Hello Mates!
Yesterday, i did some experiments with my hd...
I security unlocked it and tried to install a modified(by myself) Topaz-Radio.
Now the device is DEAD.
It stucks in the "Smart mobility"-screen.
I can NOT GOT TO BOOTLOADER anymore. When i Press VolDn + Power, it does absolutely nothing. Trying to Hard-Reset the Hd results in Vibrating three times and nothing more.
Just turning it in or soft reset, results in the "Smart Mobility Screen Stuck"
I think i have to send it to HTC and hope they fix it for free ;-)
Any other ideas anyone? I think i really made it to brick my Hd...
Greets, Tommy
Tommy0815 said:
Hello Mates!
Yesterday, i did some experiments with my hd...
I security unlocked it and tried to install a modified(by myself) Topaz-Radio.
Now the device is DEAD.
It stucks in the "Smart mobility"-screen.
I can NOT GOT TO BOOTLOADER anymore. When i Press VolDn + Power, it does absolutely nothing. Trying to Hard-Reset the Hd results in Vibrating three times and nothing more.
Just turning it in or soft reset, results in the "Smart Mobility Screen Stuck"
I think i have to send it to HTC and hope they fix it for free ;-)
Any other ideas anyone? I think i really made it to brick my Hd...
Greets, Tommy
Click to expand...
Click to collapse
bricked!! i just hope you still have warranty and was your rom from stock?
sending it back is the only solution
try harder to get into the bootloader
as long as the display still shows something, you have good chances to bring it back
jigners said:
was your rom from stock?
Click to expand...
Click to collapse
No, never Had energy Rom on the device....
@chalid:
you must be joking... even the plastic of the volDn button is gone, i don´t think i can try harder ;-)
Will give HERO a try on Tuesday...
Greetz, Tommy
Tommy0815 said:
Any other ideas anyone?
Click to expand...
Click to collapse
Did you try to flash a BLACIMG.NBH from SD?
kwbr said:
Did you try to flash a BLACIMG.NBH from SD?
Click to expand...
Click to collapse
Of course i did, but i even cant get into bootloader. the phone doesn´t even start with volDn + Power/reset.
And the PC doesnt recognize anithing, so o can´t flash via USB.
i think i killed the bootloader somehow?! ;-)
Greets, Tommy
what about BLACDIAG
Blacdiag also doesn´t work, because i cannot acces bootloader!
BUT: its possible to hardreset now(i just didn´t push the volDn hard enough before!!) when i perform a hardreset(VolUP+VOLDN+Reset or Power) i can see the bootloader for a second, the i can hardreset. hardresetting takes about 10 seconds, then after restart(volUP) its again stuck in "smart mobility"-screen.
pressing volDn+power or reset doesnt have any effect, the mobile still does NOTHING-no vibrating, no turning on-nothing...and after that, i have to take out the battery to start it again(power only or Hrardreset)
the bootloader is still here(olinex 1.56), i just can access it.
IST THERE A POSSIBILITY TO GET FROM THE HARDRESET-CONFIRMATION-SCREEN BACK TO BOOTLOADER WITHOUT A RESTART?
i ithink it hates me for getting flashed nearly three times a day
thanks to all, Tommy
If you can hard reset, right when it asks for reboot, the screen goes blank, quickly hold the volume down button only... hopefully it will get you into the bootloader...
Good luck...
you said that the plastic has gone on the vol dn button, what does it look like where the plastic used to be , is it orange plastic looking of can u just see a metal contact?
when your device hangs when booting or cannot even get into bootloader just send in your device to service center
@James62370: Already tried this. for some reason, it doesnt work-same reaction like i try to (volDn+power). it just doesnt start up, the screen keeps black.
@sgilesuk: cant see orange plastic, i think it is the copper of the contact, look at the, very bad, pic
@technician-2s i´m afraid, that i will have to do this, but i thimk they will not fix it for free :-(
thanks to all again
Have you tried to return device to orginal stock rom, i.e. rom which was on device when you bought it.
You don't need to be in bootloader or have phone sync'ed to flash this rom. It doesn't even need to say 'usb' in bootloader. Only works with original rom though
yes also tried original rom, the problem is, that my computer doesn´t recognize the device.
thx, tommy
Tommy0815 said:
yes also tried original rom, the problem is, that my computer doesn´t recognize the device.
thx, tommy
Click to expand...
Click to collapse
hmm, what about usb drivers, have you tried updating them to see if your device is then recognized?
Tommy0815 said:
Hello Mates!
Yesterday, i did some experiments with my hd...
I security unlocked it and tried to install a modified(by myself) Topaz-Radio.
Now the device is DEAD.
It stucks in the "Smart mobility"-screen.
I can NOT GOT TO BOOTLOADER anymore. When i Press VolDn + Power, it does absolutely nothing. Trying to Hard-Reset the Hd results in Vibrating three times and nothing more.
Just turning it in or soft reset, results in the "Smart Mobility Screen Stuck"
I think i have to send it to HTC and hope they fix it for free ;-)
Any other ideas anyone? I think i really made it to brick my Hd...
Greets, Tommy
Click to expand...
Click to collapse
Lesson learned I guess!
Anyhow look for "mtty" tool! that may get you to flash again.
good luck!
Had the same problem yesterday.
Smart Mobility apperead and then nothing happened and the logo turned into bright blue and nothing starts.
I took of SIM-Card and Storage Card tried to get into bootloader but nothing happened.
After 10 times trying to get into bootloader my Blackstone followede my instructions
Now is working maybe could help you.
Tommy0815 said:
@James62370: Already tried this. for some reason, it doesnt work-same reaction like i try to (volDn+power). it just doesnt start up, the screen keeps black.
@sgilesuk: cant see orange plastic, i think it is the copper of the contact, look at the, very bad, pic
@technician-2s i´m afraid, that i will have to do this, but i thimk they will not fix it for free :-(
thanks to all again
Click to expand...
Click to collapse
i doubt the phone is unfixable had mine in some bad states before so fingers crossed everything works for you
ok with how you have it at the moment you have to be really specific with pressing the Vol down button make sure you press in the centre where the black dot is, you should be able to feel the difference between bein pressed and not pressed, should still feel like a button.
My button is one step worse then yours i dont even have the orange bit there for the button, just the metal contact underneath and i can still get to bootloader . just have to use a bit of chewing gum wrapper to make the contact on the volume button
someone always makes a bad mistake.
Do NOT hold the power key for long, just one single press.
to all:
many, many thanks for your hints and tips. unfortunatetly none of them worked, because i can´t acces bootloader(tried nearly 200 times). also my pc doesn´t recognize the device(win7 or XP), tried lots of cables and alternative drivers.
now i´m using my girlfriends hero and get my hd to repair-center, hope it will not get too expensive.
@bulldog: lesson learned? I will do it again and again and...before my first WM-phone(trinity), i killed several nokias and siemens-phones
next time i will be more careful and listen to warnings of the pros --> lesson learned
Related
hello all, was just wondering if anyone could help me here, iv turned on my phone this morning to find it comes to a serial screen, and im not even able to put any serial in? iv not flashed it with a new rom or anything like that, never even touched the software side, no modifications have been made, so i honestly have no idea how this happened?
i was thinking maybe i should download the original rom for the phone and just re-install that? but im with orange and have been unable to find the original rom, so any help would be much appreciated,
many thanks
Dan
Have you downloaded ANYTHING to the pda at all? Sim/cid unlocker? Files from PC perhaps? If you havent I would try Hard Reset first.
nope nothing at all =/ iv tried a hard reset bu it wont leave the serial sceen =/ it some times flashes "no image file" aswell if thats any help?
Dan
What procedure are you going through for hard reset?
i was using the - hold down the two soft keys and then use the styles to press the reset buttom, remove the stylus, keepin the keys depressed and waitin 4 instructions.
iv just turned the phone on now after it bein off for an hour, and it works again? =S
Great news. I was going to suggest you remove the battery, then do hard reset but there ya go!
ah, that could have been wot fixed it then, because i left the battery removed =) anyway, many thanks mate =)
Dan
Hi. Ok, first of all I have done some research on the forum, but I haven't really found any answer for my problem.
I have a Htc touch diamond. And I installed a rom from the forum, i beleive it was the "shine"-rom. However now i gets weird....
The day after, everything was normal, and then all of a sudden my backlight gets really dim. Ok, could be a small bug i thought.
A few hours later it got darker and it was hard to see what was on the display.
And later on the evening it got almost all black. I couldn't quite tell what was what on the display.
The next day, and still, its totally dead. There is no light in the "ring" when i plug in the charger, and i cant get it to show any life.
I have tried everything, left it in the charger for a whole day, swapped battery, reset, hard reset, super hard reset. left it without battery for a day. Nothing.
Help me out. Any ideas?
Ps. There is no warranty on the phone.
Thanks!!
Wow... have not seen this before...
Even now, are you unable to even switch on your diamond? If you can't, don't see any way to revive it. If you can, try to flash another ROM and see if it improves...
How?
How can I flash it again, if I cant even turn it on? hmmm....
Help
Nothing? No idea?
I opened it up, but that didn't shed any major light on the situation....
//
Skeptisk said:
How can I flash it again, if I cant even turn it on? hmmm....
Click to expand...
Click to collapse
Can you get it into bootloader? {Hold Vol. down button while pressing power}
If it will go into bootloader, you can flash from there
Humblehippie said:
Can you get it into bootloader? {Hold Vol. down button while pressing power}
If it will go into bootloader, you can flash from there
Click to expand...
Click to collapse
Nope. He can't even get it to turn on. Don't think it'll be able to boot into bootloader...
otacon said:
Nope. He can't even get it to turn on. Don't think it'll be able to boot into bootloader...
Click to expand...
Click to collapse
It just seems odd that bootloader won't even load. If it was something that damaged the OS then the BL should at least fire up. But, I just re-read everything again & see that there is no mention of Hard-SPL, so maybe it damaged the Boot sector as well.
If he didn't Hard_SPL then: This is a great example as to why you should always Hard-SPL before flashing anything.
If he did Hard_SPL: Then this is one for the medical journals {a disease that no-one's heard of & it's a killer}
Strange
Hi again.
I did actually Hard-Spl. And i have tried different ROM's earlier and I never had any problems.
I dont have a clue what to do, and without any warranty im basicly screwed.
I was thinkin, maybe I could get som spare part? Seeing how the "ring" doesn't even light up when I plug in the charger??
//
When my "ring" didn't light up I had to send the phone back to HTC and they changed the motherboard. Phone wasn't charging or turning on at all.
Ok, so I have encountered something NONE of us EVER want to encounter. My phone has died. It will NOT boot up on battery power and is now cycling in the tri-color screen over and over again. It does this when plugged into USB port and wall outlet. I have the HTC Euro stock ROM on the SD card in the phone, trying to get it to reflash. It gets to the screen : "loading" and "checking" ....but then boots down again and cycles all over again.
I flashed the NRG 10/11 Photon ROM. I have the first HRDSPL from Olinex. My phone is the Euro version, unlocked, unbranded. I use TMobile in the US. .
Please, there has GOT to be someone out there that can help me. You guys are really sharp!! Please ....I need my phone!
I cannot even do a hard reset either. I push the power, send and end button all at the same time. I get no response.
What are my options here? Thanks in advance.
cabranscom said:
Ok, so I have encountered something NONE of us EVER want to encounter. My phone has died. It will NOT boot up on battery power and is now cycling in the tri-color screen over and over again. It does this when plugged into USB port and wall outlet. I have the HTC Euro stock ROM on the SD card in the phone, trying to get it to reflash. It gets to the screen : "loading" and "checking" ....but then boots down again and cycles all over again.
I flashed the NRG 10/11 Photon ROM. I have the first HRDSPL from Olinex. My phone is the Euro version, unlocked, unbranded. I use TMobile in the US.
Please, there has GOT to be someone out there that can help me. You guys are really sharp!! Please ....I need my phone!
I cannot even do a hard reset either. I push the power, send and end button all at the same time. I get no response.
What are my options here? Thanks in advance.
Click to expand...
Click to collapse
1: So if when you pull out your battery it goes off. And on reinsert, when you try to turn on or hardreset ie: hold the TALK/SEND, END and POWER buttons until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
At that point you release the buttons and press Volume up to perform.
It doesnt do anything?
2: As soon you do the AC adapter in or USB power, it starts cycling on his own? If not, try to hardreset then.
3: If you wait like 30 minutes, with cycling on USB on PC, can it hardreset out hisself? Ive readed another guy who had issues and somehow it fixed itself.
cabranscom said:
Ok, so I have encountered something NONE of us EVER want to encounter. My phone has died. It will NOT boot up on battery power and is now cycling in the tri-color screen over and over again. It does this when plugged into USB port and wall outlet. I have the HTC Euro stock ROM on the SD card in the phone, trying to get it to reflash. It gets to the screen : "loading" and "checking" ....but then boots down again and cycles all over again.
I flashed the NRG 10/11 Photon ROM. I have the first HRDSPL from Olinex. My phone is the Euro version, unlocked, unbranded. I use TMobile in the US.
Please, there has GOT to be someone out there that can help me. You guys are really sharp!! Please ....I need my phone!
I cannot even do a hard reset either. I push the power, send and end button all at the same time. I get no response.
What are my options here? Thanks in advance.
Click to expand...
Click to collapse
sorry to hear that, have you tried taking the battery out for few minutes & re-insert it in then connect your phone to PC to see if it let you re-flash again?
good luck m8
People are reporting the same thing after doing slide to reboot with NRG's 10/11 Photon ROM... Go check that topic, you are not alone.
Loco5150 said:
People are reporting the same thing after doing slide to reboot with NRG's 10/11 Photon ROM... Go check that topic, you are not alone.
Click to expand...
Click to collapse
He is one of those who reported that Really hope somebody van explain what can go wrong after a softreset.
pnxsinned said:
1: So if when you pull out your battery it goes off. And on reinsert, when you try to turn on or hardreset ie: hold the TALK/SEND, END and POWER buttons until you see this message on the screen.
"This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel."
At that point you release the buttons and press Volume up to perform.
It doesnt do anything? I can never get to that point. It does nothing. I see nothing on the screen. It just keeps cycling.
2: As soon you do the AC adapter in or USB power, it starts cycling on his own? If not, try to hardreset then. Again, I cannot hard reset.
3: If you wait like 30 minutes, with cycling on USB on PC, can it hardreset out hisself? Ive readed another guy who had issues and somehow it fixed itself.
Click to expand...
Click to collapse
I waited all night long for it to do that. No luck.
Now I get to the point where I see where it recognizes my .nbh file and has a splash screen. BUT......it will not go any further past that now. I press the power button to continue, but it just cycles again and the whole process starts over. I see a reallllllllllllly quick sliver of the update bar, but it disappears fast b/c of the recycling process.
Please dont give up on me. Thanks.
Loco5150 said:
People are reporting the same thing after doing slide to reboot with NRG's 10/11 Photon ROM... Go check that topic, you are not alone.
Click to expand...
Click to collapse
pnxsinned said:
He is one of those who reported that Really hope somebody van explain what can go wrong after a softreset.
Click to expand...
Click to collapse
um, yeah, that would be me in that disasterous situation.
I saw in another thread that you have tried removing your SIM card with no success. Have you tried without the SD card as well?
Also, does pressing the hardware reset button under the battery cover do anything?
Reepurr said:
I saw in another thread that you have tried removing your SIM card with no success. Have you tried without the SD card as well?
Click to expand...
Click to collapse
I do not have the SIM card in there. I never have flashed with a SIM card in there. Always read to take that out when you do that.
The SD has to be in there b/c it is the only thing that has a shot of getting the ROM to the phone. Active Sync wont connect b/c phone keeps powering on/off with its cycling issue. So the SD card must be present with the .nbh file on it. I am just in hopes that it will read it somehow. I am sooooo tired of pressing the power button for it to continue, only to have it turn right back off.
ps, reset button does nothing either.
ugh.
Aaah sorry, didnt remeber who was talking about it... There were few cases like that if I remeber correctly...
Ive been here since TyTN, does it make 4yrs or something? I have never heard anything like this.. Because the phone goes to the 3 color screen mode, Im pretty sure someone with skills will come up with a solution, but it might take time though...
Loco5150 said:
Aaah sorry, didnt remeber who was talking about it... There were few cases like that if I remeber correctly...
Ive been here since TyTN, does it make 4yrs or something? I have never heard anything like this.. Because the phone goes to the 3 color screen mode, Im pretty sure someone with skills will come up with a solution, but it might take time though...
Click to expand...
Click to collapse
So the 3 color screen mode. Exactly what is its purpose and why does it keep cycling over and over and over?
Its the bootloader, you should PM Olinex...
cabranscom said:
The SD has to be in there b/c it is the only thing that has a shot of getting the ROM to the phone. Active Sync wont connect b/c phone keeps powering on/off with its cycling issue. So the SD card must be present with the .nbh file on it. I am just in hopes that it will read it somehow. I am sooooo tired of pressing the power button for it to continue, only to have it turn right back off.
Click to expand...
Click to collapse
Certainly, but I was curious to find out if taking the SD card out had any effect on the cycling or your ability to hard reset.
Reepurr said:
Certainly, but I was curious to find out if taking the SD card out had any effect on the cycling or your ability to hard reset.
Click to expand...
Click to collapse
I wish.... It just cycles...over and over and over. No matter if the SD card is there, thrown across the room, or crushed in my hand. lol
I always flash with SIM and memory card (as I use UC almost everytime) and never had any problems with any device.
PM the board guru's about this and you will learn more in a single message than you will from this topic in a week.
Last post maybe came out little harsh. I only meant that your problem sounds so serious, that you should contact the gurus before you do something that could even make the matter worse...
Loco5150 said:
Last post maybe came out little harsh. I only meant that your problem sounds so serious, that you should contact the gurus before you do something that could even make the matter worse...
Click to expand...
Click to collapse
Hey, it's ok. I didnt take it as harsh. I have contacted cmonex. I am in hopes she can help me out. I need to put an APB out on ALL GURUS!!
Actually, that is why I posted here.
I've noticed during the flashing process it doesn't take power from USB. What is the status of the battery? It occured to me that it might be power cycling because it's going to a part of the process that only takes power from battery and there isn't enough to do what it wants to do. (+50% ?)
Just a thought ... good luck dude I hope you get it sorted.
MadBeef said:
I've noticed during the flashing process it doesn't take power from USB. What is the status of the battery? It occured to me that it might be power cycling because it's going to a part of the process that only takes power from battery and there isn't enough to do what it wants to do. (+50% ?)
Just a thought ... good luck dude I hope you get it sorted.
Click to expand...
Click to collapse
Yes, I thought of that as well. But I had it plugged in all night...but I have no idea if it charged b/c I cant see the screen that gives the battery's status. ?? So, I dont know how to get around this part of it. I KNOW for a fact that my battery was low when the phone died. I dont know how to get it charged back up to do this type of diagnostic test.....??
Maybe it's not getting a proper charge if all it's doing is looping ... I figured you wouldn't be able to get battery status after I posted haha ... But it is interesting you said the battery was low when this all happened.
Do you know anyone near you that can lend you a fully charged battery? Does it boot up immediately if you take SD card out, put battery back in and plug in USB power? If you can't get it to where the phone is off and charging with orange light then a spare battery could be worth a try.
Don't worry dude I'm sure cmonex or olipro will have far more useful advice but no harm trying in the meantime
hi guys
got my htc diamond 2 yesterday. it's nto branded and it's not locked. it has a 6.1 windows on it. tried to do a hard reset but it did not work :| (took sim out and battery)
anyways...
as you imagine, I wanted to instal a nice ROM, so dowloaded 6.5 official ROM
when I try to instal it on my phone, after I press UPDATE, the phone goes on standby, active sync disconnects and the process of updating the ROM doesn't even start.
then I downloaded hard-spl, tried to install it but is says that the device is not connected to PC - although it is connected via active sync...
any ideas on how can I sort this out... your help is much appreciated!
forgot to mention some details...
when I try to instal a ROM, I get Error 260 (No connection)
I tried restarting my laptop, the phone and even tried on a different laptop - nothing works...
about the hard spl, I also instaled the required cab but nothing...
just hard reset manual...
hold both volumes and then hold power button
keep holding down until press "up volume" message appear to erase
after hard reset, use 1.83 HardSPL and after use whatever rom you wish
On e.g. Windows 7 you need to install another driver when TD2 is in bootloader mode (can easily be downloaded using winupdate while in bootloader mode).
BTW hard reset means pressing vol up AND vol down AND once reset button (with stylus).
HTC Touch Diamond2 SD Card ROM flashing
Look here: SD Card ROM flashing
Or Let me Google that for u.
DalvuS said:
just hard reset manual...
hold both volumes and then hold power button
keep holding down until press "up volume" message appear to erase
after hard reset, use 1.83 HardSPL and after use whatever rom you wish
Click to expand...
Click to collapse
thanks for your answer... I have tried doing the hard reset in all the ways, but it is not working.... i have tried with power button and reset button, while volume up and volute down were both pressed.. it does not work...
i've put a sd card in it and tried to run rom from there ... the way it's done is keeping volume down pressed and then turn the phone on.... the thing is that I don't get the tri-colour screen... it boots normaly and loads windows...
this is amazing... nothing seems to work on it...
Hard reset
Device must be turned off:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
hmmm
@S-Line - i have tried on windows xp and vista... and hard reset does not work on my phone :|
@Tom Lenferink thanks for the idea, i've got a card, formated fat32, put a rom on it with name 'TOPAIMG.nbh' and tried to do volume down and turn on the phone... it loads normaly, doesn't go on the coloured screen...
any more ideas guys? I can see 2 things that can be wrong
1) is not hard slp yet
2) buttons don't seem to work, btu they work in windows mobile
fake fake fake
don't bother guys, i just realised that the phone I got is a fine fake after diamond 2.... sorry for the trouble and people who want to buy diamond2, be very carefull.... it looks identical, windows is the same etc
andreti said:
don't bother guys, i just realised that the phone I got is a fine fake after diamond 2.... sorry for the trouble and people who want to buy diamond2, be very carefull.... it looks identical, windows is the same etc
Click to expand...
Click to collapse
Interesting, it means that they even copied the serial number if you could download the ROM from HTC website.
Could you pls post pictures of your phone from front and back side ?
How do you know it is not real TD2 (I mean, what is the difference ?)
Post pictures and I'll do a comparison so others know what to look out for. They're very rarely identical.
Andreti ???
hi guys, I just randomly found this thread. been looking for a diamond2 from second hand. bought one a week ago and had exactly the same problem with flashing. after some time i realised that it was a fake clone ugly piece of junk.
so you asked about the differences, here they are:
- the one i had, had no front camera.
- overall build quality was weird, you could tell just by opening it and removing the batt. all the inside parts were somehow covered/sealed with a ducktape - really not htc style
- terrible screeen - terrible colors, contrast, brightness (my good old s710 has much better display), not calibrated - you had to push 2mm below the actual button, slow cpu (all i know it wast really fast, dont know about the speed of the original, never held it)
- no g sensor, no gps module. not sure 100% but it had a shortcut for external gps and you had to push a button to rotate the home screen (i guess both of these kind of imply missing these features)
- when i tried to download the official fw, imei wasnt recognised - which i think, is the best way to find out. after downloading fw from other sources, i got the 260 error.
peace and be careful
Most clones have a 3.5mp camera and 128mb RAM
hard reset
Just a quick note, I tried to carry out a hard reset as in the manual. I could not get it to work - until I found that if I removed battery, refitted it, then a hard reset worked every time. Read my new post to see why I had to do a hard reset....!!!!!
Hi guys..need help here..my tytn here can't start and stuck in a white screen and seems jammed for hours...there is no buttons active except power and reset button is wrking..when i connect the device to the pc,it connects normally..but i can't see anything in the screen..it's blank..help me please...
p/s : i never chnged the ROMs..it suddenly happened..
thanks in advnce..
Get into bootloader and flash stock ROM, know you said can't use buttons but maybe camera and reset is
May be blind doing so but worth a shot.
stylez said:
Get into bootloader and flash stock ROM, know you said can't use buttons but maybe camera and reset is
May be blind doing so but worth a shot.
Click to expand...
Click to collapse
thanks for your advice stylez...but i've tried all that...couldn't see anything working..i searched on follow the steps on the wiki,but only white screen appears..still blank...any other suggestions?thnks...
I have the same problem, unable to access the bootloader or flash another ROM. Is there a means to flash a new bootloader onto it?
brat1475 said:
I have the same problem, unable to access the bootloader or flash another ROM. Is there a means to flash a new bootloader onto it?
Click to expand...
Click to collapse
is there any other ways guys??help please...i'm bored without using my tytn..
I've had a problem lately too where my screen will go white, while apps still seem to continue running.
Sometimes, just turning off the screen, then sliding it open will fix it. Other times I have to pull the battery.
As of yesterday, I can also no longer read any memory card in the phone. I think its time for a new phone. I just passed that 2 year expiration date.
man...still no answer yet..i have no idea what is going on with this phne..warranty also expired..any help guys???please....
smcb said:
Sometimes, just turning off the screen, then sliding it open will fix it. Other times I have to pull the battery.
QUOTE]
I think the problem are the 2 screen connectors. You must open the screen part of the cover and tighten the conectors.
Good luck.
Click to expand...
Click to collapse