Hello. I have problem with my Kaiser. I want to remove some stuff from setting (task manager, comm manager etc.) but always when i remove keys in registry they back on next soft reset. I make soft resets by psShutXP. How i can remove stuff from settings? Anybody can help me? I have original ROM from HTC. Thanks for any reply.
Sorry for my english.
Best regards.
Why don't you try a softreset without the tool but just via the normal way.
In situation when i try to make soft reset in normal way (by stylus) keys back too...
Related
Hi,
One of the things i really find annoying about my phone setup is the fact that I keep on knocking the camera button and activating the camera by mistake. I don't use the camera that often (no guesses why) so I would prefer to assign the button to ALT-TAB or something that I would find a little more useful.
I have made the change in settings but it seems that my new button assignment only works until I perofrm a soft reset. Then the button reverts back to starting camera.
Is there any way of doing this so even after a soft reset my button assignments don't change?
Thanks in advance,
Charles
Go to Device\windows\Startup and delete cameradetect. Everytime you reset now the things you assign will keep.
Thanks Pug. You're the man!
I wondered the same thing, thanks Pug
Thanks Pug - same here
how to disable from rom?
Hi all
I sort of have the same problem with the camera. don't use it either. I would like to disable it from within the rom but i can't seem to find it.
The problem is that if you get a hard reset the detect camera is there again in the startup
anyone any suggestions? is it baked in the os rom?
thnx in advanced :lol:
It is Possible to remove the file using a script during a hard reset. All this does is delete the cameradetect shortcut, you still need to re-assign the button. This can only be done by cooking the ROM though. I will post the script as soon as I can.
It is Possible to remove the file using a script during a hard reset. All this does is delete the cameradetect shortcut, you still need to re-assign the button. This can only be done by cooking the ROM though. I will post the script as soon as I can.
Thnx PUG !!!!
Hey PUG
thnx for the info. Can't wait for the script (no hurry of course). I didn't know you could do scripting with a pda but of course it is a form of windows :roll: .
Well thnx again and a Merry X-Mas to ya :lol:
Greetz,
Mark
Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again
Hi all
I have a need to apply a registry change to a Qtek 9100.
However, if i preform a soft reset and check the registry the key i have changed has been reset to the default value.
Being a total newbie does anyone know if this is supposed to happen?
If not is there a way i can force the registry change to stay?
Many thanks in advance
Registry key changes do not get saved immediately. Hence a soft reset too soon will lost your changes. The safest way to do so is do a shutdown by hold the power button and tap YES button when prompted.
Just wait a little, like 5 minutes, or do a reg backup. Then it will stay.
Hard Reset?
Hi all
Thanks for the prompt response
I will try this tomorrow in work
Dear All,
Anyone have same problem after change registry key and wait a few mins, but after soft reset a setting can't be save and back to the original key.
Thanks!
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
xplode said:
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
Click to expand...
Click to collapse
Tried same as, use "Resco Registry". Thanks!
xplode said:
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
Click to expand...
Click to collapse
Dear xplode,
I tried more than 10 times still can't memory registry changed. Do you know is any program installed will cause this problem.
Thanks a lot.
You have very strange issue, i do my registry editings with Resco mostly
have you thought about that some software may change the registry entryes or keys on bootup to the way they like, and even if you change them on reboot the entryes are lost
try to change reg's to a clean rom, it is software issue but i am not sure which software makes this
athena99 said:
Anyone have same problem after change registry key and wait a few mins, but after soft reset a setting can't be save and back to the original key.Thanks!
Click to expand...
Click to collapse
Just curious, which registry keys?
There's also a possibility that programs "auto-loading" during startup might be causing the problem.
I've been using the freeware reg editors from PHM & .Fred's Task Manager & both works in "all" of the AKU 3.5 ROMS here.
You may try to install the test cab attached which changes the label of your left & right softkeys to Test1 & Test2 respectively. Changes are effective immediately, soft reset & see if it gets retained.
xplode said:
You have very strange issue, i do my registry editings with Resco mostly
have you thought about that some software may change the registry entryes or keys on bootup to the way they like, and even if you change them on reboot the entryes are lost
try to change reg's to a clean rom, it is software issue but i am not sure which software makes this
Click to expand...
Click to collapse
Thanks xplode, I waiting for you latest 3.5 rom and test it.
Hi Guys,
i have just installed this CAB: BJK_HTC_EzInput2_WVGA_NoKbd_0409-B1_4.cab
But i would just prefere the "old" Touch HD Keyboard/Keyad etc.
How can i get them back? Because as far as i have seen BJK_HTC_EzInput2_WVGA_NoKbd_0409-B1_4.cab replaces them :-(
Is there any CAB out there (already searched but found nothing) or can anyone send me the files for the old Keyboards (Keypad, conpact Qwertz, complete Qwertz)
Thanks a lot,
BigD
Does uninstall and soft reset not bring the old keyboard back?
Post #3 HTC Keyboard (old) http://forum.xda-developers.com/showthread.php?t=482258
no it didn´t, now i did a hard-reset, was necessary anyway
i have the same problem i want my origional keyboard back how do u hard reset and what will this do?
ollieholt said:
i have the same problem i want my origional keyboard back how do u hard reset and what will this do?
Click to expand...
Click to collapse
Hard reset will restore device to factory settings. i.e. it will be as if you just flashed a rom, everything will have been lost/reset i.e. all software, apps, contacts, emails, everything on device will have been lost except what was on SD card. You will need to set up your device again.
To perform a hard reset:
Turn off device
Hold down volume up & volume down and press power on
Continue to hold volume up & volume down until you are presented with white screen and text.
Follow text intructions and press vol up to reset to factory settings
EDIT
Are you just trying to set original keyboard as default after you uninstalled a keyboard?
If so try going to Start > Settings > Personal > Input and select keyboard
Alternatively install SIP Change and then open it and select keyboard to be used as default
thankyou very much!
so if i copy all my devices contacts etc over to the card with the cabs etc. and reload them onto the phone after the hard reset there will be minimal change i.e. i dont have to fish around for all my contacts again lol.
thanks again in advance
edit: the only reason i want the old one back is that finger keyboard 2.1 has messed it all up. im running windows 6.1 the standard rom. no keyboard will open when browsing web and the keyboard doesnt even open all the time on messages.
again many thanks
sorry again i am a noob...
how do i copy contacts to my card memory, there isnt enough space on the sim card for even half of them and i cant find them in file explorer is there something im missing? its probably an onvious one aswell.
sorry.
cheers
i have installed the sip change now, the keyboard that comes up when selecting keyboard is a dodgy little buttoned non standard one for some reason i think im guna have to reset the device hopefully this will get me the hd touches keyboard back... again sorry just need to know how to get my contact safe before resetting
thanks
ollieholt said:
i have installed the sip change now, the keyboard that comes up when selecting keyboard is a dodgy little buttoned non standard one for some reason i think im guna have to reset the device hopefully this will get me the hd touches keyboard back... again sorry just need to know how to get my contact safe before resetting
thanks
Click to expand...
Click to collapse
When in email, sms etc and keyboard pops up, have you tried selecting up arrow beside the wee keyboard symbol at bottom and selecting different keyboard?
To backup contacts you have a few options. You can either sync contacts with your pc Outlook or use free backup apps like PIM Backup & Sashimi or 3rd party apps like SPB Backup, Sprite Backup & Resco Backup
yes ive tried the switcing input method onto "keyboard" infact ive tried them all to no avail still either this dodgy little crappy keyboard or one of the other input devices, im going to hard reset i think its best. thanks very much ill use the active sinc for it.
you have been a great help tyvm
update a hard reset has sorted this problem i will do more research before installing keyboards in the future many thanks