Registry changes not staying applied on Vodaphne Qtek 9100 - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi all
I have a need to apply a registry change to a Qtek 9100.
However, if i preform a soft reset and check the registry the key i have changed has been reset to the default value.
Being a total newbie does anyone know if this is supposed to happen?
If not is there a way i can force the registry change to stay?
Many thanks in advance

Registry key changes do not get saved immediately. Hence a soft reset too soon will lost your changes. The safest way to do so is do a shutdown by hold the power button and tap YES button when prompted.

Just wait a little, like 5 minutes, or do a reg backup. Then it will stay.

Hard Reset?
Hi all
Thanks for the prompt response
I will try this tomorrow in work

Related

Button lock always returns after soft reset

Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again

Registry problem

Dear All,
Anyone have same problem after change registry key and wait a few mins, but after soft reset a setting can't be save and back to the original key.
Thanks!
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
xplode said:
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
Click to expand...
Click to collapse
Tried same as, use "Resco Registry". Thanks!
xplode said:
chenge the reg, then press the power button(device goes on standby), then wait 15 seconds(at least), then press reset
Click to expand...
Click to collapse
Dear xplode,
I tried more than 10 times still can't memory registry changed. Do you know is any program installed will cause this problem.
Thanks a lot.
You have very strange issue, i do my registry editings with Resco mostly
have you thought about that some software may change the registry entryes or keys on bootup to the way they like, and even if you change them on reboot the entryes are lost
try to change reg's to a clean rom, it is software issue but i am not sure which software makes this
athena99 said:
Anyone have same problem after change registry key and wait a few mins, but after soft reset a setting can't be save and back to the original key.Thanks!
Click to expand...
Click to collapse
Just curious, which registry keys?
There's also a possibility that programs "auto-loading" during startup might be causing the problem.
I've been using the freeware reg editors from PHM & .Fred's Task Manager & both works in "all" of the AKU 3.5 ROMS here.
You may try to install the test cab attached which changes the label of your left & right softkeys to Test1 & Test2 respectively. Changes are effective immediately, soft reset & see if it gets retained.
xplode said:
You have very strange issue, i do my registry editings with Resco mostly
have you thought about that some software may change the registry entryes or keys on bootup to the way they like, and even if you change them on reboot the entryes are lost
try to change reg's to a clean rom, it is software issue but i am not sure which software makes this
Click to expand...
Click to collapse
Thanks xplode, I waiting for you latest 3.5 rom and test it.

Modifying the Registry Does not stay

I am trying to modify the registry (do not wnat the SIM contacts to show). Well strangely anought if I modify it I see the effect right away even without restarting. But once I restart (Power Down & Power up, or soft reset) the reg change reverts to the original setting. I know this was a problem on some smartphones you needed to modify some kind of registry setting to get it stick, but that also meant that your Device ID (for TOMTOM e.g.) would change as well... Anyone ??
Sure that you did power-down and -up?
What you describe sounds like a soft-reset; the changes won't stick.
Do your change, save it , power down by hold in the on/off button. That will stick.
1- Change the reg key
2- Close ALL open programs
3- Power down (normally; NOT holding button for long time)
4- Wait at least one minute!!!
5- Power up, and reset after at least 20 sec pause...
Changes should stick then...
I'm not sure why it is, but changing the registry not to show sim contacts sets itself back to its original setting after a reset. I've changed other registry settings and they all stuck. If you notice, in the contacts-->menu-->options you have the option to show contacts only which hides the sim contacts but as soon as you reset your phone they come back there too. Apparently HTC thinks it's important to always see your sim contacts and not have the option to hide them or something.
Moaske said:
1- Change the reg key
2- Close ALL open programs
3- Power down (normally; NOT holding button for long time)
4- Wait at least one minute!!!
5- Power up, and reset after at least 20 sec pause...
Changes should stick then...
Click to expand...
Click to collapse
Moaske!
Thanx but it still does not stick. Funny is though that when I do change the reg key the effect is immediate, on my old Vario II I needed to reset before the change was active, and on the TyTn II the change is effective right away, because after changing I looked in my contacts and al the SIM contacts are gone. But after a reset (following your instruction) the reg key is back to 1.
OK I just changed another reg key (the one that controls the dialer skin) and that one sticks... I think xeno1 is right HTC seem to think that We always want to see our SIM contacts!?
Anyone with a solution ??
I've got an idea, but not quite sure how to impliment it, but it should be pretty easy. If you've noticed, you don't have to do a soft reset after you do a registry settings change, the effects are immediate. Anyone know how to put a file in the startup folder that will just do the registry settings change on boot up?
xeno1 said:
I've got an idea, but not quite sure how to impliment it, but it should be pretty easy. If you've noticed, you don't have to do a soft reset after you do a registry settings change, the effects are immediate. Anyone know how to put a file in the startup folder that will just do the registry settings change on boot up?
Click to expand...
Click to collapse
Ehm...maybe this may be to easily thought up, but exporting a reg key from your reg editor, and placing that file in the startup folder, would that work?
Moaske said:
Ehm...maybe this may be to easily thought up, but exporting a reg key from your reg editor, and placing that file in the startup folder, would that work?
Click to expand...
Click to collapse
I tried that and as soon as my phone reboots the registry editor opens as if it's importing that key and then shuts back down again but when I open up the reg editor again it's back to 1. I've also tried just going to the reg file in file explorer and clicking on it and still it won't let it change that one key. This is starting to make me really wonder why that key is so important that they need to lock it like that.
Im glad im not the only one with this problem.. guess ill wait for a fix.
waiting for a fix as well...
I have a fix, thanks to NuShrike over at MoDaCo.
xeno1 said:
I have a fix, thanks to NuShrike over at MoDaCo.
Click to expand...
Click to collapse
tested, and working. Thanks
Excellent, worked like a charm...Thank you

How to modify registry on Kaiser?

Hello. I have problem with my Kaiser. I want to remove some stuff from setting (task manager, comm manager etc.) but always when i remove keys in registry they back on next soft reset. I make soft resets by psShutXP. How i can remove stuff from settings? Anybody can help me? I have original ROM from HTC. Thanks for any reply.
Sorry for my english.
Best regards.
Why don't you try a softreset without the tool but just via the normal way.
In situation when i try to make soft reset in normal way (by stylus) keys back too...

starting over

ok new to window mobile. i have tweaked alittle on my phone and am wondering if i did the clear storage and soft reset before the 3 seconds. would that clear all the software i have downloaded and give me a fresh start.
alphadaddy said:
ok new to window mobile. i have tweaked alittle on my phone and am wondering if i did the clear storage and soft reset before the 3 seconds. would that clear all the software i have downloaded and give me a fresh start.
Click to expand...
Click to collapse
No you need to hard reset.
https://www.wireless.att.com/suppor...alsCategory=Getting+Started&tutorialId=613850
ok
ok so this will get rid of all the software and cabs exe and read me file and anything else ive put on the phone. after doing this will i be able to sync with outlook for my contacts back. one other thing. i have re mapped my ptt will this be affected due to the program i downloaded to make this happen. file named oem assign ptt button
It will erase everything you have done. The phone will be exactly as it was when you first booted it up. Clean slate.
Oh and yea, you can use activsync to get your contacts back, but I save mine to the sim card as well, just in case.
what about the ptt remapping with some reg edit and program oem assign ptt button
alphadaddy said:
what about the ptt remapping with some reg edit and program oem assign ptt button
Click to expand...
Click to collapse
EVERYTHING THAT IS STORED ON YOUR DEVICE (TWEAKS/PROGRAMS/PORNO)!!!!!!!
Damn
alphadaddy said:
what about the ptt remapping with some reg edit and program oem assign ptt button
Click to expand...
Click to collapse
all registry changes and program installations will be undone. Think of a hard reset as you would think of reinstalling windows on your PC, all settings, programs, etc... are lost. Hope I helped. lataz.
Hard reset will get rid of everything, the boot following the hard reset will be at factory settings - just like if you bought it today.
When the screen says customization starting in 3 seconds, after the hard reset, insert stylus and do a soft reset. That will rid your phone of all the extra AT$T bloatware.

Categories

Resources