Related
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440
I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.
calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck
dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!
Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot
Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.
well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine
U can also try different cable, just to be sure its not the cable that is causing these problems.
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?
Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing
I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)
I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?
Hello there,
I've been searching around the internet now for about 3 hours to no avail, I have even resorted to emailing HTC for help. Thats how desperate I am.
I have a MDA Vario III (HTC TYTN 2) that has worked flawlessly for a long time (since christmas) but has suddenly stopped communicating with Activesync.
Im not bothered about syncing contacts etc, all i want to do is use the file browser to download and upload photos etc.
I have tried all the suggestions i have found so far (enabling adanced network functionality, disabling it, reinstalling Activesync etc.) to no working answer.
Can anyone help me?
raty
Not sure if you tried this or not. Delete your existing partnership and then reconnect it. Good luck. Activesync sux.
Hey,
I've deleted the partnerships off my vario3, and completly reinstalled activesync. Still didnt work.
Ive taken the phone into the T-mobile shop i bought it from, they seem a little too keen to send it off for repairs, maybe this is turning into more of a regular thing that i thought?
Kept onto the phone just for now, I wnt to try and fix it before i send it off.
Uh... why send it off if you fix it?
read through this thread and look at post #10 and see if your computer is detecting the device at all..
also try removing your simcard and microSD card and connect your device to your pc in bootloader mode and see if it says USB on the bottom.
ratykat said:
Hello there,
I've been searching around the internet now for about 3 hours to no avail, I have even resorted to emailing HTC for help. Thats how desperate I am.
I have a MDA Vario III (HTC TYTN 2) that has worked flawlessly for a long time (since christmas) but has suddenly stopped communicating with Activesync.
Click to expand...
Click to collapse
It's probably the Notification queues have lost their active sync bits
use Pocket IE or Opera (mobile) to download and install something like MemMaid or SKTools
you can then add the Active Sync components back into the notification queues, and then rebuild them
Once done you should be able to sync etc
notification queues! What is that?
First I ever heard of that. I am having active sync issues as well and I have tried everything in this post.
Nothing works, it connected a few nights ago and it all of a sudden stayed connected all night. I am Back to having problems again.
Does anyone know if avast will hurt active sync?
here is your answer...
http://forum.xda-developers.com/showthread.php?t=362679
read thorugh EVERY LINK and you should be good
ive read through those links and none of them have a fix for me.
The computer recognises my phone, in device manager it comes up under Windows CE USB Devices as HTC USB Sync.
i shall try the bootloader idea and report back.
@Kimtyson- if i fix it i wont be sending it off, that would be obsurd
@pjwilkin- i have never come across that before while reading about the titan, fancy sharing some knowledge?
Just got my phone into bootloader (thanks wiki) and when the usb cable is connected it says USB and the computer starts to install drivers etc.
***bump***
sorry thats not proper foru etiquet but im desperate for som answers
Some further things to try
Can you connect via Activesync using Bluetooth? What about on other PCs and on other USB ports on your PC? What happens if you delete that HTC USB Sync listing in device manager, unplug the phone, reboot the PC and then reinstall Activesync 4.5 (I use the CDROM the phone came with the phone for that)? See if you can get the phone shop to plug it into one of their PCs with Activesync or WMDC.If it's showing up in your PCs device manager then it's likely some sort of problem/configuration issue with your desktop PC it's connecting to - not a problem with the phone itself.
this has happened to me ..
i vote for changing usb ports..
you probly already did so..
please post when you fix it..
ratykat said:
The computer recognises my phone, in device manager it comes up under Windows CE USB Devices as HTC USB Sync.
Click to expand...
Click to collapse
this cancels out any hardware problems... so do as the previous posts mentioned, its all good advice.
im assuming that all activesync services etc load up ?
Hello,
Firstly I want excuse that I open new threat and open it here, but please let me explain it why I do it.
I have O2 Stellar, with SPL:1.82.0000 and my USB dont work, and USB connector is OK and cable or USB port too. I try it at diferent PCs with diferent systems aka XP, Vista.
Main problem is that USB dont sync with ActiveSync or other, no "Tada sound" dont show "not recognize" really nothing action when I plug it to USB.
And charging is work only when PDA is off and light RED LIGHT but when is off, than no action, no light, no charging.
I know that this is threat for "Kaiser General" but I can live with charging only when is off, but I cant live withou coocked ROMs, I really try use all HardSPL new Radios, NBH from shippedroms copy to SDcard (Formatted to FAT32) and it only show "LOADING..." but nothing, more, still Loading.
I was tryed JumpSPL but it dont flash from SDcard, and USB is not showing and not working, that I cant use MTTY.
Please let this threat open, I really need HELP
Do someone know if this is Hardware or Sofware problem?
I cant send it to service, from my country is too expensive (like new phone)
Thank you in advance
Jozef Ziak
Edit: The handsfree is working perfect, I really dont know what is it.
i have the same problem i been through three phones already 1 that i used roms on and two brand new ones from warranty att said it's a hardware issue".they are sending me another phone.
I had almost a similar problem with my tilt at one point. Check your usb to pc settings and make sure you have "advance connection" (or something similar I can't remember exactly what it says) checked. On the rom I am using now shows something different there. I says "enable faster data sync" "uncheck if activesync doesn't recognize the device"
Thank you, but nothing reconize my PDA, no sound after plug, nothing when I go manualy to Bootloader, only show serial, not USB
same problem
Hi,
I had the same problem. I tried everything but nothing helped. I had 2 more months of warranty so they changed the main panel. After I got it back from the service it was working for 3 weeks long and now again died with the same issue.
Strange. I have to send it back to the service.
HI there , I had the same problem for about 4 month but i solved it >>> how ?
Just clean your htc USB port and check if it is broken or not and you will see that your issue will be solved brother
Alright so I was trying to update the rom on my phone to no avail, always the damn program (custom ruu.exe) came up on the last screen displaying error 262 (update error) which is VERY common.
So I find in multiple forums of people recommending a certain update of the diamond phone series, I dont know why the f^*( I tried it, halfway in the update the phone went dark, and now wont turn on AT ALL.
I try the soft reset, battery out for a while, reinstall active sync, try in different pc's (win7 64bit, xp 32bit) no hope so far.... Well the ONLY sign of life is when I plug the phone via usb cable to either PC there is a hardware detected under "Qualcomm CDMA technologies MSM"
I believe its some sort of diagnostic mode to access the phone, but I cannot find drivers ANYWHERE! Please folks help me out is this thing done? is there hope?
PS i tried to update the drive on the Qualcomm device to wince usb (HTC USB SYNC) and it will install, however since IM NOT ABLE to go in the bootloader what else can i try?
i cannot access the bootloader & phone would not turn on.
mrjacob212 said:
Alright so I was trying to update the rom on my phone to no avail, always the damn program (custom ruu.exe) came up on the last screen displaying error 262 (update error) which is VERY common.
So I find in multiple forums of people recommending a certain update of the diamond phone series, I dont know why the f^*( I tried it, halfway in the update the phone went dark, and now wont turn on AT ALL.
I try the soft reset, battery out for a while, reinstall active sync, try in different pc's (win7 64bit, xp 32bit) no hope so far.... Well the ONLY sign of life is when I plug the phone via usb cable to either PC there is a hardware detected under "Qualcomm CDMA technologies MSM"
I believe its some sort of diagnostic mode to access the phone, but I cannot find drivers ANYWHERE! Please folks help me out is this thing done? is there hope?
PS i tried to update the drive on the Qualcomm device to wince usb (HTC USB SYNC) and it will install, however since IM NOT ABLE to go in the bootloader what else can i try?
i cannot access the bootloader & phone would not turn on.
Click to expand...
Click to collapse
I hate to be the one to tell you this, but sounds like your only hope lies in using jtag (which is not easy or cheap, could try a warrenty exchange.)
zelendel said:
I hate to be the one to tell you this, but sounds like your only hope lies in using jtag (which is not easy or cheap, could try a warrenty exchange.)
Click to expand...
Click to collapse
You could also put it in a microwave, or hook it up to a car battery, say it fried it self, then get a new on warranty
so you guys are telling me theres 100% nothing i can do?
not even with the qualcomm usb situation?
mrjacob212 said:
so you guys are telling me theres 100% nothing i can do?
not even with the qualcomm usb situation?
Click to expand...
Click to collapse
so you flash a diamond gsm rom on cdma rhodium your device is one expensife brick its not easy to unbrick it best you can do is say you charge it all night and found not working in the morning send it in for repair and hope you get new one
a good advice read read read before even trying it always be shore
threads like this should get pinned for eternity.
hah i was thinking something like that, except that i just noticed battery low before sleeping, seemed drained in morning, wont turn on now, tried a friends battery and same problem.
PS: the main reason this happened and propably similar threads, is because there are notices to UPDATE YOUR TP2 with a DIAMOND UNLOCKER which misleads us novice users! its a shame for this to happen to such an expensive phone, and i wont usually do what ill attempt, but cant repay this company $600 for a simple fix for them.
mrjacob212 said:
Alright so I was trying to update the rom on my phone to no avail, always the damn program (custom ruu.exe) came up on the last screen displaying error 262 (update error) which is VERY common.
So I find in multiple forums of people recommending a certain update of the diamond phone series, I dont know why the f^*( I tried it, halfway in the update the phone went dark, and now wont turn on AT ALL.
I try the soft reset, battery out for a while, reinstall active sync, try in different pc's (win7 64bit, xp 32bit) no hope so far.... Well the ONLY sign of life is when I plug the phone via usb cable to either PC there is a hardware detected under "Qualcomm CDMA technologies MSM"
I believe its some sort of diagnostic mode to access the phone, but I cannot find drivers ANYWHERE! Please folks help me out is this thing done? is there hope?
PS i tried to update the drive on the Qualcomm device to wince usb (HTC USB SYNC) and it will install, however since IM NOT ABLE to go in the bootloader what else can i try?
i cannot access the bootloader & phone would not turn on.
Click to expand...
Click to collapse
you could try getting insurance for the phone trough a bank etc register it wait for a month with them and say u lost it or something