Database Develop

blue tooth activesync and cingular 8125

Need help. Trying to set up blue tooth on cingular 8125. Just bought new kensington bt and it set up serial com as com 4 and 5. The phone only gives u the option of com 6 and com 7. Any ideas? The BT does connect to phone but activesync cant find phone. Tried activsync 4.1 and 4.2. Thanks in advance for help.

I'm having the same trouble. i scoured this and other forums but can't find any info on this problem. I think we may need to upgrade the rom on our phones. I'm still running the stock rom and i think if we upgrade that might correct the problem.

I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.

bob_beringer said:
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
Click to expand...
Click to collapse
This is the simpliest method to fix the problem.
I had many bad rounds of this and finally did a reinstall of the bluetooth and then Active"stink" (crappy program for many reasons).
You have to make sure that you can identify the port that you 8125 establishes a bluetooth session with beforee you try to sync with. This port number is used in Activesync to know which port to talk through.
Please make sure that in the connections of Activesync that you choose the port for which you identified as bluetooth connected to your device.
THEN try to re-establish a bluetooth Activesync connection from your 8125 (pair it if you need to) and "bing" there should the option for Activesync.

ktwildchild said:
bob_beringer said:
I talked to the support team at HTC about this issue, they say that the activesync feature is a function of the drivers that are loaded onto your PC. If you pair your phone and don't see activesync as an available option, then try to upgrade or reinstall your BT driver. I wouldn't have thought it would work, but a simple uninstall and reinstall of my existing bluetooth software fixed the problem for me.
Click to expand...
Click to collapse
This is the simpliest method to fix the problem.
I had many bad rounds of this and finally did a reinstall of the bluetooth and then Active"stink" (crappy program for many reasons).
You have to make sure that you can identify the port that you 8125 establishes a bluetooth session with beforee you try to sync with. This port number is used in Activesync to know which port to talk through.
Please make sure that in the connections of Activesync that you choose the port for which you identified as bluetooth connected to your device.
THEN try to re-establish a bluetooth Activesync connection from your 8125 (pair it if you need to) and "bing" there should the option for Activesync.
Click to expand...
Click to collapse
If you guys still have problems with this after let me know. I played with this for a few hours about a month ago and could retrace my steps. A couple of phone reboots after setting up the ports helped

Just to add, I noticed that once I upgraded the ROM to Summiter's 2.25 I was able to walk out of BT range and when I returned re-sync via ActiveSync without doing a soft-reset of the phone.
As SK7575 said, be sure to post there are plenty of folks using this connectivty option and it does work....

And I had this working - nicely syncing between my cingular 8125 and laptop via BT!!
But then I tried to get my 8125 to connect to my new wireless network - which did not work - and in the process of trying everything I must have broken something, because now after trying everything imaginable I just never see that activesync service on my 8125 any more.
The last I tried was to remove all the BT serial ports from device manager after deleting them from the HP bluetooth neighborhood (I have a bigger HP laptop with built in BT).
Then rebootet and four new BT ports were found and installed. Then I told the HP software to make a new incoming port (they call it service) and got COM 5. Then I told activesync on the PC to use COM5 for syncing.
Made sure all pairing was removed. booted both the HTC and PC - paired the two - bang - no 'activesync' service.
Now I am running out of options especially as I don't know how to un- and reinstall the HP software that comes with the laptop.
Any ideas?
Thanks
Gunter

I also have the HP BT stack on my laptop and ActiveStink does not sync with my MDA.
Any answers here, may help get me synced via BT.
Is the trick to see which USB port comes alive when I connect MDA via USB?
and use that on my PC for ActiveSync to listen to via BT on my laptop?
Thanks
--
NB

I'd be glad to hear if someone has the Belkin F8T012 USB dongle and that they have that working with bluetooth ActiveStink.
'Cause everything I've tried, I never ever see the "Activesync" profile appear on my device when pairing, I only see an available Serial Port.
Does anyone know the details of how that active sync profile is cretaed on the 'puter? If I could troubleshoot from that angle, I bet I'd have it working...
-Chuck

Bluetooth sync

How to sync Kaiser with activesync over bluetooth? I paired both devices but only one service is available from Kaiser and no services from PC. Anyone with an idea? I'm not so retarded for mobile phone, computers and stuff but this is over my head. I have XP with SP2, paired devices and only one service (dial-up networking) which is seen on PC and offered by Kaiser. No services are available from PC when I look in BT settings in Kaiser. So?

google it. I did. there's lots of instructions out there. once paired you should load active sync on the kaiser and click connect

Read the help file in activesync on pc and search for bluetooth.
The procedure there sorts it out fine.

Yeah, it drove me crazy for a while too.
By what i remember, u cannot choose just 'any' COM port on the kaiser and on the lapop. I had to setup activesync (on PC) to COM7 (this depends on your laptop, mine is a VAIOTX).

Here is what i used
http://axim.dpicts.com/
if you cant follow that, you need help

kireol said:
Here is what i used
http://axim.dpicts.com/
if you cant follow that, you need help
Click to expand...
Click to collapse
Kireol, you've just made my day! Thanks a lot!

Possible bluetooth sync whit vista?

Hello!
Is"t possible get my kaiser and vista syncronization to bluetooth? That option have kaiser mobile phone but nothing happend when i activated that.
I want my kaiser syncronization when i put that my computer table, my second phone nokia do that automatically when i come closed my computer and i want same happend my kaiser.

Hi,
I managed to get my Kaiser syncing with Windows Mobile Device Center v6.1 and Windows Vista Home Premium.
I started to pair my laptop and my Kaiser first.
Further I went to Activesync on my Kaiser and there choosed to connect via Bluetooth.
That should be all!
Good luck

Funny, now i do everything again couple times and now it"s starting sync, i dont know what is problem before. Before it connect but not sync.
Is"t that sync possible make automatic when i coming close my computer? Some reg hack?

Pairing Diamond with OSX

I can't seem to pair my Touch Diamond with my MacBook Pro running 10.5, they can't see each other via bluetooth at all no matter which side initial the search. I wonder if there is anyone came across the same situation and have a solution or any ideas what may went wrong.
I have tried with the original stock rom and two different cooked rom, still no luck...

which sync software do you use on OS X ... i'm using "the missing sync 4.0.3" ... everything works fine

I just want to pair them with bluetooth and use PAN to use my data connection.
Any idea?

Do you want to use the data connection of your Mac? I only was able to use the data connection of my diamond via Bleutooth-PAN. The other way around seems to have an issue.
I have posted this question also to the discussion forum at apple.
http://discussions.apple.com/message.jspa?messageID=7632465#7632465
About pairing both (Mac and Diamon) this works for me (MBPro OS X 10.5.4). Have you enabled the "visibility" of both devices during pairing?

Hi,
Its possible to use the Diamond as an internet modem with OSX.
I had tried to get this to work for the last couple of weeks.
It really depends on your bluetooth dongle. I had success with Cambridge Silicon based chipsets. I had a Belkin one and another generic one which didn't work.
You need to pair it from within OSX. You'll know its successful when it displays an option for joining bluetooth PAN after pairing. You'll have an option to "Join Network" under the paired device submenu in the OSX Bluetooth menu.
Once its done, all you need to do is start ICS on ur Diamond and select Bluetooth PAN, than Connect. After that, select "Join Network" on ur Mac and off you go!.
You can also connect the diamond to the USB port for power.
I tried USBModem which didnt work.
My laptop is an Acer 5570 hackintosh. Hope this helps.

rtao said:
I can't seem to pair my Touch Diamond with my MacBook Pro running 10.5, they can't see each other via bluetooth at all no matter which side initial the search. I wonder if there is anyone came across the same situation and have a solution or any ideas what may went wrong.
I have tried with the original stock rom and two different cooked rom, still no luck...
Click to expand...
Click to collapse
Probably a stupid question but have you ticked the box on the Diamond that says "Make this device visible to other devices"?
It can be found under Communications - Settings menu - Bluetooth
and it's on the Mode tab.

I want to use my ICS via PAN, and I can't pair my Diamond with my MacBook Pro with bluetooth, they can't see each other no matter which side I initial the search and I am sure both of them have turned on the discoverable option....

I can pair my diamond with my iMac ONLY if I disable TF3D!
I use Eltima SyncMate (epert edition) to sync and it's working great.
Only if I leave TF3D on the driver on the diamond will crash.
Luckely it's quite simple to disable TF3D n a few clicks.
(Start>settings>home>unselect TF3D>[OK])

Eltima has updated their drivers.
It works now:
Syncing (folders, contacts, mail etc etc) while TF3D is running

There are a few solutions available in case you have not already solved the problem:
The free part of SyncMate works well for contacts and calendar and supports internet sharing
http://mac.softpedia.com/progDownload/SyncMate-Download-28111.html
I am running OS X on Dell 1525 with Bluetooth Internet sharing with HTC Diamond, and syncing contacts and calendar with SyncMate with USB Bluetooth as a matter of routine.

Xperia Sync with Mac

Hi,
Just got my xperia today, but I'm still new to Windows Mobile. I want to transfer media files to my phone from my mac, is there any software that can let me do this relatively easily like by drag and drop? My mac doesn't seem to even recognize the x1. Also, I have a 8gb microsd card already inserted into the phone, but it doesn't seem to recognize the memory at all. Any help would be great, thanks.

I don't have a mac, so can't help much, but there's one thing I can think of. you might have tried it already, but...
Did you try going into Start > Settings > Connections > USB to PC and setting this to "disk drive"? I would have thought that this makes the phone act just like a USB drive, so there wouldn't be a problem as long as the Mac can see standard USB sticks.
Active Sync certainly won't work, it being Microsoft Active Sync, but maybe as a USB "Drive" it might...

Hi ... You must use Missing Sync ... you can use it via USB or bluetooth ...
Bye.

The Missing Sync seems the most popular with Mac users - apparently really good:
http://www.markspace.com/products/windowsmobile/mac/windows-mobile-sync-software.html

I just use the Disk Drive option in USBtoPC.exe ...

Hey guys, thanks for the quick responses and help so far. The disk to drive has an issue because it needs a memory card to be inserted, and mine isn't being recognized for some reason. Oddly enough, whenever I unplug it from the miniUSB, the memory card suddenly becomes available. I downloaded the Missing Sync but I may have gotten a weird version or something(4.0 something) that was talking about a patch.
Feel really stupid about this. Is there any easy way to just drag and drop music and videos onto this phone?

Sync wth Mac
Hi Guys,
I am using a WM5.0 Dopod 838 Pro but looking to change to experia soon. I used eltima syncmate to sync my Dopod to my Mac. The freeware works great and IMHO, it is more stable than Missing Sync.
Cheers

aFo3262 said:
Hey guys, thanks for the quick responses and help so far. The disk to drive has an issue because it needs a memory card to be inserted, and mine isn't being recognized for some reason. Oddly enough, whenever I unplug it from the miniUSB, the memory card suddenly becomes available. I downloaded the Missing Sync but I may have gotten a weird version or something(4.0 something) that was talking about a patch.
Feel really stupid about this. Is there any easy way to just drag and drop music and videos onto this phone?
Click to expand...
Click to collapse
What ROM are you running?

I will check the rom version in a second, but I remember that it was dated for the 29th of August. I got the x1 to mount as a disk drive, but I was confused about where to drag my media files for the media panel to recognize the stuff in my storage card. Not only that, but dragging and dropping was incredibly slow and I was only able to get 5-6 songs on to my phone before the lag became unbearable.

hey guys thanks for the help in the missing sync. New problem now lol. I transfered my music and vids to my memory card and the media panel read it fine. But my touchFLO3d manila HD can't seem to detect any media from the card at all. Is there any way to change this?

I got my Xperia on Friday and have spent the last 2 1/2 days trying to sync it with my Mac using Missing Sync. I was using MS V4.0.3 and then after upgrading to V4.0.4 and a hard reset (I think) things stopped working. The MS activity log said it couldn't connect to the sync client on the X1 (I also couldn't sync my old Dell Axim X51v either). I tried uninstalling and re-installing multiple times but still no success. After 2 days, I binned MS thinking it was the problem and purchased Eltima's SyncMate. Again same result, couldn't connect with the sync server.
After much googling if found the following post (http://forums.markspace.com/viewtopic.php?f=5&t=5349) in Mark Spaces forums of all places. Copied and pasted the commands into Terminal restarted and everything is fine. Good old Apple.

Hi,
Using SyncMate right now with my new X1.
I'm using the free version, so far contact syncing is ok with the only problem being certain number fields in Mac's Addressbook not showing up in the phone. But this is pretty common problem among all Mac <-> WM syncing. Just need to play around with the info fields in Mac Addressbook.
Right now the problem is the internet sharing to the phone is not working (sharing Mac's LAN connection to the phone). I know this used to work when I was using the same copy of SyncMate with a WM 5.1 Palm Tero I had borrowed. So far SyncMate doesn't seem to show the dialogue box that it discovered a internet connection and is sharing it with the phone.
Of course the Mac has working internet connection.. I'm using it now...
Any help and advice on this issue or any other Mac <-> WM tips are welcome!

As was said above, I use syncmate on my wifes. I used to use missing sync but it didn't always seem to recognise teh phone and had limited features. So I use Syncmate now. Have also tried pocketmac whcih was similar. Both softwares allow you to sync files, contacts, calander, install softwares adn will also mount the phoen as a hardisc on your mac without stopping eth phone from still being able to access it (if you put it into usb disc mode the phone no longer has access to teh memory card untill you disconnect). They can also connect wireless, usb or bluetooth.
I'd try either of the above instead of missing sync. Missing sync just didn't do the job well enough if you ask me.
As for the internet conenction issue, mine just works......have you checked teh connection settings in teh actual phone?

Hi
I tried using the free version of Syncmate with my Xperia, it doesnt recognize my phone. I am using the latest R2 ROM version. Any help ???
thanks!

internet
can please somebody help me, i have a mac and se x1 and i cant connect on internet from my mac via x1 i tried everything over usb, bt, internet sharing, sync mate , nothing works please help.
p.s. sorry about my English

This has been posted in this forum before but here it is again … I've never successfully used my X1 as a broadband modem via USB (it has something to do with ActiveSync, I think however, I use my X1 as a modem all the time using BT).
For a BT connection:
1. Pair your X1 and Mac (using the OS X BT preference panel)
2. On the X1 start Internet Sharing - PC CONNECTION should be set to BLUETOOTH PAN and NETWORK CONNECTION to whatever your ISP requires - SELECT CONNECT down in the task bar (bottom left) - should now say CONNECTED.
3. On your Mac open the BT Preference Panel from System Preferences or the clicking on the BT status icon in the menu bar (top right of screen). Click on your Xperia device (to select it) in the left-hand side-bar. Its status should be displayed in the right-hand panel (paired - yes; connected - no). Click on the task button (the one with the cogged wheel next to the minus button, bottom left-hand corner of the BT preference panel and select CONNECT TO NETWORK - status should change to connected.
4. To disconnect - select disconnect in the task bar of Internet Sharing on the phone or disconnect from network in the Mac's BT preference panel.
The process has to be done in this order. If you don't connect to the internet with the phone first, the process fails.

nonno said:
This has been posted in this forum before but here it is again … I've never successfully used my X1 as a broadband modem via USB (it has something to do with ActiveSync, I think however, I use my X1 as a modem all the time using BT).
For a BT connection:
1. Pair your X1 and Mac (using the OS X BT preference panel)
...
Click to expand...
Click to collapse
What OSX version do you use to build up the PAN between Mac and Xperia?
Seems not to be OSX 10.4 because it has no
task button (the one with the cogged wheel next to the minus button, bottom left-...
Click to expand...
Click to collapse

Sync Xperia with mac
Hi everyone, new to the forum so bear with me. I've recently acquired the software "The Missing Sync" to be allowed to edit and fix up my phone through my mac. When I plug in my phone, the computer only recognizes it as a mass storage device and the program will not detect it. Do I need to update the firmware on the phone to up to date with the most current version of The Missing Sync? Any help would be greatly appreciated.
Regards