Does anyone know where the sounds are for the slide out keyboard, when you slide it out there is sound EX. Piano, Wind Chimes etc. Where is the sounds located in the phone, Windows? Because it would nice to change it to what you want, or have your own sound and convert it to the sounds that would work when you slide out your keyboard. Anyone know where it is?
rico002 said:
Does anyone know where the sounds are for the slide out keyboard, when you slide it out there is sound EX. Piano, Wind Chimes etc. Where is the sounds located in the phone, Windows? Because it would nice to change it to what you want, or have your own sound and convert it to the sounds that would work when you slide out your keyboard. Anyone know where it is?
Click to expand...
Click to collapse
Got this from another thread a while back - was going to just link to it, but couldn't find it so I attached the file here.
I actually turned mine off in the end though.
thanks so much, i probably will turn mine off too, but if you can get like an mp3 song that you like and just get a clip or something or like record your own voice that would make it lot better, and where is it in the phone though? someone needs to tell me how to create cabs.
I haven't tried the cab changing the sliding sound is a bit of a process.I only just figured this out and i had some inspiration from a post on Modaco.
The opening and closing sounds are wav files stored in the \windows directory on the phone. There are three files total and the naming convention of the existing files are: 1.wav; 1_in.wav, 1_out.wav. 1_in is the sound of the slider closing while 1_out is the slider opening. I'm not sure if you have to keep this convention or not and you'll understand why in a second.
Using a registry editor navigate to: HKLM>software>HTC>SlidingSound. Here you'll find the keys for the existing slider sounds (0-2 on an ATT Tilt rom). Inside each key are three values: default, in and out. If you check the properties of each value you'll find the name of the sound and the filename for the in and out sounds.
All you have to do at this point is to copy the entries into a new key with values to match your filenames. I kept the numerical sequence (0,1,2, 3).
The more I think about it I don't think you need the 1.wav file at all just the in and out wav files but that's the info I got from the Modaco form topic about changing the slider tone for the VOX. I'll have to try and see what happens. Hope this helps.
Oh yea it does, even though i might not be able to do its great to understand or know something about it, thank you so much
OK, ive created the wav files ( default, in, out) created the new key and new string value but i dont know how to create the value data which is where i think after i get i can create a cab, but i dont know where the numbers and letters lead.
just download the attached, and the sounds will show up in the drop down. just like that.
Interesting...volume control is done through the main settings volume menu?
Hmm, I've installed that .cab posted above, but I can't find it anywhere...
I've don this a couple of times but never used a cab to get it done. using a registry edit (phm, etc...) is much easier. put the .wav file in the phone windows folder on your phone and then use the editor to write the paths. do a serch for a link to detailed steps.
thanks
thanks for the sound cab for the sliding open and closed it worked really well, just a shame the lightsabre opening clip isnt long enough, seems to stutter then nothing,as for closing it sounds perfect
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
over2land said:
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
Click to expand...
Click to collapse
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
over2land said:
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
Click to expand...
Click to collapse
Try this CAB.
SH4YD33 said:
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
Click to expand...
Click to collapse
Thanks, but isn't that to modify existing sounds?
wpbear said:
Try this CAB.
Click to expand...
Click to collapse
WP, that did it. Thanks. I did notice a slow down in regen when the screen is going from portrait to landscape though. However, I end up with the link in settings/personal, and the same sounds I had before I flashed.
I am using Alex ATT MM 1.6 and the sounds work too, but I dont see the link in settings/personal.
EDIT: Reboot and found it.
hello seniors,
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab this file does what? is it the software that allows the phone play a sound when opens and closes? OR is it configure the sound of the sliding keyboard? if i hd the software of keyboard sliding sound built in when i got this phone do i need to install this .cab? thanks
ysw
total noob needs help with missing sliding sounds.
Hi I just downloaded the Tilt_SlidingSounds.CAB.
I then unzipped it on my computer and moved the folder containing the filles to my Vario III and put it in the windows folder. Using file explorer I found the folder opened it and hit setup. it worked but the sliding keyboard sound tweaker was placed in the windows folder too. So not saticefied with this I moved over the whole zip file to my phone and put it in my personal folder where I exicuted the cab. owever I could still only find it near the bottom of the windows folder and I want it in the settings/personal where my original one used to be before the phone got sent off for repair.
Although this tweaker works it only has 3 sounds to choose from. Is this right too?
Please give advice to all of this I am eager to learn and am still searching through the FAQs
Thanks
Hansaw
I've seen in this forum alot of complicated Appz developed and never heard about an application that simply lets you browse and choose your sliding sound without having to edit the registry.
In cheaper Cellphones you have the options to add them without any need of edditing nothing, just save it in the device and its there for you.
I mean or at least someone that can create a simple Appz for sliding Sounds?
Come on, Anyone?
Is it possible to change the clicking sound that you can enable?
are you talking about the sound when you either tap the screen or use a hard button?
If so the only way i'm aware of changing it is figuring out the filename of the sound. (I think its menupop but don't quote me on that) To find out for sure either play all the wavs in your windows folder or go through your notification sounds under sounds & notifications. Then find the sound you want and convert it to wave and the proper bit rate, rename it to the sound you want to replace and overwrite the original file in the Windows folder.
Also another way is finding the registry key that refers to that sound and adjusting it to the new sound you want.
does anybody know how to make your htc fuze make a sound when you slide to open the keyboard and can you set it to which ever sound you want
with my TP I went to keyboard sound and set any theme there, then went to registry and modify in HKLM-> Software -> HTC -> Sliding Sound and modify one of the entries, put the files u wanna use in your windows folder and then match the names to the entries in there
thnx
thanks it worked
Never mind, misread answer post...