Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks
GLO said:
Hi,
In the past couple of weeks, i have had to perform a number of soft resets as my Kaiser was hanging. I didnt think much of it, putting it down to probably low memory.
However today it hung again whilst in IE and so i did a soft reset. Then it would boot only to the 'smart mobility' screen showing
R 1.27.12.11
G 22.45.88.07H
D 1.81.00.00
I started to get worried as it would not proceed past that screen. I tried several more soft resets and then decided to remove my 2gb microSD card, which helped it boot to WM6.
It would not show that the phone was connected to the network although the wifi was connected ok. I tried disabling the phone in the comm manager but that made no difference.
I then removed the SIM and it recognised that it was missing and shut down in 10 seconds.
I re-insterted the sim, but it still saw no network.
Then a number of other errors came up, such as quickdial.exe is missing, as well as a few others.
When i inserted the MicroSD back in it started to load and most recently 'should we disable phone alarm' at next start. Which i could not click as it had hung again.
Now, with or without the MicroSD or Sim it is back hanging at the 'smart mobility screen' again.
What should i do?
Thanks
Click to expand...
Click to collapse
First thing in such cases is a hardreset.
Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups.
Yep, just doing that as you posted.
I really wanted to avoid doing that though.
Well, its done now, and now to re-install everything.
What do you thing was the fault? or cause for the hang ups
Click to expand...
Click to collapse
Some software or setting you've done, or it was simply Murphys Law:
When the mistake could happen, it will happen
Should i upgrade the radio at this point?
Its like with PCs, u need to reinstall your operation system from time to time.
Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers
CLF said:
Hei all,
My Kaiser just the other night did something very strange and has not been able to fix it.
I turned it on, it booted right through then just like a stuck button it started to cycle through most programs starting and closing. The search engine starts up then it starts to write mmmmn.nmnm.mnnm. eee. and then stops .... ok this is just a few of the things it does.
Ok first I have soft booted and the same thing ... then I tried a hard reset ... guess what it will not hard reset. Yes two soft keys with the soft reset pushed in ..... but nothing!
Is there any other way to do a hard reset. I have no clue what is happening??
Thanks for the help!
Chris
Well guess what ..... after two days of trying to hard reset it finally worked .... perseverance ..... I guess fat fingers
Click to expand...
Click to collapse
Hi:
You can go into start/settings/system/clear storage. That will hard reset your device.
EDIT: Oops, sorry I missed your last line. Please disregard my post
Related
Hello everyone,I have the Vanilla ROM. 1.4 I believe, what has happened is that I had a friend look at my blue angle because he was considering getting one himself, he went to my Mobile Shell application from SPB, activated the portrait view (took time to load and he did not know that) so he decided to press is like a lot!!
So it tried to do landscape/portrait mode a lot! so we rebooted the thing. Then another problem came that the phone locked itself, and when trying to unlock the phone nothing worked, (press the "*" again to unlock the phone) that did not work at all.
After spending a lot of time I fixed that, then the screen alignment/navigating with the D-Pad was all screwed up, I managed to get to the screen alignment program and fixed that. Now I have this serious problem.
The phone cannot connect to my service provider (Cingular). And here is the funny part... Hard Reset does not at all!! very strange. Using a backup file I had useing SPB backup that also did not work.
(also I tried draining the backup battery and that did not work as well, guess the volatile memory thing in WM5 worked).
Please someone help me in this problem as I cannot use my phone! :'(
Fixed
Sorry about the post, I have fixed it by doing
http://forum.xda-developers.com/showpost.php?p=1164331
worked perfectly, reset the phone easily and now restoreing with a backup.
But if anyone can please tell me why Power/Reset did not do a hard reboot?
Hard reset is not enough
I've flushed my phone about 50 times during last two weeks.
I think, that there are some cases, that same data or state of "things" can survive flashing and hard reset. At least using helmi_c or my ROM.
Simply test: flash any helmi rom, turn on wifi and/or set button lock to wake up only using power button and perform hard reset. State of lock button is not changed, wifi tries to connect to any access point. Even reflashing with the same rom is not enough.
I'm guessing only: I think, that there is small bug - reset procedure checks validity of any particular block (or blocks) of data and skips initialization of same data it if is looks valid.
Maybe you have got the same.
This is the second time in two days.
After upgrading my Diamond to official ROM 1.93 ITA it happened for the second time (so far) that it crashed while it was in standby. I couldn't receive calls/sms nor turn it on pushing the power button. I had to remove battery, wait a few seconds and then re-insert it soft-resetting the device.
Did anyone experienced the same problem ?
I've never had such a problem on the 1.93 WWE ROM.
Work Ok for me no problem so far, did you make a hard reset after you flash the rom? I allways make that after a flash even twice
I installed the .93 official ITA rom from HTC site three days agò and no problem so far.
I have had also one 'hang' when the device came out of stand-by. The screen was messed up and the device hang completely. I did it a soft reset and it worked again.
Take out Sim Card and hard reset.
help foor ?
where would i find my sim card and how would i remove it? I have the
Sprint HTC Diamond
My diamond keeps resetting itself to the splashscreen page and goes no further. I try to hard reset and it will just get me to the same splash screen as I got before and it won't go any further into the hard reset.
I think that if i can get it to do the hard reset, that i would be ok and be able to get rid of the ROM that seemed to cause this situation. I had last put SwiftBL-WWE-Diamond-v7-0-Full-16MbPP on my unit and this started happening right after it was done.
I am open to any suggestions that any of you have for me. I haven't been without a phone or my pda for many years and don't know how long i can go without before happens.
Dorothy
ezzie said:
where would i find my sim card and how would i remove it? I have the
Sprint HTC Diamond
My diamond keeps resetting itself to the splashscreen page and goes no further. I try to hard reset and it will just get me to the same splash screen as I got before and it won't go any further into the hard reset.
I think that if i can get it to do the hard reset, that i would be ok and be able to get rid of the ROM that seemed to cause this situation. I had last put SwiftBL-WWE-Diamond-v7-0-Full-16MbPP on my unit and this started happening right after it was done.
I am open to any suggestions that any of you have for me. I haven't been without a phone or my pda for many years and don't know how long i can go without before happens.
PS I don't think this is the right thread to ask your question, but w/e...
Dorothy
Click to expand...
Click to collapse
The problem with your phone is that you used a rom that is intended for the GSM version Diamond, and the Sprint one you got is a CDMA, so there's no SIM card in the Diamond you got. You should just try to get into bootloader and go from there...
sorry, wasn't able to find a thread that addressed this. I can't get into bootloader. any idea's how to get into it other than the vol down/reset?
Nevermind. Sprint is sending me a new one. they said it was looped and nothing can be done.
God! this is too much!! I've had this damn problem pretty much fromt the start (since I bought x1). Sometimes (in fact loads of times) x1 gets stuck and I'll have to soft reset it. When I do, it gets stuck when it says Windows mobile 6.1. And nothing else happens and then i'll have to soft reset it again!! Today it happened again and I had to soft reset it nearly ten times before It got normally switched on!! What should I do??! Plleeeeeeeeaaaase help. I'm getting fed up with this.
I also did a software update using SE. followed by a hard reset. Problem persists.
Flash another ROM? Sounds like some system file was corrupted to me.
That still happens to me - 6.1 or 6.5 ROMs made no difference. Though I have noticed now that the less you install on the phone, the less chance there is for the need to soft reset over and over again. I also noticed that if I turn wifi off before I turn off the phone, it's easier booting back up.
does this happen the same with the memory card removed?
Happened to me. Hard-Reset fixed the problem for me.
I already did a hard reset: Wouldn't do ant good. I haven't tried with mem card removed.
BTW it happened again but this time It came good at the 2nd attempt.
koffeemachine said:
does this happen the same with the memory card removed?
Click to expand...
Click to collapse
I've never tried. Do you get an error when you use it as drive mode? I sometimes get an error saying that the card is corrupted.
Corrupted memory cards might cause issues too, so try another card or remove the card, as another poster suggested.
I'm sorry to have to ask, but I'm at a loss at this point, I've fixed this problem 3 times, and it keeps coming back.
AT&T tilt, unlocked, Solace 3.1 ROM
HardSPL 2.97
The phone works perfectly fine, except when I have to restart it, then it gets locked in the Bootscreen....and becomes very difficult to get it out. I try a soft reset, hard reset, nothing seems to work.
When this originally happened, I reloaded Solace 3.1 only to have it continue to be locked in the boot mode. Finally I I noticed the camera button and the power button appear to get locked into the on position, so i would manually create space between the button, and the actual activating button within the phone. It has worked 3/200 times I have had this problem. Overall I solved it by never restarting or resetting the phone, but eventually even with a ram cleaning program it becomes a problem.
If I'm thinking of the wrong solution let me know, it now appears to be stuck again in the on position for the power button....I basically ripped off the outer camera button, and now have to manually press the small one within the phone to activate it manually. I still can't get it off the bootloader, and its quite a frustrating problem.
Again, everything software wise works like a charm, I would have to think it isn't software related. Any ideas? I'm at a loss at this point, and using my phone from 2 years ago as a result.
Have U tried using another ROM besides the Solace ?
Hi guys,
I've got a bit of a problem with my friends X1...
A while ago I updated my X1 to WM6.5 and it works perfect...
But last week my friend asked me to update her phone as well, so I did
Now here's the problem:
After updating, the phone got stuck on loading, it didn't even get past the SE screen...
Turned it on and off for a couple of times, soft reset, hard reset, nothing worked...
I was still able to get the phone in the tri-colour screen, so I did, and I installed a stripped down version of WM6.5
And it worked!
But this afternoon she called me up to say that the phone was having problems again.
She often can't turn it on, and when she can it seems as if it has lost all of its memory again, comletely blank as if you just got it out of the box... (So you have to setup your screen again, the time and date etc...)
I did it exactly as id did mine, and mine still works perfect...
What could have gone wrong?
First I put Hard-SPL on the device.
Then I used the rom update utility from christian-web.nl/sections.php?section=Xperia_rom (I used version 3.810)
And thats it!
Does somebody have any idea what could be the problem?
Thanks,
Rob
A few days back I read somewhat of the same story, about the phone hard resetting by itself. Can't recall where, but it was somewhere in the Xperia section of this forum.
Did you do a hard reset after flash? Or maybe task29 before flashing her phone?
Try the hard reset first and see if that helps.