Connection Icons not changing - Tilt, TyTN II, MDA Vario III General

Hi all
My connection icons on the top menu bar don't appear to be behaving themselves...
Normally when I get a connection either through GPRS or Wifi the arrows usually become static indicating a connection has been made. At the moment whenever a connection is made they are continuously animated, as if they are trying to establsh a connection.
Is there a setting somewhere either through a tweak or registry where this can be put back to normal?
Thanks

Related

internet access

hi
I just got the diamond, my first htc phone my free internet browsing comes on in a couple of weeks but till then just wanted to have a quick browse, just wondered once ive closed the web page down does that mean its automatically disconnected from the net or do i have to manually turn it off, i dont want to get a huge bill from surfing the net the whole time when i think im not connected
thanks
The icon that displays the signal strength tells you whether you are connected or not. If it has an antenna icon, you are not connected. Any other icon (such as a "H", "E" or "3G") on the signal strength icon (notice how the antenna is above the strength) means you are connected. There are options to automatically disconnect after a while, I use this.
ok thanks for that mine says 3g at the top so how do i remove that to disconnect?
many thanks
ok had a look through the manual and what i think the icon (3g) i have is showing that it is available there are no signal strenths below it and according to the manual this is what shows im connected or two arrows if its connecting does that sound right?
thanks

How to stop internet connection

A silly question by a new user: how is it possible to stop an internet or data connection (no matter if hsdpa, edge, gprs) once started?
Thanks
use 'long key press' in settings, can be set to disconnect a data connection (sdpa, edge, gprs)
Use this program:
http://rapidshare.com/files/173250379/GPRS...onnect.CAB.html
The connection stop after 1 minutes of inactivity
jack1985 said:
Use this program:
http://rapidshare.com/files/173250379/GPRS...onnect.CAB.html
The connection stop after 1 minutes of inactivity
Click to expand...
Click to collapse
faulty url!
take this one:
GB-SOFT GPRS-UMTS_Tweak_WM6.1_Diamond
there you can choose the idle-time for disconnect
Anyway the manual stopping mode is to tap the bar that is on the top of the sceen...than tap the G E 3G or U icon and so you can tap disconnect.
Poker85 said:
Anyway the manual stopping mode is to tap the bar that is on the top of the sceen...than tap the G E 3G or U icon and so you can tap disconnect.
Click to expand...
Click to collapse
Cool, also in stead of holding the end call button, wich locks the phone in my case,
Dubbelclicking the end call button alse ends my edge connection.
In order for your end key to stop the connection, you have to go to Settings>System>Long Press End Key>Select Terminate data connection
Then when you press and hold your end key, it will end the connection
if you prefer to stop internetconnection by shortcut, try VJKeyPress.exe 126
this one toggles internet connection
i've searched and i've searched and i cant find the resolve!
after retrieving hotmail, the connection stays active, meaning bars are lit up. for HOURS after unless i long-press-end key or something like that. even when i am surfing the web, after a page is fully loaded, the bars stay lit. on my old diamond, the bars used to go gray or "dormant" etc. therefore no tweaks i have found help (i.e. most operate with this rule "if the connection is dormant/inactive for xx minutes, turn off data" etc. well my connection remains ACTIVE unless i manually intervene)
what is causing this??? i only have spb mobile shell and spb phone suite installed. stock ROM.
hello? anyone? NO one is having the same issue or can help with this??? at this point i'd even be happy with a rude comment about how i should learn how to search coupled with a few links to threads which contain the answers! :\
I'm not sure I understand your question.
You're saying the connection stays alive after using mail or opera?
By default, WMo does not turn off data connection, so once you've made a data connection, it stays on.
Now, there are lots of programs out there that turns off data connection after a pre-set time. If you have Advanced Config on your Diamond, it's somewhere in there as well (I use SKTools and not Advacned Config so I can't point you exactly where, but it's there)
That said, many have tested battery drain and find that leaving the data connection ON or OFF makes absolutely no difference on the battery drain. It's only when you're transmitting data that drains more battery. Not sure if that's where you're coming from to want to turn off data connection
number16 said:
I'm not sure I understand your question.
You're saying the connection stays alive after using mail or opera?
By default, WMo does not turn off data connection, so once you've made a data connection, it stays on.
Now, there are lots of programs out there that turns off data connection after a pre-set time. If you have Advanced Config on your Diamond, it's somewhere in there as well (I use SKTools and not Advacned Config so I can't point you exactly where, but it's there)
That said, many have tested battery drain and find that leaving the data connection ON or OFF makes absolutely no difference on the battery drain. It's only when you're transmitting data that drains more battery. Not sure if that's where you're coming from to want to turn off data connection
Click to expand...
Click to collapse
number16, my savior! i'll try to explain as best i can: when the data connection is started/being used, those left-right arrows appear above the signal strength, correct? what i call "active" is when those arrows are lit (presumably when data is actually being transferred). what i call "dormant" is when the arrows are still there but are gray/not lit (i.e. connection is still open, but not currently transferring data). well, up until a 2 wks ago, all seemed fine - the arrows would briefly stay lit when downloading a page, connecting to hotmail, etc, but then would go gray once the transfer was complete. now however, the arrows stay lit. sometimes for hours at a time even tho nothing is running, no data (that i know of) is being transferred, etc.
so what i was saying is that, yes, i know i can long-press-end key to shut it down, but that only works if i notice it otherwise it's just draining my battery. (most times it is in my pocket, and since it checks hotmail periodically, the data connection may open and stay on without me noticing). and yes, i know about advanced config setting (and actually, i DO have it set to turn off after a minute) BUT that only applies if "connection is not active for more than a minute". i.e. since my whole problem is that my data connection technically stays active, that advanced config setting doesnt work.
so my question is, what is keeping the connection active? why is it doing this? i am running stock ROM and only have spb mobile shell and spb phone suite loaded. and a few other minor tweaks via advanced config/regedit. i even tried spb wireless monitor to see what was active after a data transfer was complete (as far as i could tell) but it didnt really tell me anything.
does all that make sense?
thanks for any help you can provide...

Strange issue with data connection??

Hello i have this issue with data connection it seems to have started since using gremote, but that maybe nothing to do with it. when bluetooth is enabled i get a icon at the top of the screen with 2 arrows pointing left and right when i tap on this it says network card connected witht he options to go to comm manager it also shows orange mms (hsdpa) and i cant use any data services such as weather tab out brows the internet on ie or opera. is i close bluetooth this goes away and arrows turn in to a H and all data connections work fine.
what have i done wrong? i was also using the phone as a router but have removed that application to no affect as it was just a trial.
can anyone advise?
thanks
ANYONE? its driving me nuts!

Service icon won't refresh

Upon some reading of the user manual, I have decided to edit my post.
The service icon on my Tilt (shows the big E, 3G, H, etc), which also shows the wi-fi radio and whether I'm connected to a computer, has stopped refreshing itself.
After starting up, it shows the opposing arrows with an "x" indicating no service. I do have service, though. If I do anything (activate wi-fi, connect to a computer, etc), the icon changes to that, but once done, it stays there. It doesn't refresh back to the big H (or E) that should be there, nor does it go all the way back to the no service indicator.
The most recent thing I did before this happened was to try a registry tweak to remove the clock (and hopefully put up the battery meter) in PointUI Home 2. Even after undoing the tweak, the icon still doesn't work.
Any and all help is greatly appreciated.
If it helps have things make sense, it's the big connectivity icon, not the little service icon with the bars.
If I connect via wi-fi, when I turn off wi-fi, the icon stays the same. If I connect to a computer, when I disconnect, the icon stays the two opposing arrows. After a soft reset, I get the two broken arrows.
Regardless, I never get the E or H I used to normally have.
Help anyone?
I tried installing JUVS's Large Title Bar and while the small icon on the title bar wasn't right, the large icon for the connectivity was the large H I've been missing. I do have the small H with my signal bars, but have not had the big connectivity H icon (or E or G) for a couple weeks.
Does anyone have any clue?
Is the lack of suggestions due to things not being clear, or is everyone actually stumped?

TILT/KAISER and no data plan

Hello, I have a HTC TILT running WM 6.1 that I have purchased from ebay.
Recently I have noticed the 'E' - edge icon in the top right of my phone.
I am wondering if I might be being using any 'data' while this is on because I am not paying for an unlimited data plan.
I have searched and tested several programs...
Bandswitch - supposed to allow me to change the bands im using, however I have tried all of the settings and I still get the edge icon.
KaiserTweak - I have disabled Media Net and the other options
NoData - I have disabled ATT ISP GPRS, Media Net, and My Connection
And further more I have manually deleted the settings of these three under ... start - settings - connections - advanced - select networks - edit
----
thoughts? Am I still potentially using data?
ps, off topic - I have always turned my phone 'off' while using wifi and browsing... would I be using JUST the wifi connections while connected?
my my...dude you've got to read the manual that comes with the device. if you don't have the manual, i think you can download it as a pdf.
to put it simply, windows mobile tells you about your currently in-use connections and currently available connections in the following way.
all you have to do is look at TWO icons to get a full idea of whats going on.
FIRST ICON:
in the top bar, going from left to right, you will see a BIG icon that will show one of the following:
1. big "G" (this means that GPRS is AVAILABLE on the cell tower your phone is currently connected to)
2. big "E" (this means that EDGE is AVAILABLE on the cell tower your phone is currently connected to)
3. big "H" (this means that HSDPA/3G is AVAILABLE on the cell tower your phone is currently connected to)
4. a transmitting tower kind of icon (this means that your WIFI is ON. if WIFI is CONNECTED, the transmitting tower icon will have some arrows on it)
5. two arrows pointing away from each other and occasionally spinning indicates that the device is connected to your PC via ActiveSync.
summary: this first icon tells you which data speed is AVAILABLE on your phone network OR that WIFI is on and whether or not you are connected to some WIFI access point OR the current status of the ActiveSync connection.
SECOND ICON:
immediately to the right of the first icon described above, you will see an icon showing your phone signal strength. on the top-left corner of this icon, you will see one of the following mini-icons:
1. small "Y" shaped triangular symbol (the device is simply connected to a cell tower and your phone should be able to dial out and receive calls)
2. small "G" (this means you are connected to GPRS...your data connection may be in use. see summary below.)
3. small "E" (this means you are connected to EDGE...your data connection may be in use. see summary below.)
4. small "H" (this means you are connected to HSDPA/3G...your data connection may be in use. see summary below.)
5. small phone receiver icon (a call is in progress)
summary: this icon exclusively shows what your device is doing with the phone network.
PUTTING THE 2 TOGETHER:
if WIFI is on and connected (you can tell by looking at the first icon) AND your data connection is available and connected (by looking at the second icon), then the device uses WIFI, to the best of my knowledge. if ActiveSync is connected AND WIFI is connected AND your data connection is connected, then the device uses the ActiveSync connection to the best of my knowledge.
its really not that difficult to understand once you grasp the concept. hope this helps.
I appreciate the help, thank you. I bought it from ebay so i just got the model and the charger.
however...
1. small "Y" shaped triangular symbol (the device is simply connected to a cell tower and your phone should be able to dial out and receive calls)
2. small "G" (this means you are connected to GPRS...your data connection may be in use. see summary below.)
3. small "E" (this means you are connected to EDGE...your data connection may be in use. see summary below.)
4. small "H" (this means you are connected to HSDPA/3G...your data connection may be in use. see summary below.)
5. small phone receiver icon (a call is in progress)
summary: this icon exclusively shows what your device is doing with the phone network.
Click to expand...
Click to collapse
I understand...kind of... "your data connection may be in use" ...
im just looking for a yes or no really. If im texting and just calling and i have an EDGE icon will I be billed for extra data usage?
If the E is in a big square then it's just showing network connected to, if the E is above the signal bars then your data is connected to the network... Since you say using no data i imagine first is applicable
You was already given a rundown and on that info should be able to make your own assumption since we can't see your phone....
Texts and calls don't get charged for data "unless 3G call Video", you would need to be using an application that uses data to be charged for it.
godsp33d said:
Bandswitch - supposed to allow me to change the bands im using, however I have tried all of the settings and I still get the edge icon.
KaiserTweak - I have disabled Media Net and the other options
NoData - I have disabled ATT ISP GPRS, Media Net, and My Connection
And further more I have manually deleted the settings of these three under ... start - settings - connections - advanced - select networks - edit
Click to expand...
Click to collapse
WOOOWW
to connect to gprs/3g internet, you have to have correct settings, most importantly apn. this is what those tweaks do; they change your apn from correct for example "internet" to "internet00" so only what you really have to do is, make sure it's that way. or no settings at all. withour correct apn you won't connect. nodata works pretty reliable with doing so.

Categories

Resources