Related
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440
I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.
calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck
dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!
Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas
hi guys
first of all sorry for this subject name but im really pissed off, so pissed i could kill sum1 seriously...
i bought this friggin ppc like 2 years soon, and of all that 2 years i've been using it for half a year in total...
first problem was lcd missaligned, than soon started USB problems..
managed to repair LCD (changed it completely) but now the USB problem remains and im friggin tired dead of all this mess... i don't have a clue what to do anymore..
so, cignular 8125, G3 series... molski 2.26.10.2 AKU 2.3 rom on it...
problems now:
it boots up after 2-3 minutes..
than the worst problem is that USB cant sync with pc...
i tried plugging in motherboard usb on pc,. than tried to get even a 2nd PCI usb card and always the same problem..
when i connect pc via usb cable to ppc, i see ballon saying: usb found, generic rndis, PocketPC mobile based bla bla bla and after few secs i get usb hardware might not work properly, error ocured.. and that happens all the time, i even get sometimes on PPC a screen saying USB> connecting to host (cancel, hide) and it freezes there...
so, after this mess i send ppc to a service guy that changed me the USB plug on ppc (as u guys said it could solve the problem http://tinyurl.com/3xvj4m )
so he changed it and im stuck again on this friggin ppc...
goddamn %&/()= i wish i was never so stupid to buy this piece of machinery, after only half a year it bricked down and now i'm only loosing my mind...
anyway... can anyone make this for me http://tinyurl.com/2ku6lw copy his rom on sd card and send me that copy of sd card over mail or put it on ftp?
Any other thing doesnt help me, even in bootload mode it says USB in left corner on ppc, but again pc says usb not recognized and again it wont get connected (so no RUU update)...
guys, im seriously desperate....
btw, anyone knows sum1 in eastern or central europe a person or service capable to fix this....? the ppc i got it from usa, but im in eastern europe..
thanks and i hope u will understand my nervouse..
did u allready try to connect with other pcs?
i had problems like this when
1.) i do not switch off internal firewall, ashampoo, didn't have this problem with sygate personal
2.) i had software installed, called PLV - Manager , has something to do with my work..^^, which connects via Serial port and somehow does also block usb ports.
well yea i tried other pcs, but maybe the firewall is the key and some other programs... i'll see this weekend... any1 suggestion for a service guy who can manage to repair the ppc in case i fail?
thx
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot
Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.
well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine
U can also try different cable, just to be sure its not the cable that is causing these problems.
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?
Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing
I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)
I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?
Hi there, I reset my Tilt to factory settings yesterday and now when I plug it into my computer it does not detect anything.
The phone does charge, so I know that the connection is there.
I've had this problem before but I can't remember what exactly it is that I did to fix it. I've searched the forum and I can't find anything helpful either.
Anyone know what I need to do to fix this?
Thanks!
jerryjohn said:
Hi there, I reset my Tilt to factory settings yesterday and now when I plug it into my computer it does not detect anything.
The phone does charge, so I know that the connection is there.
I've had this problem before but I can't remember what exactly it is that I did to fix it. I've searched the forum and I can't find anything helpful either.
Anyone know what I need to do to fix this?
Thanks!
Click to expand...
Click to collapse
Go to settings> connections > usb to pc> and uncheck advanced network functionality or enable faster data sync, Whatever it says.
hello,
i've got the same problem, did what you said, but it doesn't work...
and i need the mobile device center connection to flash my tytn! ;-)
mdbq said:
hello,
i've got the same problem, did what you said, but it doesn't work...
and i need the mobile device center connection to flash my tytn! ;-)
Click to expand...
Click to collapse
You should be able to flash using your micro SD.
ChumleyEX said:
You should be able to flash using your micro SD.
Click to expand...
Click to collapse
............but unfortunately you need to initially flash Hardspl thru your PC, from then on everything can be done through the SD card.
details details..
Have you tried another cable?
hi, i got this problem tu. i plug in the usb cable, but nothing appeared on my computer.id doesnt say it detected anything (usually it says found new hardware). i tried with several usb cables.still the same. but the phone is charged with all those cables i tried.
Yeah tried it and still got nothing. I am so stuck on what it could be.
I've tried 3 different cables and still have nothing. It worked a couple days ago, but ever since I reformated my phone it stopped working.
I don't understand why my computer doesn't automatically detect it as it did in the past.
reformat it again?
/grasp at straws
My tilt is doing the same thing. 2 days ago I was updating it and when I connected it to the computer nothing happened. Yesterday I tried flashing a new rom, thinking it would wipe it clean and make it connect again, however, it did not work. I am at a loss. Any ideas?
did hard reset and still unable to detect my phone.i'm using G.DK. ROM
i still have the problem
i trized a lot of cables, but from now the computer even don't say that it an unknown plyg is, he simply doesnt detect it. i'm just able to charge my phone, that's it
and in fact i just wanna put the official french rom on it because it's in dutch, i'm bilingual but it's more pleasant to have my phone in my mother language!
tahnks all of you for your help!
denco7 said:
Go to settings> connections > usb to pc> and uncheck advanced network functionality or enable faster data sync, Whatever it says.
Click to expand...
Click to collapse
Hmmm, this is starting to smell more than fishy with more and more complaints popping up... Just wiped out my laptop thinking it was an update that killed activesync; complete wipe and still no connection; every and any other type of usb cables connect flawlessly from camera, psp, ds, dsi, usb plug in all work no prob; yet kaiser refuses to sync even with new cables before and after activesync updates
Try a different PC if possible. Make sure Active Sync or Mobile Center is installed prior to plugging it in.
Another one
--DELETE THIS POST-- I added to it, then accidentally double-posted.
Another one
I'll add to the pile. Exact same problem. ActiveSync doesn't work, but phone does charge. Various cables used, hard reset done. Haven't yet flashed a new ROM, though. I'm using an HTC official 6.1.
Last successful run of ActiveSync was May 8th. I used System Restore on my PC to pre-date May 8th. Still nothing.
Didn't make any major installations to either the PC (XP SP3) or the Tilt on or around that date. It just...stopped working.
All other functions seemed to work normally, except that I got an alert from QuickGPS that it hadn't been updated since that date. I was able to update that successfully.
Same problem on my fathers tytn II... probably HW prob. Will look into it...
igord said:
Same problem on my fathers tytn II... probably HW prob. Will look into it...
Click to expand...
Click to collapse
Yep, it's definitely a hardware issue with the Kaisers usb port not fully connecting; I pushed the usb bar in a bit with the back end of the stylus and presto! Connected immediately
I'll also confirm success by the use of a little bit of brute force. Back end of stylus, a little manipulation, connect, and the "ba-DING!" sound in XP. Wish I'd done that before a hard reset...
Alright so I was trying to update the rom on my phone to no avail, always the damn program (custom ruu.exe) came up on the last screen displaying error 262 (update error) which is VERY common.
So I find in multiple forums of people recommending a certain update of the diamond phone series, I dont know why the f^*( I tried it, halfway in the update the phone went dark, and now wont turn on AT ALL.
I try the soft reset, battery out for a while, reinstall active sync, try in different pc's (win7 64bit, xp 32bit) no hope so far.... Well the ONLY sign of life is when I plug the phone via usb cable to either PC there is a hardware detected under "Qualcomm CDMA technologies MSM"
I believe its some sort of diagnostic mode to access the phone, but I cannot find drivers ANYWHERE! Please folks help me out is this thing done? is there hope?
PS i tried to update the drive on the Qualcomm device to wince usb (HTC USB SYNC) and it will install, however since IM NOT ABLE to go in the bootloader what else can i try?
i cannot access the bootloader & phone would not turn on.
mrjacob212 said:
Alright so I was trying to update the rom on my phone to no avail, always the damn program (custom ruu.exe) came up on the last screen displaying error 262 (update error) which is VERY common.
So I find in multiple forums of people recommending a certain update of the diamond phone series, I dont know why the f^*( I tried it, halfway in the update the phone went dark, and now wont turn on AT ALL.
I try the soft reset, battery out for a while, reinstall active sync, try in different pc's (win7 64bit, xp 32bit) no hope so far.... Well the ONLY sign of life is when I plug the phone via usb cable to either PC there is a hardware detected under "Qualcomm CDMA technologies MSM"
I believe its some sort of diagnostic mode to access the phone, but I cannot find drivers ANYWHERE! Please folks help me out is this thing done? is there hope?
PS i tried to update the drive on the Qualcomm device to wince usb (HTC USB SYNC) and it will install, however since IM NOT ABLE to go in the bootloader what else can i try?
i cannot access the bootloader & phone would not turn on.
Click to expand...
Click to collapse
I hate to be the one to tell you this, but sounds like your only hope lies in using jtag (which is not easy or cheap, could try a warrenty exchange.)
zelendel said:
I hate to be the one to tell you this, but sounds like your only hope lies in using jtag (which is not easy or cheap, could try a warrenty exchange.)
Click to expand...
Click to collapse
You could also put it in a microwave, or hook it up to a car battery, say it fried it self, then get a new on warranty
so you guys are telling me theres 100% nothing i can do?
not even with the qualcomm usb situation?
mrjacob212 said:
so you guys are telling me theres 100% nothing i can do?
not even with the qualcomm usb situation?
Click to expand...
Click to collapse
so you flash a diamond gsm rom on cdma rhodium your device is one expensife brick its not easy to unbrick it best you can do is say you charge it all night and found not working in the morning send it in for repair and hope you get new one
a good advice read read read before even trying it always be shore
threads like this should get pinned for eternity.
hah i was thinking something like that, except that i just noticed battery low before sleeping, seemed drained in morning, wont turn on now, tried a friends battery and same problem.
PS: the main reason this happened and propably similar threads, is because there are notices to UPDATE YOUR TP2 with a DIAMOND UNLOCKER which misleads us novice users! its a shame for this to happen to such an expensive phone, and i wont usually do what ill attempt, but cant repay this company $600 for a simple fix for them.
mrjacob212 said:
Alright so I was trying to update the rom on my phone to no avail, always the damn program (custom ruu.exe) came up on the last screen displaying error 262 (update error) which is VERY common.
So I find in multiple forums of people recommending a certain update of the diamond phone series, I dont know why the f^*( I tried it, halfway in the update the phone went dark, and now wont turn on AT ALL.
I try the soft reset, battery out for a while, reinstall active sync, try in different pc's (win7 64bit, xp 32bit) no hope so far.... Well the ONLY sign of life is when I plug the phone via usb cable to either PC there is a hardware detected under "Qualcomm CDMA technologies MSM"
I believe its some sort of diagnostic mode to access the phone, but I cannot find drivers ANYWHERE! Please folks help me out is this thing done? is there hope?
PS i tried to update the drive on the Qualcomm device to wince usb (HTC USB SYNC) and it will install, however since IM NOT ABLE to go in the bootloader what else can i try?
i cannot access the bootloader & phone would not turn on.
Click to expand...
Click to collapse
you could try getting insurance for the phone trough a bank etc register it wait for a month with them and say u lost it or something