hi guys, I am a novice tilt user and have never upgraded anything on my tilt. all of a sudden today, I turn the phone one and get a screen with a horizontal red, green, blue and white bars. The text in the red bar up top says:
KAIS1*0
SPL-1.56.0000
CPLD-8
the text in the white bar at the bottom says: Serial
I have serached the forum and foun references to this screen but they all seemed to be in relation to someone performing an upgrade of some sort. This is not the case with me. I wasnt doing anything with the phone. I tried a reset (holding down the 2 soft keys and hitting the reset button) and it just came back to the same screen.
I am a computer tech and wont have any problems flashing the bios or anything if that is whats needed, i just dont know where to begin. Any help would be greatly appreciated, thanks!
taz
At first I was going to say unplug the USB, but this has nothing to do with upgrading, as you said. I've never heard of this. My search comes up short. Try calling ATT or taking it back to where you bought it. Thats the best I can come up with. Hopefully someone else can give you a hand.
thanks for the reply, this will be the second tilt that I've returned (for a different issue). I bet that this is a software issue, I'm just not sure how to resolve it. thanks again, maybe someone else who experienced the same problem will chime in!
taz
Hi guys,
I had the same problem with a french rom. What I did was re-format my SD card to fat32, just copied the Kovsimg.nbh file to it and it worked like a charm. I guess it was pre-formatted to FAT16.
I hope it works for you too.
Related
I have this wierd experience with my Imate PDA2K, yesterday, when I open my phone (imate pda2k), the screen suddenly flicker... and then it fades. so i did a soft reset, as i thought would help me out of the problem...But to my surprise, nothing happened, it goes on flickering and fading, until such time, that the screen totally faded, all you can see is a whjite screen with no thing visible.. after minutes of doing a hard reset, still nothing happened, i leave that **** phone on the shelf. after 30 minutes, I checked it and all things back to normal, the screen was ok till a couple of hours, and that same problem happened again till now... What im gonna do? I always end up as if I will throw that silly damn phone to the trash can.. hehe.. What could be the problem then? Is the poroblem was on the LCD? Will the upgrade to v1.40.. solve this? Pls any idea, im desperate..
hooo
No one cares? ..............m,b
Multiple posts of the same problem certainly won't help - if someone knows the answer they'll help but if they don't you'll just hack them off.
Be patient.
sorry for
posting that same problem again and again on different forums.. I thought that will be the fastest way for me to have the answer to my problem...
Now the screen of the phone back to normal, but still, I experience that flicker thing on the screen... Its hard for me coz, I bought the phone in the Middle east, and Im using it here in the philippine... and no imate product is being sold here in my place.
Hey...
the problem still there... Another thing I noticed was that the screen will fade and then for you to be able to see a text or anything on the screen, you have to press the on/off button.. but still after some times, same stupid thing will happen again and again...... what should i do? Anyone of you here experiencig that same problem with your blue angels?
hey
Im so desperate... the problem still there... I have not upgraded to the latest rom version yet.. Sometimes the screen goes blank (just all white).. and then when your press the on/off button several times, thats the time the screen will go back to normal, and then suddenly it will flicker for about a minute and then it stops. TO THOSE WHO ARE EXPERTS HERE IN THIS FORUM, ANY IDEA WHAT COULD BE THE PROBLEM? I DID A HARD RESET SEVERAL TIMES ALREADY AS I THOUGHT COULD HELP ME SOLVE THE PROBLEM BUT STILL NO IMPROVEMENTS.. FOR ME TO DECIDE IF EVER THE PROBLEM IS ON THE HARDWARE SIDE, MY MOTHER WILL BRING THE PHONE WITH HER IN KUWAIT, SHE WILL GO BACK THIS SEPTEMBER 11, WE'RE HERE IN THE PHILIPPINES NO IMATE DISTRIBUTOR HERE AND ITS HARD ON MY SIDE THAT WHENEVER THERE IS A PROBLEM ON THE PHONE, NOBODY ASIDE FROM YOURSELF THAT CAN HELP YOU SOLVE THE PROBLEM.............THANKS
hey
I b ring it to repair shop this morning, (actually they are not repairing Blue Angel) but he had tried to repair the same phjone with the same problem as mine before, he said that the problem was on the ( I dont know the right spelling though., hehe(Flex)? is it true?
Hi, Well i came here and found WM6 install for the BA and so i go and try and install it, i think nothing of it. Then the installer comes up saying that it cant detect my phone so i go and look at my phone and Its just a gray screen with Serial at the top and V 1.02 at the bottom. Man, i just got this phone and im hopeing i didnt screw it up already =/ this freaking sucks. Can anyone help me please
Are you using USB port to connect your phone? If you are your usb connection is not working because it will show usb on the screen rather than serial. Need to check your usb connection if you are using usb.
Well, it says that when i got it conected to the dock, But serial when its off.
If it says that then the usb connection is AOK.
Hmm... You mean you havent installed it yet?
Try "Hard Resetting" then reDo the process of Upgrading step by step... maybe you missed something.
I think that as long as your bootloader is intact. You can install your OS definitely, I think, correct me if im wrong. coz that happened to me and i revived my BA.
Well it was just an installer, I ran the .exe and it was like "Installing WM6!!" then it just cut off and did this crap. So is there annother way to install it? did i do something wrong?
Well i tried "Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner)." But the screen lights up and then goes blank then it pops up with the serial jazz. I hope i can get this fixed because i cant afford a new phone.
Try pressing/hold the (Record Button) + (Power Button) Then Stick the (Reset Button)...
that'll make it go into the Interface Mode(Bootloader) that's either Serial or USB... then try to flash it again.
Well, I do that and the screen does the same thing, when i hook it up to the dock it does the famose xp Bedunk sound saying it knows something is conected. How do i install the thing again if active sync cant find it?
Okay, well i went to try and install it anyways and it seemed like it worked... why do i have such bad luck?
Well now after it was complete n i did the soft reset, It has 4 big bold Color lines, and at the bottom it says
No GSM
D 5.60.00 WWE
=/ whats that mean? Im too damn young for all this technical crap man, any help, please...
Hey xXBuddahXx
It-s all good... Just reset the device pushing the pin with the stylus and everything will be fine...
Anyway, like SilverSamurai said..., if you can get into bootloader mode then you're fine...
Make sure you upgrade using the MaUpgradeUt_noID app and follow carefully the instructions step by step: http://forum.xda-developers.com/showthread.php?t=326532
My first upgrade to another 2003 firmware was a nightmare and many times I've felt my heart pumping like it was gonna burst just looking at my beloved BA not booting... And since I think I installed almost every ROM I could get my hands on.
My advice, try again cos Helmi's WM6 Pro really rocks and it's the most stable I've seen so far...
Good luck,
Brice
I've just got my phone repaired 2 days ago due to same problem and its dead again. It's showing me 4 colours bars, unable to boot or switch off. Please see attached photo.
Technician Notes on the Service Repair Job Card says " Reconnected Flexes, Loaded New Software and Passed all tests."
Whatever Flexes means? Hardware circuit board problem? Anybody knows whats that?
Its going to be another 2-3 weeks wait for Three Sydney to repair it....sigh....
I'm unable to find similar reported problem online. Anyone, please advice. It died when it shows nothing on the screen with blinking green light. I've not done any flashing or mod of any kind, its a 4 month old phone.
the flexes are what connects the screen/other hardware on the sliding face to the main board on the part that does not slide. Seems like your kaiser is putting itsself into bootloader for some reason. if you have knowledge of mtty maybe running some mtty commands would tell us more of why it seems to like to erase its on memory lol... there is a whole section in the wiki on mtty and I thread I believe also try contacting POF or OLI they have vast knowledge about the works of the kaiser
Thanks for the tips austinsnyc, after leaving it on with the bootloader screen for the whole night until it drain the batt completely, I was able to boot up again while charging.
I'm still interested to know why would it suddenly just go to bootloader screen, i'll read up on mtty.
Cheers,
JK
lol, you might have been fine if you just did a soft reset. but still that doesnt solve the issue of why it went into bootloader in the first place
Thanks for reminding about the soft reset, I tried that when it happen for the very first time I had this problem. That didn't help either and I had to send in for repair.
Whats the purpose of the bootloader anyway? In what situation would it appear normally?
you can manually place your device into bootloader by holding the camera button and then reset. a device going into bootloader out of the blue is usually never a good thing........unless maybe there was a situation where the camera button was somehow held down while your device restarted.
My touch diamond with rom 1.93 suddenly is very dim screen. When i reset & there is nothing on the screen but i can hear the os startup sounds. After a while i will be able to see something on the screen, but it is extremely dim to the put where i cant use the phone outside. An error shows up right away stating that there is a microp version mismatch & to reinstall the microp firmware. Tried reinstalling the 1.93 rom, but that did not help. still the same error. Can anyone help out here, im at a total loss? Thanks Malik
And?
Did you found the solution for this?
Send it warranty if uu don't want it take appart, i had same problem i recon is the screen connection (in my it was lose)....
I opened a tread 4 it here
http://forum.xda-developers.com/showthread.php?t=418828
can u tell me if u find an answer? cuz i got the same prob
@ check this out
http://forum.xda-developers.com/showthread.php?t=657514
Use warranty if you have. Goto a tech guy if possible. If no solution then sit down and get ready to rip it apart.
P.M me, i'll help all i can, cause i'm in the same boat, but in despair. Have no hope left so have boldness to do anything.!
Bulls eye!
microp error
This occurs when while boot diamond fails to find the correct hardware radio, wifi and Bluetooth
Well the small cable was not attached properly so i opened and attached it. Hell of a job, HTC are very compact.
And WIFI bluetoth back on.
Warn you this cable is very delicate and HTC's original manual says to replace this cable once you open your device. But where will you find a cable?!?!
And I have got the screen from ebay U.S.
Now while replacing the screen the tech guy stupid NooB forgot to take off the last fblack colored film of the display and reattached the new one over it, so now the digitizer isnt wrking properly and the new screen appears very dark.
I have to do it my self. I dont know if i will ever have my diamond back again
For display and lower keyboard panel(having buttons and breath)
You have to attach two small connectors. They are very hard to install and yes it would be better you get it done from some place.
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
luisdesigns said:
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
Click to expand...
Click to collapse
Maybe if you start sharing what rom are U using My advice is that you definitely should flash another rom or reflash your stock rom to solve the issues you are experiencing. Please read the sticky of how to do it
you can reset it to factory settings (the ROM you last flashed that is) by this method:
press and hold the two upper hardware keys next to your call end and call button. While pressing and holding them do a soft reset. A white screen with blue text should come up. Press the green call button and wait for it to reach the screen after the percentage screen. Then press the green call button again and it will be like it first was out of the box (or when you flashed a ROM).
Kaiser tytn II
The soft reset that exactly what i did and that´s what screwed up my kaiser , i am going to re-flash it , i will look on how to do it and will have a try.
ok, one slight problem, i have a macbook all i find is for pc
luisdesigns said:
ok, one slight problem, i have a macbook all i find is for pc
Click to expand...
Click to collapse
You'll either have to create a partition and install windows on it or flash via sd card. Link here to get you started:
http://forum.xda-developers.com/showthread.php?t=433835
thank you so much, i will try it this evening from my pc hope it fixes the issue. Will let you know