Database Develop

BatteryStatus may have killed my tilt

I was trying to install the Aurora theme on my phone. I was installing the list of programs it required, batterystatus being one of them. Once I installed batterystatus it told me to soft reset, so I did. Since then, the phone either constantly resets or freezes. I went to the batterystatus site and it said that I needed to let it reset 8 times. But I don't know what to do after it has reset 8 times. If I do anything but let it reset it freezes. I am not familiar with this software and am just hoping I didn't brick my phone.

someguy917 said:
I was trying to install the Aurora theme on my phone. I was installing the list of programs it required, batterystatus being one of them. Once I installed batterystatus it told me to soft reset, so I did. Since then, the phone either constantly resets or freezes. I went to the batterystatus site and it said that I needed to let it reset 8 times. But I don't know what to do after it has reset 8 times. If I do anything but let it reset it freezes. I am not familiar with this software and am just hoping I didn't brick my phone.
Click to expand...
Click to collapse
do a hard reset; you should be fine. a installed program very rarely will brick your phone (flashing is different)

How do I hard reset without being able to get to any software?

someguy917 said:
How do I hard reset without being able to get to any software?
Click to expand...
Click to collapse
you don't need any software to hard reset. You hard reset by holding the two soft keys and inserting the stylus into the soft reset hole on the bottom of your phone. Keep the soft keys pressed while you push in the stylus.. in a few sec you will get the grayish white hard reset screen. Hit "send" key to start the hard reset and after it has finished it will ask you to re-hit the send key to reboot your phone.

you are a life-saver. I owe you a beer.

someguy917 said:
you are a life-saver. I owe you a beer.
Click to expand...
Click to collapse
glad i could help i am muslim so don't drink but you can always donate to xda here to show your appreciation.

thesire said:
glad i could help i am muslim so don't drink but you can always donate to xda here to show your appreciation.
Click to expand...
Click to collapse
It's nice to see members with that attitude. Just wanted to give you the props you deserve for that. Nice indeed. +1 in my book.

Serial Screen on Start up

hello all, was just wondering if anyone could help me here, iv turned on my phone this morning to find it comes to a serial screen, and im not even able to put any serial in? iv not flashed it with a new rom or anything like that, never even touched the software side, no modifications have been made, so i honestly have no idea how this happened?
i was thinking maybe i should download the original rom for the phone and just re-install that? but im with orange and have been unable to find the original rom, so any help would be much appreciated,
many thanks
Dan

Have you downloaded ANYTHING to the pda at all? Sim/cid unlocker? Files from PC perhaps? If you havent I would try Hard Reset first.

nope nothing at all =/ iv tried a hard reset bu it wont leave the serial sceen =/ it some times flashes "no image file" aswell if thats any help?
Dan

What procedure are you going through for hard reset?

i was using the - hold down the two soft keys and then use the styles to press the reset buttom, remove the stylus, keepin the keys depressed and waitin 4 instructions.
iv just turned the phone on now after it bein off for an hour, and it works again? =S

Great news. I was going to suggest you remove the battery, then do hard reset but there ya go!

ah, that could have been wot fixed it then, because i left the battery removed =) anyway, many thanks mate =)
Dan

WTF, My Kaiser has gone CRAZY and hung itself???

Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks

GLO said:
Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks
Click to expand...
Click to collapse
First thing in such cases is a hardreset.

Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups.

Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups
Click to expand...
Click to collapse
Some software or setting you've done, or it was simply Murphys Law:
When the mistake could happen, it will happen

Should i upgrade the radio at this point?

Its like with PCs, u need to reinstall your operation system from time to time.

Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers

CLF said:
Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers
Click to expand...
Click to collapse
Hi:
You can go into start/settings/system/clear storage. That will hard reset your device.
EDIT: Oops, sorry I missed your last line. Please disregard my post

Unresponsive (bricked??) HTC Touch Pro 2. Help please.

Ok, so I have encountered something NONE of us EVER want to encounter. My phone has died. It will NOT boot up on battery power and is now cycling in the tri-color screen over and over again. It does this when plugged into USB port and wall outlet. I have the HTC Euro stock ROM on the SD card in the phone, trying to get it to reflash. It gets to the screen : "loading" and "checking" ....but then boots down again and cycles all over again.
I flashed the NRG 10/11 Photon ROM. I have the first HRDSPL from Olinex. My phone is the Euro version, unlocked, unbranded. I use TMobile in the US. .
Please, there has GOT to be someone out there that can help me. You guys are really sharp!! Please ....I need my phone!
I cannot even do a hard reset either. I push the power, send and end button all at the same time. I get no response.
What are my options here? Thanks in advance.

cabranscom said:
Ok, so I have encountered something NONE of us EVER want to encounter. My phone has died. It will NOT boot up on battery power and is now cycling in the tri-color screen over and over again. It does this when plugged into USB port and wall outlet. I have the HTC Euro stock ROM on the SD card in the phone, trying to get it to reflash. It gets to the screen : "loading" and "checking" ....but then boots down again and cycles all over again.
I flashed the NRG 10/11 Photon ROM. I have the first HRDSPL from Olinex. My phone is the Euro version, unlocked, unbranded. I use TMobile in the US.
Please, there has GOT to be someone out there that can help me. You guys are really sharp!! Please ....I need my phone!
I cannot even do a hard reset either. I push the power, send and end button all at the same time. I get no response.
What are my options here? Thanks in advance.
Click to expand...
Click to collapse
1: So if when you pull out your battery it goes off. And on reinsert, when you try to turn on or hardreset ie: hold the TALK/SEND, END and POWER buttons until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
At that point you release the buttons and press Volume up to perform.
It doesnt do anything?
2: As soon you do the AC adapter in or USB power, it starts cycling on his own? If not, try to hardreset then.
3: If you wait like 30 minutes, with cycling on USB on PC, can it hardreset out hisself? Ive readed another guy who had issues and somehow it fixed itself.

cabranscom said:
Ok, so I have encountered something NONE of us EVER want to encounter. My phone has died. It will NOT boot up on battery power and is now cycling in the tri-color screen over and over again. It does this when plugged into USB port and wall outlet. I have the HTC Euro stock ROM on the SD card in the phone, trying to get it to reflash. It gets to the screen : "loading" and "checking" ....but then boots down again and cycles all over again.
I flashed the NRG 10/11 Photon ROM. I have the first HRDSPL from Olinex. My phone is the Euro version, unlocked, unbranded. I use TMobile in the US.
Please, there has GOT to be someone out there that can help me. You guys are really sharp!! Please ....I need my phone!
I cannot even do a hard reset either. I push the power, send and end button all at the same time. I get no response.
What are my options here? Thanks in advance.
Click to expand...
Click to collapse
sorry to hear that, have you tried taking the battery out for few minutes & re-insert it in then connect your phone to PC to see if it let you re-flash again?
good luck m8

People are reporting the same thing after doing slide to reboot with NRG's 10/11 Photon ROM... Go check that topic, you are not alone.

Loco5150 said:
People are reporting the same thing after doing slide to reboot with NRG's 10/11 Photon ROM... Go check that topic, you are not alone.
Click to expand...
Click to collapse
He is one of those who reported that Really hope somebody van explain what can go wrong after a softreset.

pnxsinned said:
1: So if when you pull out your battery it goes off. And on reinsert, when you try to turn on or hardreset ie: hold the TALK/SEND, END and POWER buttons until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
At that point you release the buttons and press Volume up to perform.
It doesnt do anything? I can never get to that point. It does nothing. I see nothing on the screen. It just keeps cycling.
2: As soon you do the AC adapter in or USB power, it starts cycling on his own? If not, try to hardreset then. Again, I cannot hard reset.
3: If you wait like 30 minutes, with cycling on USB on PC, can it hardreset out hisself? Ive readed another guy who had issues and somehow it fixed itself.
Click to expand...
Click to collapse
I waited all night long for it to do that. No luck.
Now I get to the point where I see where it recognizes my .nbh file and has a splash screen. BUT......it will not go any further past that now. I press the power button to continue, but it just cycles again and the whole process starts over. I see a reallllllllllllly quick sliver of the update bar, but it disappears fast b/c of the recycling process.
Please dont give up on me. Thanks.

Loco5150 said:
People are reporting the same thing after doing slide to reboot with NRG's 10/11 Photon ROM... Go check that topic, you are not alone.
Click to expand...
Click to collapse
pnxsinned said:
He is one of those who reported that Really hope somebody van explain what can go wrong after a softreset.
Click to expand...
Click to collapse
um, yeah, that would be me in that disasterous situation.

I saw in another thread that you have tried removing your SIM card with no success. Have you tried without the SD card as well?
Also, does pressing the hardware reset button under the battery cover do anything?

Reepurr said:
I saw in another thread that you have tried removing your SIM card with no success. Have you tried without the SD card as well?
Click to expand...
Click to collapse
I do not have the SIM card in there. I never have flashed with a SIM card in there. Always read to take that out when you do that.
The SD has to be in there b/c it is the only thing that has a shot of getting the ROM to the phone. Active Sync wont connect b/c phone keeps powering on/off with its cycling issue. So the SD card must be present with the .nbh file on it. I am just in hopes that it will read it somehow. I am sooooo tired of pressing the power button for it to continue, only to have it turn right back off.
ps, reset button does nothing either.
ugh.

Aaah sorry, didnt remeber who was talking about it... There were few cases like that if I remeber correctly...
Ive been here since TyTN, does it make 4yrs or something? I have never heard anything like this.. Because the phone goes to the 3 color screen mode, Im pretty sure someone with skills will come up with a solution, but it might take time though...

Loco5150 said:
Aaah sorry, didnt remeber who was talking about it... There were few cases like that if I remeber correctly...
Ive been here since TyTN, does it make 4yrs or something? I have never heard anything like this.. Because the phone goes to the 3 color screen mode, Im pretty sure someone with skills will come up with a solution, but it might take time though...
Click to expand...
Click to collapse
So the 3 color screen mode. Exactly what is its purpose and why does it keep cycling over and over and over?

Its the bootloader, you should PM Olinex...

cabranscom said:
The SD has to be in there b/c it is the only thing that has a shot of getting the ROM to the phone. Active Sync wont connect b/c phone keeps powering on/off with its cycling issue. So the SD card must be present with the .nbh file on it. I am just in hopes that it will read it somehow. I am sooooo tired of pressing the power button for it to continue, only to have it turn right back off.
Click to expand...
Click to collapse
Certainly, but I was curious to find out if taking the SD card out had any effect on the cycling or your ability to hard reset.

Reepurr said:
Certainly, but I was curious to find out if taking the SD card out had any effect on the cycling or your ability to hard reset.
Click to expand...
Click to collapse
I wish.... It just cycles...over and over and over. No matter if the SD card is there, thrown across the room, or crushed in my hand. lol

I always flash with SIM and memory card (as I use UC almost everytime) and never had any problems with any device.
PM the board guru's about this and you will learn more in a single message than you will from this topic in a week.

Last post maybe came out little harsh. I only meant that your problem sounds so serious, that you should contact the gurus before you do something that could even make the matter worse...

Loco5150 said:
Last post maybe came out little harsh. I only meant that your problem sounds so serious, that you should contact the gurus before you do something that could even make the matter worse...
Click to expand...
Click to collapse
Hey, it's ok. I didnt take it as harsh. I have contacted cmonex. I am in hopes she can help me out. I need to put an APB out on ALL GURUS!!
Actually, that is why I posted here.

I've noticed during the flashing process it doesn't take power from USB. What is the status of the battery? It occured to me that it might be power cycling because it's going to a part of the process that only takes power from battery and there isn't enough to do what it wants to do. (+50% ?)
Just a thought ... good luck dude I hope you get it sorted.

MadBeef said:
I've noticed during the flashing process it doesn't take power from USB. What is the status of the battery? It occured to me that it might be power cycling because it's going to a part of the process that only takes power from battery and there isn't enough to do what it wants to do. (+50% ?)
Just a thought ... good luck dude I hope you get it sorted.
Click to expand...
Click to collapse
Yes, I thought of that as well. But I had it plugged in all night...but I have no idea if it charged b/c I cant see the screen that gives the battery's status. ?? So, I dont know how to get around this part of it. I KNOW for a fact that my battery was low when the phone died. I dont know how to get it charged back up to do this type of diagnostic test.....??

Maybe it's not getting a proper charge if all it's doing is looping ... I figured you wouldn't be able to get battery status after I posted haha ... But it is interesting you said the battery was low when this all happened.
Do you know anyone near you that can lend you a fully charged battery? Does it boot up immediately if you take SD card out, put battery back in and plug in USB power? If you can't get it to where the phone is off and charging with orange light then a spare battery could be worth a try.
Don't worry dude I'm sure cmonex or olipro will have far more useful advice but no harm trying in the meantime

Really KILLED my Blackstone!

Hello Mates!
Yesterday, i did some experiments with my hd...
I security unlocked it and tried to install a modified(by myself) Topaz-Radio.
Now the device is DEAD.
It stucks in the "Smart mobility"-screen.
I can NOT GOT TO BOOTLOADER anymore. When i Press VolDn + Power, it does absolutely nothing. Trying to Hard-Reset the Hd results in Vibrating three times and nothing more.
Just turning it in or soft reset, results in the "Smart Mobility Screen Stuck"
I think i have to send it to HTC and hope they fix it for free ;-)
Any other ideas anyone? I think i really made it to brick my Hd...
Greets, Tommy

Tommy0815 said:
Hello Mates!
Yesterday, i did some experiments with my hd...
I security unlocked it and tried to install a modified(by myself) Topaz-Radio.
Now the device is DEAD.
It stucks in the "Smart mobility"-screen.
I can NOT GOT TO BOOTLOADER anymore. When i Press VolDn + Power, it does absolutely nothing. Trying to Hard-Reset the Hd results in Vibrating three times and nothing more.
Just turning it in or soft reset, results in the "Smart Mobility Screen Stuck"
I think i have to send it to HTC and hope they fix it for free ;-)
Any other ideas anyone? I think i really made it to brick my Hd...
Greets, Tommy
Click to expand...
Click to collapse
bricked!! i just hope you still have warranty and was your rom from stock?
sending it back is the only solution

try harder to get into the bootloader
as long as the display still shows something, you have good chances to bring it back

jigners said:
was your rom from stock?
Click to expand...
Click to collapse
No, never Had energy Rom on the device....
@chalid:
you must be joking... even the plastic of the volDn button is gone, i don´t think i can try harder ;-)
Will give HERO a try on Tuesday...
Greetz, Tommy

Tommy0815 said:
Any other ideas anyone?
Click to expand...
Click to collapse
Did you try to flash a BLACIMG.NBH from SD?

kwbr said:
Did you try to flash a BLACIMG.NBH from SD?
Click to expand...
Click to collapse
Of course i did, but i even cant get into bootloader. the phone doesn´t even start with volDn + Power/reset.
And the PC doesnt recognize anithing, so o can´t flash via USB.
i think i killed the bootloader somehow?! ;-)
Greets, Tommy

what about BLACDIAG

Blacdiag also doesn´t work, because i cannot acces bootloader!
BUT: its possible to hardreset now(i just didn´t push the volDn hard enough before!!) when i perform a hardreset(VolUP+VOLDN+Reset or Power) i can see the bootloader for a second, the i can hardreset. hardresetting takes about 10 seconds, then after restart(volUP) its again stuck in "smart mobility"-screen.
pressing volDn+power or reset doesnt have any effect, the mobile still does NOTHING-no vibrating, no turning on-nothing...and after that, i have to take out the battery to start it again(power only or Hrardreset)
the bootloader is still here(olinex 1.56), i just can access it.
IST THERE A POSSIBILITY TO GET FROM THE HARDRESET-CONFIRMATION-SCREEN BACK TO BOOTLOADER WITHOUT A RESTART?
i ithink it hates me for getting flashed nearly three times a day
thanks to all, Tommy

If you can hard reset, right when it asks for reboot, the screen goes blank, quickly hold the volume down button only... hopefully it will get you into the bootloader...
Good luck...

you said that the plastic has gone on the vol dn button, what does it look like where the plastic used to be , is it orange plastic looking of can u just see a metal contact?

when your device hangs when booting or cannot even get into bootloader just send in your device to service center

@James62370: Already tried this. for some reason, it doesnt work-same reaction like i try to (volDn+power). it just doesnt start up, the screen keeps black.
@sgilesuk: cant see orange plastic, i think it is the copper of the contact, look at the, very bad, pic
@technician-2s i´m afraid, that i will have to do this, but i thimk they will not fix it for free :-(
thanks to all again

Have you tried to return device to orginal stock rom, i.e. rom which was on device when you bought it.
You don't need to be in bootloader or have phone sync'ed to flash this rom. It doesn't even need to say 'usb' in bootloader. Only works with original rom though

yes also tried original rom, the problem is, that my computer doesn´t recognize the device.
thx, tommy

Tommy0815 said:
yes also tried original rom, the problem is, that my computer doesn´t recognize the device.
thx, tommy
Click to expand...
Click to collapse
hmm, what about usb drivers, have you tried updating them to see if your device is then recognized?

Tommy0815 said:
Hello Mates!
Yesterday, i did some experiments with my hd...
I security unlocked it and tried to install a modified(by myself) Topaz-Radio.
Now the device is DEAD.
It stucks in the "Smart mobility"-screen.
I can NOT GOT TO BOOTLOADER anymore. When i Press VolDn + Power, it does absolutely nothing. Trying to Hard-Reset the Hd results in Vibrating three times and nothing more.
Just turning it in or soft reset, results in the "Smart Mobility Screen Stuck"
I think i have to send it to HTC and hope they fix it for free ;-)
Any other ideas anyone? I think i really made it to brick my Hd...
Greets, Tommy
Click to expand...
Click to collapse
Lesson learned I guess!
Anyhow look for "mtty" tool! that may get you to flash again.
good luck!

Had the same problem yesterday.
Smart Mobility apperead and then nothing happened and the logo turned into bright blue and nothing starts.
I took of SIM-Card and Storage Card tried to get into bootloader but nothing happened.
After 10 times trying to get into bootloader my Blackstone followede my instructions
Now is working maybe could help you.

Tommy0815 said:
@James62370: Already tried this. for some reason, it doesnt work-same reaction like i try to (volDn+power). it just doesnt start up, the screen keeps black.
@sgilesuk: cant see orange plastic, i think it is the copper of the contact, look at the, very bad, pic
@technician-2s i´m afraid, that i will have to do this, but i thimk they will not fix it for free :-(
thanks to all again
Click to expand...
Click to collapse
i doubt the phone is unfixable had mine in some bad states before so fingers crossed everything works for you
ok with how you have it at the moment you have to be really specific with pressing the Vol down button make sure you press in the centre where the black dot is, you should be able to feel the difference between bein pressed and not pressed, should still feel like a button.
My button is one step worse then yours i dont even have the orange bit there for the button, just the metal contact underneath and i can still get to bootloader . just have to use a bit of chewing gum wrapper to make the contact on the volume button

someone always makes a bad mistake.
Do NOT hold the power key for long, just one single press.

to all:
many, many thanks for your hints and tips. unfortunatetly none of them worked, because i can´t acces bootloader(tried nearly 200 times). also my pc doesn´t recognize the device(win7 or XP), tried lots of cables and alternative drivers.
now i´m using my girlfriends hero and get my hd to repair-center, hope it will not get too expensive.
@bulldog: lesson learned? I will do it again and again and...before my first WM-phone(trinity), i killed several nokias and siemens-phones
next time i will be more careful and listen to warnings of the pros --> lesson learned