I've been using BlackBerry Connect on my Tilt for a few weeks, and it's worked well. Then yesterday night, the Tilt suddently stopped being able to boot past the Windows Mobile screen. I did a hard reset and restored a backup, and reinstalled BlackBerry Connect. Everything seems to be working fine, EXCEPT:
Every time I receive a message when the phone is powered off, it turns on. I don't get a message, and notifications aren't set to do anything when I get a new email. It doesn't even go to Messaging if it's not there already. It just turns on. And I'm going bonkers trying to figure out how to fix it--in part because I'm not sure if this is a BB Connect problem or a Messaging one or what.
Any suggestions? I see another message from someone reporting something similar, but saying it's the new Tilt ROM--and I haven't updated my ROM, so that's not the case here. But I *did* redownload the BB Connect application, so perhaps the new version is flaky?
Related
Hi all,
Here's a strange one for you, my data connection on my phone was working fine since I've got it (since launch) but all of a sudden, over the last few days, it now can't stay alive for over a couple of hours. To be more precise, it does stay connected, but looses the ability to do anything, for example, active sync sits there "waiting for network" and opera sits there "looking for host" and I can't view anything. It works fine before then, then just suddenly stops. Anyone got any suggestions on what this could be? It's really annoying because it means that my emails suddenly don't get sent through, and I never know when it's stopped working unless I manually check.
Regards,
DragonStar
I got the exact same problem, the only thing I didn't do so far is a hard reset...
The weird thing is that it DOES WORK for lets say the weather plugin in the today screen, but IE, opera, nothing else works
I'm having this same issue with panosha's v2 rom. Weather works ok, but nothing else. I really need it for activesync, and that just comes back and tells me I have permission issues, yet when I soft reset, it works just fine.
Sounds like activesync is the culprit here. Are you using activesync when the data quits working? cause i've had lots of issues with activesync screwing up my data connection.
http://forum.xda-developers.com/showthread.php?t=360268
that is my response to how i get activesync to work and keep my computer connection separate from my phone's connection. If the problem described isn't the exact same thing i'm guessing that it something similar. i would suspect that somehow the settings in your network selection drop downs have been changed.
hope this will help in some way.
So I have had the ATT Tilt for a few months now. I love it, it does everything I need, how ever a few things are driving me insane about the phone. Please help figure these out.
btw I upgraded to WM 6.1, everything was fine for about 2 weeks and now it is acting up.
1) I know this isnt related to windows mobile upgrade, but when I send a text, is there any way to stop it from notifying me "message sent" alert?
2) This started to happen this past week and has never done it before. I have the device setup to check my att mail. Everything is fine, downloads messages, but when trying to send a message, it tells me "The message(s) could not be sent. Check that you have network coverage and your account information is correct. Then try sending again"
Like I said, everything was fine, until this past week. Never changed any settings, I have a strong 3g signal and I am connected to my home WiFi. If I disconnect from WiFi, it doesnt matter and I still get that error message.
3) When turning the screen display on, sometimes it turns on then off real quick. Its fine if I try it again and is only a fraction of a second, but when it does it 5 times a day, it gets annoying.
4) This is a big one that I cant stand. Every 10 minutes it tells me "you have such and such messages unread" notification. Granted there might be some email that is unread and I understand it, but how do I disable those notifications from popping up all the time??
One more question and it is a bit off topic. Help me understand how a ROM works. If I install a new ROM, that doesnt get rid of WM6.1 but more changes the interface of the pda right? If I change the ROM, will I still have all my normal functions of the pda? (camera, 3g, calender, etc....) Please help me understand how it works and what would be the most stable ROM.
Thanks everyone!
Sounds like someone needs to look at KaiserTweak for at least one problem.
The ROM is everything. It's windows, it's the software on it, the addons.. ALL OF IT. Of course you can add to it yourself but it's everything that you had on your phone when you turned it on after a flash. If there was no ROM at all you would just have empty memory on your phone.
I'm sure someone will have something more scientific to say but thats really all you need to know about that.
ChumleyEX said:
Sounds like someone needs to look at KaiserTweak for at least one problem.
Click to expand...
Click to collapse
I couldn't agree more.....
Here is another link for your reading pleasures......
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
bhaz413 said:
2) This started to happen this past week and has never done it before. I have the device setup to check my att mail. Everything is fine, downloads messages, but when trying to send a message, it tells me "The message(s) could not be sent. Check that you have network coverage and your account information is correct. Then try sending again"
Like I said, everything was fine, until this past week. Never changed any settings, I have a strong 3g signal and I am connected to my home WiFi. If I disconnect from WiFi, it doesnt matter and I still get that error message.
Click to expand...
Click to collapse
What are you using for your smtp server? cwmx.com? If so, that server is notoriously unreliable and has been known to be down for a couple of days. I experienced my last straw several months ago and since then, I have been using my ISP's smtp server (my ISP allows this; not all ISPs do).
Having stated that, though, on a few occasions I had solved the problem by simply deleting the account on my phone and re-setting it up. On those occasions, cwmx was fine; it was just something with my account setup on the phone. Like you, nothing was changed by me, but obviously something got corrupted/damaged somewhere.
My recommendation to you is to use your ISP's smtp server and if you are unable to do so, then try deleting and re-setting up the account on your phone.
I have the same problem with sending emails.
Its not the smtp server, it does not matter what SMTP server it was, but its WM6 itself.
The only way I know to solve it is to delete the email account, and enter everything again. Which is a nuisance because you have to type the email that you wanted to send, all over again.
this looks promising, I am giving it a try once I get home.
Do report as well if you can get it to work.
http://www.tracyandmatt.co.uk/blogs/index.php/2008/10/15/windows-mobile-smtp-fix
A few days ago I started getting this message on my diamond that says:
DataBase Update Check
It may cost you data connection fee to check if new database update for Connection Setup. Would you like to proceed?
How do I get rid of this message?
Updating?...
Not sure if this is the same thing but have you tried:
Start/settings/connections/connection setup/menu - then untick "Enable Auto Configuration"
Again, no idea but it was just a thought.
Driskol said:
Updating?...
Click to expand...
Click to collapse
Yeah, forgot to mention.
It has 2 options; Yes and No.
I choose yes, and it comes back again in 3-4 minutes.
WMguy said:
Not sure if this is the same thing but have you tried:
Start/settings/connections/connection setup/menu - then untick "Enable Auto Configuration"
Again, no idea but it was just a thought.
Click to expand...
Click to collapse
Just tried this to no avail
I have been getting the same thing for the last 3 days, since coming back from holiday abroad, and it's very annoying, I never got that before, I thought it had something to do with the fact that i'd been roaming, but i see that other people are starting to get it at about the same time, could it be a network thing?
I've got the same issue since a couple of days... it's really annoying!
Is there a solution yet?
Same Issue with automatic update
I also got this issue since a couple of days! I have already stated it here but also still no answer yet.
http://forum.xda-developers.com/showthread.php?t=402091
Any support is highly appreciated!
I had this like 12 times while driving for 2hrs and using tomtom, the message would pop up over tomtom and take several presses to get it to disappear then often dumping me back to the HTC start page forcing me to faff with menus while driving to get tomtom back up, by the end of the trip i was nearly ready to throw the phone under the next lorry that passed me on the motorway
Really pi**ed off with this one
Hi,
I have same problem and it started when I proceed connection setup application. Now when I update weather or make a phone call that same note apears database update check.....
I did try soft reset also no help.. Any solved this problem?
Same here, pops up over my TomTom while driving - really annoying!
It happens every time I make a call.
Isn't there any one who knows how to get rid off this message?
Seems like this message pops up each time you try to connect to EDGE. So anytime the weather updates this message pops up. Very annoying!
Same problem here for at least one month already...
I performed a hard reset of my phone, it seemed to be ok, but since i installed Windows Live application, and set Hotmail to check emails once an hour, it has reappeared. Really annoying thing. Looks like everyone has been affected by it and it has only been happening for a few weeks. Something must have happened to trigger it on everyone's phones. We need to get to the core of it. I have been through all my Connections Settings trying to find a way to turn it off, but couldn't find anything yet. It would be great to get rid of this annoyance.
What ROM do you have? I have DUttys 3.1....
i get this on dutty 3.3. think its only started popping up recently. im on o2 in uk
I'm on Dutty's 3.5 (I think). Will revert back to Swiftblade's during the weekend, I'll post my findings then.
and I am on duttys 3.3, could this be connected to duttys rom?
I've also got Dutty's 3.3 ROM but have had it working fine before this message started coming up. I'm on T-mobile UK.
Folks just bought Htc Diamond
Now whenever i connect to GPS randomly a annoying error msg pops out stating cannot connect
Dialed:
Cannot connect for an unknown reason. To check your connection settings and change them blah blah...
I want to disable this message as its very annoying
vishalkishnani said:
Folks just bought Htc Diamond
Now whenever i connect to GPS randomly a annoying error msg pops out stating cannot connect
Dialed:
Cannot connect for an unknown reason. To check your connection settings and change them blah blah...
I want to disable this message as its very annoying
Click to expand...
Click to collapse
Do you mean gps or gprs? if your talkin bwt ur gprs its common that a carrier will drop an internet connection when an antenna is full dont worry its not a problem just reconnect
hi
I am talking about GPS....when i connect gps software and it doesnt find a signal it shows that message. i know its not a problem / issue with the phone. i just want to turn that poping messge off as it is annoying and pops up in screen time and again
We are also getting this error message (and we are using GPRS). It has the effect of stopping our application interacting with the internet until the user presses the 'Dismiss' button.
Our application will automatically reconnect when the phone is able to get a GPRS connection. My question is can we stop the message/dialog appearing by capturing the event in our application? (We can't always wait for the user to clear the message)
exactly...its so frustrating clicking that "dismiss" button everytime
Same problem on the HTC Touch Pro.
Same problem here on ATT's stock Rom 1.95.502.5 WWE. It started about two weeks ago when I noticed my phone was dead when I got home from work (which is highly unusual for it to even go below 50% without me running to charge it). I keep noticing "Cannot Connect" bubbles from my [H] data symbol.
Dialed: wap.cingular
Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
Click to expand...
Click to collapse
The only way I could get rid of the problem was to do a soft reset with the stylus. About a week ago I got really good and disgusted with it and decided that I was going to try a new radio and see if that helps. I went with 12.12.25.19 and the matching .dll file. After doing that the error seemed to go away for 2-3 days. Now starting this past Friday afternoon I'm back to the constant cannot connect bubbles. I'm not even sure what program is trying to connect because MemMaid says none of them are open except TouchFlo!
At least with the new radio I can go into Settings > Communication and toggle in and out of airplane mode which fixes the problem for 30 minutes at a time.
I don't mind the pop-ups, I mind the fact they prevent my screen from fully going to sleep which is killing my battery life! My screen will dim with the pop-ups but it won't go completely off which gives me about 3-4 hours battery life if I don't check it. Now I'm a compulsive phone-checker (I feel like those crackberry addicts) just to keep turing the screen off!
Not sure when it started.. but for sometime now if i connect my phone active sync starts and looks like its going to sync my contacts.. and even after minutes and i mean more than 5 or 10 it still on the screen where its just thinking with the green icon spinning. Nothing ever happens, i lost my 300+ contacts during one of these attempts and dont ask how, but someone how it finally connected and i got them all back.. so im not looking to lose them again, since i cannt get it to sync..
Either way.. i have 2 issues..
#1 connecting the phone no longer syncs my contacts..
#2 when disconnecting the phone it will cause my pc to crash.. im sure this has something to do with maybe the USB driver.. but has anyone seen any of these issues and if so what suggestions do you have that i can try..
i have tried a few things to try and resolve my sync issue, but since i lost the 300 contacts and took me 3 days to get them back on the phone, im not looking to delete my partnership again so that i can lose them and run the risk of not getting them back on there..