Couple this one with a Sprint charger , Clip it to the vent and you are on your way. It can be found at Target and Advance auto parts. Of course you can buy a 119 dollars dash from Seidio if you wish however this one if for simple guys looking for functionality and low price.
Later
Noteictures taken with the mean Sanyo 9000. That is a great phone.
I had one almost identical to that when I had my PPC6700Q, but it had a bendable arm rather than a vent mount.. needless to say, my car rides a little rough thanks to lowered suspension and the bendable arm broke, dropping my nearly new PPC6700Q on the shift knob, which happened to be made of solid aluminum.
Glad yours is working out for you, though
Thanks Mak, so far so good man. That thing has a good grip on the Mogul,it ain't going nowhere unless I flip that biatch again,but then I didn't flip any since I stopped drinking 5 years ago.lol
nice, so this is just the regular dash mount? just wonderin, will the mogul fit snuggly or will i have to stuff other things to make it fit?
hey Total:
This is a good unit man, you do not have to add anything . Just take it out of the box, install te clips and get the side arms to open up to hug the mogul tight since they are adjustable. No vibrations. Give it a shot.
good to hear. maybe i'll stop by my local target sometime this week. thanks!
is "Stype" the brand? also what department did you find it in at target?
"typeS" is indeed the brand. The unit was with other car accessories like wipers,cleaning supplies and others. I hope you find it becasue this thing does what's needed. A friend has one slightly different, little ticker and take a bit more space. I elected this silver one coz it is slim and looks kool also the bottom arms that holds the Mogul foldes up. Good luck
Picked 2 up today from Target for 5 bucks each. They were on clearance and it does it's job well. Thanks for the find.
Good move Will, I am glad to hear man.
I went to my local Target and picked up 3 of them for $8 bucks. Mogul fits well....
thanks for the find.
You guys are making a kill. Good job.
hbenz2008 said:
Couple this one with a Sprint charger , Clip it to the vent and you are on your way. It can be found at Target and Advance auto parts...
Click to expand...
Click to collapse
So, I think I found it at Advance Auto Parts
Does that look right?
The brand is right but the look is different, the back of it looks little fat . That doesn't mean it won't work. Are you planning on ordering it online or picking it up?
hbenz2008 said:
The brand is right but the look is different, the back of it looks little fat . That doesn't mean it won't work. Are you planning on ordering it online or picking it up?
Click to expand...
Click to collapse
I think I'll pick it up to make sure it fits. I'll have to drive across town, but weekends are for this sort of thing, right?
Thanks.
-Jason
Good idea man, hit Target if there is any around where you live. Good luck .
for those who were able to pick up this unit, could you please provide any feedback? thanks.
What those of us that have the extended battery?
bah, both target and the advance by house did not have this unit. advance had scosche units and forgot what target had. I will try again since at both store teh items were on "clearance"
Well we don't have a Target and the Advance Autoparts didn't have the OP's item but I found a similar one at Walmart for $8 that also works well. Its the Onyx XT MP3 Player / Phone Holder.
The vent mount one is $5 and I haven't tried it but the goose neck suction cup one was only $8.
Here's a pic.
Here's the manufacturer's link.
http://www.causa.com/store/catalog.asp?item=3127&lang=en&navParent_id=108&category_id=120
Holds tightly and the goose neck is fairly rigid with minimal bounce when braced against the dash. Edit: And the phone charger does fit nicely under the metal bottom segment. The buttons are all accessable even with the bar...
Of course YMMV....
Related
Does anyone know of a supplier of IP65 rated cases (or something close to this), along the lines of the otterboxes http://www.otterbox.com/products/pda_cases/1900/ ?
There used to be a company that made clear perspex cases that I don't believe were rated to IP standards, but they looked quite nice. Can't find them anywhere on the net though, and cases purposly made for the Athena seem few and far on the ground.
TVM in advance!
Have you tried contacting OB, and seeing if they have a box that will fit the 7500? They prob. do...
dude, where do you work !! in a war zone ? don't forget that the athena can only take so much shock, although the case might be up to it you will have to pad it to protect the phone.
What an ugly case!
The ameo/athena still gets "ooooohs and aaaaahs" along with "is'nt it pretty, (pretty BIG), how do you answer it???" most times that people/nokia users see it.
OK, the ameo is'nt a beauty and its not small, why would you want to make it uglier and bigger?
maybe you have a job where it gets knocked around alot (like a night shift raiding villages in iraq under mortar fire - (well noticed ice-coffee)
however, i think i know why you need to protect your valuable piece of kit, and also why making it uglier/undesirable and bigger/impossible to lift and steal.................
Ive a feeling brummagum is not a real place??? however it is code for "i live in birmingham but i want out!!!!
I have seen many a nice phone stolen and many a person in birmingham robbed by demented hoodies that could spell "ppc"!
good thinking!!!! Now, how do i produce a 100000volt current that pulses across the metal housing of the ameo and frys any would be muggers
Did you look at Pelican? With some modifying something like this may work for you:
http://pelican.com/cases_detail.php?Case=1060
You'll need to add some padding inside to keep the Athena form rattling around in there but you could utilize the extra space for accessories.
EDIT: This is IP67, not IP65 but, Christ, what are you going to do with it???
hedgemonstahinz said:
...however it is code for "i live in birmingham but i want out!!!!
I have seen many a nice phone stolen and many a person in birmingham robbed by demented hoodies that could spell "ppc"!
good thinking!!!! Now, how do i produce a 100000volt current that pulses across the metal housing of the ameo and frys any would be muggers
Click to expand...
Click to collapse
Yep, Birmingham, Twinned with downtown Baghdad.
To be fair, I think in my OP, I went a bit OTT with the description, and whilst it would be nice to have a device that can save me in the event of the common drive-bys that go down, it was more of a well padded crystal case, something along the lines of http://www.pdamods.com/proddetail.asp?prod=CRDLX50 that I was after.
Oh, if only I'd used the search...
http://forum.xda-developers.com/showthread.php?p=1965541
That Pelican 1060 case I linked to above also has a foam insert in the "Accessories" section.
It seems like there are a lot of good apps out there for exercise and what not. But it seems like that is going to be difficult if I carry it lose in my pocket.
Fitness Kit
Tmobile is coming out with a fitness kit for the sapphire..... comes with arm band, waist band and a bottle i believe.......
yeah, any idea When that is coming out?
emshon said:
yeah, any idea When that is coming out?
Click to expand...
Click to collapse
I just saw an armband for the mytouch at a Tmobile, but it was still behind the counter, so I think it's almost here.
I'm also waiting for it. I've been running with the phone in my pocket, but I get scared that it might get jostled to death.
they have armbands at walmart for ipods, I use it for biking. the phone fits perfectly with it and I can still use the touch screen also. its in the fitness section and its about $8.
http://www.youtube.com/watch?v=lu6aPYICvPw
wait and see what Tmo got
I have just ordered
iGadgitz Neoprene Gym Jogging Armband for Apple iPod Classic 80gb,
120gb & 160gb
Will post my findings, it got good ratings though.
Compared to ipod the Magic is like 10mm higher, 20mm thinner and not much slimmer. I THINK. Erm
EDIT: fits in well enough, feels secure, I like! I feel the need to mention Buddy runner here, awesome app.
t-mobile price tag $40.00, no thanks !
sgon said:
t-mobile price tag $40.00, no thanks !
Click to expand...
Click to collapse
They charge a lot for just about every accessory...
The rep at one of the t-mo stores here gave me the white charger and red gel for the price of the kit with the black charger and black gel...but I didn't get the mug included. Oh well, my wife got what she wanted for $10 less than I paid for them individually.
The store did not have the fitness kit. Wonder if they'll start selling the arm band separately. $5 arm band + $5 belt + $30 water bottle...lol.
There is a solution right now. I've used it for months on my Dream, but now that it's gone to that great cellphone store in the sky (phone died while flashing new rom) , I plan on using it for the Magic.
It all involves a case made by a company called Krusell. They make very high quality leather cases for both the magic and the dream . On the back is a mount that allows you to use your phone for running, bicycling, in your car, or just clip it in your pocket securely without the ugly clips that other companies use.
All of this is purchasable through Amazon.
Here is the link for the case for the Dream
http://www.amazon.com/Krusell-75431...12?ie=UTF8&s=wireless&qid=1256415764&sr=1-112
and here is the link for the sports pack
http://www.amazon.com/Krusell-Multi..._1_1?ie=UTF8&s=wireless&qid=1256416577&sr=1-1
Now I'm willing to bet with a little bit of creative effort (and some superglue) you could pick up a less expensive case , and just scavenge the mount off the back of it. (for example the blackberry pearl case uses the same mount, but its 1/2 the price off of Amazon.)
had pretty good experience with this armband
http://www.staples.com/Griffin-Streamline-Sport-Armband-for-iPod/product_792628?cmArea=SEARCH
It has some flaws: back is not insulated so I had to wear it over my sleeve, a little hard to operate through thick front skin. But in general it's inexpensive, fits pretty well and does it job
I bought this Tunebelt. It is for the iPod Touch but fits the Magic like a glove. There is a hole in the bottom for headphone connector and you can control your touch when running.
I also use Cardio Trainer from the market and it is great.
SAMBO, Do you still like the iGadgetz armband?
Any new good Arm Band?
Or
Is Tune Belt AB5 worth the extra 7 £ compared to iGadgitz Neoprene?
amazon.co.uk/iGadgitz-Neoprene-Jogging-Armband-Classic/dp/B000WBDD56/ref=dp_cp_ob_ce_title_0
amazon.co.uk/Tune-Belt-Neoprene-Sport-Armband/dp/B0006J2A4Y/ref=sr_1_1?ie=UTF8&s=electronics&qid=1282121171&sr=8-1
I have one question about the Igadgitz. Is it possible to connect your headphones i the center-bottom, where the usb is placed on an Magic? I cant find at picture that confirms this possibillity
I use this one for some months now and I am totally happy with it:
iarmbands.com/LARGE-ARM-Universal-fit-Arm-Band-uab-010.htm
You can connect your headphones through a hole at the bottom but I prefer a stereo bluetooth handsfree. I bought this one from ebay:
dealextreme.com/details.dx/sku.8422
Definitely it isn't the best around but it is very handy when running because you can easily pause/skip tracks/adjust volume.
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
I'm in the market for one too. I would like to buy it as a christmas gift for my Boss.
doalittledanse said:
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
Click to expand...
Click to collapse
i third this!
I am using this one here:
http://www.amazon.com/Holder-T-Mobi..._1_3?ie=UTF8&s=wireless&qid=1259151227&sr=8-3
It gets the job done. The suction works just fine, have had no instances of it coming off, and my phone has never come out of the mount. The only thing is, be careful with the ratcheting mechanism... when I first got mine I forced it a bit hard without pressing in the release button, and now it doesn't always stay centered and skips teeth sometimes but still works.
It has an open space in the center of the bottom so you can still connect power/audio. It holds the phone well, has rubbery foam on the side arms to grip the phone. For $10 its worth it, IMHO.
Head over to your local large electronics retailer (Best Buy, Future Shop, Radio Shacketc) and look in the GPS and IPhone sections. I bet you could also order it through Amazon.
I have seen the same mount under multiple brand names there. It is around $30 in Canada, so figure $20sh in the US. The one I have is called the "Grip-iT" by Scosche. Allows the phone to be held vertically and horizontally, has a longer flexible neck to position it and a really strong suction cup mount. Also comes with an adhesive mount disk if you have to mount it that way (some places don't allow windshield mounts).
I use it mostly in a fullsized pickup with a stiff suspension and have had no problems with it coming loose.
The one I have is this one:
http://www.scosche.com/products/sfID1/337/sfID2/344/productID/1593
I would stay away from this one as it is a PITA (at least in my GMC truck, which has fairly standard air vents) to mount:
http://www.scosche.com/products/sfID1/210/sfID2/337/productID/1594
What ever you do don't buy the cheap Bell brand mp3/pda window mount kit. They are usually found in the discount stores like Wal-Mart, K-mart, etc. The clamp swivel is loose, it can't keep the phone up at a pleasant viewing angle. If you hit a good bump the phone shoots out from the poor grip and the clamp closing by the pressure of the spring. Ugh, pure garbage and a great way to get in a car accident.
Off both of what you guys found and use, are they universal?? Meaning as in, can I swap my sapphire with my g1 or other devices. I guess I should just be asking if the width is very adjustable and or can you change the angle from portrait to landscape easily?? Thanks guys. Just doing my research before I ask for one for x-mas
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
stillriza said:
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
Click to expand...
Click to collapse
Thanks. That one looks pretty good. Just ordered it.
Awesome find... I just ordered one too. Thanks!
http://www.amazon.com/gp/product/B00470Q7X8/ref=s9_simh_gw_p107_d2_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=1EXAMQFNMYYRXNX1PBHC&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846
http://www.amazon.com/Vehicle-Verizon-Samsung-Fascinate-Galaxy/dp/B0043H2CE8/ref=pd_bxgy_cps_img_b
Ok I've been looking around for a desktop charger or window mount for our phones and found nothing. But yet the other Galaxy class phones have them. Also.. I think each desktop and window mount is diffrent cause I tried the one for verizons Fascinate and it just didn't fit. So that's kinda dumb not to try to keep the mount specs the same where you'd only need to have 1 desktop charger and 1 window mount type.
Have you seen this stand?
http://www.samsung.com/us/mobile/cell-phones-accessories/SGH-I917ZKAATT-product
yay.. kinda generic thoo nice thing about one where you plug your phone into it is you don't have to worry about the port getting damaged from plugging it in and leaving it lay around. eh maybe they'll make it in time because the ATT store doesn't even carry the captivate one.
i have th Samsung one http://www.samsung.com/us/mobile/cell-phones-accessories/ET-CS01SBEGXAR . It is just OK.
A better solution is to go to Wal*Mart and in their automotive section is this stand. It works great for only $8.
I bought 2 of these in black:
elago M2 stand and dock from Amazon (link not allowed - sorry) @ $24.99 each
I had to bend the bottom prongs out just a little to handle the BodyGlove hard case, but it sits nicely either portrait or landscape. Granted, they aren't cheap but they are nicely made and generic enough that I could use them with a host of different phones.
Hmmm pretty nice find.
http://elagostore.com/elago-M2-StandDock-For-iPhone-4/M/B002OLM56K.htm
Or another choice...
I just received the Clingo stand for my wife's Focus. I like it even more than the elago stand, and it costs about the same. Go to www dot clingo dot com to see it (their price is full retail - again, I bought it through Amazon for something like $25).
This stand has a 360 degree pivoting head and MAN is the grip on the phone strong. It has a feed hole in the stand for the power/sync cord. Perfect for the nightstand while charging.
-Dave
Hmm I was looking at the clingo but some people didn't give it a good rating and explained about it not really holding their phone too well. I was looking for something portable too like
http://www.amazon.com/gp/product/B00278ZQBQ/ref=ord_cart_shr?ie=UTF8&m=AZZOQCD4U42P0
or
http://www.amazon.com/gp/product/B003778T8I/ref=ord_cart_shr?ie=UTF8&m=A2D0IBDF2WHYZS
Key chainable one looks nice, and it looks to be a bottle opener too..
I'll probably get 2 of them to try out, because I've been sitting in the coffee shop using my cup to hold my phone up while watching podcasts.. lol
Stay away from the Crabble
The first link - I bought 2 of those a while back, and it SHOULD have been spelled "Crapple". It is nothing more than some stiff cardboard. In a couple of days the stands were virtually unusable and I ended up throwing them out. Seriously, not even a week's use.
The second one below looks interesting as a mobile stand. Still, I am really digging the Clingo stand so far, enough so that I am ordering the mobile version (they have one on the site which clings to a laptop while holding a phone). Granted, I have no long term data on how well this will stick, but it seems to be working great so far.
The best car holders I have found are those by ProClip USA. A little more expensive, but well worth it.
I just ordered my holder for my Focus.
http://www.proclipusa.com/
Erik Latranyi said:
The best car holders I have found are those by ProClip USA. A little more expensive, but well worth it.
I just ordered my holder for my Focus.
Click to expand...
Click to collapse
From the info it looks like the charging mount doesn't rotate.
If you have it can you do a quick review pls.
Erik Latranyi said:
The best car holders I have found are those by ProClip USA. A little more expensive, but well worth it.
I just ordered my holder for my Focus.
http://www.proclipusa.com/
Click to expand...
Click to collapse
this looks nice... very interesting... about $90 for the holder, charger, and vehicle specific mount...
Not sure it would work with my thick-arse casemate case on it though...
charge74 said:
From the info it looks like the charging mount doesn't rotate.
If you have it can you do a quick review pls.
Click to expand...
Click to collapse
I don't understand what you mean? It actually says tilt swivel in the title.
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512213-18503.aspx
munkeyphyst said:
I don't understand what you mean? It actually says tilt swivel in the title.
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512213-18503.aspx
Click to expand...
Click to collapse
Dooh. Guess that's what I get for skimming to the bottom.
This Holder tilts/angles 20 degrees for optimal viewing. It is a high quality custom made holder with a neat and discreet design. It keeps your device in an upright position for better reception. Easily slide your device in/out of the holder. No more fumbling around for your device. Provides for safer driving when viewing, accessing and operating your device in your vehicle.
Click to expand...
Click to collapse
Hey everyone,
I just wanted to post some pics of a stand that I put together. At first I bought one from BoxWave that they had up labeled as a Bamboo NOOKcolor stand.
http://www.boxwave.com/nookcolor-cradles-and-mounts/bamboo-nookcolor-stand/bwpdd/tpt-zfkf
Since I purchased it, they have changed the image on there website, though. Originally it was pretty misleading on the dimensions of the stand. I paid $30 for this thing and really it's only meant for a cellphone. It's absolutely way too small to hold up the NOOKcolor without tipping over.
Anyway, I liked the design of it so I went out and bought a bamboo cutting board from Walmart for $20 and cut it up into a bunch of pieces. I made myself a cardboard template based on that smaller stand I originally bought. I stacked all the pieces and then glued them together. I don't have a band saw so I found this really nice guy who has a shop over at Etsy who agreed to cut it out for me. He really did an awesome job. The link to his shop is here
http://www.etsy.com/people/irishmanswoodworks
in case anyone wants him to make one for you.
After I got it back from being cut out I sanded it up a bit more, put several coats of Tung oil and glued on a piece of felt. I think it came out really nice in the end. I attached some pics, so let me know what you guys think
That looks Amazingly Simple to do.
That is really quite snazzy!
I love it! Great work!
The only wood I'm good at working is ......
LOL tooo easy.
It does look beautiful. Does he use other exotic woods and stains?
I supplied the glued up bamboo board for him to cut, but I'm sure he can make it out of whatever you would want.
What a sweet stand. It looks really nice.
This is exactly what I'm looking for! I use XBMC in my living room and my Nook color is my remote. Thing is it runs out of juice all the time since I keep it on 24/7 and its a pain to charge. I'd like to see you drill a small square hold in the center of the bamboo where it can "dock" and run it out the back USB. Then we can run the usb to the AC outlet/USB Charger and have a Charging Dock!
Thats pretty awsome
Great work!