Iphone dialpad skin hangs WM. - Tilt, TyTN II, MDA Vario III General

Hi All,
This is my first post here...
Has anybody using the Iphone dialpad skin experienced this issue?
You call one of those places where you need to "Press 1 for xxxx, 2 for xxxx", so you touch on "Keypad" to bring the leypad up and enter the number, then when you click on "Call Status" to bring the "Mute", "Speakerphone", etc menu up and the phone hangs completely, you can still hear the conversation, but can't do anything else...
This only happened to me while the Iphone dialpad skin was installed, tried many others and they all work fine, a shame as the Iphone one is really nice.
I've searched the forums but no mention of this issue anywhere.
Thanks,
Fernando.

fpanaggio said:
Hi All,
This is my first post here...
Has anybody using the Iphone dialpad skin experienced this issue?
You call one of those places where you need to "Press 1 for xxxx, 2 for xxxx", so you touch on "Keypad" to bring the leypad up and enter the number, then when you click on "Call Status" to bring the "Mute", "Speakerphone", etc menu up and the phone hangs completely, you can still hear the conversation, but can't do anything else...
This only happened to me while the Iphone dialpad skin was installed, tried many others and they all work fine, a shame as the Iphone one is really nice.
I've searched the forums but no mention of this issue anywhere.
Thanks,
Fernando.
Click to expand...
Click to collapse
Microsoft would see that as a "feature"

yes, this is very frustrating with the Narg iphone dialer.
I am in for a $25 donation if someone will fix it for the Touch!!!!

Yes, I can confirm x5 today that it hangs the whole WM6.5 (Joshs 21725_Light_5-30) any time you access the buttons on the Call Status screen. Only SR will bring back phone..... ukk

And upon further research and trying various other dialers, I can attest that the only way that the Opal dialer works on Kaiser/Tilt WM6.5 is via Anryl ROM (per other user reports) as of today 6/5/09.
So the long answer is, Both iPhone type dialers are broken and will not work and are no longer being developed, and the OPAL one needs fixing to work on WM6.5 ROMs other than Anryls, and I love Josh's ROM too much to change

I se we are digging in the graveyard again ?

Related

Touchflo for Treo 750

Anyone heard if this is possible?
Hmmm...I'm interested in that too!
I saw a repack of the requisite files floating around elsewhere - I might give installing it a shot and see what happens.
Worst case is it hard resets my device or shoots freaking laserbeams across the house, hitting my brother's girlfriend, which at the moment I would consider a useful feature...
culd some one post a picture of it running on treo 750 ?
what means touchflo? .. give me link or explanation.. thx
vasek said:
what means touchflo? .. give me link or explanation.. thx
Click to expand...
Click to collapse
check out the HTC Touch
I think with the touchflo interface, the 750v would be near perfect!
That being the case, gimme it please
Simmiter....if you get hold of it and make it work...can you post a few pics and give a comment on your expedition?
Cheers
motorwayne
justin_stuckey said:
Anyone heard if this is possible?
Click to expand...
Click to collapse
I went ahead and install the 5 tab htc today plugin and played around with it. Their seems to be a stability problem as the treo now would randomly reboot itself. I tried installing it after a hard reset and it seems okay but started rebooting again after installing my apps. got rid of it for now... hehe
just installed the 6 tab htc home no trouble so far awaiting the probs though
hey guys i heard that the 3 tab works with our 750...i heard it somewhere in the touch threads...btw id we install it, with a simple uninstall and a soft reset, will it get everything back to normal??? or a hard reset is what we have to do to get it normal again...btw where are you guys d/l'ing the touchflo for the 750 from???links please...
hey I have actually installed it on my Treo its loads with no probs. However there are a couple of conflicts like not being able to access the dial pad or call log via the call button. I have even experienced this error while clicking on call log or dial pad. After a little research I found it to be a conflict between the htc home and palm software. Simply clinkin on the left hand corner to initiate the x button pop up I can then click on both the call log as well as the dial pad with out a problem. As for the touch flo cube it does not fit the entire screen, I assume this to be just be the treos 240x240 screen. I also noticed the cube to be slow in it's revolving. If we can get past the conflicts and adapt the program to the treo's screen its possible we might even get it to run as smooth as it does on the artemis. I am shocked at the few interested in advancing such a feature on the treo. I am sure once the cooked roms start to surface we can truly unlock the power of the device.
which touchflo program did you load and where did you get it?
Issues...
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Touchflo on the Treo 750
Does anyone know how to contact PDAViet? He would be our best option. He may be kind enough to make a rom for the 750 ?? Holding my breath ...
TouchFLO and HTCHome are two very different things.
zeek112 said:
TouchFLO and HTCHome are two very different things.
Click to expand...
Click to collapse
Can someone send me the File for both TouchFLO or HTCHome? Thanks.
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
[email protected] said:
Another issue with the Touch Flo Home on the Treo 750, is that the green and red button don't work correctly anymore...
Normally, when you press the red button, the device go to sleep mode, that don't work anymore...
When you press the green button, you don't have the menu with the last call...
That's very annoying for my part...
So I uninstall the Touch Flo Home. Try with the Kaiser's Version and have the same issue...
Click to expand...
Click to collapse
I installed the 6 Button Kaiser HTC home plugin on my Treo 750 and have no problems with it @ all. As for the green and the Red buttons, all u have to do is add the "Dial Lookup" to the Today screen and the green and red buttons will work perfectly.
HTC Home and TouchFlo are 2 totally different things. HTC Home is the Today Screen plug-in, TouchFlo is the 3D cube, finger scrolling etc which was 1st introduced in the HTC Touch phone.
trjons said:
I'd like the link to the CABs of the Touchflo and/or HTC Home that anyone has working on the 750.
Thanks in advance.
Click to expand...
Click to collapse
HTC Home
http://forum.xda-developers.com/showthread.php?t=327646&highlight=6+tab+htc+home
HTC TouchFlo is not as easy as just a cab to install. TouchFlo needs to update files on the device that can't be changed will the OS is running, n that's why TouchFlo has to be cooked in the ROM
Ok....
With Dial Lookup checked, the red and green buttons work! Thanks for that.
The problem now is that there is wasted screen real estate below the Kaiser plugin for the network carrier logo.
Hidelogo causes resets so don't bother.
and if you try to type contacts by name they go off the bottom of the screen. is there a way to use the screen better?

s2u2 slide-to-answer problem

Hi,
Has anyone got the s2u2 Slide to Answer feature working?
I've got S2A turned on, but when a call comes in, it looks like S2A and the TouchFlo answer screen are fighting it out as to which one gets control... there is lots of flickering on the display, and it switches back and forth between the S2A and the Touchflo answer screens.
If you press the screen, it seems that the TouchFlo is getting priority, as the Answer or Ignore buttons will work, even if they aren't actually being displayed.
Anyone managed to get this working properly?
I'm using S2U2 version 1.03.
Thanks for any suggestions.
Regards,
Ben
ben_gb said:
I've got S2A turned on, but when a call comes in, it looks like S2A and the TouchFlo answer screen are fighting it out as to which one gets control... there is lots of flickering on the display, and it switches back and forth between the S2A and the Touchflo answer screens.
Click to expand...
Click to collapse
lol
That sounds like fun.
I suppose you can disable TouchFLO 3D, although you probably don't want to do that. You might be able to stop TouchFLO 3D from handling calls with a registry edit, although I doubt it...
I have the same problem. After several tries, I found two solutions. The first one is using AdvanceConfig to disable 'phone skin', after restart, s2u2 works properly. But the dialpad is no longer the diamond style. The second one is to install another dialpad to replace the existing diamond dialpad.
But i really love the existing diamond dialpad, so I gave up the s2u2. hehe, really hope someone can fix this problem.
So can you still utilize all the other S2U2 goodness besides S2A feature? If so, I'd happily turn off S2A and keep all else. Though a proper solution would also be the preference.
yes, other functions work in a good condition
i really love the existing diamond dialpad, so I gave up the s2u2. hehe, really hope someone can fix this problem.
has someone found a solution?
i blocked the touch function of the screen when there is incoming call. So now i use hardkey to pick up the phone. For s2u2, A_C also realized the problem, hope he can fix it in the near furture
bin862cn said:
i blocked the touch function of the screen when there is incoming call. So now i use hardkey to pick up the phone. For s2u2, A_C also realized the problem, hope he can fix it in the near furture
Click to expand...
Click to collapse
how could you block the touch function when there is an incoming call?
ageye said:
how could you block the touch function when there is an incoming call?
Click to expand...
Click to collapse
I'd like this answer too, i love so much s2a and the other functions but i love the classical tflo dial pad(i'm a little bit confused about all the tweaking and installing out the box apps that may get in conflict with others!)
However i still think that Diamond will be a superphone in one month or two with all the geniuses around here
There is another thread with exactly this issues. If you have managed to block the touch screen and just allow the hard keys, how did you do it?
up up.
Does anyone found a solution? My S2U2 worked great, untill this morning.....Now I have the same problem.
How can help.....
You can keep touchflo3d dial pad with S2U2, just have to edit registry "HKLM\Software\HTC\Biotouch" make a new Key called "Disable4SpecificApp", and inside this another one called "S2U2", inside this a new string wich "value name" is "classname" and its "value data" is "S2U2"

Raphael Caller ID for Kaiser

Hi,
i´m looking for this Caller Id from Raphael, or advice how can i disable opal caller Id "with sliders" from hyperdragon III blackstone
killerGBU said:
Hi,
i´m looking for this Caller Id from Raphael, or advice how can i disable opal caller Id "with sliders" from hyperdragon III blackstone
Click to expand...
Click to collapse
I think this might give you what you want. Not sure if it will intall over that you have now. I used it once , but I prefer the slide to answer. It keep me from accently hitting the hang up button when holding the phone to my face or answer while phone is in it's case, or me grabbing it, before I can see who's calling.
Try this, hope it's what you're after:
thx,
i helped, bud i dont see color and mute button. It doesnt matter, i´m glad that hw keys is now working.
Sorry, I don't remember the exact detail of the dailer.
Keep an eye on it. On my ROM this (maybe, don't recall specificaly) and the opal dailer start out working but soon after break.
Hope you find what you looking for.
I've tried installing this cab on my HTC 6.1 ROM, but it only changes the startup pin screen and nothing else. Any other versions that will work on a standard ROM to get the call id screen like above?

[REQ] HTC Black Dialer Cab

Hey guys,
I just did like 5 different google searches through the site and I cant find the HTC Black Dialer/Phone Canvas cab.
Does anyone happen to have one?
Thanks a bunch!
Daniel
You didn't look hard enough I tell you
right on!!!
Honestly I did, the closet thing I found where the black IMG files from LantisOS ROM, but that didnt include the phone as well.
Thank you for the cab!
EDIT: Im trying to install this on top of Da_G's latest 6.5 ROM, and I am still getting the default Windows Dialer...do you know what I can do to make this work?
Yes, sometimes it's hard to find certain things. I simply wanted to find the black manila start panel skin for my TP and it took me hours but I finally found it.
Is there a version without the slide to answer?
I installed this cab and love the look but have been experiencing a glitch; the on-screen buttons get blurryed and are not responsive once a call is dailed and I press send. I cannot access the speakerphone/note/end call etc that are displayed in a blurred fashion...anyone else getting this?
D3TH METAL said:
Is there a version without the slide to answer?
Click to expand...
Click to collapse
I am not sure whether this is what you are looking for, but it really looks cool
http://forum.xda-developers.com/showthread.php?t=438412
bugsy714 said:
I installed this cab and love the look but have been experiencing a glitch; the on-screen buttons get blurryed and are not responsive once a call is dailed and I press send. I cannot access the speakerphone/note/end call etc that are displayed in a blurred fashion...anyone else getting this?
Click to expand...
Click to collapse
I think it might be possible that it is the in call curtain you see. Have to slide it down to access buttons behind it.
jmckeejr said:
I think it might be possible that it is the in call curtain you see. Have to slide it down to access buttons behind it.
Click to expand...
Click to collapse
I think you are right, thanks for the info!
Well this one was the charm for my Sprint TP. Works Great, and did not foul anything up
to whoever said they tried the s2a on wm6.5 with no luck.. I believe that the dialer is still an issue with wm6.5 that has yet to be fixed..compatability issues between htc and m$ i think..I also tried installing s2a and when i would receive a call the screen would glitch and switch between the traditional 6.5 slide to answer, the older 6.1 style answer screen, and the s2a screen lol very glitchy...

new to WM 6.1 and having issues

ok so Im a noob when it comes to the HTC tilt. i bought it about a week ago and since then i have upgraded to WM 6.1 and installed the Kaiser Tweak, Black Theme, Opera Mobile 10 beta and Mobium GPS software. The phone seems kind of laggy, when i go to "wake it up" it will occasionally flash then immediately go "back to sleep". I also noticed today that when i slide the keyboard out to txt message, the word completion window pops up with nothing in it and if i hit the menu tab there are just hyphens in it, no actual words i.e. delete, forward,insert......so on. I need help. i flashed the WM 6.1 last night and didnt have these problems till about an hour or so ago....with the exception of the lag.
Welcom to the WM 6.1 'upgrade'
Although I've never had a Tilt (mines just the HTC version of a TyTN II), some of the issues you describe were problems I'd found with the default HTC 6.1 upgrade. Sometimes what people expect to be an improvement because it's newer, isn't necessarily better. If you want to go back to how it was, read up the Wiki here at xda-dev which will tell you how you can flash back to the original WM 6.0 setup (or perhaps you may prefer the slightly newer but still WM 6.0, 1.62 series ROM referred to here ).
ok....well ive been browsing and ive seen ALOT of these "cooked" roms. what r these exactly and has anyone had luck with a specific one. i know that everyone has their preference but again...im new. I dig the black theme and the threaded SMS is a must have. i also like the kaiser tweak....does any one have a file for threaded SMS if i decide to go back to 6.0
Maybe something about it in the wiki
rustypnus said:
ok....well ive been browsing and ive seen ALOT of these "cooked" roms. what r these exactly and has anyone had luck with a specific one.
Click to expand...
Click to collapse
No, no-one has ever had any luck with a cooked (or customised) ROM... But seriously if you want to know which is best it will depend what you want it to do and even then asking which is best is frowned upon here at xda-dev (because it can cause flame wars so it's a no-no). What most people do is try them and see. I've tried a few and always ended up going back to stock to get fast GPS. Have a search for threaded SMS - I don't recall if that's possible under WM 6.0 but maybe there's a cab around. Have a good read in the wiki section as well -there's lots of usefull info in there. I hardly ever use sms so what I have is good enough for my needs.
Check out Solace v3.1,
looks pretty spiffy if you ask me. Finger-friendly as well.
rustypnus said:
ok so Im a noob when it comes to the HTC tilt. i bought it about a week ago and since then i have upgraded to WM 6.1 and installed the Kaiser Tweak, Black Theme, Opera Mobile 10 beta and Mobium GPS software. The phone seems kind of laggy, when i go to "wake it up" it will occasionally flash then immediately go "back to sleep". I also noticed today that when i slide the keyboard out to txt message, the word completion window pops up with nothing in it and if i hit the menu tab there are just hyphens in it, no actual words i.e. delete, forward,insert......so on. I need help. i flashed the WM 6.1 last night and didnt have these problems till about an hour or so ago....with the exception of the lag.
Click to expand...
Click to collapse
Well I'm not sure if you have tried that or not but, did you check your memory?? like is you mobile memory or even your memory card full or kind of full?? that really makes the mobile sooooooo slow and boring specially if you have an 8GB almost full memory card. One more thing, it's better if you close the word completion option as i had a problem before that the mobile had saved too many entries that it reached a limit were each time i try to write a msg it just freezes the whole mobile and that problem wasn't solved except when i stopped the word completion
rustypnus said:
ok so Im a noob when it comes to the HTC tilt. i bought it about a week ago and since then i have upgraded to WM 6.1 and installed the Kaiser Tweak, Black Theme, Opera Mobile 10 beta and Mobium GPS software. The phone seems kind of laggy, when i go to "wake it up" it will occasionally flash then immediately go "back to sleep". I also noticed today that when i slide the keyboard out to txt message, the word completion window pops up with nothing in it and if i hit the menu tab there are just hyphens in it, no actual words i.e. delete, forward,insert......so on. I need help. i flashed the WM 6.1 last night and didnt have these problems till about an hour or so ago....with the exception of the lag.
Click to expand...
Click to collapse
for the bold part in the quote above, disable cleartype in landscape...the functionality is broken in most combinations of video drivers with WM6.1 on the kaiser.

Categories

Resources