemon said:
Voice Command isn't installed on all Diamonds as standard and as I stated, there is no way to change the voices, I have searched for this myself before with no luck.
Click to expand...
Click to collapse
This sounds like an excellent app! I tried locating it on my UK O2 spec diamond and could not find so if anyone has got a cab file please post. I will search google now and i'm sure i'll find it and post if no-one beats me to it.
Man i'm learning new sh!t about my phone everyday. Cheers guys i know i have not answered your question but you have helped me finding something new
nice one!
pretty sure you cant change the voice but i know there's a registry tweak to slow the voice down witch makes it easier to understand. I've just remembered I'm sure there's the tweak in Advance config hope this helps
yeah i have this enabled on my phone and its the best when your laying in bed and wonder if its worth looking at. I do wish it was a more sexier voice like sigourney weaver from planet earth, and a little slower would be nice. IT came stock on my sprint diamond fyi, im surprised other versions dont have it
I have a sprint diamond and mines only talks when someone sends me a text message marked urgent and thats it. I have all the tabs checked on VC in the settings menu. am I missing somthing?
ajbrickyard said:
I have a sprint diamond and mines only talks when someone sends me a text message marked urgent and thats it. I have all the tabs checked on VC in the settings menu. am I missing somthing?
Click to expand...
Click to collapse
me too
and I can`t say anything to phone too!
I guess I'm missing it too because mine doesn't say anything.
ajbrickyard said:
I have a sprint diamond and mines only talks when someone sends me a text message marked urgent and thats it. I have all the tabs checked on VC in the settings menu. am I missing somthing?
Click to expand...
Click to collapse
You don't have it setup correctly, that's why.
Go into Voice Command and do this:
- Check all the boxes you want to use this service. (Phone, Messaging, Status, Etc.)
- Highlight 'Messaging' then click on 'Options' button then UNCHECK 'High Priority Messages Only' and CHECK 'Announce New Messages'. Do the same steps for others like 'Phone' and 'Status' to change it's options. Make sure you highlight it first.
berserker said:
I guess I'm missing it too because mine doesn't say anything.
Click to expand...
Click to collapse
Read my replies in this thread.
Don't have it neither on a 1.93 HTC ROM official
Seem to be cool to try... is it available ?
Ciao
Fred

Thirteen "not obvious" questions about using X1i

Good afternoon!
I've tried to ask these question on other forums, but almost nobody gave me an answer. There were some about different software to use, but it didn't really help. So I would be very pleased if you, dear X1 gurus, answer these question. Please, if you know the answer - write it here for me and other people. Thank you very much in advance!
The priority is: I. How to solve the problem using native software or registry? II. If and only if the first is not possible, how to solve it using different software?
1. Where in file system the vocabulary of words which were inputted before is situated? It's a vocabulary with these tooltips-words while typing. Can I get it somewhere form my phone and backup or even edit?
2. How can I check my X1 uptime?
A: As yet I know only one way: use AEButton Plus. You can correct or supplement this opinion(and please do it) if you know more on that.
3. Someone called me from number +ХХХ, I want to call him back, BUT to add a zero between + and the first digit(+0XXX). How can I do it? I can't copy this number and there is no options like "change then dial". The one and only solution for it - is to choose "send SMS" and copy the number from the "From" field! But is it useful and normal for a device which costs about 500 euro?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
4. Imagine: you have a contact Ivan in your contacts, which has 2 phone numbers: mobile and work. Two sms arrive to your phone: one is from his home number, another is from work. Sms inbox displays both of it as "Ivan". How do I know which sms is sent from what number?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
5. How can I copy a number which was dialed earlier or number from contacts? I see only one way(but it's weird): chose "edit contact" and copy from the field. Is there another way?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
6. While a phone conversation how can I easily save a number which my friend is saying to me? I tried to dial it while a call is active, it's ok, but once the call is dropped, my number disappears! Yes, I can create a note using a special touch-key, but it's not useful, because I should use my keypad and then should copy that number, but I need to dial it! How can it be solved?
7. Have anybody experienced a problem while taking a photo of many different objects? I had. It happened when I took a photo of a forest - there were a lot of trees alongside each other and after pressing shot button, "Saving..." was displayed on my screen for about 15 minutes! After it said that it failed to take a photo. What it can be?
8. Where can I find all my earlier connected WiFi points and passwords? I want to save it before upgrading my firmware. Can I backup it?
9. Can I turn of a feature of turning my screen light on when I plugging my X1 to PC? I don't want this light to be turning on when I do it! Is it possible?
10. While surfing internet via GPRS/EDGE or getting my email from server, my GSM part of device seems to be "unconsciousness": when somebody calls me, I'm "out of zone". How can I fix it? I want my GSM part to be number 1 by priority!
11. I can see anything when the sun is shining. I know everybody with X1 can't. But can I "ask" my backlight to help me? For example, set it to turn maximum power when on the light, or something? I'm asking because, as I've understood, my auto-backlight works vice versa: when it's bright - it turns off, when it's dark - it turns its max power. I want max power when it's very bright too!
A: People say that screen protector with anti-glare really helps.
12. When an SMS is coming, I get a popup notification at the bottom of the screen. I can either press "Reply" or "Options". If I press reply, the chat mode opens and I can reply, seeing all our conversation. BUT if I go to my address book and choose "New SMS" on a contact, different form will be opened, just like for e-mail composing. And here is a question: how can I make this "e-mail composing" style sms appearing after I press "Reply" when new sms arrived? I know how to turn the chat mode off, but I don't need it to be turned off completely, because it's useful while reading sms from one person. I just want reply to a person using simple form. Is it possible somehow? I think that if it's can be made by hands(New sms from contacts), then it could be implemented programmatically... maybe some values in registry?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
13. At the screens you can see screenshots from my X1 with R2A0010 and 1.14 radio: 1 hour after powering on and 2 days after powering on. Why there is such a difference in memory consumption in some system processes? Is it an ordinary thing?
A: People say that it's normal. You can correct or supplement this opinion(and please do it) if you know more on that.
Thank you very much in advance again!
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
#5, go to call log in the phone dialer and there is a menu option to save to contacts. If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
PhoneX can do these two.
WhyBe said:
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
Click to expand...
Click to collapse
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
WhyBe said:
#5, go to call log in the phone dialer and there is a menu option to save to contacts.
Click to expand...
Click to collapse
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
WhyBe said:
If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
Click to expand...
Click to collapse
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
VNMenIeu said:
PhoneX can do these two.
Click to expand...
Click to collapse
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
BRING ON THE QUESTIONS!!!!!!!!!
1 - I don't know.
2 - AEB Button Plus has such a feature.
3, 4, 5, 6, 12 - I use PhoneEx sorry.
7 - Never heard of it. Upgrade your device to R3A and try again.
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
10 - Never had that problem. Are you using a custom ROM?
11 - I can see the screen very good in the sun, because I use a screen protector with anti-glare. Buy one and be amazed.
13 - It is normal.
J-Pro said:
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
Click to expand...
Click to collapse
PhoneEX is way more useful than org. dialer
orelsi said:
BRING ON THE QUESTIONS!!!!!!!!!
...
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
I've been using the PhoneEx trial for a few days and it doesn't do #5 and #6. If any workaround involves tons of keypresses and program changing (during the call) to accomplish, then it fails. I think the OP is looking for a quick way of accomplishing these things during a call. Going to the notes application during a call only partly works. In order to actually use that number you may have jotted down in notes, you have to find the file and call the number from the notes file...not very elegant. There should be a means of jotting down numbers while in the dialer (without sending out tones causing your voicemail to go crazy) so that you may call or save them during or afterwards.
Also, I may be wrong but, how do you add additional numbers to a contact without copying and then going into edit contact then pasting? For example, how do you add a home number to a contact that already has a work number without manually going into edit contact and adding it. There should be a "merge with existing contact" feature within the dialer menus.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
WhyBe said:
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
Click to expand...
Click to collapse
That is your right, but not my problem.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
spikegotti said:
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
Click to expand...
Click to collapse
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
same...i think it's the most useful app in my fone.
WhyBe said:
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
Click to expand...
Click to collapse
Sorry, I can't understand what you want .
J-Pro or others,
what is the task manager in screenshots in first post?
It's not a biult-in one??
orelsi said:
1 - I don't know.
Click to expand...
Click to collapse
Thank you, it really helped me!
orelsi said:
2 - AEB Button Plus has such a feature.
Click to expand...
Click to collapse
Didn't know, thank you.
orelsi said:
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
orelsi said:
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
Click to expand...
Click to collapse
If somebody has it, please, post it here...
orelsi said:
10 - Never had that problem. Are you using a custom ROM?
Click to expand...
Click to collapse
No, my rom is R2A0010 UK WWE.
doministry said:
what is the task manager in screenshots in first post? It's not a biult-in one??
Click to expand...
Click to collapse
It's FdcSoft Task Manager
J-Pro said:
Thank you, it really helped me!
Didn't know, thank you.
Click to expand...
Click to collapse
You are welcome!
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
Click to expand...
Click to collapse
Sorry as in "I use superior product ftw" .
Unfortunatelly the nature of WinMo is that you need to add third party soft most of the time. That's the way it works.
orelsi said:
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
Click to expand...
Click to collapse
Checked all txt(and other) files in windows folder. There are nothing about wifi settings...
J-Pro said:
It's FdcSoft Task Manager
Click to expand...
Click to collapse
Thank you for help!
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
VNMenIeu said:
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
Click to expand...
Click to collapse
Just for fun My work computer can be running for month or so... Sometimes it's interesting for how much your X1 is powered on. For example, if I see any bugs on it, I question myself: "How long does this thing work? Maybe it's time for an SR?". If I found that it's only a day - I would be very curious. And if it's already a week - I do an SR without any additional thoughts That's my answer

Categories

Resources